Zur Bestimmung N-substituierter Aniline mit Natriumchlorit

Zusammenfassung Es wird eine photometrische Bestimmungsmethode beschrieben für Anilin (40–720 g/ml), Monoäthylanilin (90–1650 g/ml) und Diäthylanilin (100–1600 g/ml) mit Natriumchlorit in äthanolisch-wäßrigen Lösungen, sowie für Diäthylanilin (85–1140 g/ml) und Dimethylanilin (30–330 g/ml) neben den primären und sekundären Aminen in essigsaurer Lösung mit demselben Reagens. Das Verfahren liefert gute Ergebnisse.

---

Summary A photometric procedure is described for the determination of aniline (40–720 g/ml), monoethylaniline (90–1650 g/ml), and diethylaniline (100–1600 g/ml) with sodium chlorite in aqueous ethanolic solutions and of diethylaniline (85–1140 g/ml) and dimethylamline (30 to 330 g/ml) in presence of the primary and secondary amines in acetic acid solution using the same reagent. Good results have been obtained,

     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Study of the absorption spectra of the 4f electron transition of the Nd and Er complexes with 2-isobutylformyl-1,3-dione-indane in the presence of TX-100 and its analytical application

The absorption spectra of 4f electron transitions of the systems of neodymium and erbium with 2-isobutylformyl-1,3-dione-indane and TX-100 have been studied by normal and derivative spectrophotometry. Their molar absorptivities at the maximum absorption bands are about 7.2 (at 571 nm) times greater for neodymium and 13.1 (at 519 nm) times greater for erbium than those in the absence of the complexing agents. Use of second derivative spectra both eliminates the interference from other rare earths and increases the sensitivity from neodymium and erbium. Beers law is obeyed from 020 g/ml for neodymium and 025 g/ml for erbium. The relative standard deviations are 1.2% and 1.6% for 5.0 g/ml of neodymium and 8.0 g/ml of erbium, respectively. The detection limits (signal-to-noise ratio=2) are 0.14 g/ml and 0.20 g/ml. A method for the direct determination of neodymium and erbium in rare earth mixtures with good accuracy and selectivity is proposed.     

Pyrethroids as household insecticides: analysis, indoor exposure and persistence

Summary Natural pyrethrins from insecticidal pyrethrum extract and pyrethroids (e.g. allethrin, tetramethrin, permethrin, cyphenothrin, cypermethrin, cyfluthrin) are active ingredients in insecticidal formulations such as powder, sprays, impregnated paper for electro-evaporators, mosquito coils, and solutions for wood treatment, all mainly intended for indoor use. Some commercial preparations contain also non-pyrethroid insecticides, such as dichlorovos, propoxur, or phoxim, and piperonyl butoxid as synergist. High-resolution gas-chromatography with oncolumn injection and FID and ECD detection is employed for the analysis of these insecticides in commercial formulations, in air during and after indoor application, and as residues on surfaces. The total input of pyrethroids into a large room amounts to 1 to 30 mg. The concentrations of the pyrethrins and pyrethroids in air (2 to 300 g/m³) and their deposition on surfaces (up to 1000 g/m²) reveal possible exposure of humans by inhalation (e.g. 30 g allethrin or 60 g tetramethrin) or by skin resorption (e.g. 200 g allethrin and up to 1000 g tetramethrin). The insecticides deposited on surfaces and some readily formed transformation products persist for 60 h or longer.Partly presented at the 7th International Congress of Pesticide Chemistry in Hamburg, August 5–10, 1990     

Photometrische Bestimmung von Zink mittels Indo-oxins

Zusammenfassung Es wird eine photometrische Zinkbestimmung für Konzentrationen von 0,1 bis 100g Zn/ml beschrieben. Die Eigenart der Reaktion mit Indo-oxin macht eine Einteilung der überhaupt zu erfassenden Konzentrationen in die Bereiche von 100 bis 10g, bzw. von 10 bis 1g, bzw. von 1 bis 0,1g Zn/ml erforderlich. Die optimalen Bedingungen für die analytische Untersuchung dieser einzelnen Konzentrationsbereiche werden angegeben. Der Fehler der einzelnen Bestimmungen beträgt ±1%.

