在NaGdF4：Tm3+, Dy3+中Gd3+间的能量迁移及Gd3+-Dy3+能量传递量子效率

基于量子剪裁基本原理,通过光谱技术研究NaGdF₄:Tm³⁺,Dy³⁺在一个真空紫外光子激发下获得两个蓝色光子的可能性。在这种化合物中,量子剪裁通过下转换,即通过应用不同镧系离子间的能量传递进行。通过对Tm 4f¹²-4f¹¹5d激发,部分能量从Tm³⁺离子5d态直接传递给Gd³⁺,然后在Gd³⁺-Tm³⁺之间发生交叉弛豫,剩余能量从Gd³⁺传递给Dy³⁺,产生两个可见光子发射,一个来自Tm³⁺的¹G₄-³H₆跃迁,另一个来自Dy³⁺的⁴F_9/2-⁶H_15/2跃迁。主要研究获得以NaGdF₄:Tm³⁺,Dy³⁺为基础的新型具有更高效率,更高稳定性和更强真空紫外(VUV)吸收量子剪裁发光粉的可能性。各种光谱技术,如光致发光、激发和衰减等被用来表征不同Dy³⁺浓度掺杂NaGdF₄中Gd³⁺晶格间能量迁移引起的施主Gd³⁺和受主Dy³⁺之间的能量传递。结果表明Gd³⁺离子之间存在能量迁移,随之交换相互作用引起施主与受主(Gd³⁺-Dy³⁺)之间的能量传递。通过Bursh-tein等人关于激发态的弛豫理论,施主-受主能量传递参数k_DS可以从Gd³⁺的⁶P_7/2发射的衰减计算出。Gd³⁺-Dy³⁺能量传递量子效率也可以得到。NaGdF₄:Tm³⁺和NaGdF₄:Tm³⁺,Dy³⁺是由水热法制备的,NaGdF₄:Dy³⁺是由文献[4]方法制备的。发射光谱和激发光谱通过自制的VUV光谱仪和F-4500测量。衰减曲线由OPO激光器激发获得Gd³⁺-Dy³⁺之间能量传递量子效率在受主浓度大约在N_A=0.6%时达到最佳值,并且明显地观测到浓度猝灭效应。     

Excitation mechanisms and effects of dopant concentration in Gd2O2S:Tb phosphor

Gadolinium oxysulfide powders doped with different Tb³⁺ concentrations were prepared from sulfur vaporization on rare earths’ basic carbonate precursors. Single-phase Gd₂O₂S samples were obtained, with Tb³⁺ doping up to 9 at%. The study of the excitation mechanisms revealed that the Tb³⁺ emission might occur after the direct Tb³⁺ excitation either by energy transfer from Gd³⁺ or from the phosphor host. The characteristic terbium emission lines were observed, resulting from the radiative decay from ⁵D₃ or ⁵D₄ to ⁷F_j levels. The cross-relaxation phenomenon was observed and its effects on the materials emission color were discussed based on the CIE diagram. By using time-resolved spectroscopy, ⁵D₃→⁷F_J and ⁵D₄→⁷F_J transitions were separated.     

用于GaAs太阳能电池的NaYF4中Tb3+-Er3+耦合对的光谱转换

观测到一种以Tb³⁺-Er³⁺进行光谱转换的量子剪裁现象。一个高能紫外光子(Tb³⁺的⁷F₆→⁵L₁)被量子剪裁成两个低能光子:一个是近红外光子(Er³⁺的⁴I_9/2→⁴I_15/2),另一个是蓝色光子(Tb³⁺的⁵D₄→⁷F₆),它们两个 都可以被GaAs太阳能电池有效地吸收。量子剪裁效率高达188%,接近理论极限的200%。从Tb³⁺(⁵L₁→ ⁵D₄) 到Er³⁺(⁴I_15/2→⁴I_9/2)的能量传递的能量失配是237 cm^-1,比NaYF₄中的声子能400 cm^-1小,能量传递是近共振的。Tb³⁺施主间的能量迁移可以近似地用扩散模型处理, 从Tb³⁺-Er³⁺对之间能量传递的初始过程发现,偶极-偶极相互作用占主导地位。     

用同步辐射研究掺Tb3+氟化物K2GdF5的光谱和Gd3+-Tb3+能量传递

对比了不同激发波长下水热法合成的K2GdF5:Tb3+(摩尔分数0.5％)单晶材料的光致发光谱线;监测了5 D3→7F6和5 D4→7 F5的激发谱,给出了几组窄带吸收和3个宽带吸收;分析表明窄带发射为Gd3+的8 S7/2→6FJ、8S7/2→6GJ、8S7/2→6DJ、8S7/2→6IJ的跃迁,宽带发射为Gd3+的...     

