Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.     

Chitosan adsorption on hydroxyapatite and its role in preventing acid erosion

Polymer adsorption onto an artificial saliva (AS) layer is investigated using quartz-crystal microbalance with dissipation (QCM-D) and chitosan as the model polymer. QCM-D is utilized in an innovative manner to monitor in situ adsorption of chitosan (CH) onto a hydroxyapatite (HA) coated crystal and to examine the ability of the adsorbed layer to "protect" the HA upon sequential exposure to acidic solutions. After deposition of a thin AS layer (16nm), the total thickness on the HA substrate increases to 37nm upon exposure to CH at pH 5.5 for 10min. Correspondingly, the surface charge changes from negative (i.e., AS) to positive, consistent with the adsorption the polycationic CH onto or into the AS layer. Upon exposure to an oxidizing agent, the chitosan cross-links and collapses as noted by a decrease in thickness to 10nm and an increase in the shear modulus by an order of magnitude. Atomic force microscopy (AFM) is used to determine the surface morphology and RMS roughness of the coated and HA surfaces after citric acid challenges. Both physisorbed and cross-linked chitosan are demonstrated to limit and prevent the erosion of HA, respectively.     

Adsorption-induced fibronectin aggregation and fibrillogenesis

Fibronectin (Fn), a high molecular weight glycoprotein, is a central element of extracellular matrix architecture that is involved in several fundamental cell processes. In the context of bone biology, little is known about the influence of the mineral surface on fibronectin supramolecular assembly. We investigate fibronectin morphological properties induced by its adsorption onto a model mineral matrix of hydroxyapatite (HA). Fibronectin adsorption onto HA spontaneously induces its aggregation and fibrillation. In some cases, fibronectin fibrils are even found connected into a dense network that is close to the matrix synthesized by cultured cells. Fibronectin adsorption-induced self-assembly is a time-dependant process that is sensitive to bulk concentration. The N-terminal domain of the protein, known to be implicated in its self-association, does not significantly inhibit the protein self-assembly while increasing ionic strength in the bulk alters both aggregation and fibrillation. The addition of a non-ionic surfactant during adsorption tends to promote aggregation with respect to fibrillation. Ultimately, fibronectin fibrils appear to be partially structured like amyloid fibrils as shown by thioflavine T staining. Taken together, our results suggest that there might be more than one single organization route involved in fibronectin self-assembly onto hydroxyapatite. The underlying mechanisms are discussed with respect to Fn conformation, Fn/surface and Fn/Fn interactions, and a model of fibronectin fibrillogenesis onto hydroxyapatite is proposed.     

Fibronectin adsorption on gold, Ti-, and Ta-oxide investigated by QCM-D and RSA modelling

The adsorption of fibronectin on gold, Ti-, and Ta-oxide surfaces is investigated by means of the quartz crystal microbalance with dissipation (QCM-D) technique. The surface chemistry (gold, Ti-, and Ta-oxide) is found to influence the frequency shift observed during adsorption of the fibronectin layer with the magnitude being Delta f Au>Delta f Ti-oxide approximately Delta f Ta-oxide. Corresponding variations in the dissipation change normalised to frequency change (Delta D/Delta f) for the layer are observed. The QCM-D data are further analyzed by the random sequential adsorption (RSA) model, and adsorption rate parameter ka and footprint (a) determined, which supported the trend seen in the Delta f and Delta D/Delta f values. The value of ka found by the RSA modelling of the QCM-D resonance frequency data is found to match the ratio between the mass measured by QCM-D and the mass reported by optical techniques in literature. We conclude that comparison of the adsorption rate parameter (ka) obtained by RSA modelling of the QCM-D data with ka values obtained from RSA modelling of data obtained using optical techniques can be a route to determine the degree of hydration of the adsorbed protein layer.     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.     

Fibronectin adsorption on tantalum: the influence of nanoroughness

The complex mechanisms of protein adsorption at the solid-liquid interface is of great importance in many research areas, including protein purification, biocompatibility of medical implants, biosensing, and biofouling. The protein adsorption process depends crucially on both the nanoscale chemistry and topography of the interface. Here, we investigate the adsorption of the cell-binding protein fibronectin on flat and nanometer scale rough tantalum oxide surfaces using ellipsometry and quartz crystal microbalance with dissipation (QCM-D). On the flat tantalum oxide surfaces, the interfacial protein spreading causes an increase in the rigidity and a decrease in the thickness of the adsorbed fibronectin layer with decreasing bulk protein concentration. For the tantalum oxide surfaces with well-controlled, stochastic nanometer scale roughness, similar concentration effects are observed for the rigidity of the fibronectin layer and saturated fibronectin uptake. However, we find that the nanorough tantalum oxide surfaces promote additional protein conformational changes, an effect especially apparent from the QCM-D signals, interpreted as an additional stiffening of the formed fibronectin layers.     

