Robotic preparation of metal samples for analysis by plasma emission spectrometry

Summary A method utilizing a laboratory robotic system to automate sample preparation for the chemical analysis of metals was developed. Anticipated elemental concentration values for samples are entered into the robotic system, and the system determines the needed sample weights and calibration solution concentrations. The robot then weighs, dissolves, and dilutes the samples and prepares calibration solutions prior to multi-elemental analyses by inductively-coupled plasma — atomic-emission spectrometry. Zinc-base alloy standard reference materials were used to evaluate this method. For a batch of ten samples, operator times compared with a similar manual method were reduced by about 5-fold. Precision and accuracy data for samples prepared by robotic and manual methods were equivalent.

---

Automatische Probenvorbereitung für die Analyse durch Plasma-Emissions-Spektrometrie mit Hilfe eines Laborroboters

     

Comparison of different water-miscible solvents for the preparation of plasma and urine samples in metabolic profiling studies

The Lowry method and a capillary electrophoresis method were used to analyse protein residues in the supernatant after solvent deproteination of plasma. Acetonitrile and acetone were much more effective than methanol and ethanol at reducing the levels of proteins in plasma. The ability of different solvents to decrease levels of phospholipids in plasma samples was assessed using electrospray ionisation mass spectrometry (MS). Phospholipid signals can obscure differences between samples in general metabolite profiling (i.e. non-target compound) studies. Acetonitrile was much more effective than methanol in reducing the MS signal due to phospholipids in plasma which is a consequence of the poor solubility of phospholipids in acetonitrile. The capability of the solvents at reducing salts in urine samples was also studied by using an amperometric method. Using this approach little difference was detected between methanol, ethanol, acetonitrile and acetone in their ability to desalt urine samples.     

基于高通量解析算法的复杂样品重叠气相色谱-质谱信号的快速分析

化学计量学算法为重叠气相色谱-质谱(GC-MS)信号的解析提供了有效手段,但其在计算过程中一般需要将数据进行分段处理,然后只对信号的某些区间进行解析,难以实现真正意义上的高通量分析。该文结合移动窗口目标转换因子分析(MWTTFA)和非负免疫算法(NNIA),建立了一种高通量解析方法。首先,根据所有可能存在的目标组分的标准质谱信息,利用MWTTFA检验复杂信号中存在的组分,并确定目标组分的质谱信息和洗脱时间区域。以得到的质谱信息作为后续计算的输入值,利用NNIA解析得到相应的色谱信息。采用快速升温程序对17种和42种农药混合标准样品的GC-MS信号进行分析,利用所建立的方法可在10 min内得到全部组分的色谱和质谱信息。     

Three-phase double-arc plasma for spectrochemical analysis of environmental samples

A new instrument, which uses a three-phase current to support a double-arc argon plasma torch for evaporation, atomization and excitation of solid or powder samples, is described. The sampling arc is ignited between the first and second electrode while the excitation arc is ignited between the second and third electrode. Aerosol generated from the sample (first electrode) is swept by argon gas, through a hole in the second electrode (carbon tubing electrode), into the excitation plasma. A tangential stream of argon gas is introduced through an inlet orifice as a coolant gas for the second electrode. This gas stream forces the excitation arc discharge to rotate reproducibly around the electrode surface. Discharge rotation increases the stability of the excitation plasma. Spectroscopic measurements are made directly in the current-carrying region of the excitation arc. An evaluation of each parameter influencing the device performance was performed. Analytical calibration curves were obtained for Fe, Al, K, and Pb. Finally, the present technique was applied for the analysis of environmental samples. The present method appears to have significant, low cost analytical utility for environmental measurements. Received: 7 July 2000 / Revised: 6 September 2000 / Accepted: 10 September 2000     

PIXE eleemental analysis of erythrocyte and blood plasma samples from human pregnancies

Elemental concentrations of P, S, Cl, K, Ca, Fe, Ni, Cu, Zn, Br, Rb have been determined in erythrocyte and blood plasma samples from normal and diabetic human pregnancies. Average values, the dependence of the concentrations on the time during gestation period, the correlation coefficients for pairs of elements as well as for the same elements in plasma and erythrocyte samples are given. A marked difference appeared in a number of cases between normal and diabetic pregancies.     