Radiative and non radiative spectroscopic properties of Er ion in tellurite glass

We have investigated in detail the mechanism of infrared emission and upconversion emission of Er³⁺ in tellurite glass as a function of the dopant concentration. Both the infrared and upconversion emissions are competing processes and the efficiency of infrared emission at 1534 nm is 100% at the lowest Er content (0.5 mol%) and reduces to 50% at higher dopant concentration (>2 mol%). The green upconversion emission at 548 nm is mainly due to the excited state absorption (ESA) from ⁴I_11/2, which populate the ⁴F_7/2 level. In addition to this, the possible energy transfer (ET) through Er³⁺(⁴I_11/2) + Er³⁺(⁴I_11/2) → Er³⁺(⁴F_7/2) + Er³⁺(⁴I_15/2) can also results in the green emission as is noticed from the concentration dependent efficiency change of the green emission. The fluorescence quenching of green emission with Er concentration may be related with the cross relaxation (CR) process ²H_11/2 + ⁴I_15/2 → ⁴I_9/2 + ⁴I_13/2. The red emission is due to the combined effect of the ESA from level ⁴I_13/2 to ⁴F_9/2, the energy transfer process described by Er³⁺(⁴I_13/2) + Er³⁺(⁴I_11/2) → Er³⁺(⁴F_9/2) + Er³⁺(⁴I_15/2) and the cross relaxation process.     

Experimental optimum design and luminescence properties of NaY(Gd)(MoO_4)_2:Er~(3+)phosphors

Three-factor orthogonal design(OD) of Er~(3+)/Gd~(3+)/T(calcination temperature) is used to optimize the luminescent intensity of Na Y(Gd)(MoO_4)_2:Er~(3+)phosphor.Firstly,the uniform design(UD) is introduced to explore the doping concentration range of Er~(3+)/Gd~(3+).Then OD and range analysis are performed based on the results of UD to obtain the primary and secondary sequence and the best combination of Er~(3+),Gd~(3+),and T within the experimental range.The optimum sample is prepared by the high temperature solid state method.Photoluminescence excitation and emission spectra of the optimum sample are detected.The intense green emissions(530 nm and 550 nm) are observed which originate from Er~(3+)~2H_(11/2)→~4I_(15/2)and~4S_(3/2)→~4I_(15/2),respectively.Thermal effect is investigated in the optimum NaY(Gd~(3+))(MoO_4)_2:Er~(3+)phosphors,and the green emission intensity decreases as temperature increases.     

Effect of WO3 on the spectroscopic properties in Er/Yb co-doped bismuth–borate glasses

The spectroscopic properties of Er³⁺/Yb³⁺ co-doped Bi₂O₃–B₂O₃–WO₃ (BBW) glasses were analyzed and discussed. The effect of WO₃ content on the absorption spectra, the Judd–Ofelt parameters Ω_t (t=2, 4, 6), emission spectra and the lifetime of the ⁴I_13/2 level and the quantum efficiency of Er³⁺:⁴I_13/2→⁴I_15/2 transition were also investigated. With the substitution of WO₃ for B₂O₃, the measured lifetime of the ⁴I_13/2 level and the quantum efficiency of Er³⁺:⁴I_13/2→⁴I_15/2 transition increase from 0.98 to 1.31 ms and from 38.2% to 49.2%, respectively. The effective width of emission band and the emission cross-section both decrease slightly. And the emission spectra is analyzed via the different curve (σ_e−σ_a) of BBW glasses, the influence of OH⁻is also discussed.     

不同波长激发下YLiF4：Er3+,Tm3+,Yb3+的发光

水热法合成了YLiF₄:Er³⁺,Tm³⁺,Yb³⁺,其中Er³⁺、Yb³⁺和Tm³⁺的摩尔分数分别为1%、1.5%和2%。当用355nm光激发时,其发光为蓝色,峰值位于450nm,对应于Tm³⁺的¹D₂→³F₄跃迁。用378nm激发时,发光为绿色,主要发光峰位于552nm。980nm光激发时,发光为白色,发光峰分别位于665(651),552(543),484,450nm处,并在648nm处还观察到了一个发光峰,其中最强的发射为红光。YLiF₄:Er³⁺,Tm³⁺,Yb³⁺的蓝光来源于Tm³⁺的激发态¹G₄到基态³H₆的跃迁,绿光来源于Er³⁺的⁴S_3/2和²H_11/2到基态⁴I_15/2的跃迁,红光既来源于Tm³⁺的¹G₄→³F₄的跃迁,也来源于Er³⁺的⁴F_9/2→⁴I_15/2的跃迁。在上转换发光中,还探测到了紫外光359nm的发射。监测665nm得到的激发光谱不同于监测552nm的激发光谱,在665nm的激发光谱中出现了对应Tm³⁺的¹G₄能级的峰。在双对数曲线中,蓝光484nm、绿光552nm和红光665nm的斜率分别为2.25、2.28和2.21,紫外光359nm的斜率为2.85。因此在980nm激发下,蓝光484nm、绿光552nm和红光665nm都是双光子过程,紫外光359nm的发射是三光子过程。     