DOPA-IGF-1 Coated HA/PLGA Microspheres Promoting Proliferation and Osteoclastic Differentiation of Rabbit Bone Mesenchymal Stem Cells

To explore the ability of dihydroxyphenylalanine-insulin-like growth factor-1 (DOPA-IGF-1) coated hydroxyapatite/poly(lactic-co-glycolic acid)(HA/PLGA) microspheres to promote the proliferation and osteoclastic differentiation of rabbit bone mesenchymal stem cells(rBMSCs), HA/PLGA microspheres with different HA content (10%, 30%, 50%, mass fraction) were prepared by electrospinning method and HA/PLGA microspheres with 50% HA were coated with IGF-1 and DOPA-IGF-1, respectively. They were co-cultured with rBMSCs, respctively. Cell counting kit-8(CCK-8) detection, confocal laser scanning microscopy(CLSM), alkaline phosphatase(ALP) detection and osteogenesis related genes COL IA1, Runx2 and bone morphogenetic protein-2(BMP-2) detection were conducted to detect the proliferation activity, cell morphology, differentiation ability and the expression level of osteogenesis-related genes of cells cultured on all microspheres groups. The results showed that rBMSCs proliferation increased in an HA content dependent manner, and cells proliferated more in the IGF-1 coated and DOPA-IGF-1 coated groups, in particular in DOPA-IGF-1 coated group, and the differences were more remarkable over time (P<0.05). HA/PLGA microspheres promoted the proliferation and osteogenic differentiation of rBMSCs, and DOPA-IGF-1 coating enhanced the proliferation and osteogenic differentiation of rBMSCs.     

Quartz crystal microbalance with dissipation monitoring and surface plasmon resonance studies of carboxymethyl cellulose adsorption onto regenerated cellulose surfaces

Adsorption of anionic polyelectrolytes, sodium salts of carboxymethyl celluloses (CMCs) with different degrees of substitution (DS = 0.9 and 1.2), from aqueous electrolyte solutions onto regenerated cellulose surfaces was studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) experiments. The influence of both calcium chloride (CaCl(2)) and sodium chloride (NaCl) on CMC adsorption was examined. The QCM-D results demonstrated that CaCl(2) (divalent cation) caused significantly greater CMC adsorption onto regenerated cellulose surfaces than NaCl (monovalent cation) at the same ionic strength. The CMC layers adsorbed onto regenerated cellulose surfaces from CaCl(2) solutions exhibited greater stability upon exposure to flowing water than layers adsorbed from NaCl solutions. Both QCM-D and SPR results showed that CMC adsorption onto regenerated cellulose surfaces from CaCl(2) solutions increased with increasing CaCl(2) concentration up to the solubility limit (10 mM). Voigt-based viscoelastic modeling of the QCM-D data indicated that the CMC layers adsorbed onto regenerated cellulose surfaces had shear viscosities of η(f) ≈ 10(-3) N·s·m(-2) and elastic shear moduli of μ(f) ≈ 10(5) N·m(-2). Furthermore, the combination of SPR spectroscopy and QCM-D showed that the CMC layers contained 90-95% water. Adsorption isotherms for CMCs in CaCl(2) solutions were also obtained from QCM-D and were fit by Freundlich isotherms. This study demonstrated that CMC adsorption from CaCl(2) solutions is useful for the modification of cellulose surfaces.     

蛋白质在羟基磷灰石界面吸附的研究

考察了酪蛋白酸钠(sodium caseinate,SC)和乳清分离蛋白(whey protein isolate,WPI)在表面性质不同的3种羟基磷灰石(hydroxyapatite,HA)颗粒上的界面吸附,分析了蛋白质的分子构型和HA颗粒的表面性质等因素对蛋白质在HA界面吸附的影响,重点讨论了SC和WPI肽链上磷酸化丝氨酸基团(phosphorylated serine residues,Ser-P)的数量和分布对吸附差异的影响.通过傅里叶变换红外光谱和表面电位分析发现SC和WPI无法被比表面积较小的HA颗粒有效吸附,但是在有效吸附面积较高的球状纳米HA和棒状微米HA上能够被吸附.Ser-P的存在使得SC在HA界面的吸附量更高、吸附能力更强.Ser-P数量和分布的不同则导致了SC中不同的蛋白组分在HA界面的竞争性吸附:β-酪蛋白在2μmHA界面始终存在优先吸附性;当纳米HA的浓度低于15 mg/mL时,纳米HA界面会优先吸附αs-酪蛋白.     

