Phase equilibrium properties of binary aqueous solutions of benzylamine, 1,2-bis(2-aminoethoxy)ethane,or 2-[2-(dimethylamino)ethoxy]ethanol

The vapour pressures of (benzylamine + water), {1,2-bis(2-aminoethoxy)ethane + water}, or {2-[2-(dimethylamino)ethoxy]ethanol + water} binary mixtures, and pure 2-[2-(dimethylamino)ethoxy]ethanol component were measured by means of two static devices at temperatures between (283.15 and 363.15 (or 323.15)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (benzylamine + water) binary mixture exhibits positive deviations in G^E for (303.15 < T/K < 323.15) and a sinusoidal shape in G^E for T > 323.15 K over the whole composition range. The aqueous 1,2-bis(2-aminoethoxy)ethane or {2-[2-(dimethylamino)ethoxy]ethanol + water} solutions exhibit negative deviations in G^E for all investigated temperatures over the whole composition range.     

Excess enthalpies and excess heat capacities of binary mixtures of (cyclohexanone,or 2-butanone,or 1,4-dioxane + 1,2-dimethoxyethane) and (1,4-dioxane + 1,2-dimethoxyethane) atT = 298.15 K

Excess enthalpies and excess heat capacities of { x 2-butanone  +  (1  − x)1,4-dioxane}, and { x cyclohexanone, or 2-butanone, or 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were measured atT =  298.15 K. Excess enthalpies were negative for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane}, and negative with a small positive part in the region ofx >  0.8 for { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, whereas excess enthalpies of { x 2-butanone  +  (1  − x)1,4-dioxane} were positive as for { x cyclohexanone  +  (1  − x)1,4-dioxane} previously reported. Excess enthalpies of {x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were positive. The results were compared with the systems reported earlier. Excess heat capacities are positive for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane} and { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, and negative for { x 2-butanone  +  (1  − x)1,4-dioxane} and { x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane}. The last mixture shows a W-shaped curve of excess heat capacity.     

Phase equilibrium properties of binary mixtures containing 1,3-pentanediamine (or 1,5-diamino-2-methylpentane) and water at several temperatures

The vapor pressures of (1,3-pentanediamine + water), or (1,5-diamino-2-methylpentane + water) binary mixtures, and of pure 1,3-pentanediamine or 1,5-diamino-2-methylpentane components were measured by means of a static device at temperatures between (273 and 363) K. The data were correlated with the Antoine equation. From these data excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a three order Redlich–Kister equation using the Barker’s method. The (1,3-pentanediamine + water) or (1,5-diamino-2-methylpentane + water) binary systems exhibit negative deviations in G^E for all investigated temperatures over the whole composition. Additionally, the NRTL UNIQUAC and Modified UNIFAC (Do) models have been used for the correlation or prediction of the total pressure.     

Investigation of the isothermal (vapour + liquid) equilibria of aqueous 2-amino-2-methyl-1-propanol (AMP), N-benzylethanolamine,or 3-dimethylamino-1-propanol solutions at several temperatures

The vapour pressures of (2-amino-2-methyl-1-propanol (AMP) + water), (N-benzylethanolamine + water), or (3-dimethylamino-1-propanol + water) binary mixtures, and of pure AMP and 3-dimethylamino-1-propanol components were measured by means of two static devices at temperatures between 283 K and 363 K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The {2-amino-2-methyl-1-propanol (AMP) + water} binary mixture exhibits negative deviations in G^E (at T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range. For the aqueous N-benzylethanolamine solution, a S shape is observed for the G^E for all investigated temperatures over the whole composition range. The (3-dimethylamino-1-propanol + water) binary mixture exhibits negative deviations in G^E (at T < 293.15 K), positive deviations in G^E (for 293.15 K < T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range.     

Excess enthalpies and excess volumes of (2-methoxyethanol + 1,4-dioxane) and (1,2-dimethoxyethane + benzene) at temperatures between 283.15 K and 313.15 K

The measurement of excess enthalpies, H^E, at T=298.15 K and densities at temperatures between 283.15 K and 313.15 K are reported for the (2-methoxyethanol + 1,4-dioxane) and (1,2-dimethoxyethane + benzene) systems. The values of H^E and the excess volumes, V^E, are positive, and the temperature dependence of V^E is quite small for (2-methoxyethanol + 1,4-dioxane). The (1,2-dimethoxyethane + benzene) system shows a negative H^E and sigmoid curves in V^E, which change sign from positive to negative with an increase in 1,2-dimethoxyethane. The temperature dependence of V^E for this system is negative.     

