Photoreduction of graphite oxide

The photoreduction of graphite oxide (GO) films and solutions by UV light was studied. The electrical resistance of a GO film decreases upon irradiation by more than an order of magnitude. The threshold of photoreduction was determined to be 3.2 eV. The photoreduction is accompanied by an increase in absorption in the visible spectral region, and the CO, CO₂, O₂, and H₂O molecules were found in the gas phase above the irradiated GO film.     

Simulating the experimental vacuum ultraviolet radiation of rare-gases plasma

Experimental excimer continua emitted by electric discharge plasma of krypton and xenon were interpreted as the ¹ Σ _u ⁺ → ¹ Σ _g ⁺ bound-free transitions. The relative populations of the lower vibrational levels of the ¹ Σ _u ⁺ state were derived fitting experimental spectra with the theoretical ones.     

Photolysis of a fluorinated polymer film by vacuum ultraviolet radiation

We studied the photolysis of a fluoroethylene–fluoropropylene copolymer (FEP) film by vacuum ultraviolet (VUV) radiation from a resonance Xe lamp at a wavelength of 147 nm and air pressures of 0.05 and 2.5 Torr. The chemical changes in the FEP surface layer were investigated by Fourier-transform infrared spectroscopy with attenuated total reflection attachment and X-ray photoelectron spectroscopy. Double bonds were found to be the main product in the case of VUV treatment at 0.05 Torr, while photo-oxidation of FEP occurred predominantly by VUV treatment at 2.5 Torr under formation of the —CF₂C(O)F group. This oxygen-containing group was more effectively formed in the FEP surface layer by VUV photo-oxidation than by conventional surface oxidation techniques such as treatments by plasma and corona discharge and ozone. Storage of the VUV-treated polymers in air at 50% relative humidity resulted in hydrolysis of —CF₂C(O)F to the —CF₂COOH group. Substantial improvement of the film wettability was noticed after VUV photo-oxidation. These findings suggest that VUV irradiation provides a high potential for surface modification of fluorinated polymers which are known to be particularly resistant against functionalization by conventional surface modification techniques such as plasma treatment. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2215–2222, 1998     

Photoionization of epichlorohydrin enantiomers and clusters studied with circularly polarized vacuum ultraviolet radiation

The photoionization of enantiomerically pure epichlorohydrin (C(3)H(5)OCl) has been studied using linearly and circularly polarized vacuum ultraviolet synchrotron radiation. The threshold photoelectron spectrum was recorded and the first three bands assigned using molecular orbital calculations for the expected conformers, although uncertain experimental conformer populations and an anticipated breakdown in Koopmans' theorem leave some ambiguity. Measurements of the photoelectron circular dichroism (PECD) were obtained across a range of photon energies for each of these bands, using electron velocity map imaging to record the angular distributions, during which a record PECD chiral asymmetry factor of 32% was observed. A comparison with calculated PECD curves clarifies the assignment achieved using ionization energies alone and further suggests a likely relative population of the conformers. Threshold photoelectron-photoion coincidence methods were used to study the ionic fragmentation of epichlorohydrin. Fragment ion appearance energies show nonstatistical behavior with clear indications that the cationic epoxide ring is unstable and lower energy decay channels proceeding via ring breaking are generally open. Extensive neutral homochiral clusters of epichlorohydrin may be formed in supersonic molecular beam expansions seeded in Ar. Electron angular distribution measurements made in coincidence with dimer and trimer ions are used to effect an examination of the PECD associated with ionization of size-selected neutral cluster species, and these results differ clearly from PECD of the neutral monomer. The shifted ionization thresholds of the n-mers (n = 2, ..., 7) are shown to follow a simple linear relationship, but under intense beam expansion conditions the monomer deviates from this relationship, and the monomer electron spectra tail to below the expected monomer adiabatic ionization potential (IP). PECD measurements made in coincidence with monomer ions obtained under different beam expansion conditions were used to identify unambiguously a contribution from dissociative photoionization of larger clusters to the monomer parent mass ion yield above and below its adiabatic IP.     

