Dielectric and polar order behaviors of BaTiO<Subscript>3</Subscript>-Bi(Mg<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics

New perovskite solid solution ceramics of (1−x)BaTiO₃-xBi(Mg_1/2Ti_1/2)O₃ ((1−x)BT-xBMT, x≤0.09) were synthesized by the solid-state reaction technique. X-ray diffraction studies have revealed a stable single perovskite structure for all samples. Dielectric measurements were carried out at different frequencies and temperatures. The polarization evolutions with temperatures were measured to investigate the ferroelectric properties. All the compositions show features of ferroelectrics with diffuse phase transition, though the temperature T _m of their dielectric constant maximum ε _m is frequency dependent. The dielectric constant peak ε(T) of (1−x)BT-xBMT ceramics become broad with increasing BMT content. During the temperature range of ε(T) peak summit, (1−x)BT-xBMT ceramics present quasi-linear dielectric phenomenon under high electric field with very high dielectric constant.     

Formation of ceramic solid solutions in a SrTiO<Subscript>3</Subscript>-BiScO<Subscript>3</Subscript> system

X-ray structural, X-ray phase, and dilatometric analyses were used to explore specific features of the formation of solid solutions in the (1 − x)SrTiO₃−xBiScO₃ system with x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5. It was found that the synthesis of solid solutions from the initial Bi₂O₃, Sc₂O₃, TiO₂, and SrCO₃ components is accompanied by a considerable increase in the linear dimensions of the samples, depending on their composition. Solid solutions with x > 0.1 are formed through intermediate phases (Sr₅Bi₆O₁₄ at x = 0.2; Sr_0.78Bi_2.22O₄ at x = 0.3; and Sr_2.25Bi_6.75O_12.38 at x = 0.4 and 0.5). It was shown that the samples with x = 0.2, 0.3, 0.4, and 0.5 have two phases: one with a cubic Pm3m structure and one with a tetragonal I4/mcm structure.     

Conditions favoring the polar weak ferromagnetic state in BiFeO<Subscript>3</Subscript>-type multiferroics

The crystal structure and magnetic properties of Bi_{1 − x} A _x FeO_{3 − x/2} (A = Ca, Sr, Pb, Ba), Bi_{1 − x} A _x (Fe_{1 − x} Ti _x )O₃, and Bi_{1 − x} A _x (Fe_{1 − x/2}Nb _x/2)O₃ solid solutions have been studied. It is shown that the homogeneous polar weak ferromagnetic state occurs in the vicinity of a morphotropic phase boundary in the systems where dopant ions lead to the reduction of the unit cell volume in the polar phase. In the case of A = Ca, the non-polar phase also exhibits weak ferromagnetism and the spontaneous magnetizations in the polar and nonpolar phases differ only slightly.     

Phase transition and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)(Nb<Subscript>1-x</Subscript>Ta<Subscript>x</Subscript>)O<Subscript>3</Subscript> lead-free piezoelectric ceramics

(K_0.5Na_0.5)(Nb_1-xTa_x)O₃ lead-free piezoelectric ceramics have been prepared by an ordinary sintering technique. The results of X-ray diffraction reveal that Ta⁵⁺ diffuses into the K_0.5Na_0.5NbO₃ lattices to form a solid solution with an orthorhombic perovskite structure. Because of the high melting temperature of KTaO₃, the (K_0.5Na_0.5)(Nb_1-xTa_x)O₃ ceramics can be sintered at higher temperatures. The partial substitution of Ta⁵⁺ for the B-site ion Nb⁵⁺ decreases both paraelectric/cubic–ferroelectric/tetragonal and ferroelectric/tetragonal–ferroelectric/orthorhombic phase transition temperatures, T_C and T_O-T. It also induces a relaxor phase transition and weakens the ferroelectricity of the ceramics. The ceramics become ‘softened’, leading to improvements in d₃₃, k_p, k_t and ε_r and a decease in E_c, Q_m and N_p. The ceramics with x=0.075–0.15 become optimum, having d₃₃=127–151 pC/N, k_p=0.43–0.44, k_t=0.43–0.44, ε_r=541–712, tanδ=1.75–2.48% and T_C=378–329 °C. PACS 77.65.-j; 77.84.Dy; 77.84.-s     