Ba5SiO4Cl6: Yb3+, Er3+, Li+荧光粉的制备及上转换发光性质研究

本文采用高温固相反应法制备了Ba₅SiO₄Cl₆: Yb³⁺, Er³⁺, Li⁺ 荧光粉, 并对其上转换发光性质及其发光机理进行了研究. 在980 nm 激光的激发下, Ba₅SiO₄Cl₆: Yb³⁺, Er³⁺ 荧光粉呈现较强的红色(662 nm) 和较弱的绿色(550 nm) 的上转换发光, 红色和绿色的上转换发光分别对应于Er³⁺ 离子的⁴S_3/2/²H_11/2→⁴I_15/2 和⁴F_9/2→⁴I_15/2 跃迁, 且随着掺杂的Er³⁺ 和Yb³⁺ 离子浓度增加, 样品的上转换发光强度增加, 这是因为Yb³⁺ 离子和Er³⁺ 离子之间的能量传递效率增加引起的. 在0.5—0.8 W 功率激发下,样品属于双光子发射, 而在0.9—1.2 W 功率激发下样品具有新的上转换发光机理——光子雪崩效应. 探讨了Li⁺ 掺杂对Ba₅SiO₄Cl₆: Yb³⁺, Er³⁺ 样品的上转换发光性质的影响, Li⁺ 离子的掺杂引起Ba₅SiO₄Cl₆:Yb³⁺, Er³⁺ 上转换发光强度增加, 这是由于Li⁺ 离子的掺入降低了晶体场的对称性引起的.     

Green and red up-conversion emissions of Er–Yb Co-doped TiO2 nanocrystals prepared by sol–gel method

In this paper, green and red up-conversion emissions of Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals were reported. The phase structure, particle size and optical properties of Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals samples were characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis–NIR absorption spectra and photoluminescence (PL) spectra. Green and red up-conversion emissions in the range of 520–570 nm (²H_11/2, ⁴S_3/2→⁴I_15/2) and 640–690 nm (⁴F_9/2→⁴I_15/2) were observed for the Er³⁺–Yb³⁺ co-doped TiO₂ nanocrystals. The visible up-conversion mechanism and temperature dependence of up-conversion emission for Er³⁺ in TiO₂ nanocrystals were discussed in detail.     

Li+和Er3+掺杂对Ba2SiO4：Eu2+发光性能的影响

采用化学沉淀法一次煅烧工艺制备了Ba_1.99-x/2-2ySiO₄:Eu_0.01²⁺, Li_x+y²⁺, Eu_y³⁺绿色荧光粉, 用X射线衍射仪和荧光分光光度计对样品的晶体结构、发光性能进行表征. 结果表明: 少量Eu²⁺, Li⁺和Er³⁺的共掺杂没有改变晶体结构; 其激发光谱分布在270–440 nm波长范围, 谱峰位于288 nm, 360 nm处, 可以被InGaN 管芯产生的360–410 nm辐射有效激发; 在360 nm近紫外光激发下, 测得其发射光谱峰值在500 nm 处, 是Eu²⁺4f⁶5d¹→4f⁷跃迁的典型发射; 荧光粉发光强度随着Li⁺掺杂量的增大先增强, 后减弱, 当x=0.1时, 发光强度最大; 随着Li⁺, Er³⁺共掺杂量的增加(y=0.012), 出现位于530 nm和488 nm的发射峰, 对应于Er³⁺的²H_11/2→⁴I_15/2和⁴F_7/2→⁴I_15/2特征发射, 同时分析了Eu²⁺→Er³⁺的能量传递过程. 关键词： 化学沉淀法 2SiO₄：Eu²⁺,Li⁺,Er³⁺')" href="#">Ba₂SiO₄：Eu²⁺,Li⁺,Er³⁺ 能量传递 发光性能     