Viscoelastic modeling of highly hydrated laminin layers at homogeneous and nanostructured surfaces: quantification of protein layer properties using QCM-D and SPR

The adsorption of proteins at material surfaces is important in applications such as biomaterials, drug delivery, and diagnostics. The interaction of cells with artificial surfaces is mediated through adsorbed proteins, where the type of protein, amount, orientation, and conformation are of consequence for the cell response. Laminin, an important cell adhesive protein that is central in developmental biology, is studied by a combination of quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance (SPR) to characterize the adsorption of laminin on surfaces of different surface chemistries. The combination of these two techniques allows for the determination of the thickness and effective density of the protein layer as well as the adsorbed mass and viscoelastic properties. We also evaluate the capacity of QCM-D to be used as a quantitative technique on a nanostructured surface, where protein is adsorbed specifically in a nanopattern exploiting PLL-g-PEG as a protein-resistant background. We show that laminin forms a highly hydrated protein layer with different characteristics depending on the underlying substrate. Using a combination of QCM-D and atomic force microscopy (AFM) data from nanostructured surfaces, we model laminin and antibody binding to nanometer-scale patches. A higher amount of laminin was found to adsorb in a thicker layer of a lower effective density in nanopatches compared to equivalent homogeneous surfaces. These results suggest that modeling of QCM-D data of soft viscoelastic layers arranged in nanopatterns may be applied where an independent measure of the "dry" mass is known.     

Fibronectin adsorption on titanium surfaces and its effect on osteoblast precursor cell attachment

The objective of this study was to investigate the adsorption of fibronectin on titanium (Ti) surfaces and the effect of pre-adsorbed fibronectin on osteoblast precursor cell attachment in vitro. Two different concentrations of bovine fibronectin were used in this study. Protein adsorption on Ti surfaces was analyzed using the micro bicinchoninic acid (BCA) protein assay. Cell concentration on Ti and fibronectin pre-adsorbed Ti surfaces after 3 h incubation was analyzed using the Vybrant™ cell adhesion assay. Cell morphology on Ti and fibronectin pre-adsorbed Ti surfaces was observed using scanning electron microscopy (SEM). After 180 min incubation, maximum adsorption of bovine fibronectin on Ti surfaces was observed. Fibronectin adsorption on Ti surfaces was observed to be significantly dependent on the initial concentration and the amount of incubation time. In the presence of 1 mg/ml fibronectin pre-adsorbed on Ti surfaces after 15 min, osteoblast precursor cell attachment on Ti surfaces was observed to be enhanced compared with control Ti surfaces, Ti surfaces pre-adsorbed with 1 mg/ml fibronectin for 180 min, and Ti surfaces pre-adsorbed with 0.1 mg/ml fibronectin for 15 and 180 min. No significant difference in cell attachment was observed between control Ti surfaces, Ti surfaces pre-adsorbed with fibronectin for 180 min, and Ti surfaces pre-adsorbed with 0.1 mg/ml fibronectin for 15 and 180 min. In addition, no differences in cell morphology of the attached osteoblast precursor cells on control Ti surfaces and Ti surfaces pre-adsorbed with fibronectin were observed in this study. It was concluded that an optimum concentration of adsorbed fibronectin on Ti surfaces plays an important role in governing cell attachment.     

