1-羟基-2-(1-甲基咪唑-2-基)乙烷-1,1-双膦酸的合成

自从Fleisch等入[1]发现双膦酸盐类化合物的亲骨作用以来,双膦酸盐化合物逐渐成为治疗骨骼方面疾病的药物,包括骨质疏松症,肿瘤病并发的高钙血症和骨痛,变形性骨炎(Paget’s病)和多发性骨髓瘤[2-3]。目前以唑来膦酸[化学名为2-(2-甲基-咪唑-1-基)-1-羟基乙烷-1,1-双膦酸]综合疗     

离子液体-乙腈混合溶剂中电催化CO2与甲醇合成碳酸二甲酯

常温常压下分别在离子液体 1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF4)-MeCN混合溶剂和纯MeCN溶剂中研究了CO2在Cu电极上的循环伏安行为. 结果表明, CO2均发生不可逆还原反应生成CO-2. 与纯MeCN溶剂相比,在混合溶剂中CO2还原峰电位均有正移. 这表明溶剂中的咪唑型离子液体对活化CO2有催化作用. 在混合溶剂中,以CO2和MeOH为原料合成碳酸二甲酯(DMC), 考察了[bmim]BF4/MeCN体积比、工作电极材料、 MeOH浓度和电解电位等对DMC产物收率的影响. 与其他DMC合成方法相比,本法反应条件温和、设备简单、合成产物收率较高. 在优化的条件下, DMC产物收率可达79.6%. 并提出了合成DMC可能的反应机理.     

高效液相色谱法测定咪唑中2-甲基咪唑和4-甲基咪唑

采用高效液相色谱法测定咪唑中2-甲基咪唑和4-甲基咪唑的含量。采用XDB C18色谱柱为分离柱,以pH 3.5的0.05mol·L-1磷酸二氢钾缓冲溶液与甲醇以体积比95比5组成的混合溶液为流动相,流量为1.0mL·min-1,在波长210nm处进行二极管阵列检测。2-甲基咪唑和4-甲基咪唑均在0.10~25.0mg·L-1范围内与其峰面积呈线性关系,检出限(3S/N)分别为20,40mg·kg-1。在1.00,5.00,20.0mg·L-1 3个浓度水平进行加标回收试验,回收率在89.0%~103%之间,测定值的相对标准偏差(n=7)在0.58%~3.0%之间。     

1-烷基-2-甲基咪唑衍生物的高效简便合成

本文优化了溴乙烷与2-甲基咪唑的N-烷基化反应条件,并且高收率地合成了一系列具有抗菌活性的1-烷基-2-甲基咪唑衍生物。     

双(1-甲基咪唑-2-基)甲酮、双(1-甲基咪唑-2-基)甲烷及双(1-甲基咪唑-2-基)乙烯与第六族羰基金属化合物的反应研究(英文)

本文研究了羰基钼(钨)与双(1-甲基咪唑-2-基)甲酮和双(1-甲基咪唑-2-基)甲烷以及双(1-甲基咪唑-2-基)乙烯的反应,获得了6个双齿螯合的双(1-甲基咪唑-2-基)甲酮,双(1-甲基咪唑-2-基)甲烷和双(1-甲基咪唑-2-基)乙烯四羰基金属衍生物,以及1个单齿配位的双(1-甲基咪唑-2-基)乙烯五羰基钨化合物。它们的结构通过红外,核磁以及X-射线单晶衍射分析得到确证。所有这些新化合物的电化学测试表明,它们只存在一个不可逆的氧化过程。     

4,5-二苯基-2-取代基-1-磺酰基咪唑的合成

用多种磺酰氯或磺酸酐与4,5-二苯基-2-取代-1-磺酰基咪唑负离子反应, 合成了10个未见文献报道的1-磺酰基咪唑类化合物. 所有化合物均经1H NMR和13C NMR确证.     