Er3+,Yb3+共掺杂SrTiO3超细粉末的可见上转换发光

钛酸锶(SrTiO₃)具有高介电常数、良好的绝缘性质、优良的物理化学稳定性和在可见光范围内的优异的透明度等优点,是一种重要的无机功能材料。近年来,Al³⁺,Ga³⁺等离子共掺杂的SrTiO₃:Pr³⁺做为一种优异的红色场发射显示(FED)荧光粉引起了人们的兴趣。另外,SrTiO₃具有相对较小的声子频率,因而它可以作为一种有利于上转换发光的基质材料。以NaCl为助熔剂制备了Er³⁺,Yb³⁺共掺杂的SrTiO₃超细粉末。在980nm激发下,样品发出很强的来自于Er³⁺离子的²H_11/2→⁴I_15/2,⁴S_3/2→⁴I_15/2(绿光)和⁴F_9/2→⁴I_15/2(红光)跃迁的上转换发光。Yb³⁺离子的共掺杂对Er³⁺离子的上转换发光起明显的增强作用。研究了上转换发光强度与稀土离子浓度以及激发光强度之间的依赖关系,表明在Er³⁺单掺杂和Er³⁺,Yb³⁺共掺杂的样品中,绿光和红光都是被双光子激发过程激发的。还对上转换发光的机理做了初步分析。     

Optical properties and local structure of Eu-doped synthetic analogue of the microporous titanosilicate mineral sitinakite

The synthetic analogue of the microporous titanosilicate mineral sitinakite has been hydrothermally synthesized and used as a host in the preparation of a new photoluminescent material. The inclusion of Eu³⁺ in the pores of the sitinakite doubles the unit cell volume and changes the symmetry of the initial sodium phase. The Eu³⁺-doped material displays a stable room temperature emission ascribed to the Eu³⁺ intra-4f^{6 5}D₀→⁷F₀₋₄ transitions, with a maximum external quantum yield of 6%. The observation of two components for the non-degenerated ⁵D₀→⁷F₀ transition, the local field splitting of the ⁵D₀→⁷F₁₋₂ transitions, and the ⁵D₀ emission decay curves point out the presence of two optically active Eu³⁺ sites. Possible structural distribution of the detected Eu³⁺ cations is discussed.     

水溶性β-NaY(Gd)F4:Yb3+/Er3+纳米棒的水热合成及生物偶联

以聚乙烯亚胺(PEI)为表面活性剂,采用水热合成法,制得了表面氨基修饰的水溶性β-NaY(Gd)F₄:Yb³⁺/Er³⁺纳米棒,并对β-NaY(Gd)F₄:Yb³⁺/Er³⁺上转换纳米棒的制备方法、条件等进行了考察.结果表明,当Gd³⁺的引入摩尔分数为40%时,200 ℃下反应8 h即可获得纯β-NaY(Gd)F₄:Yb³⁺/Er³⁺纳米棒.利用X射线粉末衍射仪(XRD)、扫描电子显微镜 (SEM)、透射电子显微镜(TEM)、荧光光谱(PL)对样品的结构、形貌及光谱特性进行了表征.结构和形貌分析结果表明,制得的样品为单相β-NaY(Gd)F₄:Yb³⁺/Er³⁺纳米棒,纳米棒的截面粒径约为40 nm,平均长度约为210 nm.在980 nm波长激发下,样品的上转换发光光谱中出现了4个发射中心位于407,529,546,660 nm的发射带,分别对应于Er³⁺离子的²H_9/2→⁴I_15/2、²H_11/2→⁴I_15/2、⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁.采用戊二醛法,使β-NaY(Gd)F₄:Yb³⁺/Er³⁺上转换纳米棒表面的氨基与牛血清蛋白(BSA)分子中的氨基成功偶连在一起.利用紫外光谱分析(UV)和考马斯亮蓝法,对二者的偶联进行了证明.     

杯[8]芳烃-硝酸稀土配合物的红外光谱及荧光性能

合成了以对叔丁基杯[8]芳烃(LH₈)、硝酸根及DMF为配体,单一稀土RE³⁺(Sm³⁺、Eu³⁺、Tb³⁺、Dy³⁺)及混合稀土Tb³⁺:Ln³⁺(Ln=La³⁺,Gd³⁺,Y³⁺)为中心的7种稀土配合物,对其进行了元素分析、摩尔电导、热谱、红外光谱及荧光性能研究.荧光光谱的测试表明所有Tb³⁺及其共掺杂配合物具有较强的特征荧光发射,荧光惰性离子La³⁺、Gd³⁺、Y³⁺对Tb³⁺的荧光有增强作用,其中Y³⁺的荧光增强作用最大,Gd³⁺次之,La³⁺最小.     