Thermal stability and electrical conductivity of multiferroics BiFeO<Subscript>3</Subscript>/REEs

Ceramic samples of bismuth ferrite and solid solutions of Bi_{1 − x} A _x FeO₃ type (where A = Lu, Yb, Tm, Er, Ho, Dy, Tb, Gb, Eu, Sm, Nd, Pr, La; 0.05 ≤ x ≤ 0.20; Δx = 0.05) were prepared. Spectra of the real part of electrical conductivity were studied within the range 10⁻⁴–10⁻⁶ Hz. The dependence of the samples’ thermal stability and electrical conductivity on the size of the substituting ions was established.     

Photoluminescence of nanoparticles of (Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>)<Subscript>0.95</Subscript>(Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>0.05</Subscript> solid solution

We have ground bulk samples to obtain nanoparticles of (Ga₂S₃)_1–x (Eu₂O₃) _x solid solutions, the sizes of which were determined using an atomic force microscope. The photoluminescence spectra of the nanoparticles were studied in the temperature interval 77–300 K. We have established the mechanisms for emission and transfer of energy from the matrix to the rare-earth ion, and we determined the Stokes shift (ΔS = 0.7 eV), the Huang–Rhys parameter (S = 16), and the optical phonon energy (ħ−ω = 23 meV).     

Suppression of ferroelectricity and quantum fluctuations in Ru-doped TbMnO<Subscript>3</Subscript>

We investigate the effects of Ru-doping in polycrystalline TbMn_1−x Ru _x O₃ (x≤0.10) on the multiferroicity. It is observed that the Ru substitution gradually melts away the dielectric anomaly at the ferroelectric transition point and the ferroelectricity by suppressing the polarization, accompanied with a surprising low-temperature dielectric plateau. While it is reasonable to observe the significant suppression of ferroelectricity, owing to the fact that the Ru-doping disrupts the Mn spiral spin ordering and reduces the Mn–Mn spin angle, quantum fluctuations associated with the Ru substitution, responsible for the low-temperature dielectric plateau, seems to be significant.     

Microstructure,dielectric and piezoelectric properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript>-Ba(Ti<Subscript>0.95</Subscript>Zr<Subscript>0.05</Subscript>)O<Subscript>3</Subscript> lead-free ceramics with CuO sintering aid

Using an ordinary ceramic fabrication technique, we fabricated lead-free (1-x)(K_0.5Na_0.5)NbO₃-xBa(Ti_0.95Zr_0.05)O₃ ceramics with CuO sintering aid . Ba(Ti_0.95Zr_0.05)O₃ diffuses into (K_0.5Na_0.5)NbO₃ to form a new solid solution. The ceramics with perovskite structure possess orthorhombic phase at x≤0.04 and become tetragonal phase at x≥0.06. Both the paraelectric cubic–ferroelectric tetragonal and the ferroelectric tetragonal–ferroelectric orthorhombic phase transition temperatures decrease with increasing the concentration of Ba(Ti_0.95Zr_0.05)O₃. The doping of CuO effectively promotes the densification of the ceramics. The coexistence of the orthorhombic and tetragonal phases at 0.04<x<0.06 and the improvement in sintering performances of the ceramics significantly enhance the piezoelectric and dielectric properties at room temperature. The ceramics with x=0.04–0.06 and y=0.75–1.50 possess excellent properties: d₃₃=119–185 pC/N, k_P=37–44%, k_t=35–49%, ε=341–1129, cosδ=0.7–4.4% and T_c=312–346 °C. PACS 77.65.-j; 77.84.Dy; 77.84.-s     

Effect of Ba-substitution on the structure and properties of Pb<Subscript>0.8</Subscript>Ba<Subscript>0.2</Subscript>[(In<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>)<Subscript>1-x</Subscript>Ti<Subscript>x</Subscript>]O<Subscript>3</Subscript> ceramics

