偏最小二乘分光光度法同时测定痕量铁、锰、铜、锌、钴和镍

痕量Fe^3 ,Mn^2 ,Cu^2 ,Zn^2 ,Co^2 ,Ni^2 与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚（5－Br-PADAP)和溴化十六烷基三甲基铵（CTMAB）在PH8．3时发生高灵敏显色反应，所形成的三元胶束络合的吸收光谱严重重叠，采用偏最小二乘法（PLS）辅助分光光度法测定了合成试样及饲料中上述6种痕量组分，结果表明，PLS法是化学计量学中一种可适用于基体较复杂的实际试样中痕量组分分光度同时测定的多元计算方法。     

偏最小二乘法辅助分光光度法同时测定痕量锰、铁、铜和锌

痕量Mn（Ⅱ）、Fe（Ⅲ）、Cu（Ⅱ）和Zn（Ⅱ）与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚和聚乙二醇辛基本基醚在pH8．8发生高灵敏的显色反应，所形成的三元胶束络合物的吸收光谱严重重叠，用偏最小二乘法（PLS）辅助分光光度法成功地同时测定了模拟试样及铝合金和饲料添加剂中上述四种痕量组分。结果表明，PLS法是化学计量学法中一种可适用于基体较复杂的实际试样中痕量组分同时分光光度测定的优良的多元计算方法。     

偏最小二乘法辅助分光光度法同时测定痕量锰,铁铜和锌

痕量Ｍｎ（Ⅱ），Ｆｅ（Ⅲ），Ｃｕ（Ⅱ）和Ｚｎ（Ⅱ）与２－（５－溴－２－吡啶偶氮）－５－二乙氨基苯酚和聚乙二醉辛基苯基醚在ｐｈ８．８发生高灵敏的显色反应，所形成的三元胶束络合物的吸收光谱严重重叠，用偏最小二乘法（ＰＬＳ）辅助分光光度法成功地同时测定了模拟试样及铝合金和饲料添加剂中上述四各痕量组分，结果表明，ＰＬＳ法是化学计量学法中一种可适用于式体较复杂的实际试样中痕量组分同时分光光度测定的优良的多元     

PLS法在同时分光光度测定痕量金属离子中的应用

本文研究了新显色剂4-(2-苯并噻唑偶氮)邻苯二酚-Mo(Ⅵ)、W(Ⅶ)-二苯胍三元配合物的高灵敏显色反应以及偏最小二乘法(PLS)在同时分光光度测定痕量钼和钨中的应用。与共轭梯度法和线性规划法相比,PLS法的运行时间短,结果更准确可靠,尤其适用于处理成批试样,为带微处理机的分光光度计提供了一种新的计算方法。     

偏最小二乘法-紫外光度法同时测定防腐剂尼泊金乙酯钠、山梨酸钾和苯甲酸钠

介绍一种快速、简便同时测定食用防腐剂尼泊金乙酯钠、山梨酸钾和苯甲酸钠的紫外光度法。在pH5．72的B—R缓冲溶液中对尼泊金乙酯钠、山梨酸钾和苯甲酸钠3组分混合溶液进行吸光度测定,所得的重叠波谱数据用主成分回归法（PCR）和偏最小二乘法（PLS）逆行处理,结果表明,偏最小二乘法的测定误差较小。尼泊金乙酯钠、山梨酸钾和苯甲酸钠的线性范围均为1～10mg／L,回收率为84．5％～108．2％。用该法对样品进行测定,获得了较好的定量分析结果。     

冷原子荧光光谱法测定含朱砂中成药中痕量汞的样品消解溶剂选择

目的为了测定紫金锭、复方牛黄消炎胶囊等含朱砂中成药样品中痕量汞的含量,方法比较并确定了高压密封消解法适用的消解溶剂体系。结果以y（王水）＋V（H2O2）=5＋1为消解溶剂,高压密封消解-冷原子荧光法测得紫金锭和复方牛黄消炎胶囊样品的总汞含量分别为7．22％和2．66％,样品的加标回收率为96．2％-97．8％,RSD小于2％（n=3）;结论实验表明,y（王水）＋y（H2O2）=5＋1混合溶剂适用于紫金锭、复方牛黄消炎胶囊等含朱砂中成药样品的消化,获得的样品汞含量测定结果令人满意。     