Three-phase double-arc plasma for spectrochemical analysis of environmental samples

A new instrument, which uses a three-phase current to support a double-arc argon plasma torch for evaporation, atomization and excitation of solid or powder samples, is described. The sampling arc is ignited between the first and second electrode while the excitation arc is ignited between the second and third electrode. Aerosol generated from the sample (first electrode) is swept by argon gas, through a hole in the second electrode (carbon tubing electrode), into the excitation plasma. A tangential stream of argon gas is introduced through an inlet orifice as a coolant gas for the second electrode. This gas stream forces the excitation arc discharge to rotate reproducibly around the electrode surface. Discharge rotation increases the stability of the excitation plasma. Spectroscopic measurements are made directly in the current-carrying region of the excitation arc. An evaluation of each parameter influencing the device performance was performed. Analytical calibration curves were obtained for Fe, Al, K, and Pb. Finally, the present technique was applied for the analysis of environmental samples. The present method appears to have significant, low cost analytical utility for environmental measurements.     

On-line parallel reversed phase two-dimensional liquid chromatography for high-throughput analysis of complex proteomic samples

A comprehensive two-dimensional liquid chromatographic system (2D SCX/RP) is con- structed with a 10-port-2-way valve using strong cation exchange chromatography (Hypersil SCX, 100 mm×4.6 mm I.D.) followed by reversed phase chromatography (Hypersil BDS C18, 15 mm×4.6 mm I.D.) to separate the complex peptides from globin peptic hydrolysate. After the sample was loaded on the SCX column, the phosphate buffer (pH 4.0) was used to elute the peptides. Then, elutes flowed through the interface and the peptides focused on the head of the trapping columns (Hypersil BDS C18, 15 mm×4.6 mm I.D.) but salt passed into the waste. After the valve was switched, the samples were flushed with a backward flow into the RP analytical column. The peptides on the SCX were eluted with 12 discontinuous steps linearly increasing salt concentrations. The peptides enriched on the trapping column were desalted and separated by the RP columns. The resolution and the resolved peaks of the 2D SCX/RP system were greatly increased and the total peak capacity reached as high as 2280.     

A new approach to the effective preparation of plasma samples for rapid drug quantitation using on-line solid phase extraction mass spectrometry.

A procedure that permits rapid development of an optimized solid phase extraction (SPE) method for the analysis of drugs in plasma by on-line solid phase extraction-mass spectrometry (SPE-MS) has been developed. This procedure employs the concept of manipulating the pH and the percentage of organic solvent in the chromatographic mobile phase to affect the retention behaviors of both the matrix components and the analytes of interest. This resulted in the effective removal of matrix interferences from biological samples during SPE. During a the method development, only generic HPLC gradient approaches were needed, and multiple samples were pooled so that several SPE methods could be investigated at once. The analysis time per sample was 1.3 minutes. Thus, the time involved in the entire method development (analysis of a set of samples) was less than one hour. With the knowledge of the retention behaviors of the analytes with respect to the pH and the percentage of organic, it was then possible to compose an optimized SPE-MS method. This method consisted of a base/organic and then an acid/organic washing step, followed by a rapid gradient elution step. Due to the rigorous washing procedure, most matrix interferences were removed, and analytes eluted off the SPE sorbent suffered from very little matrix interference. Thus, quantitation of drugs in plasma by a single quadrupole mass spectrometer could be accomplished, something that was not possible when only a generic gradient was used for on-line SPE-MS. In addition, both external and internal calibration curves could be obtained for the concentration range from 5 to 500 ng/mL with correlation coefficients of 0.99 (using 1/x as a weighting factor) and relative standard deviations (RSDs) less than 10%. The results achieved were comparable to those obtained by the use of a triple quadrupole mass spectrometer. Moreover, the robustness of the method was tested by continuously injecting plasma samples. During 136 runs, the absolute peak area variation for these three basic drugs was less than 15% without taking the signal variation from the mass spectrometer into account. Significantly, the on-line developed method can be directly transferred to a 96-well format SPE plate.     