Ferroelectric ceramics with formula Pb_0.8Ba_0.2[(In_1/2Nb_1/2)_1-xTi_x]O₃ (PBINT) (x=0.0,0.1,0.2,0.3,0.4 and 0.5) were prepared via a two-step solid state reaction method. It was found that ceramics with compositions in the range of x=0.0∼0.3 showed a pseudo-cubic structure, whereas the ceramic with x=0.5 displayed a tetragonal structure. All compositions showed significant frequency dispersion in their dielectric properties. The remanent polarization P_r as well as the coercive field E_c, measured at room temperature, increases with the Ti content. The experimental results obtained in this system are summarized into a phase diagram, with the morphotropic phase boundary (MPB) located at x=0.4. Compared with the Pb[(In_1/2Nb_1/2)_1-xTi_x]O₃ solid solution system, incorporating Ba in the A-site leads to a significant decrease in the dielectric maximum temperature T_max, a suppression of the dielectric relaxation parameter γ, and a shift of the MPB composition to a higher Ti content. PACS 77.84.Dy; 77.80.Bh; 77.22.Ch     

Influence of the misfit of the crystal chemical parameters of Na and Li cations on the dielectric properties of NaNbO<Subscript>3</Subscript>-LiNbO<Subscript>3</Subscript> solid solutions

It is established that the Curie-Weiss temperature of Na_{1 − x} Li _x NbO₃ solid solutions determined by extrapolation of linear portions of the temperature dependence of the reciprocal of the permittivity ɛ⁻¹ from the cubic phase sharply increases with x, although the temperature of the ɛ(T) maximum decreases. It is shown in terms of a simple theoretical model that the experimentally observed change in the dielectric properties of Na_{1 − x} Li _x NbO₃ is well explained under the assumption of formation of a dipole system due to the displacement of Li cations from the center of the cubooctahedral cavity because of the significant steric misfit between the Na and Li cations.     

Fundamental band edge optical absorption in Bi<Subscript>0.5</Subscript>Sb<Subscript>1.5</Subscript>Te<Subscript>3</Subscript>

Spectra of optical absorption in Bi_0.5Sb_1.5Te₃ films grown on mica and KBr substrates have been investigated for T = 145 and 300 K. The data obtained have been analyzed together with the data of investigations on the fundamental absorption edge for Bi₂Te₃ available in the scientific literature. It has been revealed that the interband absorption spectra for both Bi_0.5Sb_1.5Te₃ and Bi₂Te₃ represent a superposition of two components corresponding to direct and indirect allowed optical transitions. In this case, the least energy gap separating the valence band and the conduction band is direct for Bi_2−xSb_xTe₃ (x ≤ 1.5, T = 300 K). For Bi_0.5Sb_1.5Te₃ the temperature variation rates have been estimated for the thresholds of direct and indirect interband transitions. It has been shown that this solid solution is direct gap solution at T ≥ 145 K. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 50–52, July, 2008.     

Specific features of structural states in the BiFeO<Subscript>3</Subscript>-YMnO<Subscript>3</Subscript> solid solutions

The (1 − x)BiFeO_3−x YMnO₃ solid solutions have been found to undergo the following sequence of phase transformations with increasing x: R3c → Pbnm → C2 → Pnma → P6₃ cm. It has been established that the Pbnm and Pnma phases have different orientations of atomic displacements and can exhibit antiferroelectric properties.     

Ferroelectric phase transition of Nb-doped Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics

Bi_3.25La_0.75Ti_3-yNb_yO₁₂ (y=0.0, 0.03, 0.09, 0.15, 0.21) were synthesized using the solid-state reaction method. The effects of Nb doping on ferroelectric properties were studied through dielectric and P-E measurements. The value of P_r increases with increasing Nb content. Bi_3.25La_0.75Ti_3-yNb_yO₁₂ ceramics exhibit a maximum remanent polarization of P_r=27 μC/cm² at an Nb content of y=0.09. These results indicate that Nb doping can improve the ferroelectric properties of BLT ceramics. The Curie temperature, T_c, decreased with increasing Nb-content, and the ferroelectric phase transition of BLTNy is a second-order transition without thermal hysteresis. PACS 77.55.+f; 77.80.-e; 77.22.Jp     

