Molecular structure of caffeine as determined by gas electron diffraction aided by theoretical calculations

The molecular structure of caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) was determined by means of gas electron diffraction. The nozzle temperature was 185 °C. The results of MP2 and B3LYP calculations with the 6-31G⁷ basis set were used as supporting information. These calculations predicted that caffeine has only one conformer and some of the methyl groups perform low frequency internal rotation. The electron diffraction data were analyzed on this basis. The determined structural parameters (r_g and ∠_α) of caffeine are as follows: <r(NC)_ring> = 1.382(3) Å; r(CC) = 1.382(←) Å; r(CC) = 1.446(18) Å; r(CN) = 1.297(11) Å; <r(NC_methyl)> = 1.459(13) Å; <r(CO)> = 1.206(5) Å; <r(CH)> = 1.085(11) Å; ∠N₁C₂N₃ = 116.5(11)°; ∠N₃C₄C₅ = 121. 5(13)°; ∠C₄C₅C₆ = 122.9(10)°; ∠C₄C₅N₇ = 104.7(14)°; ∠N₉–C₄=C₅ = 111.6(10)°; <∠NCH_methyl> = 108.5(28)°. Angle brackets denote average values; parenthesized values are the estimated limits of error (3σ) referring to the last significant digit; left arrow in parentheses means that this parameter is bound to the preceding one.     

Structure,infrared and Raman spectroscopic studies of newly synthetic AII(SbV0.50FeIII0.50)(PO4)2 (ABa,Sr, Pb) phosphates with yavapaiite structure

The synthesis and structural study of three new A^II(Sb^V_0.5Fe^III_0.5)(PO₄)₂ (ABa, Sr, Pb) phosphates belonging to the ASbFePO system were reported here for the first time. Structures of [Ba], [Sr] and [Pb] compounds, obtained by solid state reaction in air atmosphere, were determined at room temperature from X-ray powder diffraction using the Rietveld method. Ba^II(Sb^V_0.5Fe^III_0.5)(PO₄)₂ features the yavapaiite-type structure, with space group C2/m, Z = 2 and a = 8.1568(4) Å; b = 5.1996(3) Å c = 7.8290(4) Å; β = 94.53(1)°. A^II(Sb^V_0.5Fe^III_0.5)(PO₄)₂ (ASr, Pb) compounds have a distorted yavapaiite structure with space group C2/c, Z = 4 and a = 16.5215(2) Å; b = 5.1891(1) Å c = 8.0489(1) Å; β = 115.70(1)° for [Sr]; a = 16.6925(2) Å; b = 5.1832(1) Å c = 8.1215(1) Å; β = 115.03(1)° for [Pb]. Raman and Infrared spectroscopic study was used to obtain further structural information about the nature of bonding in selected compositions.     

Observation of vinylidene emission in mixed phosphine/diimine complexes of Ru(II) at room temperature in solution

The mixed ruthenium(II) complexes trans-[RuCl₂(PPh₃)₂(bipy)] (1), trans-[RuCl₂(PPh₃)₂(Me₂bipy)](2), cis-[RuCl₂(dcype)(bipy)](3), cis-[RuCl₂(dcype)(Me₂bipy)](4) (PPh₃ = triphenylphosphine, dcype = 1,2-bis(dicyclohexylphosphino)ethane, bipy = 2,2′-bipyridine, Me₂bipy = 4,4′-dimethyl-2,2′-bipyridine) were used as precursors to synthesize the associated vinylidene complexes. The complexes [RuCl(CCHPh)(PPh₃)₂(bipy)]PF₆ (5), [RuCl(CCHPh)(PPh₃)₂(Me₂bipy)]PF₆ (6), [RuCl(CCHPh)(dcype)(bipy)]PF₆ (7), [RuCl(CCHPh)(dcype)(bipy)]PF₆ (8) were characterized and their spectral, electrochemical, photochemical and photophysical properties were examined. The emission assigned to the π–π1 excited state from the vinylidene ligand is irradiation wavelength (340, 400, 430 nm) and solvent (CH₂Cl₂, CH₃CN, EtOH/MeOH) dependent. The cyclic voltammograms of (6) and (7) show a reversible metal oxidation peak and two successive ligand reductions in the +1.5-(−0.64) V range. The reduction of the vinylidene leads to the formation of the acetylide complex, but due the hydrogen abstraction the process is irreversible. The studies described here suggest that for practical applications such as functional materials, nonlinear optics, building blocks and supramolecular photochemistry.     