高效液相色谱法测定咪唑生产工艺中反应液中咪唑及2种杂质2-甲基咪唑和4-甲基咪唑

建立了高效液相色谱(HPLC)外标定量分析咪唑生产工艺中反应液中咪唑及杂质2-甲基咪唑和4-甲基咪唑含量的方法。在色谱分析中,选用Supersil-ODS-B色谱柱为固定相;选用体积比为40∶60的乙腈-离子对试剂(溶液pH为3.5,内含16 mmol·L~(-1)十二烷基硫酸钠和17mmol·L~(-1)磷酸二氢钾)溶液为流动相进行等度洗脱;采用二极管阵列检测器进行检测,检测波长为210nm。结果显示:咪唑、2-甲基咪唑及4-甲基咪唑标准曲线的线性范围均为10～100mg·L~(-1),检出限(3S/N)分别为0.02,0.02,0.03mg·L~(-1)。咪唑在20mg·L~(-1)和100mg·L~(-1)添加水平下的平均加标回收率分别为100%,99.2%,相对标准偏差(n=8)为0.27%。用本方法对同一批反应液不同反应阶段的9个样品中咪唑进行了测定,测定值为10.11%～10.71%;杂质2-甲基咪唑有检出,但低于测定下限;杂质4-甲基咪唑未检出。与气相色谱法进行了比对,两者测定结果基本一致。试验结果表明,该方法准确度好、灵敏度高、重现性好,能够准确测定咪唑生产工艺中反应液中咪唑、2-甲基咪唑及4-甲基咪唑的含量。     

1-甲基-3,4-二苯基喹啉-2(1H)-酮的合成和结构表征

以N-甲基苯胺和苯丙炔酸为原料,经过缩合、亲电环化、偶联反应合成了1-甲基-3,4-二苯基喹啉-2(1H)-酮;利用核磁共振谱和气相色谱-质谱表征了产物的结构.结果表明,所用合成方法具有产率高、反应条件温和、操作简单等优点,目标产物的总产率达62.7%.     

1-丁基-3-甲基咪唑磷钨酸盐的制备及其对酯化反应的催化性能

以溴化1-丁基-3-甲基咪唑盐([bmim]Br)和磷钨酸(H3PW12O40)为原料制备了1-丁基-3-甲基咪唑磷钨酸盐([bmim]3PW12O40)催化剂,并用傅里叶变换红外光谱、热重分析-差示扫描量热法、正丁胺电位滴定及元素分析等技术对催化剂进行了表征,考察了催化剂对乙醇与乙酸酯化合成乙酸乙酯反应的催化活性.结果表明,[bmim]3PW12O40中有3个结晶水,并保持有H3PW12O40的Keggin结构和酸强度,[bmim]3PW12O40的酸量明显少于H3PW12O40的酸量.在乙醇与乙酸酯化合成乙酸乙酯反应中,[bmim]3PW12O40催化剂具有较高的催化活性和较好的重复使用性能.     

Nanostructures for Electrocatalytic CO2 Reduction

One of the most effective ways to cope with the problems of global warming and the energy shortage crisis is to develop renewable and clean energy sources. To achieve a carbon-neutral energy cycle, advanced carbon sequestration technologies are urgently needed, but because CO₂ is a thermodynamically stable molecule with the highest carbon valence state of +4, this process faces many challenges. In recent years, electrochemical CO₂ reduction has become a promising approach to fix and convert CO₂ into high-value-added fuels and chemical feedstock. However, the large-scale commercial use of electrochemical CO₂ reduction systems is hindered by poor electrocatalyst activity, large overpotential, low energy conversion efficiency, and product selectivity in reducing CO₂. Therefore, there is an urgent need to rationally design highly efficient, stable, and scalable electrocatalysts to alleviate these problems. This minireview also aims to classify heterogeneous nanostructured electrocatalysts for the CO₂ reduction reaction (CDRR).     

Metal-Based Aerogels Catalysts for Electrocatalytic CO2 Reduction

General strategies for metal aerogel synthesis, including single-metal, transition-metal doped, multi-metal-doped, and nano-metal-doped carbon aerogel are described. In addition, the latest applications of several of the above-mentioned metal aerogels in electrocatalytic CO₂ reduction are discussed. Finally, considering the possibility of future applications of electrocatalytic CO₂ reduction technology, a vision for industrialization and directions that can be optimized are proposed.     

