甲基丙烯酸甲酯和二乙烯苯对苯乙烯共聚合的影响

以甲基丙烯酸甲酯(MMA)、苯乙烯(St)和二乙烯苯(DVB)三元共聚体系为研究对象,采用气相色谱法研究了体系中MMA和DVB浓度对聚苯乙烯型树脂交联的影响。结果表明:MMA加速St和DVB的聚合速率,其中对St的加速作用又明显大于对DVB的。随MMA含量的增加,聚苯乙烯型树脂交联不均匀的情况得以明显改善,而增加体系中DVB的含量,DVB与St、MMA反应速率的差异变大,树脂交联不均匀的情况变严重。     

An Experimental Study on the Free‐Radical Copolymerization Kinetics with Crosslinking of Styrene and Divinylbenzene in Supercritical Carbon Dioxide

A study on the effect of process conditions and composition of the reacting mixture on the kinetics and particle properties in the copolymerization of styrene and divinylbenzene in supercritical carbon dioxide is presented. Polystyrene‐block‐polydimethylsiloxane and Krytox 257 FSL (Dupont) were used as stabilizers, and their performance compared. A 38 mL, high‐pressure view cell, equipped with one frontal and two lateral sapphire windows, was used as the reacting vessel. The polymer product was characterized for total monomer conversion, gel content, molecular weight averages of the sol fraction and particle size distribution. Acceptable polymerization rates and partially‐agglomerated spherical particles were produced under the conditions tested.

     

Autoacceleration and Cyclization Effects on Styrene/Divinylbenzene Copolymerization

Copolymerizations of styrene with divinylbenzene (DVB) are carried out at low monomer concentrations in order to evaluate the incidence of cyclization reactions. The pendant double bond concentration in the synthesized polymers is measured using Fourier transform infrared spectroscopy. Reactions are carried out at monomer concentrations of 6% and 2% (v/v), DVB concentration in the range 15–80 wt% and temperatures in the range 60–90 °C. A previously developed model is used to interpret the results and analyze the cyclization effects. The predictions of the model accounting for cyclization reactions present a better agreement to the experimental data in comparison to predictions without cyclizations. Autoacceleration effects are observed for cases with higher DVB concentrations, in which the formation of highly entangled structures may have occurred. The model provides an estimate of 0.05 for the crosslink parameter (C _P) and 130 s^?1 for the rate constant of cyclization for the smallest sequence (three units) at 90 °C.

     

Kinetic Modeling of the Suspension Copolymerization of Styrene/Divinylbenzene with Gel Formation

Summary : Experimental and theoretical studies concerning the suspension copolymerization of styrene with divinylbenzene are reported. Experiments were carried out in a batch stirred reactor, at 1.2 dm³ scale, and extended beyond gelation in order to synthesize insoluble material. Looking for real time information concerning the building process of such materials, these polymerizations were In-line monitored using a FTIR-ATR immersion probe. Polymer samples collected before and after gelation were Off-line characterized using a SEC/RI/MALLS system allowing the measurement of monomer conversion, average molecular weights, MWD and also the z-average radius of gyration. The weight fraction of insoluble material (gel) was measured for samples with different reaction times. The experimental program has included the study of the influence of key polymerization parameters on the dynamics of gelation and some properties of the resulting networks, namely the initial mole fraction of crosslinker and the initial proportions between monomers and inert diluent. Variable n-heptane/toluene mixtures were used within this purpose. These experimental observations were complemented with theoretical studies using a general kinetic approach allowing the prediction of MWD and z-average radius of gyration before and also after gelation. Comparison of the experimental measurements with these predictions is being exploited to develop modeling tools useful for the design of operating conditions allowing the improvement of the performance of the final products.     