Combinatorial approach toward high-throughput analysis of direct methanol fuel cells

A 40-member array of direct methanol fuel cells (with stationary fuel and convective air supplies) was generated by electrically connecting the fuel cells in series. High-throughput analysis of these fuel cells was realized by fast screening of voltages between the two terminals of a fuel cell at constant current discharge. A large number of voltage-current curves (200) were obtained by screening the voltages through multiple small-current steps. Gaussian distribution was used to statistically analyze the large number of experimental data. The standard deviation (sigma) of voltages of these fuel cells increased linearly with discharge current. The voltage-current curves at various fuel concentrations were simulated with an empirical equation of voltage versus current and a linear equation of sigma versus current. The simulated voltage-current curves fitted the experimental data well. With increasing methanol concentration from 0.5 to 4.0 M, the Tafel slope of the voltage-current curves (at sigma=0.0), changed from 28 to 91 mV.dec-1, the cell resistance from 2.91 to 0.18 Omega, and the power output from 3 to 18 mW.cm-2.     

Target preparation of biological samples for trace element analysis using nuclear techniques

An easy and rapid method for preparing biological targets for trace element analysis using nuclear techniques involving charged particle beams is described. The targets are thin, homogeneous and uniform. They withstand 100 nA of 1–2 MeV proton beams and of 5–10 MeV alpha beams for about 10 hrs.     

A sensitive capillary GC-MS method for analysis of topiramate from plasma obtained from single-dose studies

Topiramate (Topamax®) is an antiepileptic medication used as adjunctive and monotherapy in patients with epilepsy and for migraine prophylaxis. A GC‐MS assay was developed that was capable of detecting topiramate plasma concentrations following a single rectal or oral dose administration. Topiramate plasma samples were prepared by solid‐phase extraction and were quantified by GC‐MS analysis. The topiramate standard curves were split from 0.1 to 4 µg/mL and from 4 to 40 µg/mL in order to give a more accurate determination of the topiramate concentration. The accuracy of the standards ranged from 94.6 to 107.3% and the precision (%CV) ranged from 1.0 to 5.3% for both curves at all concentrations. The %CV for quality controls was <7.6%. The assay is both accurate and precise and will be used to complete future pharmacokinetic studies. Copyright © 2012 John Wiley & Sons, Ltd.     

Short-column CE coupled with inductively coupled plasma MS for high-throughput speciation analysis of chromium

A method was developed for high-throughput speciation analysis of chromium by on-line coupling of short-column capillary electrophoresis (SC-CE) and inductively coupled plasma mass spectrometry (ICP-MS). Baseline separation of Cr(III) and Cr(VI) was achieved within 1 min by SC-CE in a 15 cm x 75 microm id fused-silica capillary at 6 kV using 15 mM HNO(3) as running electrolyte. The precisions (RSD, n = 5) of migration time and peak area for Cr(III) and Cr(VI) were in the range of 1.8-2.4% and 2.2-5.7%, respectively. The limits of detection (3sigma) of Cr(III) and Cr(VI) were 1.8 and 1.9 microg/L, respectively. The synthesized samples containing Cr(III) and Cr(VI) species were determined by the developed SC-CE-ICP-MS hyphenated technique, and the recoveries of Cr(III) and Cr(VI) in the synthesized samples were in the range of 103-110% and 90-108%, respectively.     

A strategy for high-throughput analysis of levosimendan and its metabolites in human plasma samples using sequential negative and positive ionization liquid chromatography/tandem mass spectrometric detection