Observation of vinylidene emission in mixed phosphine/diimine complexes of Ru(II) at room temperature in solution

The mixed ruthenium(II) complexes trans-[RuCl₂(PPh₃)₂(bipy)] (1), trans-[RuCl₂(PPh₃)₂(Me₂bipy)](2), cis-[RuCl₂(dcype)(bipy)](3), cis-[RuCl₂(dcype)(Me₂bipy)](4) (PPh₃ = triphenylphosphine, dcype = 1,2-bis(dicyclohexylphosphino)ethane, bipy = 2,2′-bipyridine, Me₂bipy = 4,4′-dimethyl-2,2′-bipyridine) were used as precursors to synthesize the associated vinylidene complexes. The complexes [RuCl(CCHPh)(PPh₃)₂(bipy)]PF₆ (5), [RuCl(CCHPh)(PPh₃)₂(Me₂bipy)]PF₆ (6), [RuCl(CCHPh)(dcype)(bipy)]PF₆ (7), [RuCl(CCHPh)(dcype)(bipy)]PF₆ (8) were characterized and their spectral, electrochemical, photochemical and photophysical properties were examined. The emission assigned to the π–π1 excited state from the vinylidene ligand is irradiation wavelength (340, 400, 430 nm) and solvent (CH₂Cl₂, CH₃CN, EtOH/MeOH) dependent. The cyclic voltammograms of (6) and (7) show a reversible metal oxidation peak and two successive ligand reductions in the +1.5-(?0.64) V range. The reduction of the vinylidene leads to the formation of the acetylide complex, but due the hydrogen abstraction the process is irreversible. The studies described here suggest that for practical applications such as functional materials, nonlinear optics, building blocks and supramolecular photochemistry.     

Nitrogen- and oxygen-bridged bidentate phosphaalkene ligands

An overview is given on synthesis and structures of new bidentate phosphaalkene ligands [(RMe₂Si)₂CP]₂E (E = O, NR, N^?) and (RMe₂Si)₂CPN(R′)PR′′₂. Exceptional properties of these ligands, extending beyond predictable properties of phosphaalkenes are: (i) the NSi bond cleavage of [(iPrMe₂Si)₂CP]₂NSiMe₃ with Au^I and Rh^I chloro complexes under mild conditions leading to binuclear complexes of the 6π-delocalised imidobisphosphaalkene anion [(iPrMe₂Si)₂CP]₂N^?, and (ii) the chlorotropic formation of molecular 1:2 Pd^II and Pt^II metallochloroylid complexes with novel ylid-type ligands [(RMe₂Si)₂CP(Cl)N(R)PR₂]^?, and the transformation of a P-platina-P-chloroylid complex into a C-platina phosphaalkene by intramolecular chlorosilane elimination. Properties of the heavier congeners [(RMe₂Si)₂CP]₂E (E = S, Se, Te, PR, P^?, As^?) and (RMe₂Si)₂CPEPR′′₂ (E = S, Se, Te) are also described.     

Understanding the reactivity of [WNAr(CH2tBu)2(CHtBu)] (Ar = 2,6-iPrC6H3) with silica partially dehydroxylated at low temperatures through a combined use of molecular and surface organometallic chemistry

Reaction of [WNAr(CH₂tBu)₂(CHtBu)] (Ar = 2,6-iPrC₆H₃) with silica partially dehydoxylated at 200 °C does not lead only to the expected bisgrafted [(SiO)₂WNAr(CHtBu)] species, but also surface reaction intermediates such as [(SiO)₂WNAr(CH₂tBu)₂]. All these species were characterized by infrared spectroscopy, 1D and 2D solid state NMR, elemental analysis and molecular models obtained by using silsesquioxanes. While a mixture of several surface species, the resulting material displays high activity in the olefin metathesis.     