Underevaluated Solvent Effects in Electrocatalytic CO2 Reduction by FeIII Chloride Tetrakis(pentafluorophenyl)porphyrin

Fe^III chloride tetrakis(pentafluorophenyl)porphyrin ( 1 ) is known to have poor electrocatalytic activity for the CO₂-to-CO conversion in dimethylformamide. In this work, we re-examined Fe porphyrin 1 as a CO₂ reduction catalyst in various solvents. Our results show that 1 displays fairly high electrocatalytic CO₂-to-CO activity in acetonitrile with a turnover frequency (TOF) up to 4.2×10⁴ s⁻¹. On the other hand, 1 shows a modest activity in propylene carbonate, and is inefficient to catalyze CO₂ reduction in benzonitrile, dimethylformamide, and tetrahydrofuran. Several solvent effects were considered, but none of these effects alone can explain the observed large activity difference of 1 for CO₂ reduction in these solvents. Based on the results, it is suggested that more care should be paid when comparing different CO₂ reduction catalysts because solvent effects are significant and are underevaluated.     

还原氧化石墨烯@泡沫镍载CoO纳米花电极制备及催化CO2性能

本文以氧化石墨烯包覆泡沫镍电极(GO@NF)作为基底,采用水热法在GO@NF基底上原位生长CoO纳米花,同时GO在水热过程中被同步热还原为还原氧化石墨烯(RGO),从而一步制得还原氧化石墨烯包覆泡沫镍负载CoO纳米花电极(CoO/RGO@NF)。使用XRD和SEM对CoO/RGO@NF电极进行表征,发现CoO纳米花均匀生长在泡沫镍三维网络结构上,CoO纳米花为大量针状纳米棒围绕一个中心而成的花状结构,纳米棒的长度约为10 ~ 15 μm,直径约为100 ~ 200 nm。使用循环伏安和线性扫描法测试了CoO/RGO@NF电极电催化CO₂的还原性能,在-0.76 V（vs. SHE）电位下,CoO/RGO@NF电极电催化CO₂还原的电流效率达到70.9%,产甲酸法拉第效率达到65.2%,甲酸产率为59.8 μmol·h^-1·cm^-2,且电极可持续稳定电催化还原CO₂ 4 h,表明CoO/RGO@NF电极对CO₂电还原有着优良的催化活性、选择性和稳定性。     

Surface Reconstruction of Ultrathin Palladium Nanosheets during Electrocatalytic CO2 Reduction

A surface reconstructing phenomenon is discovered on a defect-rich ultrathin Pd nanosheet catalyst for aqueous CO₂ electroreduction. The pristine nanosheets with dominant (111) facet sites are transformed into crumpled sheet-like structures prevalent in electrocatalytically active (100) sites. The reconstruction increases the density of active sites and reduces the CO binding strength on Pd surfaces, remarkably promoting the CO₂ reduction to CO. A high CO Faradaic efficiency of 93 % is achieved with a site-specific activity of 6.6 mA cm⁻² at a moderate overpotential of 590 mV on the reconstructed 50 nm Pd nanosheets. Experimental and theoretical studies suggest the CO intermediate as a key factor driving the structural transformation during CO₂ reduction. This study highlights the dynamic nature of defective metal nanosheets under reaction conditions and suggests new opportunities in surface engineering of 2D metal nanostructures to tune their electrocatalytic performance.     

A Planar,Conjugated N4-Macrocyclic Cobalt Complex for Heterogeneous Electrocatalytic CO2 Reduction with High Activity

Metal complexes have been widely investigated as promising electrocatalysts for CO₂ reduction. Most of the current research efforts focus mainly on ligands based on pyrrole subunits, and the reported activities are still far from satisfactory. A novel planar and conjugated N₄-macrocyclic cobalt complex (Co(II)CPY) derived from phenanthroline subunits is prepared herein, and it delivers high activity for heterogeneous CO₂ electrocatalysis to CO in aqueous media, and outperforms most of the metal complexes reported so far. At a molar loading of 5.93×10⁻⁸ mol cm⁻², it exhibits a Faradaic efficiency of 96 % and a turnover frequency of 9.59 s⁻¹ towards CO at −0.70 V vs. RHE. The unraveling of electronic structural features suggests that a synergistic effect between the ligand and cobalt in Co(II)CPY plays a critical role in boosting its activity. As a result, the free energy difference for the formation of *COOH is lower than that with cobalt porphyrin, thus leading to enhanced CO production.     