---

Summary A photometric method is described for the determination of zinc at concentrations of 0.1 to 100g Zn/ml. The singularity of the reaction with indooxine makes it necessary to segregate the concentrations to be determined into the ranges 100 to 10g, or 10 to 1g, or 1 to 0.1g Zn/ml. The optimal conditions for the analytical investigation of these single concentration ranges are given. The error of the single determinations is ±1%.

---

Résumé On décrit un procédé pour le dosage photométrique du zinc pour des concentrations de 0,1 à 100g de zinc par ml. L'aspect particulier de la réaction avec l'indo-oxine rend nécessaire un partage, en général, en différentes zones de concentrations appropriées, soit de 100 à 10g, soit de 10 à 1g, soit de l à 0,1g de zinc par ml. Les conditions optimum pour la recherche analytique de ces conditions de concentration particulières sont données. L'erreur des dosages isolés s'élève à ±1%.

     

Determination of tetraethyllead and tetramethyllead using high performance liquid chromatography and electrochemical detection

Summary A new method for the separation of tetramethyllead (TML) and tetraethyllead (TEL) was developed using high-performance liquid chromatography. The electrochemical detection was examined with different electrodes. Amperometric and pulse-amperometric techniques were investigated and the optimal working potential for each electrode was determined. Linearity for the glassy carbon electrode was observed between 350 ng and 30 g; the detection limit is 310 ng (TML) resp. 340 ng (TEL). In case of the mercury gold electrode the linearity range was 300 g–3 g and the detection limit 1.5 m (TML) resp. 1.7 g (TEL).     

Determination of traces of sodium alkylbenzenesulphonate by high-performance liquid chromatography. Application to water

Summary For the trace determination of sodium alkylbenzenesulphonate (ABS) by HPLC the following conditions were employed: Shimadzu ZORBAX SIL Column (5 m, 4.6 mm i.d. x 150 mm) as stationary phase, 0.2% ammoniaethanol (v/v) as mobile phase, UV detector at 225 nm, injection volume 12 l. The chromatograms of ABS were simple and sharp (detection limit of ABS 0.02 g in 12 l of ethanol). The calibration curves of ABS were linear in a concentration range of 0.03 0.3 g in 12 l of ethanol. In the case of linear sodium dodecylbenzenesulphonate positive errors of 1 4% were caused by non-ionic surfactants or laurylsulphate (6 times excess), 10 50% positive errors were caused by 2 6 times excess of household detergents.Standard water samples containing ABS were treated with a weak base anion-exchange resin, the adsorbed ABS were eluted, and then determined either by HPLC or by the methylene blue spectrophotometric method. Recoveries of ABS in water were about 92 107% by HPLC.

---

Bestimmung von Spuren Natriumalkylbenzolsulfonat mit Hilfe der HPLC. Anwendung auf Wasser

Zusammenfassung Für die Spurenbestimmung von Natriumalkylbenzolsulfonat (ABS) durch HPLC werden die folgenden Bedingungen empfohlen:Shimadzu ZORBAX SIL (5 m, 4,6 mm x 150 mm) als stationäre Phase, 0,2% Ammoniak/Ethanol als mobile Phase, UV-Detektor bei 225 nm, Injektionsvolumen 12 l. Die erhaltenen Chromatogramme sind einfach und scharf (Nachweisgrenze 0,02 g in 12 ml Ethanol). Die Eichkurven sind im Konzentrationsbereich von 0,03–0,3 g in 12 l Ethanol linear. Im Falle des linearen Natriumdodecylbenzolsulfonats werden bei Anwesenheit von nicht-ionischen oberflächenaktiven Substanzen oder von Laurylsulfat in 6fachem Überschuß positiver Fehler von 1–4% erhalten; bei 2–6fachem Überschuß von Haushaltswaschmitteln ergeben sich positive Fehler von 10–50%.Standard-Wasserproben werden zunächst einer Behandlung mit einem Anionenaustauscher unterzogen, die adsorbierten ABS eluiert und durch HPLC oder nach der Methylenblaumethode analysiert. Wiederfindungsraten liegen bei 92–107%.