Self-assembly of graphene oxide nanosheets in t-butanol/water medium under gamma-ray radiation

Graphene oxide (GO) nanosheets dispersed in strong acidic t-butanol/water medium can be reduced and self-assembled into a self-standing graphene hydrogel under γ-ray radiation, providing a facile and economical preparation method for hydroxylalkylated graphene-based aerogel.     

A graphite foil electrode covered with electrochemically exfoliated graphene nanosheets

We demonstrate a highly efficient and large area synthesis of 2-D graphene nanosheets on the surface of flexible graphite foils by electrochemical exfoliation of graphite in an effective electrolyte, poly(sodium-4-styrenesulfonate) solution.A constant current of 150 mA/cm was applied to the vertically aligned graphite (anode) and copper (cathode) sheet in the PSS electrolyte solution during a preset time for electrolytic surface exfoliation of the graphite sheet; uniform expansion of the graphite foil was observed. This expanded foil was characterized using scanning electron microscopy, confocal laser scanning microscopy, and high-resolution transmission electron microscopy. Furthermore, we demonstrate the ability of this high surface area foil, covered with uniform graphene, to enable improved electrolyte permeability and Li ion transfer, thereby enhancing electrochemical performance of Li ion battery electrodes.     

Photoionization study of L-valine in the gas phase by vacuum ultraviolet synchrotron radiation

The photoionization and photodissociation of L-valine are studied by tunable synchrotron vacuum ultraviolet photoionization mass spectrometry at the photon energy of 13 eV. The ionization energy of L-valine and the appearance energies of major fragments are measured by the photoionization efficiency spectrum in the photon energy range of 8-11 eV. Possible formation pathways of the major fragments, NH(2)CHC(OH)(2)(+) (m/z=75), NH(2)(CH(3))(2)(CH)(2)(+) (m/z=72) and NH(2)CHCO(+) (m/z=57), are discussed in detail with the theoretical calculations at the B3LYP/6-31++G (d, p) level. Hydrogen migration is considered as the key way for the formation of NH(2)CHC(OH)(2)(+) (m/z=75) and NH(2)CHCO(+) (m/z=57). Furthermore, other fragments, NH(2)CHCOOH(+) (m/z=74), (CH(3))(2)(CH)(2)(+) (m/z=56), C(4)H(7)(+) (m/z=55), NH(2)CHOH(+) (m/z=46), NH(2)CH(2)(+) (m/z=30) and m/z=18, species are also briefly described.     

Growth of zeolite crystals with graphene oxide nanosheets

Growth of silicalite with graphene oxide (GO) nanosheets occurred via attachment of GO onto the silicalite surface, and entrapment of GO nanosheets inside single crystals. Electrically conductive composites were produced by calcination in nitrogen whereas silicalite crystals with slit-like mesopores of sizes 20-25 ? were obtained after GO burn-off.     

Graphene-based multifunctional iron oxide nanosheets with tunable properties

We report the synthesis of graphenes with tunable properties due to the growth of needlelike iron oxide (IO) nanoparticles on their surfaces. The electrical conductivity, flexibility, and magnetic properties of graphene nanosheets (GNSs) could be tuned on demand by fine controlling both the surface coverage and the length of the IO nanoneedles. The degree of coverage of the IO nanoparticles on the surface of the GNSs made it possible to control the resulting properties of the IO/GNSs on demand. As examples of their utility, paperlike materials were generated by simple filtration, and the resulting IO/GNS nanocomposites showed extraordinary removal capacity and fast adsorption rates for As(V) and Cr(VI) ions in water. Another possible application is the preparation of multifunctional films equipped with conductivity, flexibility, and magnetic properties. The fabrication process is easy to scale up at a low cost. In addition, both the colloidal solution and film forms of the resulting IO/GNSs were effective for removal of heavy metal ions, meaning this material could be utilized for actual industrial applications.     