混合线性分析-分光光度法同时测定微量锌、镉、汞

提出了以2－（5－溴－2－吡啶偶氮）－5－二乙氨基酚为显色剂分光光度法同时测定锌、镉、汞的新方法。由于在可见区3种络合物的吸收光谱具有相似的特征和严重重叠,本文采用混合线性分析进行光谱分辨,各组分的纯光谱则用最小二乘法从校正集中求出。讨论了显色条件,波长选择,纯光谱的确定和吸光度加合性等因素对测定的影响。方法具有简单,快速,准确等优点。已成功地应用于混合试样中锌、镉、汞的同时测定,并与同条件下偏最小二乘法的计算结果进行了对比。     

利用FAAS法测定利水渗湿类中草药中锌、铁、铜、锰含量

采用火焰原子吸收分光光度法（FAAS）测定了6种利水渗湿类中草药（茯苓、泽泻、苡仁、茵陈、猪苓、革解）中锌、铁、铜、锰4种微量元素的含量．采用浓的HNO3＋HClO4（4＋1,V/V）混合酸消解样品,对测定结果进行了准确度和精密度评价,其加标回收率在92．3％-109．0％之间,相对标准偏差（RSD）不大于2．31％．测定结果表明：6种中草药中都含有丰富的微量元素,其中Cu含量相对偏低．     

固相萃取-分光光度法测定海水中痕量活性磷酸盐

磷钼蓝（PMB）与十六烷基三甲基溴化铵（CTMAB）可生成疏水性的PMB-CTMAB离子缔合物,被Sep—Pak C18小柱萃取富集,基于此建立了SEP—PAK C18小柱固相萃取-分光光度法测定海水中痕量活性磷酸盐的新方法。对洗脱液酸度、萃取流速、试剂用量、反应时间与温度等实验参数进行了优化选择,并考察了盐度对测定结果的影响。实验结果表明,PMB-CTMAB在SEP-PAK C19小柱上可被有效地定量萃取;盐度在25～45范围内,对测定结果没有影响。在优化的实验条件下,以盐度为35的人工海水作为基底,方法的线性范围为0．18～4．00μg/L;平均回收率为98．5％;检出限为0．05μg／L。对实际海水中痕量活性磷酸盐进行测定,相对标准偏差（RSD）为2．7％-5．6％。与广泛采用的MAGIC法比较,结果无显著差异。新方法具有消耗试样体积少、测定速度快等优点。     

小波变换-偏最小二乘法用于钨、钼、钛的分光光度法同时测定

1引言小波分析方法是一种新发展起来的数学方法。本文采用小波分析光谱实验数据进行预处理,然后用偏最小二乘法（PLS）进行校正,完成了钨、钼、钛的同时测定。2实验部分2．1主要仪器与试剂日立557双波长分光光度计;奔腾586微机。W（Ⅵ）标准溶液10mg／L;Mo（Ⅵ）标准溶液2mg／L;Ti（Ⅳ）标准溶液2mg／L;水杨基荧光酮（SAF）1．0×10－3mol／L;溴化十六烷基三甲铵（CTMAB）5×10－3mol／L。2．2实验步骤（1）取一定量的W、Mo、Ti标准溶液于25mL比色管中,依次加入2mL5mol／LHCl,2,5mLSAF溶液,4．0mL（：：FNIn,然看…     

Highly sensitive and specific determination of mercury(II) ion in water, food and cosmetic samples with an ELISA based on a novel monoclonal antibody

Mercury is one of the most toxic heavy metals present in the environment. In this study, a highly sensitive and specific monoclonal antibody (mAb)-based indirect competitive enzyme-linked immunosorbent assay (ELISA) for the determination of Hg(2+) was developed. A new bifunctional ligand, 6-mercaptonicotinic acid (MNA), which contains a pyridine ring bearing a carboxylic group and a mercapto group, was selected for the preparation of immunogen. After immunization of mice and performing the hybridoma technique, the obtained mAb was characterized for its binding affinity and selectivity for Hg(2+). Based on this novel mAb, an ELISA was established. At optimal experimental conditions, the standard curve of the ELISA for Hg(2+) was constructed in concentration range of 0.1-100 ng mL(-1). The values of IC(50) and LOD of the assay were found to be 1.12 and 0.08 ng mL(-1). The cross-reactivity was lower than 2% with MNA, CH(3)Hg, and CH(3)Hg-MNA and was 11.5% and 4.4% for Hg(+) and Au(3+), respectively. No cross-reactivity was found with other metal ions such as Cu(2+), Sn(2+), Ni(2+), Mn(2+), Pb(2+), Zn(2+), Cd(2+), Fe(2+), Co(2+), Mg(2+), Ca(2+), and anions such as Cl(-), NO(3)(-), NO(2)(-), HCO(3)(-), F(-), and SO(4)(2-), indicating that the assay displays not only high sensitivity but also high selectivity. Different kinds of samples including water, milk, green vegetable, kelp, facial cleanser, and night cream were spiked with Hg(2+) and the extracts were analyzed by ELISA. Acceptable recovery rates of 80.0-113.0% and coefficients of variation of 1.9-18.6% were obtained. A linear relationship between ELISA and cold-vapor atomic fluorescence spectroscopy (CV-AFS) as indicated by a correlation coefficient of 0.97 for liquid samples (water samples) and 0.98 for other samples was obtained. The proposed mAb-based ELISA provides a feasible analytical method for highly sensitive and specific, fast, simple, and accurate determination of uncomplexed trace Hg(2+) in environmental and food samples.     