NMR study and electrical properties investigation of Zn<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>

The α-Zn₂P₂O₇ compound was obtained by conventional solid-state reaction. The sample was characterized by X-ray powder diffraction, solid state ³¹P NMR MAS, and electrical impedance spectroscopy. The solid state ³¹P MAS NMR, performed at 121.49 MHz, shows three isotropic resonances at −21.1, −18.8, and −15.8 ppm, confirming the non-equivalency of the three PO₄ groups in the α-Zn₂P₂O₇ form. They are characterized by different chemical shift tensor parameters with the local geometrical features of the tetrahedra. Electrical impedance measurements of β-Zn₂P₂O₇, form stable for temperature greater than 403 K, were performed as a function of both temperature and frequency. The electrical conduction and dielectric relaxation have been studied. The AC conductivity obeys the universal power law. The approximation type correlated barrier hopping model explains the universal behavior of the n exponent. The impedance plane plot shows semicircle arcs at different temperatures, and an electrical equivalent circuit has been proposed to explain the impedance results. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The simulated spectra show a good correlation with the experimental data.     

Manganese doping effects on interband electronic transitions,lattice vibrations,and dielectric functions of perovskite-type Ba<Subscript>0.4</Subscript>Sr<Subscript>0.6</Subscript>TiO<Subscript>3</Subscript> ferroelectric ceramics

The Ba_0.4Sr_0.6−x Mn _x TiO₃ (BSMT) ceramics with different Mn composition (from 1% to 10%) have been prepared via the conventional solid-state reaction sintering. The X-ray diffraction analysis shows that the ceramics are polycrystalline with the single perovskite phase. The lattice vibrations and optical properties have been investigated using Raman scattering, spectroscopic ellipsometry (SE), and infrared reflectance spectra. It was found that the optical bandgap for the BSMT ceramics is varied between 3.40 and 3.65 eV. The three first-order Raman-active phonon modes can be observed, and the frequency of the A ₁(LO₃)/E(LO) mode shows a blue shift of 8 cm⁻¹ with the Mn composition, which can be attributed to the distortion of the TiO₆ octahedron. With increasing Mn composition, the frequency of the infrared-active TO₄ mode decreases from 532 to 520 cm⁻¹, owing to the local variation of the lattice constant induced by the Mn incorporation. Moreover, the optical functions of the ceramics from the far-infrared to ultraviolet region are obtained based on the SE and reflectance spectra, which is useful for the potential applications in ferroelectric-based optoelectronic devices.     

Spectral-luminescent investigations of glasses and glass-ceramic materials in Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Glasses of 2Bi₂O₃-3GeO₂-xFe₂O₃ composition, where x = 0–1.5, are obtained under oxidizing and reducing conditions. Glass-ceramic materials are produced by the thermal treatment of the glasses, the properties of which, as well as those of the original glasses, are studied by the methods of X-ray phase analysis and optical and luminescent spectroscopy. It is found that the Fe³⁺/Fe²⁺ ion ratio in the samples changes depending on the synthesis conditions of the original glasses and crystallization process.     

<Superscript>29</Superscript>Si MAS-NMR study of oxide conductors derived from the apatite-type La<Subscript>9.33</Subscript>Si<Subscript>6</Subscript>O<Subscript>26</Subscript> compound

The preparation of (La_9.33−2x/3Sr _x □_0.67−x/3)Si₆O₂₄O₂ (0 ≤ x ≤ 2) samples with different amounts of cation vacancies is reported. Structure and unit-cell parameters were deduced by Rietveld analysis of XRD patterns. Structural features that enhance oxygen conductivity in Sr-doped apatites are discussed. Up to three components were detected in ²⁹Si MAS-NMR spectra which change with the amount and distribution of cation vacancies. In general, oxygen conductivity increases with the amount of vacancies at La1 (6h) sites, passing through a maximum for x = 0.4. In the case of activation energy, a minimum is detected near x = 1.2, indicating that entropic and enthalpic change in different ways. The presence of cation vacancies should enhance oxygen hopping along c-axis; however, the analysis of the frequency dependence of conductivity suggests that oxygen motions are produced along three axes.     