A theoretical study on the alkene insertion step in Rh-Yanphos catalyzed hydroformylation

This paper studied the mechanism of the alkene insertion elementary step in the asymmetric hydroformylation （AHF） catalyzed by RhH（CO）2[（R,S）-Yanphos] using four alkene substrates （CH2=CH- Ph, CH2=CH-Ph-（p）-Me, CH2=CH-C（==O）OCH3 and CH2=CH-OC（=O）-Ph, abbreviated as A1-A4）. Interestingly, the equatorial vertical coordination mode （A mode） with respect to the Rh center was found for AI and A2 but not for A3 and A4, although the equatorial in-plane coordination mode （E mode） was found for A1 -A4. The relative energy of the E mode of the -q2-intermediates is lower than that of the A mode. In the alkene insertion step, Path 1 is more favorable than Path 2 for this system. As for AI and A2, there could be a transformation between 2eq and 2ax.     

Synthesis,molecular structure and reactivity of new π-conjugated diyne with ferrocenyl and phenyl units

New π-conjugated butadiynyl ligand FcC(CH₃)₂Fc′–CC–CC–Ph (L₁) has been synthesized and its reaction with Co₂(CO)₈ has been studied. New clusters [FcC(CH₃)₂Fc′–CC–CC–Ph][Co₂(CO)₆]_n [(1): n = 1; (2): n = 2] and [Fc–CC–CC–Ph][Co₂(CO)₆]_n [(3): n =  1; (4): n = 2] were obtained by the reaction of ligands FcC(CH₃)₂Fc′–CC–CC–Ph (L₁) and Fc–CC–CC–Ph (L₂) with Co₂(CO)₈ respectively and the composition and structure of the clusters and ligands have been characterized by elemental analysis, FTIR, ¹H and ¹³C NMR and MS. The crystal structures of compounds L₁, L₂, 2 and 4 have been determined by X-ray single crystal analysis.     

Olefin metathesis for metal incorporation: Preparation of conjugated ruthenium-containing complexes and polymers

Olefin Metathesis for Metal Incorporation (OMMI) was used for the stoichiometric attachment of ruthenium to both small and large polyenes. The dinuclear complexes (PCy₃)₂C1₂RuCH(CHCH)_nCHRu(PCy₃)₂Cl₂ (n = 1, 2), were prepared by reacting 2 equiv. of the Grubbs first-generation catalyst (PCy₃)₂C1₂Ru(CHPh)) with 1 equiv. of the appropriate polyene (1,3,5-hexatriene for n = 1 and 1,3,5,7-octatetraene for n = 2). Use of excess hexatriene led to the formation of the monoruthenium complex (PCy₃)₂C1₂RuCHCH CHCHCH₂. The mono- and di-ruthenium complexes exhibited marked differences in their spectroscopic and electrochemical properties, in addition to their Z–E isomerization rates. Nucleophilic attack of PCy₃ on the end CH₂ of the mono complex was observed, leading to both isomerization and phosphonium products. Extending the OMMI strategy to the second-generation catalyst was also done, despite the reduced initiation rate. The more reactive catalyst (H₂IMes)RuCl₂(CHPh)(3-bromopyridine)₂ allowed for ruthenium incorporation into polyacetylene, leading to the formation of polymers and oligomers with high ruthenium content.     

Hemilability and nonrigidity in metal complexes of bidentate P,PS donor ligands

Hemilability and nonrigidity in a series of mixed P,PS donor ligands has been studied in the complexes [Pd(P,PS)Cl₂], [Pd(η³-C₃H₅)(P,PS)][SbF₆], and [Rh(cod)(P,PS)][SbF₆] (P,PS = Ph₂P-Q-P(S)Ph₂). The effect of bite angle, the rigidity of the ligand backbone, and the role of the ancillary ligands are discussed.     