     

Fällungsanalyse im Mikrogrammbereich: Eine neue Methode

Zusammenfassung Eine neue Methode zur Durchführung gravimetrischer Bestimmungen im Mikrogrammbereich wurde beschrieben; diese beruht im wesentlichen darauf, daß der Niederschlag nicht mehr zusammen mit dem Filter, sondern nach Überführen mit einem geeigneten Lösungsmittel in einem separaten Wägegefäß gewogen wird.Die dazu nötigen Geräte und deren Herstellung wurden beschrieben. Nach dieser Methode wurden folgende Bestimmungen mit zufriedenstellender Richtigkeit durchgeführt: 2,5–25g Al, 5–50g Cu und 5–50g Zn mit Oxin, 2,5–25g Fe(III) und 2,5–25g Ti(IV) mit N-Benzoyl-phenylhydroxylamin, 5–50g Ni und 5–50g Cu mit Salicylaldoxim, 2,5–50g Co(II) und 2,5–50g Fe(III) mit -Nitroso--naphthol sowie 5–50g Chlorid als Silberchlorid.

---

Precipitation analysis in the microgram-scale: A new method

Summary A new method for gravimetric determinations in the microgram-scale is described. This method is based on the fact that the precipitate is not weighed together with the filter but is transferred to a separate weighingvessel using a suitable solvent. The necessary simple devices and their use are described. The following determinations were carried out with satisfying accuracy: 2,5–25g Al, 5–50g Cu and 5–50g Zn with Oxine, 2,5–25g Fe and 2,5–25g Ti withN-benzoylphenylhydroxylamine, 5–50g Ni and 5–50g Cu with salicylaldoxime, 2,52–50g Co and 2,5–50g Fe with -nitroso--naphthol and 5–50g chloride as silver chloride.

     

Selective determination of neodymium and erbium in mixtures with other lanthanides by second-derivative spectrophotometry of complexes with benzoyl-indan-1,3-dione and cetylpyridinium chloride

The absorption spectra of 4f electron transitions of the neodymium and erbium complexes with benzoyl-indan-1,3-dione and cetylpyridinium chloride have been studied by conventional and derivative spectrophotometry. The second-derivative spectrum has been used to eliminate the interference of the other lanthanides, and to increase the sensitivity by a further factor of 4–6. Beer's Law is obeyed for 6–29 g/ml Nd and 7–33 g/ml Er. The relative standard deviations evaluated from 10 independent determinations of 5.0 g/ml Nd and Er were 1.1% (Nd) and 1.6% (Er). The detection limits obtained from the sensitivity of the calibration graphs and 3s _b, (standard deviation of the blank,n = 11) were 0.63 g/ml Nd and 0.61 g/ml Er. The quantification limits (10s _b) were 2.1 g/ml Nd and 2.0 g/ml Er. A method for the direct determination of neodymium and erbium in rare earth mixtures with good accuracy and selectivity is proposed.     

On the use of azo dyes for the spectrophotometric determination of uranium and thorium in mixed solvents

Summary Solochrome Black 6 BN in an acetate buffered medium containing methanol reacts with U(IV) to give a blue complex which permits photometric determination with 5g U/ml to 100g U/ml.In the presence of zinc acetate, uranyl ion also may be spectrophotometrically determined by means of the same dye. From 2g U/ml to 40g U/ml may be determined with a relative error of less than ± 0.05.

---

Zusammenfassung Es werden zwei Methoden zur spektrophotometrischen Bestimmung von Uran mittels Solochromschwarz 6 BN beschrieben. Dieser Farbstoff bildet mit U(IV) in acetatgepuffertem, methanolhältigem Medium einen blaugefärbten Komplex, der die Bestimmung von 5 bis 100g U/ml erlaubt.Mit demselben Farbstoff lassen sich auch 2 bis 40g U/ml in Lösungen von Uranylchlorid bestimmen.