Levosimendan (Simdax) is an approved drug in approximately 40 countries and currently in phase III clinical studies in the USA and Europe. An accurate, high-throughput and rugged assay is critical to support these clinical trials. Due to the mechanism of drug metabolism, the drug and its active metabolites often have significant differences in their chemical properties. In order to achieve high assay throughput and low sample volumes, a single bioanalytical assay for the drug and its metabolites is preferred. However, this need may prevent the optimization of both high-performance liquid chromatography (HPLC) and mass spectrometric ionization conditions. The chemical properties of levosimendan are significantly different from those of its two active metabolites, OR-1855 and OR-1896. Here, we present a novel strategy for high-throughput analysis of levosimendan and its metabolites. A 96-well liquid/liquid extraction procedure was developed for sample preparation. A single liquid chromatography/tandem mass spectrometry (LC/MS/MS) system with two separate mobile phases, shared backwash solvent and conditioning solvent, was developed to perform sequential LC separation for levosimendan and the metabolites. Levosimendan was eluted by 5 mM ammonium acetate in 33.3% acetonitrile and detected using negative ionization mode MS/MS monitoring. The metabolites were eluted by 5 mM ammonium acetate and 0.2% acetic acid in 20% acetonitrile and detected with positive ionization mode MS/MS monitoring. The method has been demonstrated to have excellent precision and accuracy, with high assay ruggedness during method validation and clinical sample analysis. The linear dynamic ranges were approximately 200-50,000 pg/mL for levosimendan and approximately 500-130,000 pg/mL for both metabolites. The coefficient of determination (r2) for all analytes was greater than 0.9985. The intra-assay %CVs for QC samples were from 0.9% to 2.0% for levosimendan, 0.9% to 3.2% for OR-1855, and 0.4% to 4.9% for OR-1896. The inter-assay %CVs for QC samples were from 1.2% to 1.8% for levosimendan, 1.3% to 2.7% for OR-1855, and 1.4% to 3.4% for OR-1896. The mean % biases for QC samples were from 1.5% to 5.5% for levosimendan, -1.4% to 2.6% for OR-1855, and -0.3% to 4.5% for OR-1896. By using a single extraction approach coupled with sequential LC/MS/MS analysis for levosimendan and its metabolites, the assay maintained high throughput and low sample volume usage.     

A high-throughput approach for the determination of pesticide residues in cucumber samples using solid-phase microextraction on 96-well plate

A high-throughput solid-phase microextraction (SPME) on 96-well plate together with gas chromatography–mass spectrometry (GC–MS) was developed for the determination of some selected pesticides in cucumber samples. Pieces with the length of 1.0 cm of silicon tubing were precisely prepared and then coated on the end part of stainless steel wires. The prepared fibers were positioned in a home-made polytetrafluoroethylene (PTFE)-based constructed ninety-six holes block to have the possibility of simultaneous immersion of the SPME fibers into the center of individual wells. Pesticides such as diazinon, penconazol, tebuconazol, bitertanol, malathion, phosalone and chlorpyrifos-methyl were selected for their highly application in cucumber field. The performances of the SPME fibers, such as intra and inter-fibers reproducibility, were evaluated and the results showed a good similarity in extraction yields. A volume of 1 mL of the aquatic supernatant of the cucumber samples was transferred into the 96-well plate and the array of SPME fibers was applied for the extraction of the selected pesticides. The important parameters influencing the whole extraction process including, organic solvent percent, salt addition, dilution factor, stirring rate and extraction time were optimized. The inter- and intra-day RSD% were found to be less than 15.4%. Limits of detection (LOD) and limits of quantification (LOQ) were below 60 and 180 μg kg⁻¹, respectively. The coefficient of determination was satisfactory (r² > 0.99) for all the studied analytes. The developed method was successfully applied to the monitoring of several samples gathered from local markets.     

A sensitive and validated LC-MS/MS method for high-throughput determination of pomalidomide in human plasma and pharmacokinetic studies

Pomalidomide is an immunomodulatory agent （IMiD） that has been approved by the US Food and Drug Administration （FDA） for clinical treatment of patients with multiple myeloma.In this work,we developed a sensitive and validated LC-MS/MS method for high-throughput determination of pomalidomide over the range of 1.006–100.6 ng/m L （R²=0.9991） in human plasma and pharmacokinetic studies.A liquid-liquid extraction method using ethyl acetate was applied to extract pomalidomide and afatinib （...     

A new ultrafast and high-throughput mass spectrometric approach for the therapeutic drug monitoring of the multi-targeted anti-folate pemetrexed in plasma from lung cancer patients

An analytical assay has been developed and validated for ultrafast and high-throughput mass spectrometric determination of pemetrexed concentrations in plasma using matrix assisted laser desorption/ionization–triple quadrupole–tandem mass spectrometry. Patient plasma samples spiked with the internal standard methotrexate were measured by multiple reaction monitoring. The detection limit was 0.4 fmol/μL, lower limit of quantification was 0.9 fmol/μL, and upper limit of quantification was 60 fmol/μL, respectively. Overall observed pemetrexed concentrations in patient samples ranged between 8.7 (1.4) and 142.7 (20.3)?pmol/μL (SD). The newly developed mass spectrometric assay is applicable for (routine) therapeutic drug monitoring of pemetrexed concentrations in plasma from non-small cell lung cancer patients.