Extractive-spectrophotometric determination of molybdenum as mixed-ligand complexes with thiocyanate and amidopyridines

A fairly selective and sensitive method is described for the determination of microgram amounts of molybdenum(V) by means of its reaction with thiocyanate and the enolic form of various amidopyridines and extraction into benzene. The molar absorptivity of the complexes is in the range 1.5-1.9 x 10(4) l.mole(-1).cm(-1) at lambda(max) 470 nm. The method is applicable in 1.5-7M hydrochloric acid or 1.2-6(M) sulphuric acid media. Cu(+), Co(2+), Mn(2+), Zn(2+), Ni(2+), Cd(2+), Fe(3+), Al(3+), Cr(3+), Ti(4+), Zr(4+), V(V), Nb(5+), Ta(5+), W(VI) and U(VI) do not interfere.     

Synthesis, structural charaterization, and electrochemical and optical properties of ferrocene-triazole-pyridine triads

The synthesis and electrochemical, optical, and cation-sensing properties of the ferrocene-triazole-pyridine triads 3 and 5 are presented. Azidoferrocene 1 and 1,1'-diazidoferrocene 4 underwent the "click" reaction with 2-ethynylpyridine to give the triads 3 and 5 in 81% and 68% yield, respectively. Electrochemical studies carried out in CH(3)CN in the presence of increasing amounts of Zn(2+), Ni(2+), Cd(2+), Hg(2+), and Pb(2+) metal cations, showed that the wave corresponding to the ferrocene/ferrocenium redox couple is anodically shifted by 70-130 mV for triad 3 and 167-214 mV for triad 5. The maximum shift of the ferrocene oxidation wave was found for 5 in the presence of Zn(2+). In addition, the low-energy band of the absorption spectra of 3 and 5 are red-shifted (Δλ = 5-10 nm) upon complexation with these metal cations. The crystal structures of compounds 3 and 5 and the complex [3(2)·Zn](2+) have been determined by single-crystal X-ray methods. (1)H NMR studies as well as density functional theory calculations have been carried out to get information about the binding sites that are involved in the complexation process.     

Beta-silyl-substituted silaadamantyl,silabicyclo[2.2.2]octyl,silanorbornyl, and 1-silacyclohexyl cations. A theoretical (DFT and GIAO NMR) study

Parent 1-silaadamant-1-yl (1+) and a series of mono-beta-silyl-substituted- (2-Me+, 2-F+, 2-Cl+, 2-Br+), bis-beta-silyl-substituted- (3-Me+), and tris-beta-silyl-substituted (4-Me+)-1-silaadamant-1-yl cations were studied by the DFT method at the B3LYP/6-31G(d,p) level and by GIAO NMR at the B3LYP/ 6-31G(d,p)//B3LYP/6-31G(d,p) level. The geometries, relative energies, NMR chemical shifts, and charge distribution in the bridgehead silylium ions are discussed and compared. The magnitude of the beta-silyl effect (the Si-C-Si+ hyperconjugation) is gauged as a function of structure. Related model studies on the silabicyclo[2.2.2]octyl (5+, 6+, 5a+, and 6a+), silanorbornyl (7+ and 8+), and silacyclohexyl cations (9+ and 10+) were carried out in which the effect of beta-silyl substitution on geometry, stability, and NMR chemical shifts was probed. The acyclic model Me3Si-CH2-Si+(Me)2 (11+) was used to gauge the influence of the twist angle between the p-orbital at Si+ and the C-Si bond on relative stability and on the changes in the 29Si NMR chemical shifts. Finally, interaction of 1+ with H2O and MeOH and 2-Me+ with H2O was also examined. The resulting optimized structures (12+, 13+, and 14+) and the computed NMR chemical shifts are most compatible with the formation of silaoxonium ions.     