---

Résumé Le noir solochrome 6 BN en milieu tampon acétique contenant du méthanol réagit avec U-IV en donnant un complexe bleu qui permet le dosage photométrique de 5 g U/ml à 100 g U/ml.En présence d'acétate de zinc, on peut aussi doser l'ion uranyle par spectrophotométrie avec le même colorant. On peut doser de 2 g U/ml à 40 g U/ml avec une erreur relative inférieure à ± 0,05.

     

Semiautomatic determination of furazolidone and furaltadone by continuous and stopped flow FIA methods

New methods are proposed for the semiautomatic determination of furazolidone and furaltadone by photometric flow injection or stopped flow FIA analysis, on the basis of their alkaline hydrolysis reactions. Linear calibration graphs between 1 and 30 g/ml are obtained for both compounds, the detection limits for furazolidone and furaltadone being 0.20 and 0.26 g/ml, respectively, by flow injection and 0.27 and 0.21 g/ml by the stopped flow approach.     

Grenzkonzentration und Erfassungsgrenze quantitativer Analysenmethoden. Berechnung dieser Kennzahlen für (spektral-)photometrische Verfahren

Zusammenfassung Es wird vorgeschlagen, den unteren Anwendungsbereich quantitativer Methoden ebenso wie in der qualitativen Mikroanalyse durch die Begriffe Grenzkonzentration und Erfassungsgrenze zu kennzeichnen. Durch die Ableitung dieser Werte nach mathematisch-statistischen Regeln erhalten Grenzkonzentration und Erfassungsgrenze den Charakter objektiver Kennzahlen. Für photometrische und spektralphotometrische Methoden werden Gleichungen zur Berechnung der Grenzkonzentration ing/ml und in Prozent der Probe, sowie der Erfassungsgrenze ing Substanz angegeben. Berechnungsgrundlagen sind die Streuung der Blindwerte, der molare Extinktionskoeffizient oder der Sandellsche Empfindlichkeitsindex und andere analytische Parameter.

---

Summary It is suggested that the lower application region of quantitative methods, just as in the case of qualitative microanalyses, be characterized by the concepts limiting concentration and detection limit. These values acquire the character of objective coefficients when they are derived in accord with mathematical-statistical laws. Equations for calculating the limiting concentration ing/ml and in % of the sample, as well as the detection limit ing of the material, are given for photometric and spectrophotometric methods. The bases for the calculation are the dispersion of the blank values, the molar extinction coefficient, or the Sandell sensitivity index and other analytical parameters.

---

---

Herrn Professor Dr.Hans Lieb aus Anlaß seines 80. Geburtstages gewidmet.     

The spectrophotometric determination of thorium with eriochrome black T

Summary From 0.5 to 20g Th/ml may be determined with Eriochrome Black T in acetate buffered solution. Fewer ions interfere if the determination is performed in hydrochloric acid solution, but the lower limit is raised to 1g Th/ml.

---

Zusammenfassung 0,5 bis 20g Th/ml können mit Eriochromschwarz T in acetatgepufferter Lösung bestimmt werden. Photometriert man in salzsaurer Lösung, so stört zwar eine geringere Zahl von Fremdionen, aber die untere Konzentrationsgrenze erhöht sich auf 1g Th/ml.

---

Résumé On peut doser 0,5 à 20g Th/ml par le Noir Eriochrome T en solution tamponnée à l'acétate. Peu d'ions interfèrent si l'on réalise le dosage en solution acide chlorhydrique mais la limite inférieure se situe alors à 1g Th/ml.

     

Determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry

A new method is proposed for the determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry at 491 nm in a medium of 0.09 mol/1 sulphuric acid. A linear relationship exists between d³A/d³ and theo-Cresol Red concentration (1–12 g/ml), with a standard deviation of 0.11 g/ml (n = 8) for 10 g/ml ofo-Cresol Red.Presented at the 34th IUPAC Conference (1993)     

Addition of HCl to a Cluster-Bound Vinylidene Ligand: Preparation and Structure of Ru5(μ3-SMe)(μ3-CMe)(μ-Cl)(μ-SMe)(μ-PPh2)2(CO)9·PhMe

Addition of aqueous HCl to Ru₅( ₃-C=CH₂)(-SMe)₂(-PPh₂)₂(CO)₁₀ afforded the structurally characterized carbyne complex Ru₅( ₃-SMe)( ₃-CMe)(-Cl)(-SMe)(-PPh₂)₂(CO)₉, formed by addition of H to the vinylidene ligand; a Cl atom bridges an Ru–Ru bond.     