Luminescent properties of Ce in MSO4 (M: Ca, Sr and Ba) and the effect of Na co-doping

The optical properties of Ce³⁺ in CaSO₄, SrSO₄ and BaSO₄ are reported. The Ce³⁺ ion shows 4f⁰5d¹→²F_5/2,²F_7/2 luminescence in all three sulphates. Co-doping with Na⁺ does not change the local surrounding of the Ce³⁺ ion, but enhances the amount of Ce³⁺ ions built in. Under optical excitation, besides the typical Ce³⁺ doublet emission in the ultraviolet spectral region, band emission around 445 nm was observed. This band emission was not assigned to emission from a Ce³⁺ centre, but to emission from an impurity-trapped exciton. Under X-ray excitation, both Ce³⁺ emission and an emission band around 380 nm was observed. This band was assigned to emission from a self-trapped exciton.     

BaMgF_4:Er~(3+),Yb~(3+)上转换纳米晶的合成及其发光性能研究

采用反向共沉淀法制备了形貌呈棒状的BaMgF4:Er3+,Yb3+上转换纳米晶.样品在980 nm半导体激光器激发下发射绿色和红色上转换荧光,其发射的绿、红发射带归因于Er3+离子的2H11/2—4I15/2,4S3/2—4I15/2和4F9/2—4I15/2跃迁.当Er3+的掺杂浓度为3%,Yb3+离子掺杂浓度为10%时,荧光粉的上转换发光强度最强;随着Yb3+离子浓度的增加样品的红光发射增强,绿光发射减弱.通过上转换发光强度与抽运电流关系曲线的拟合,得出BaMgF4:Er3+,Yb3+上转换材料的绿光与红光的上转换过程均为双光子吸收过程.     

纳米GdPO4：Eu3+的合成和光谱特性

采用EDTA二钠盐参加的共沉淀方法制备出纳米GdPO₄:Eu³⁺,利用X射线衍射,荧光光谱和电镜等测试手段对GdPO₄:Eu³⁺的相结构和发光性质进行了研究。XRD图谱结果表明700℃合成了纯的具有单斜晶系、独居石结构的纳米GdPO₄:Eu³⁺。根据Scherrer公式计算,700,800℃热处理后样品的一次颗粒度分别为18,40nm左右。激发光谱和发射光谱的研究表明,电荷迁移态和Eu³⁺的特征发射峰的强度随GdPO₄:Eu³⁺纳米粒子的增大而增强。在较小的纳米粒子中,存在结构扭曲的现象,315nm激发下的发射光谱研究表明,Gd³⁺和Eu³⁺具有较好的能量传递。     

Er~(3+)/Yb~(3+)共掺杂氧氟硼硅酸盐微晶玻璃绿色上转换发光的温度特性

采用高温熔融法和热处理工艺制备得到透明的Er3+/Yb3+共掺杂氧氟微晶玻璃。XRD结果证实析出的纳米晶相为Ba YF5。在980 nm激发下,观察到强的绿光发射,源于Er3+的2H11/2→4I15/2和4S3/2→4I15/2跃迁的上转换发光。根据荧光强度比(FIR)的方法研究了微晶玻璃上转换荧光的温度传感特性,其最大灵敏度在523 K时为0.003 4 K-1,表明Er3+/Yb3+共掺氧氟硼硅酸盐微晶玻璃上转换发光在高精度温度传感器方面具有一定的应用前景。     

Ln2Sn2O7：Er3+纳米晶的制备及发光性能研究

采用溶胶-凝胶法合成Ln₂Sn₂O₇:Er³⁺(Ln=La,Gd,Y)纳米晶。通过X射线衍射和场发射扫描电子显微镜测试了样品的晶体结构和形貌,同时对样品的上转换发光性能进行了测试。结果表明:在980 nm连续激发光的激发下,样品主要表现为绿光发射。发射中心在528,549 nm的绿光和672 nm处的红光发射分别对应Er³⁺离子的⁴S_3/2→⁴I_15/2、²H_11/2→⁴I_15/2和 ⁴F_9/2→⁴I_15/2跃迁。以La₂Sn₂O₇:Er³⁺纳米晶为例,Er³⁺离子的摩尔分数为7%、退火温度为1 150℃是其制备的最佳条件,此时其各个发射峰的强度最高。对La₂Sn₂O₇:Er³⁺的发光强度与激发功率关系的研究表明,其绿光和红光发射均为双光子过程。激发光吸收和能量转移是La₂Sn₂O₇:Er³⁺纳米晶上转换发光的主要机制。