Direct electrochemistry of glucose oxidase and sensing glucose using a screen-printed carbon electrode modified with graphite nanosheets and zinc oxide nanoparticles

We have studied the direct electrochemistry of glucose oxidase (GOx) immobilized on electrochemically fabricated graphite nanosheets (GNs) and zinc oxide nanoparticles (ZnO) that were deposited on a screen printed carbon electrode (SPCE). The GNs/ZnO composite was characterized by using scanning electron microscopy and elemental analysis. The GOx immobilized on the modified electrode shows a well-defined redox couple at a formal potential of −0.4 V. The enhanced direct electrochemistry of GOx (compared to electrodes without ZnO or without GNs) indicates a fast electron transfer at this kind of electrode, with a heterogeneous electron transfer rate constant (K_s) of 3.75 s⁻¹. The fast electron transfer is attributed to the high conductivity and large edge plane defects of GNs and good conductivity of ZnO-NPs. The modified electrode displays a linear response to glucose in concentrations from 0.3 to 4.5 mM, and the sensitivity is 30.07 μA mM⁻¹ cm⁻². The sensor exhibits a high selectivity, good repeatability and reproducibility, and long term stability.

Graphical representation for the fabrication of GNs/ZnO composite modified SPCE and the immobilization of GOx

     

Direct electrochemistry of glucose oxidase and sensing glucose using a screen-printed carbon electrode modified with graphite nanosheets and zinc oxide nanoparticles

We have studied the direct electrochemistry of glucose oxidase (GOx) immobilized on electrochemically fabricated graphite nanosheets (GNs) and zinc oxide nanoparticles (ZnO) that were deposited on a screen printed carbon electrode (SPCE). The GNs/ZnO composite was characterized by using scanning electron microscopy and elemental analysis. The GOx immobilized on the modified electrode shows a well-defined redox couple at a formal potential of ?0.4 V. The enhanced direct electrochemistry of GOx (compared to electrodes without ZnO or without GNs) indicates a fast electron transfer at this kind of electrode, with a heterogeneous electron transfer rate constant (K_s) of 3.75 s^?1. The fast electron transfer is attributed to the high conductivity and large edge plane defects of GNs and good conductivity of ZnO-NPs. The modified electrode displays a linear response to glucose in concentrations from 0.3 to 4.5 mM, and the sensitivity is 30.07 μA mM^?1 cm^?2. The sensor exhibits a high selectivity, good repeatability and reproducibility, and long term stability. Figure

Graphical representation for the fabrication of GNs/ZnO composite modified SPCE and the immobilization of GOx     

Pristine graphite oxide

Graphite oxide (GO) is a lamellar substance with an ambiguous structure due to material complexity. Recently published GO-related studies employ only one out of several existing models to interpret the experimental data. Because the models are different, this leads to confusion in understanding the nature of the observed phenomena. Lessening the structural ambiguity would lead to further developments in functionalization and use of GO. Here, we show that the structure and properties of GO depend significantly on the quenching and purification procedures, rather than, as is commonly thought, on the type of graphite used or oxidation protocol. We introduce a new purification protocol that produces a product that we refer to as pristine GO (pGO) in contrast to the commonly known material that we will refer to as conventional GO (cGO). We explain the differences between pGO and cGO by transformations caused by reaction with water. We produce ultraviolet-visible spectroscopic, Fourier transform infrared spectroscopic, solid-state nuclear magnetic resonance spectroscopic, thermogravimetric, and scanning electron microscopic analytical evidence for the structure of pGO. This work provides a new explanation for the acidity of GO solutions and allows us to add critical details to existing GO models.     

Circular dichroism detection of optically active compounds in gas chromatography using vacuum ultraviolet synchrotron radiation

Circular dichroism has been employed as a detection technique in gas chromatography for specific monitoring of optically active compounds which absorb in the vacuum ultraviolet region. The synchrotron radiation from U9A beamline of National Synchrotron Light Source, Brookhaven National Laboratory, was used as the light source. The detection limit established using this system is at the nanogram level for a selected group of hydrocarbons.     