Determination of traces of iron and gallium in high-purity aluminium

Summary A procedure is described suitable for determining iron and gallium down to the levels present in 99.999% pure aluminium. Copper, cobalt, manganese, and lanthanum do not interfere. A single determination takes about two hours.The precision of the method is within 0.1g iron at the 2-g iron level and within 0.4g of gallium at the 2-g gallium level per gram of metal.

---

Zusammenfassung Ein Verfahren zur Bestimmung von Bisen und Gallium in 99,999%igem Aluminium wird beschrieben. Kupfer, Kobalt, Mangan und Lanthan stören nicht. Eine Einzelbestimmung dauert ungefähr 2 Stunden. Die Genauigkeit des Verfahrens beträgt 0,1g Fe und 0,4g Ga bei Anwesenheit von 2g des betreffenden Elementes pro Gramm Metall.

---

Résumé On décrit un procédé permettant le dosage du fer et du gallium jusqu'aux teneurs présentes dans l'aluminium pur à 99,999%. Le cuivre, le cobalt, le manganèse et le lanthane n'interfèrent pas. Un seul dosage demande environ 2 heures.La précision de la méthode est de 0,1g de fer pour 2g de fer présent et de 0,4g de gallium pour 2g de gallium présent par gramme de métal.

     

Bestimmung von Ascorbinsäure auf Grund ihrer in einem Landolt-System ausgeübten reduzierenden Wirkung

Zusammenfassung Im Bromat-Jodid-Ascorbinsäure-System hängt die Zeit, die bis zur Jodausscheidung vergeht, von der Konzentration der Ascorbinsäure ab. Unter entsprechenden Versuchsbedingungen ist die Reaktionszeit proportional der Ascorbinsäurekonzentration. Danach kann die Ascorbinsäure sowohl mit Hilfe der Simultankomparationsmethode, als auch chronometrisch bestimmt werden. Die Genauigkeit ist ± 3% im Bereich von 5 bis 300g/5 ml. Die Grenzen der Bestimmung sind 1g bzw. 1000g Ascorbinsäure in 5 ml.

---

Determination of ascorbic acid on the basis of its reducing action in a landolt system

Summary In the bromate-iodide-ascorbic acid system, the time that elapses until the iodine appears is dependent on the concentration of the ascorbic acid. Under appropriate experimental conditions, the reaction time is proportional to the ascorbic acid concentration. Accordingly, the ascorbic acid may be determined with the aid not only of the simultaneous comparison method but also chronometrically. The precision is ± 3% in the 5–300g/5 ml range. The limits of the determination are 1g and 1000g ascorbic acid in 5 ml respectively.

     

Preconcentration and determination of naphthalene in air and water using activated carbon adsorption,carbon disulfide extraction and gas chromatography

A new method for the determination of naphthalene in air and water has been developed. The naphthalene was preconcentrated using activated carbon adsorption with carbon disulfide extraction and determined by gas chromatography with flame ionization detection. The chromatographic peak of naphthalene was separated well from the potential interferents turpentine, terpenene, isoborneol, camphor and isobornyl acetate. The detection limit was 0.52 g/ml of CS₂, equivalent to 2.6 g/m³ of air or 0.05 g/ml in 50 ml of water. The precision for 10 g/ml naphthalene was 1.7%. The adsorption capacity, sampling efficiency and desorption efficiency of 100 mg of activated carbon for naphthalene in air were 8.8 mg, 98.8% and 95.2%, respectively. The extraction efficiency of 5 ml of carbon disulfide for naphthalene in water was 97.6%. The method was successfully applied to the determination of naphthalene in air and water from an industrial plant.