A novel sequential injection--Cold vapour atomic absorption spectrometric system for rapid and reliable determination of mercury

A simple and rapid method is described for reliable determination of ultra-trace concentrations of mercury based on a novel combination of a sequential injection (SI) system with cold vapour atomic absorption spectrometry (CVAAS). The SI-CVAAS method achieved a very high sampling frequency of 180h(-1), a detection limit of 0.2-0.3ngmL(-1), a dynamic range of 0-60ngmL(-1) and requires only 0.2-0.6mL of sample. The presence of common metal ions, such as Cu(2+), Pb(2+), Cd(2+), Zn(2+), Fe(3+), Co(2+), Ni(2+) and Mn(2+), did not interfere with the measurement of mercury by this method. Also the interference from organic matter, such as humic substances, was easily reduced or eliminated by appropriate sample dilution. The method was successfully applied to the determination of mercury in lake sediment samples and a river sediment reference material. An average percentage recovery of 101.2% was achieved by the SI-CVAAS method for mercury in the reference material with a R.S.D. of 1.8%.     

Polarographic behaviour and determination of acrivastine in capsules and human urine

Dibenzo-18-crown-6 (DB18C6) is used for the liquid-liquid extraction, and recovery of titanium from paints, pigment, paper and pulp industries. The extraction mechanism of titanium(IV) from pH 4 medium with DB18C6 in dichloromethane was investigated. The DB18C6 concentration in organic phase, the concentration of titanium, the effect of pH and interference ions such as Mo(6+), V(5+), Nb(5+), Ta(5+), Zr(4+), Fe(3+), etc. in the aqueous phase and the temperature on the distribution coefficient for the Ti(IV) have been examined. The titanium was determined by spectrophotometric and inductively coupled plasma atomic emission spectroscopic (ICP-AES) method. Titanium forms a colourless complex with DB18C6 at pH 4.0 which is extracted with dichloromethane having molar absorptivity 1.53x10(4) lmol(-1)cm(-1) at 285 nm. It obeys Beer's law in the range of 0.16-3.84 ppm of titanium. The colour was developed with thiocyanate which has molar absorptivity 1.50x10(3) lmol(-1)cm(-1) at 425 nm. The extract is directly inserted in the plasma for ICP-AES measurement, which enhance the sensitivity several folds and the limits for estimation are 0.5-30 ngml(-1). The overall formation (logbeta(2)K'e) and extraction (K(ex)) constants calculated are 18.61+/-0.02 and 1.03+/-0.03x10(-10), respectively. The transportation of titanium has been discussed. The titanium is preconcentrated and determined in standard and environmental samples.     

Separation and determination of cations in beverage products by capillary zone electrophoresis

Cation determination is important for quality control of beverage products. To determine a large group simultaneously, a capillary electrophoresis procedure is developed with indirect UV at 214 nm in a three-complex buffer system (10 mM N,N-dimethylbenzylamine (DBA), 8 mM lactic acid and 2 mM 18-crown-6) with good mobility matching with desired cations. Under optimized conditions with pH adjusted to 4.65, a baseline separation is achieved for 14 cations (Rb(+), NH(4)(+), K(+), Ca(2+), Na(+), Mg(2+), Mn(2+), Co(2+), Fe(2+), Cd(2+), Cr(3+), Ni(2+), Zn(2+) and Cu(2+)) within 7 min using an uncoated silica column. To cover ng/l to mug/l range, both hydrostatic and electrokinetic sampling are studied, showing working ranges within (0.05-50)/(0.005-2) microg/l and detection limits (13-78)/(1.4-10) ng/l, respectively with satisfactory repeatability (RSD 0.31-0.47% for migration time, and 3.0-4.0% for peak height measurement). Agreeable results with established inductively coupled plasma-atomic emission spectrometry method have been obtained for orange juice and tea samples.     