Unexpected formation of anti-1,2-W2(SBut)2(NMe2)4 in the thiolysis of gauche-1,2-W2Cp2(NMe2)4 and W2COT(NMe2)4 with ButSH

Thiolysis of W₂Cp₂(NMe₂)₄ and W₂COT(NMe₂)₄ with excess Bu^tSH leads to cleavage of the respective carbocyclic rings from the ditungsten center and formation of the compound anti-1,2-W₂(SBu^t)₂(NMe₂)₄ which was characterized via a single-crystal X-ray diffraction study. This product was found to be isostructural with its dimolybdenum analogue. The compound is a prototypical ethane-like dimer having a WW bond distance of 2.3011(3) Å and thiolate ligands in an anti configuration about the WW bond. The thiolysis reactions for both dimethylamide precursors are contrasted with the results of their respective alcoholysis reactions.     

Reaction of the RuTp(PR3)Cl fragment with alkynols: Formation of carbene,vinylidene, allenylidene,and carbyne complexes

The reaction of RuTp(COD)Cl (1) with PR₃ (PR₃ = PPh₂ⁱPr, PⁱPr₃, PPh₃) and propargylic alcohols HCCCPh₂OH, HCCCFc₂OH (Fc = ferrocenyl), and HCCC(Ph)MeOH has been studied.In the case of PR₃ = PPh₂ⁱPr, PⁱPr₃ and HCCCPh₂OH, the 3-hydroxyvinylidene complexes RuTp(PPh₂ⁱPr)(CCHC(Ph)₂OH)Cl (2a) and RuTp(PⁱPr₃)(CCHC(Ph₂)OH)Cl (2b) were isolated.With PR₃ = PPh₂ⁱPr and HCCCFc₂OH as well as with PR₃ = PPh₃ and HCCCPh₂OH dehydration takes place affording the allenylidene complexes RuTp(PPh₂ⁱPr)(CCCFc₂)Cl (3b) and RuTp(PPh₃)(CCCPh₂)Cl (3c).Similarly, with PPh₂ⁱPr and HCCC(Ph)MeOH rapid elimination of water results in the formation of the vinylvinylidene complex RuTp(PPh₂ⁱPr)(CCHC(Ph)CH₂)Cl (4).In contrast to the reactions of the RuTp(PR₃)Cl fragment with propargylic alcohols, with HCC(CH₂)_nOH (n = 2, 3, 4, 5) six-, and seven-membered cyclic oxycarbene complexes RuTp(PR₃)(C₄H₆O)Cl (5), RuTp(PR₃)(C₅H₈O)Cl (6), and RuTp(PR₃)(C₆H₁₀O)Cl (7) are obtained. On the other hand, with 1-ethynylcyclohexanol the vinylvinylidene complex RuTp(PPh₂ⁱPr)(CCHC₆H₉)Cl (8) is formed. The reaction of the allenylidene complexes 3a–c with acid has been investigated. Addition of CF₃COOH to a solution of 3a–c resulted in the reversible formation of the novel RuTp vinylcarbyne complexes [RuTp(PPh₂ⁱPr)(C–CHCPh₂)Cl]⁺ (9a), [RuTp(PPh₂ⁱPr)(C–CHCFc₂)Cl]⁺ (9b), and [RuTp(PPh₃)(C–CHCPh₂)Cl]⁺ (9c). The structures of 3a, 3b, and 5b have been determined by X-ray crystallography.     