Adsorption of bacteria and polycations on model surfaces of cellulose, hemicellulose and wood extractives studied by QCM-D

Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) were used as the tools to study the adsorption of bacteria onto surfaces of silica and polystyrene coated with materials related to papermaking. Cationic polyelectrolytes used as fixatives and retention aids in paper industry were found to promote irreversible adsorption of the ubiquitous white water bacterium, Pseudoxanthomonas taiwanensis, onto model surfaces of cellulose (pH 8). The high charged low molecular weight polyelectrolyte, poly(diallyldimethyl) ammonium chloride (pDADMAC) adsorbed to silica surface as a flat and rigid layer, whereas the low charged cationic polyacryl amide (C-PAM) of high molecular weight adsorbed as a thick and loose layer. AFM images showed that the polyelectrolytes accumulated as layers around each bacterial cell. In the presence of wood hemicellulose (O-acetyl-galactoglucomannan) the bacteria adsorbed massively, as large, tightly packed rafts (up to 0.05mm in size) onto the polystyrene crystal surface coated with wood extractives (pH 4.7). AFM and FESEM micrographs also showed large naked areas (with no bacteria) in between the bacterial rafts on the crystal surface. In this case, QCM-D only incompletely responded to the massiveness of the bacterial adsorption. The results indicate that cationic polymers can be used to increase the retention of bacteria from the process water onto the fibre web and that, depending on the balance between hemicelluloses and wood extractives and pH of the process waters, bacteria can be drawn from process waters onto surfaces.     

Hydroxyapatite grown on a native extracellular matrix: initial interactions with human fibroblasts

Proteins are known to modulate the physical properties of minerals, and thus we anticipate that they will strongly influence the structure and the biological properties of biomimetically prepared carbonate-containing hydroxyapatite. This study was designed to learn more about the main morphological characteristics of hydroxyapatite layer grown on different substrates coated with an extracellular matrix, a biological matrix that was produced by cultured osteoblast-like cells. The hydroxyapatite growth was carried out in a simulated body fluid, a solution that resembles the human blood plasma. It was found that the extracellular matrix may serve as a template for the mineralization of biomimetic hydroxyapatite on the surface of materials like stainless steel, silicon, and silica glass, leading to the formation of a homogeneous layer. The latter was consisting of nanometer-sized hydroxyapatite crystals grouped in particles with regular sphere shape and with a significantly higher average diameter in comparison to samples without extracellular matrix coating. Subsequent in vitro studies with living fibroblasts showed that the cellular behavior depended on the type of underlying substrate used for the hydroxyapatite growth, as well as on the immersion time of the samples in the simulated body fluid. Increasing the thickness of the hydroxyapatite layer altered visibly the cellular response, and the fibroblasts developed stellate morphology on the samples with a hydroxyapatite-extracellular matrix coating. Preadsorption with fibronectin significantly improved the initial cell adhesion and spreading to all surfaces. Thus, such an approach may contribute to the development of surfaces with better tissue compatibility.     

QCM-D analysis of the performance of blocking agents on gold and polystyrene surfaces

With today's developments of biosensors and medical implants comes the need for efficient reduction of nonspecific binding. We report on a comparison of the ability of traditionally used blocking agents and poly(ethylene glycol) (PEG) derivatives to prevent protein adsorption on both gold and polystyrene surfaces. The adsorption kinetics of blocking molecules and proteins was monitored gravimetrically using quartz crystal microbalance with dissipation (QCM-D). The resistance to nonspecific adsorption was evaluated on gold and polystyrene surfaces coated with bovine serum albumin (BSA) or casein, gold coated with three different 6-11 ethylene glycol (EG) long hydroxyl- or methoxy-terminated PEG-thiolates and polystyrene blocked with a PLL-g-PEG or three different 12 EG long benzyl-PEG-derivatives. The prevention of protein adsorption on the coated surfaces was evaluated by monitoring the mass uptake at the addition of both pure prostate specific antigen (PSA) and seminal plasma. We demonstrate that on pure gold the PEG-thiols are superior to the other blocking molecules tested, with the end group and length of the PEG-thiols used being of minor importance. On polystyrene surfaces blocking with PLL-g-PEG, BSA and casein gave the best results. These results have an impact on further development of an optimized immunoassay protocol.     

Adsorption behavior of plasmid DNA on binary self-assembled monolayers modified gold substrates