Determination of nickel by anodic adsorptive stripping voltammetry with a cation exchanger-modified carbon paste electrode

The behavior of a modified carbon paste electrode (CPE) for nickel determination by anodic adsorptive stripping voltammetry (AAdsSV) was studied. The electrode was built incorporating the Dowex 50W x 12 (H(+) form) ion exchanger to a Nujol-graphite base paste. Ni(2+) was preconcentrated on the electrode surface in open circuit conditions, with the reduction (-1300 mV)/reoxidation step carried out in HCl solution (pH 3). During deposition time (5 min), the hydrogen evolution did not present obstacle in the quantification of nickel. For 12 min of accumulation and 5 min of deposition, nickel can be quantified up to 600 mug l(-1). The detection limit was 0.005 mug l(-1) at a linear potential scan rate of 200 mV s(-1). Interferences from Hg(2+) and Ag(2+) up to a concentration of 1 and 0.6 mg l(-1), respectively, were eliminated with the aid of the anion exchanger Dowex-2 (mesh 200-400) which was added to the sample in the preconcentration step. The tolerance for some metal ions such as Cu(2+), Cd(2+), Fe(3+), Zn(2+), Co(2+) and Pb(2+) was improved in the same way. The method was applied for the determination of nickel in samples of tap and mineral water. At the concentration level of 50 mug l(-1) of Ni (2+), the results were in good agreement with those obtained using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). For a Ni(2+) concentration of 5 mug l(-1), the results obtained showed better accuracy than those obtained by ICP-AES.     

A thiazole-containing tripodal ligand: synthesis, characterization, and interactions with metal ions and matrix metalloproteinases

A new tripodal ligand, tris[2-(((2-thiazolyl)methylidene)amino)ethyl]amine (Tatren), has been synthesized and characterized by NMR, IR, and UV-visible absorbance spectroscopy and elemental analysis. Tatren forms stable complexes with transition metal ions (Zn(2+), 1; Mn(2+), 2; Co(2+), 3) and the alkaline earth metal ions (Ca(2+), 4; Mg(2+), 5). Single-crystal X-ray structures of 1, 2, and 5 revealed six-coordinate chelate complexes with formula [M(Tatren)](ClO(4))(2) in which the metal centers are coordinated by three thiazolyl N atoms and three acyclic imine N atoms. Crystals of 1, 2, and 5 are monoclinic, P2(1)/c space group. Crystals of 4 are triclinic, P space group. The Ca(2+) complex is eight-coordinate with all N atoms of Tatren and one water molecule coordinated to the metal ion. Spectrophotometric titrations show that formation constants for the chelates of metal ions are >1 in methanol. Free Tatren inhibits the catalytic domain of matrix metalloproteinase-13 (MMP-13, collagenase-3) with K(i) = 3.5 +/- 0.6 microM. Molecular mechanics-based docking calculations suggest that one leg of Tatren coordinates to the catalytic Zn(2+) in MMPs-2, -9, and -13 with significant hydrogen bonding to backbone amide groups. High-level DFT calculations suggest that, in the absence of nonbonded interactions between Tatren and the enzyme, the most stable first coordination sphere of the catalytic Zn(2+) is achieved with three imidazolyl groups from His residues and two imine N atoms from one leg of Tatren. While complexes (1-3) do not inhibit MMP-13 to a significant extent, 4 does (K(i) = 30 +/- 10 microM). Hence, this study shows that tripodal chelating ligands of this class and their Ca(2+) complexes have potential as active-site inhibitors for MMPs.     

Highly sensitive, selective, and rapid fluorescence Hg2+ sensor based on DNA duplexes of poly(dT) and graphene oxide

Coupling T base with Hg(2+) to form stable T-Hg(2+)-T complexes represents a new direction in detection of Hg(2+). Here a graphene oxide (GO)-based fluorescence Hg(2+) analysis using DNA duplexes of poly(dT) that allows rapid, sensitive, and selective detection is first reported. The Hg(2+)-induced T(15)-(Hg(2+))(n)-T(15) duplexes make T(15) unable to hybridize with its complementary A(15) labelled with 6'-carboxyfluorescein (FAM-A(15)), which has low fluorescence in the presence of GO. On the contrary, when T(15) hybridizes with FAM-A(15) to form double-stranded DNA because of the absence of Hg(2+), the fluorescence largely remains in the presence of GO. A linear range from 10 nM to 2.0 μM (R(2) = 0.9963) and a detection limit of 0.5 nM for Hg(2+) were obtained under optimal experimental conditions. Other metal ions, such as Al(3+), Ag(+), Ca(2+), Ba(2+), Mg(2+), Zn(2+), Mn(2+), Co(2+), Pb(2+), Ni(2+), Cu(2+), Cd(2+), Cr(3+), Fe(2+), and Fe(3+), had no significant effect on Hg(2+) detection. Moreover, the sensing system was used for the determination of Hg(2+) in river water samples with satisfactory results.