DO<Subscript>3</Subscript>-type cubic structure of nonstoichiometric vanadium monoxide

An X-ray diffraction study indicates that nonstoichiometric vanadium monoxide VO _y ≡ V _x O _z (y = z/x) has a cubic structure of the DO₃ type (space group Fm $ \bar 3 $ \bar 3 m), where vanadium atoms are not only at the 4(a) sites of the metal fcc sublattice, but also at the tetrahedral 8(c) sites. This circumstance fundamentally distinguishes monoxide VO _y from strongly nonstoichiometric MX _y compounds with the B1 structure and the same space group, where atoms M and X and structural vacancies ▪ and ▭ of the metal and nonmetal sublattices, respectively, are distributed over the 4(a) and 4(b) sites. The dependence of the filling factor q of the tetrahedral interstices by vanadium atoms on the relative content y of oxygen in VO _y has been obtained. It has been shown that the composition of cubic vanadium monoxide should be represented as VO _y ≡ V _x O _z ≡ V _{x − 2q} V_2q ^(t)▪_{1 − x + 2q} O _z ▭_{1 − z} , taking into account the structure.     

Anisotropy of amorphous nanogranular composites CoNbTa-SiO<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> and CoFeB-SiO<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A comparative investigation of the magnetic properties of amorphous nanogranular composites (Co₄₁Fe₃₉B₂₀) _x (SiO _n )_{100 − x} and (Co₈₆Nb₁₂Ta₂) _x (SiO _n )_{100 − x} has been performed in the subpercolation region at temperatures in the range 4.2–300 K. The thermomagnetic dependences in the range 4.2–300 K and the processes of magnetization reversal and remanent magnetization relaxation at liquid-helium temperatures have been studied. It has been established that the average anisotropy constants of amorphous nanograins are equal to 3.6–7.0 kJ/m³ for the (Co₄₁Fe₃₉B₂₀) _x (SiO _n )_{100 − x} composites and 5–8 kJ/m³ for the (Co₈₆Nb₁₂Ta₂) _x (SiO _n )_{100 − x} composites. The fundamental differences in the concentration dependences of the anisotropy constant K _eff and the coercive force H _C have been revealed for the two systems under investigation. It has been demonstrated that, as the concentration of the metal phase increases, the quantities K _eff and H _C increase for the (Co₈₆Nb₁₂Ta₂) _x (SiO _n )_{100 − x} composites and decrease for the (Co₄₁Fe₃₉B₂₀) _x (SiO _n )_{100 − x} composites.     

Ferroelectric and dielectric properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> thin films grown on Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> film layer

Ferroelectric and dielectric properties of bilayered ferroelectric thin films, SrBi₄Ti₄O₁₅ grown on Bi₄Ti₃O₁₂, were investigated. The thin films were annealed at 700°C under oxygen atmosphere. The bilayered thin films were prepared on a Pt(111)/Ti/SiO₂/Si substrate by a chemical solution deposition method. The dielectric constant and dielectric loss of the bilayered thin films were 645 and 0.09, respectively, at 100 kHz. The value of remnant polarization (2P _r) measured from the ferroelectric thin film capacitors was 60.5 μC/cm² at electric field of 200 kV/cm. The remnant polarization was reduced by 22% of the initial value after 10¹⁰ switching cycles. The results showed that the ferroelectric and dielectric properties of the SrBi₄Ti₄O₁₅ on Bi₄Ti₃O₁₂ ferroelectric thin films were better than those of the SrBi₄Ti₄O₁₅ grown on a Pt-coated Si substrate suggesting that the improved properties may be due to the different nucleation and growth kinetics of SrBi₄Ti₄O₁₅ on the c-axis-oriented Bi₄Ti₃O₁₂ layer or on the Pt-coated Si substrate.