Ni2P纳米片用于光催化二氧化碳还原

Artificial photosynthesis is an ideal method for solar-to-chemical energy conversion, wherein solar energy is stored in the form of chemical bonds of solar fuels. In particular, the photocatalytic reduction of CO₂ has attracted considerable attention due to its dual benefits of fossil fuel production and CO₂ pollution reduction. However, CO₂ is a comparatively stable molecule and its photoreduction is thermodynamically and kinetically challenging. Thus, the photocatalytic efficiency of CO₂ reduction is far below the level of industrial applications. Therefore, development of low-cost cocatalysts is crucial for significantly decreasing the activation energy of CO₂ to achieving efficient photocatalytic CO₂ reduction. Herein, we have reported the use of a Ni₂P material that can serve as a robust cocatalyst by cooperating with a photosensitizer for the photoconversion of CO₂. An effective strategy for engineering Ni₂P in an ultrathin layered structure has been proposed to improve the CO₂ adsorption capability and decrease the CO₂ activation energy, resulting in efficient CO₂ reduction. A series of physicochemical characterizations including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM) were used to demonstrate the successful preparation of ultrathin Ni₂P nanosheets. The XRD and XPS results confirm the successful synthesis of Ni₂P from Ni(OH)₂ by a low temperature phosphidation process. According to the TEM images, the prepared Ni₂P nanosheets exhibit a 2D and near-transparent sheet-like structure, suggesting their ultrathin thickness. The AFM images further demonstrated this result and also showed that the height of the Ni₂P nanosheets is ca 1.5 nm. The photoluminescence (PL) spectroscopy results revealed that the Ni₂P material could efficiently promote the separation of the photogenerated electrons and holes in [Ru(bpy)₃]Cl₂·6H₂O. More importantly, the Ni₂P nanosheets could more efficiently promote the charge transfer and charge separation rate of [Ru(bpy)₃]Cl₂·6H₂O compared with the Ni₂P particles. In addition, the electrochemical experiments revealed that the Ni₂P nanosheets, with their high active surface area and charge conductivity, can provide more active centers for CO₂ conversion and accelerate the interfacial reaction dynamics. These results strongly suggest that the Ni₂P nanosheets are a promising material for photocatalytic CO₂ reduction, and can achieve a CO generation rate of 64.8 μmol·h^-1, which is 4.4 times higher than that of the Ni₂P particles. In addition, the XRD and XPS measurements of the used Ni₂P nanosheets after the six cycles of the photocatalytic CO₂ reduction reaction demonstrated their high stability. Overall, this study offers a new function for the 2D transition-metal phosphide catalysts in photocatalytic CO₂ reduction.     

Electrocatalytic CO2 Reduction with a Half‐Sandwich Cobalt Catalyst: Selectivity towards CO

We present herein a Cp*Co(III)‐half‐sandwich catalyst system for electrocatalytic CO₂ reduction in aqueous acetonitrile solution. In addition to an electron‐donating Cp* ligand (Cp*=pentamethylcyclopentadienyl), the catalyst featured a proton‐responsive pyridyl‐benzimidazole‐based N,N‐bidentate ligand. Owing to the presence of a relatively electron‐rich Co center, the reduced Co(I)‐state was made prone to activate the electrophilic carbon center of CO₂. At the same time, the proton‐responsive benzimidazole scaffold was susceptible to facilitate proton‐transfer during the subsequent reduction of CO₂. The above factors rendered the present catalyst active toward producing CO as the major product over the other potential 2e/2H⁺ reduced product HCOOH, in contrast to the only known similar half‐sandwich CpCo(III)‐based CO₂‐reduction catalysts which produced HCOOH selectively. The system exhibited a Faradaic efficiency (FE) of about 70% while the overpotential for CO production was found to be 0.78 V, as determined by controlled‐potential electrolysis.     

氮化铌电催化还原CO2

通过电化学的方法将CO₂转化为CO是解决资源和环境问题的经济友好的策略。在本次工作中,利用湿化学方法制备了铌/碳的前驱体,在NH₃和Ar氛围下煅烧后分别转化为Nb₄N₅/C和Nb₂O₅/C。当氮化温度达到700℃时,制备的Nb₄N₅/C表现出优异的催化活性,在CO₂饱和的0.5 mol·L^-1的NaCl溶液中,电解电位为-0.83V（RHE）时,CO的法拉第效率最高,达到57%。实验结果表明,Nb₄N₅/C的催化活性与Nb₄N₅中的N掺杂有关。