Isothermal (vapour + liquid) equilibria and excess Gibbs free energies in some binary (cyclopentanone + chloroalkane) mixtures at temperatures from 298.15 K to 318.15 K

The vapour pressures of binary (cyclopentanone + 1-chlorobutane, +1,3-dichloropropane, and +1,4-dichlorobutane) mixtures, were measured at the temperatures of (298.15, 308.15, and 318.15) K. The vapour pressures vs. liquid phase composition data have been used to calculate the excess molar Gibbs free energies G^E of the investigated systems, using Barker’s method. Redlich–Kister, Wilson and NRTL equations, taking into account the vapor phase imperfection in terms of the second virial coefficient, have represented the G^E values. No significant difference between G^E values obtained with these equations has been observed.     

Excess molar enthalpies of binary systems containing 2-octanone,hexanoic acid,or octanoic acid at T = 298.15 K

An isothermal titration calorimeter was used to measure the excess molar enthalpies (H^E) of six binary systems at T = 298.15 K under atmospheric pressure. The systems investigated include (1-hexanol + 2-octanone), (1-octanol + 2-octanone), (1-hexanol + octanoic acid), (1-hexanol + hexanoic acid), {N,N-dimethylformamide (DMF) + hexanoic acid}, and {dimethyl sulfoxide (DMSO) + hexanoic acid}. The values of excess molar enthalpies are all positive except for the DMSO- and the DMF-containing systems. In the 1-hexanol with hexanoic acid or octanoic acid systems, the maximum values of H^E are located around the mole fraction of 0.4 of 1-hexanol, but the H^E vary nearly symmetrically with composition for other four systems. In addition to the modified Redlich–Kister and the NRTL models, the Peng–Robinson (PR) and the Patel–Teja (PT) equations of state were used to correlate the excess molar enthalpy data. The modified Redlich–Kister equation correlates the H^E data to within about experimental uncertainty. The calculated results from the PR and the PT are comparable. It is indicated that the overall average absolute relative deviations (AARD) of the excess enthalpy calculations are reduced from 18.8% and 18.8% to 6.6% and 7.0%, respectively, as the second adjustable binary interaction parameter, k_bij, is added in the PR and the PT equations. Also, the NRTL model correlates the H^E data to an overall AARD of 10.8% by using two adjustable model parameters.     

Excess molar enthalpies and excess molar volumes of (1,3-dimethyl-2-imidazolidinone + an aromatic hydrocarbon) atT = 298.15 K

Excess molar enthalpies H_m^Eand excess molar volumesV_m^E of (1,3-dimethyl-2-imidazolidinone  +  benzene, or methylbenzene, or 1,2-dimethylbenzene, or 1,3-dimethylbenzene, or 1,4-dimethylbenzene, or 1,3,5-trimethylbenzene, or ethylbenzene) over the whole range of compositions have been measured at T =  298.15 K. The excess molar enthalpy values were positive for five of the seven systems studied and the excess molar volume values were negative for six of the seven systems studied. The excess enthalpy ranged from a maximum of 435 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  1,3,5-trimethylbenzene) to a minimum of  − 308 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  benzene). The excess molar volume values ranged from a maximum of 0.95cm³mol ^− 1 for (1,3-dimethyl-2-imidazoline  +  ethylbenzene) and a minimum of  − 1.41 cm³mol ^− 1for (1,3-dimethyl-2-imidazoline  +  methylbenzene). The Redlich–Kister polynomial was used to correlate both the excess molar enthalpy and the excess molar volume data and the NRTL and UNIQUAC models were used to correlate the enthalpy of mixing data. The NRTL equation was found to be more suitable than the UNIQUAC equation for these systems. The results are discussed in terms of the polarizability of the aromatic compound and the effect of methyl substituents on the benzene ring.     