Nitroxide‐Mediated Controlled/Living Free Radical Copolymerization of Styrene and Divinylbenzene in Aqueous Miniemulsion

Summary: The nitroxide‐mediated controlled/living free radical copolymerization of styrene and divinylbenzene using a polystyrene‐TEMPO macroinitiator in aqueous miniemulsion and in bulk have been investigated. The crosslink densities were estimated based on the content of pendant vinyl groups as determined by ¹H NMR. Considerably lower crosslink densities were revealed in the miniemulsion than in the corresponding bulk system. The rate of polymerization in the miniemulsion increased with decreasing particle size, and was significantly higher than in bulk.

Crosslink density for the TEMPO‐mediated free radical copolymerization of S(1) and DVB(2) (f = 0.99, f = 0.01) at 125 °C in bulk (□) and in miniemulsions with d_n = 585 nm (○) and 53.3 nm (•).     

SiO2表面RAFT接枝聚合苯乙烯

基于纳米SiO2表面羟基与7-甲基丙烯酰氧基丙基三甲氧基硅烷间的偶联反应,在纳米SiO2表面引入可聚合双键。采用可逆加成断裂链转移（RAFT）聚合技术,以偶氮二异丁腈为引发剂,使SiO2表面接枝聚合苯乙烯。考察了二硫代苯甲酸异丁腈酯、二硫代苯甲酸苄酯、（1,2,4-三氮唑）基二硫代甲酸苄酯和二硫代新戊酸苄酯等对SiO2表面接枝聚合苯乙烯速率的影响。结果表明,SiO2表面接枝聚合苯乙烯的速率决定于RAFT试剂的Z基团结构。二硫代新戊酸苄酯调控的SiO2表面接枝聚合苯乙烯的速率最高。     

两亲性RAFT试剂存在下丙烯酸六氟丁醋和苯乙烯的无皂乳液聚合

合成了具有两亲性结构的可逆加成断裂链转移(RAFT)试剂,在RAFT试剂的作用下,通过无皂乳液聚合方法合成了丙烯酸六氟丁酯与苯乙烯的共聚物.研究了RAFT试剂浓度和聚合温度对聚合动力学、聚合反应可控性及乳胶粒粒径的影响.通过红外光谱(FTIR)、核磁共振谱(1H NMR)、示差扫描量热仪(DSC)、凝胶渗透色谱仪(GPC)及表面张力仪表征了共聚物的结构、玻璃化转变温度(Tg)、分子量和分子量分布及乳胶膜表面性能.结果表明,得到的苯乙烯和丙烯酸六氟丁酯共聚物无皂乳液的乳胶粒粒径在100 nm左右且呈单分散分布.当RAFT试剂浓度高于0.016 mol/L时聚合体系有较好的可控性.共聚物乳液的乳胶膜对水和二碘甲烷的接触角都很高.     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基嵌段共聚

活性聚合以其无链转移、无链终止和引发速度远大于增长速率的特点,应用于合成单分散聚合物、预定序列结构的嵌段共聚物等．常用的活性聚合方法如阴离子聚合、阳离子聚合及基团转移聚合对反应条件要求苛刻,不能用于丙烯酸酯类极性单体和苯乙烯类非极性单体的嵌段共聚．与...     

Mn-Re双核金属化合物调控的苯乙烯的类RAFT聚合反应研究

报道了以Mn-Re双核金属有机化合物作为RAFT聚合中链转移试剂的稳定基团进行的苯乙烯的本体聚合。聚合物的数均分子量明显随转化率线性增长,并且聚合物的多分散系数PDI值小于1·5。据此推断,苯乙烯本体聚合反应可能是以类似于可逆加成-断裂链转移自由基聚合(RAFT)的机理进行的。     

两亲性RAFT试剂存在下丙烯酸六氟丁醋和苯乙烯的无皂乳液聚合

合成了具有两亲性结构的可逆加成断裂链转移(RAFT)试剂,在RAFT试剂的作用下,通过无皂乳液聚合方法合成了丙烯酸六氟丁酯与苯乙烯的共聚物.研究了RAFT试剂浓度和聚合温度对聚合动力学、聚合反应可控性及乳胶粒粒径的影响.通过红外光谱(FTIR)、核磁共振谱(1H NMR)、示差扫描量热仪(DSC)、凝胶渗透色谱仪(GP...     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基共聚