Gold is known to have good biocompatibility because of its inert activity and the surface property can be easily tailored with self-assembled monolayers (SAMs). In previous works, gold surfaces were tailored with homogeneously mixed amine and carboxylic acid functional groups to generate surfaces with a series of isoelectronic points (IEPs). In other words, by tailoring the chemical composition in binary SAMs, different surface potentials can be obtained under controlled pH environments. To understand how the surface potentials affect the interaction at the interface, a binary-SAMs-modified Au electrode on a quartz crystal microbalance with dissipation detection (QCM-D) was used owing to the high weight sensitivity of QCM-D. In QCM-D, the frequency shift and the energy dissipation are monitored simultaneously to determine the adsorption behaviors of the plasmid DNA to surfaces of various potentials in Tris-buffered NaCl solutions of different pH. The results revealed that the plasmid DNA can be adsorbed on the SAM-modified surfaces electrostatically; thus, in general, the amount of adsorbed plasmid DNA decreased with increasing environmental pH and the decreasing ratio of the amine functional groups on the surfaces owing to weaker positive potentials on the surface. For the high amine-containing surfaces, due to the strong electrostatic attraction, denser films were observed, and thus, the apparent thickness decreased slightly. The negatively charged carboxylic acid surfaces can still adsorb the negatively charged plasmid DNA at some conditions. In other words, the electrostatic model cannot explain the adsorption behavior completely, and the induced dipole (Debye) interaction between the charged and polarizable molecules needs to be considered as well.     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

羟基磷灰石与牛血清白蛋白相互作用的原位红外光谱研究

应用原位(in situ)全反射红外光谱研究牛血清白蛋白在电化学法制备的羟基磷灰石表面的吸附和成键行为, 探索电化学法制备的HA生物材料/生物环境界面过程和生物相容性的微观本质.     

血清蛋白质对选择性剥离鼠成纤细胞的影响

探讨血清对细胞剥离的影响．将温度应答性高分子聚（ Ｎ 异丙基丙烯酰胺／ 丙烯酸）的叠氮苯胺的衍生物（ＡｚＰｈＰＩＡ） 条纹状地光固定在组织培养聚苯乙烯（ＰＳｔ） 基板上，并对鼠成纤维细胞（ＳＴＯ） 血清培养２ｈ ．温度低于最低临界温度（ＬＣＳＴ） ，粘附在ＡｚＰｈＰＩＡ ＰＳｔ 上的细胞不能很好地剥离．选用血清中两种典型蛋白质 白蛋白和纤维粘连蛋白，模拟血清进行细胞粘附和剥离实验．结果表明，纤维粘连蛋白在基板上全面而均匀地附着，从而加强了细胞与基板表面的粘附性，使细胞在低温时不易剥离；白蛋白在基板上的附着是条纹状的，ＡｚＰｈＰＩＡ ＰＳｔ 表面附着白蛋白少，这说明是由于温度应答性高分子表面亲水性提高，高分子链伸展而不是白蛋白的阻害作用引起细胞的脱落．另外，表面分析结果表明，蛋白质的吸收并不影响ＡｚＰｈＰＩＡ ＰＳｔ 材料表面的可湿性．     

Chemical modifications of Au/SiO2 template substrates for patterned biofunctional surfaces

The aim of this work was to create patterned surfaces for localized and specific biochemical recognition. For this purpose, we have developed a protocol for orthogonal and material-selective surface modifications of microfabricated patterned surfaces composed of SiO(2) areas (100 μm diameter) surrounded by Au. The SiO(2) spots were chemically modified by a sequence of reactions (silanization using an amine-terminated silane (APTES), followed by amine coupling of a biotin analogue and biospecific recognition) to achieve efficient immobilization of streptavidin in a functional form. The surrounding Au was rendered inert to protein adsorption by modification by HS(CH(2))(10)CONH(CH(2))(2)(OCH(2)CH(2))(7)OH (thiol-OEG). The surface modification protocol was developed by testing separately homogeneous SiO(2) and Au surfaces, to obtain the two following results: (i) SiO(2) surfaces which allowed the grafting of streptavidin, and subsequent immobilization of biotinylated antibodies, and (ii) Au surfaces showing almost no affinity for the same streptavidin and antibody solutions. The surface interactions were monitored by quartz crystal microbalance with dissipation monitoring (QCM-D), and chemical analyses were performed by polarization modulation-reflexion absorption infrared spectroscopy (PM-RAIRS) and X-ray photoelectron spectroscopy (XPS) to assess the validity of the initial orthogonal assembly of APTES and thiol-OEG. Eventually, microscopy imaging of the modified Au/SiO(2) patterned substrates validated the specific binding of streptavidin on the SiO(2)/APTES areas, as well as the subsequent binding of biotinylated anti-rIgG and further detection of fluorescent rIgG on the functionalized SiO(2) areas. These results demonstrate a successful protocol for the preparation of patterned biofunctional surfaces, based on microfabricated Au/SiO(2) templates and supported by careful surface analysis. The strong immobilization of the biomolecules resulting from the described protocol is advantageous in particular for micropatterned substrates for cell-surface interactions.