Excess properties and vapour pressure of {3-diethylaminopropylamine + cyclohexane}

The vapour pressures of liquid {3-diethylaminopropylamine (3-DEPA) + cyclohexane} were measured by a static method between T = (273.15 and 363.15) K at 10 K intervals. The excess molar volumes V^E at 298.15 K and excess molar enthalpies H^E at 303.15 K were also measured. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using DISQUAC model, were evaluated     

Aqueous solutions of tris(1,2-diaminoethane)cobalt(III) chloride and tris(1,3-diaminopropane)cobalt(III) chloride atT = 278.15 K. Enthalpy of dilution

The enthalpies of dilution of aqueous solutions of {Co(en)₃}Cl₃and {Co(tn)₃}Cl₃(where en =  1,2-diaminoethane andtn =  1,3-diaminopropane) have been measured up to m =  1 mol · kg ^− 1at T =  278.15 K and atmospheric pressure with an isoperibol calorimeter by the long-jump method. Relative apparent molar enthalpies L_φ,mhave been extracted from an empirical polynomial of the molality square root. Previously reported data at T =  298.15 K are compared with the new experimental dilution results. A noticeable decrease in L_φ,mwas observed at every experimental concentration when temperature diminished from 298.15 K to 278.15 K. An inversion in the relative layout for the L_φ,mcurves of aqueous {Co(en)₃}Cl₃and {Co(tn)₃}Cl₃was also found.     

Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)

The vapour pressures of liquid (3-diethylaminopropylamine (3-DEPA) + n-heptane) mixtures were measured by a static method between T = (303.15 and 343.15) K at 10 K intervals. The molar excess enthalpies H^E at T = 303.15 K were measured for the systems {3-DEPA + C_nH_2n+2 (n = 6, 7, 12)}. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using group contribution UNIFAC (Gmehling version) model, were evaluated.     

(Vapour + liquid) equilibria and excess molar enthalpies for mixtures with strong complex formation. Trichloromethane or 1-bromo-1-chloro-2,2,2-trifluoroethane (halothane) with tetrahydropyran or piperidine

Isothermal (vapour  +  liquid) equilibria were measured for (trichloromethane  +  tetrahydropyran or piperidine) at T =  333.15 K and {1-bromo-1-chloro-2,2,2-trifluoroethane (halothane)  +  tetrahydropyran or piperidine} atT =  323.15 K with a circulation still. The results were verified by effective statistical procedures and used to calculate activity coefficients and excess molar Gibbs free energiesG_m^E . Excess molar enthalpiesH_m^E for these mixtures were determined at T =  298.15 K by means of an isothermal CSC microcalorimeter equipped with recently reconstructed flow mixing cells. Reliable performance of the calorimetric setup was proved by the good agreement of H_m^Efor (hexane  +  cyclohexane), (2-propanone  +  water), and (methanol  +  water), with the best literature results. The trichloromethane- or halothane-containing mixtures exhibit strong negative deviations from Raoult’s law and are highly exothermic, thus indicating that complex formation via hydrogen bonding is a governing nonideality effect. A close similarity in the behaviour of corresponding mixtures with trichloromethane and halothane is observed, but for halothane-containing mixtures,G_m^E and H_m^Eare consistently more negative, confirming that halothane is a more powerful proton donor than chloroform.     

Measurement of densities and excess molar volumes for (1,2-propanediol,or 1,2-butanediol + water) at the temperatures (288.15, 298.15, and 308.15) K and at the pressures (0.1, 20, 40, and 60) MPa

Excess molar volumes V_m^Eof (1,2-propanediol  +  water) and (1,2-butanediol  +  water) were measured at temperatures of (288.15, 298.15, and 308.15) K and at pressures of (0.1, 20, 40, and 60) MPa with a densimeter, model DMA 512p from Anton Paar. Values of V_m^Ewere negative for all the mixtures studied over the whole concentration range and for all temperatures and pressures. Results were correlated by polynomial equations of Redlich and Kister and of Myers and Scott.     

Experimental determination of the isothermal (vapour + liquid) equilibria of binary aqueous solutions of sec-butylamine and cyclohexylamine at several temperatures

The vapour pressures of (sec-butylamine + water), (cyclohexylamine + water) binary mixtures, and of pure sec-butylamine and cyclohexylamine components were measured by means of two static devices at temperatures between 293 (or 273) K and 363 K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (cyclohexylamine + water) system shows positive azeotropic behaviour for all investigated temperatures. The two binary mixtures exhibit positive deviations in G^E for all investigated temperatures over the whole composition range.     