研究了甲基丙烯酸丁酯和苯乙烯两种不同极性单体的原子转移自由基嵌段共聚和无规共聚，得到了实测分子量与理论分子量相近、分子量分布较窄的嵌段共聚物和无规共聚物。聚合过程中分子量和单体转化率成比例增加，多分散性指数变化不大。用＾１Ｈ ＮＭＲ法测定共聚组成，Ｋdisplay status     

Batch Emulsion Polymerization of Styrene Stabilized by a Hydrophilic Macro‐RAFT Agent

Summary: A well‐defined homopolymer of 2‐(diethylamino)ethyl methacrylate has been synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization using (4‐cyanopentanoic acid)‐4‐dithiobenzoate as a chain transfer agent. The corresponding protonated homopolymer with a very reactive dithiobenzoate end group has been used as a water‐soluble macromolecular chain transfer agent in the batch emulsion polymerization of styrene without any surfactant. The reaction leads to a stable latex, as a result of the in‐situ formation of an amphiphilic block copolymer stabilizer, via transfer reaction to the dithioester functions during the nucleation step. The work does not intend to apply controlled free‐radical polymerization in an aqueous dispersed system but takes advantage of the RAFT technique to create a well‐defined polyelectrolyte, with a high chain‐end reactivity.

Schematic of the formation of the stabilized latex by the in situ formation of an amphiphilic block copolymer stabilizer.     

PSt-TMI合成及其共聚动力学研究

以BP0为引发剂,甲苯为溶剂,采用溶液聚合法合成了低3-异丙烯基一α,α’-二甲基苄基-异氰酸酯(TMI)含量的PSt-TMI共聚物(wTMI-O．03～O．11),确定了FTIR方法测定共聚物中TMI含量的方法,并对反应动力学与共聚物组成进行了研究。结果表明：总体反应速率与单体浓度成正比,与引发剂浓度O．5次方成正比,80℃下反应时还存在热引发,终止方式为双基终止;反应总体活化能随单体配比中TMI分率增大而升高。引发剂浓度增大则产物分子量减小,分子量分布不变。随反应转化率提高分子量分布指数增大、产物中TMI含量略有下降。GPC串联紫外分析表明,产物中高分子量部分TMI含量高于低分子量部分中TMI含量。     

通过RAFT聚合制备SiO2/接枝共聚物纳米杂化粒子

以二氧化硅(SiO2)纳米粒子表面键接的二硫代苯甲酸酯作为可逆加成-断裂-链转移(RAFT)聚合反应的链转移剂, 在室温下引发苯乙烯和马来酸酐进行表面RAFT交替共聚反应, 制得了SiO2/苯乙烯-alt-马来酸酐杂化材料. 通过聚氧化乙烯(PEO)的羟基与马来酸酐的酯化反应, 将PEO接枝到SiO2纳米粒子的表面, 增加了硅粒子的生物相容性. 用FTIR, TGA和TEM对杂化材料的结构、组成和形貌进行了表征.     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.     

St-DVB凝胶化反应动力学机理的模型理论研究

高分子凝胶化反应对功能高分子骨架结构有重要影响，它经历溶胶一凝胶的不可逆转变（sol－geltransition）；导致高分子网络结构及分子尺寸的突变，动力学过程和机理十分复杂，因此，人们对这一领域的研究始终贯注了巨大兴趣．追溯过去，人们对高分子凝胶化过程的研究经历了由未考虑环化、搭环的Flory－stockmayer理论问；静态渗流理论［’］到动态凝胶化模型＊三个发展阶段·后者除克报了前两种的不足外，还引入了与几何形状密切相关的动态标度处理方法．近年来，分形概念的产生更激励了动态标度的发展，这种增长模型的研究方法考虑了增长…