The vacuum ultraviolet spectrum of bromosilane

The vacuum ultraviolet absorption spectrum of bromisilane in the vapor phase is reported. Assignments are made using photoelectron data and oscillator strengths. The absorptions of this compound are related to absorptions of chlorosilane, methyl bromide and methyl chloride. The results of this work indicate the presence of dπ-pπ (SiBr) delocalizations and concomitant stabilization of halogen nonbonding electrons.     

The vacuum ultraviolet spectrum of stannane

The vacuum UV spectrum of SnH₄ has been recorded up to 110nm (12.26 eV). This spectrum has been interpreted by ab initio calculations (SCF + CI), using a relativistic pseudopotential to describe the core electrons of the tin atom. The spectrum consists of a broad band composed of three maxima (at 8.73, 9.53 and 11.33 eV). The transition below 9.50 eV have been attributed to transitions to diffuse Rydberg states (6s and 6p). The other bands are due essentially to valence transitions.     

Modeling of graphite oxide

Based on density functional calculations, optimized structures of graphite oxide are found for various coverages by oxygen and hydroxyl groups, as well as their ratio corresponding to the minimum of total energy. The model proposed describes well-known experimental results. In particular, it explains why it is so difficult to reduce the graphite oxide up to pure graphene. Evolution of the electronic structure of graphite oxide with the coverage change is investigated.     

PMMA/graphite nanosheets composite and its conducting properties

Graphite nanosheets (NanoG) were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. Nanocomposites of poly(methyl methacrylate) (PMMA) with NanoG were prepared via an in situ polymerization of MMA in the presence of NanoG with the aid of sonication. The nanocomposites were then dispersed with chloroform (CHCl₃) and casted on glass slides to form conducting films. The percolation threshold of PMMA/NanoG conducting films at room temperature was as low as 0.31 vol%, much lower than that of the composites filled with conventional graphite particles. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area diffraction (SAD) and etc. were used to characterize the structure of the graphite nanosheets and the nanocomposites. Results showed that the high-aspect-ratio structure of graphite nanosheets played an important role in forming conducting network in PMMA matrix. The conducting behavior of the composite was interpreted by percolation theory.     

Fragmentation of oligosaccharide ions with 157 nm vacuum ultraviolet light

The 157 nm photofragmentation of native and derivatized oligosaccharides was studied in a linear ion trap and in a home-built matrix-assisted laser desorption/ionization (MALDI) tandem time-of-flight (TOF/TOF) mass spectrometer, and the results were compared with collision-induced dissociation (CID) experiments. Photodissociation produces product ions corresponding to high-energy fragmentation pathways; for cation-derivatized oligosaccharides, it yields strong cross-ring fragment ions and provides better sequence coverage than low- and high-energy CID experiments. On the other hand, for native oligosaccharides, CID yielded somewhat better sequence coverage than photodissociation. The ion trap enables CID hybrid MS3 experiments on the high-energy fragment ions obtained from photodissociation.     

Intercalation and stitching of graphite oxide with diaminoalkanes

The intercalation reaction of graphite oxide with diaminoalkanes, with the general formula H2N(CH2)nNH2 (n = 4-10), was studied as a method for synthesizing pillared graphite with tailored interlayer spacing. Interlayer spacings from 0.8 to 1.0 nm were tailored by varying the size of the intercalant from (CH2)4 to (CH2)10. X-ray diffraction and infrared spectroscopy were used to confirm intercalation, and the frequency of the CH2 stretch confirmed that the intercalants are in a disordered state, with an important contribution from the gauche conformer. Sequential intercalation of diaminoalkanes followed by dodecylamine demonstrated the inability of these "stitched" systems to undergo expansion along the c-direction, indicative of cross-linking. Finally, the reaction of graphite oxide with diaminoalkanes under reflux and for extended periods (>72 h) resulted in the chemical reduction of the graphite oxide to a disordered graphitic structure.