(Vapor-liquid) equilibria and excess Gibbs free energy functions of (ethanol + glycerol), or (water + glycerol) binary mixtures at several temperatures

The vapor pressures of (ethanol + glycerol) and (water + glycerol) binary mixtures were measured by means of two static devices at temperatures between (273 and 353 (or 363)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs free energy functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker method. The (ethanol + glycerol) binary system exhibits positive deviations in G^E where for the (water + glycerol) mixture, the G^E is negative for all temperatures investigated over the whole composition. Additionally, the NRTL, UNIQUAC and Modified UNIFAC (Do) models have been used for the correlation or prediction of the total pressure.     

(Vapour + liquid) equilibria and excess Gibbs free energies of (cyclohexanone + 1-chlorobutane and + 1,1,1-trichloroethane) binary mixtures at temperatures from (298.15 to 318.15) K

The vapour pressures of binary (cyclohexanone + 1-chlorobutane, + 1,1,1-trichloroethane) mixtures were measured at the temperatures of (298.15, 308.15, and 318.15) K. The vapour pressures vs. liquid phase composition data have been used to calculate the excess molar Gibbs free energies G^E of the investigated systems, using Barker’s method. Redlich–Kister, Wilson, UNIQUAC, and NRTL equations, taking into account the vapour phase imperfection in terms of the 2-nd virial coefficient, have represented the G^E values. No significant difference between G^E values obtained with these equations has been observed.     

Thermodynamics of the cell Pt | H2(p)| HCl (m)| AgCl| Ag and primary medium effects upon HCl in (glycerol + water) solvents

The electromotive force (e.m.f.)E of the cellPt|H₂(p)|HCl(m) in Z|AgCl|Ag in {glycerol (G)  +  water (W)} solvents, Z  =  (G  +  W), up to glycerol mass fraction w_G =  0.7 has been measured within the temperature range from 273.15 K to 313.15 K at HCl molalities up to 0.1mol · kg ^− 1. On this basis, the standard molar e.m.f. E_m ^∘ values pertaining to such solvent mixtures have been obtained, and have been combined with sparse literature data for optimization. At glycerol mass fractions up tow_G ≈  0.5, at constant temperature,E_m ^∘  shows a linear dependence on the glycerol mole fractionx_G and, in parallel, E_c ^∘ (on the amount-of-substance concentration scale) shows linear dependence on the glycerol volume fractionϕ_G . The primary medium effect upon HCl, defined as the difference (E_c ^∘ )_W −  (E_c ^∘ )_Z, has been considered as a function of the water volume fraction ϕ_Win terms of Feakins and French’s theory: this would lead to a primary hydration number n(hydr)  =  2.4 for HCl, in good agreement with previous results obtained with solvents other than (glycerol  +  water). In this connection, some basic methodological aspects are discussed. Ancillary values of the densities ρ_Zof the relevant solvent mixtures, which were hitherto unavailable and are necessary for the data processing leading toE_m ^∘  , have also been measured.     

Viscosity of (ethane-1,2-diol + 1,2-dimethoxyethane + water) at temperatures from 263.15 K to 353.15 K

The kinematic viscosity ν for (ethane-1,2-diol  +  1,2-dimethoxyethane  +  water) was measured at 14 different ternary compositions covering the whole miscibility field, and at 19 temperatures in the range 263.15 ⩽T /  K ⩽ 353.15. The experimental values were fitted using empirical equations of the type ν = ν (T) and ν = ν (x_i), respectively, in order to provide reliable models to account for the behaviour of the system. The excess kinematic viscosity ν^Ehas been determined and interpreted in terms of the type and nature of the interactions among the components of the mixture. Using the experimental ν data, the thermodynamic properties ( ΔG ^* , ΔH ^* ,ΔS ^*  ) of the viscous flow have been obtained from the Eyring’s approach and standard thermodynamic equations. Furthermore, excess mixing functions, such asΔG ^* E , have been determined, and found to evidence the existence of quite strong specific interactions among the components, probably due to the formation of hydrogen bonds and dipolar networks. However, all the calculated excess mixing properties suggest the absence of stable three-component adducts.