A convenient route to six-membered heterocyclic carbene complexes: Reactions of aminoallenylidene complexes with 1,3-bidentate nucleophiles

Pentacarbonyl dimethylamino(methoxy)allenylidene complexes of chromium and tungsten, [(CO)₅MCCC(NMe₂)OMe] (M = Cr (1a), W (1b)), react with 1,3-bidentate nucleophiles such as amidines and guanidine, H₂N–C(NH)R (R = Ph, C₆H₄NH₂-4, C₆H₄NO₂-3, NH₂), by displacing the methoxy substituent to give exclusively dimethylamino(imino)-allenylidene complexes, [(CO)₅MCCC{NC(NH₂)R}NMe₂] (2a–5a, 2b). Treatment of the chromium complexes 2a–5a with catalytic amounts of hydrochloric acid or HBF₄ gives rise to an intramolecular cyclization. Addition of the terminal NH₂ substituent to the C_α–C_β bond of the allenylidene chain affords pyrimidinylidene complexes 6–9 in high yield. In contrast to the chromium complexes 2a–5a, the corresponding tungsten complex 2b could not be induced to cyclize due to the lower electrophilicity of the α-carbon atom in 2b. The dimethylamino(phenyl)allenylidene complex [(CO)₅CrCCC(NMe₂)Ph] (10) reacts with benzamidine or guanidine similarly to 1a. However, the second reaction step – cyclization to give pyrimidinylidene complexes – proceeds much faster. Therefore, the formation of an imino(phenyl)allenylidene complex as an intermediate is established only by IR spectroscopy. The analogous reaction of 10 with 3-amino-5-methylpyrazole affords, via a formal [3+3]-cycloaddition, a pyrazolo[1,5a]pyrimidinylidene complex 13. Compound 13 is obtained as two isomers differing in the relative position of the N-bound proton (1H or 4H). The related reaction of 10 with thioacetamide yields a thiazinylidene complex and additionally an alkenyl(amino)carbene complex.     

Reactions of α-phenylethynyl-trans-β-styryl complexes with isonitriles: hemi-labile alkyne coordination

Treatment of the complex [Ru{C(CCPh)CHPh}Cl(CO)(PPh₃)₂] (1) with one equivalent of CNR(R =^tBu, C₆H₃Me₂-2,6) gives [Ru{C(CCPh)CHPh}Cl(CNR)(CO)(PPh₃)₂]. Addition of a further equivalent of isonitrile and [NH₄]PF₆ leads to the salts [Ru{C(CCPh)CHPh}Cl(CNR)₂(CO)(PPh₃)₂]PF₆ and the mixed species [Ru{C(CCPh) CHPh}(CO)(CN^tBu)(CNC₆H₃Me₂-2,6)(PPh₃)₂]PF₆. The related [Ru{C(CCPh)CHPh}(CN^t(CO)₂     

1,3-Dipolar cycloaddition of diaryldiazomethanes across N-ethoxy-carbonyl-N-(2,2,2-trichloroethylidene)amine and reactivity of the resulting 2-azabutadienes towards thiolates and cyclic amides

1,3-dipolar cycloaddition of diaryldiazomethanes Ar₂CN₂ across Cl₃C–CHN–CO₂Et 1 yields Δ³-1,2,4-triazolines 2. Thermolysis of 2 leads, via transient azomethine ylides 3, to diaryldichloroazabutadienes [Ar(Ar')CN–CHCCl₂] 4. Treatment of 4a (Ar = Ar' = C₆H₅) and 4c (Ar = Ar' = p-ClC₆H₄) with NaSR in DMF yields 2-azabutadienes [Ar₂CN–C(H)C(SR)₂] 5. In contrast, nucleophilic attack of NaStBu on 4 affords azadienic dithioethers [Ar₂CN–C(S^tBu)C(H)(S^tBu)] (7a Ar = C₆H₅; 7b Ar' = p-ClC₆H₄). The reaction of 4a with NaSEt conducted in neat EtSH produces [Ph₂CN–C(H)(SEt)–CCl₂H] 8, which after dehydrochloration by NaOMe and subsequent addition of NaSEt is converted to [Ph₂CN–C(SEt)C(H)(SEt)] 7c. Upon the reaction of 4c with NaSⁱPr, the intermediate dithioether [(p-ClC₆H₄)₂CN–CHC(SⁱPr)₂] 5k is converted to tetrakisthioether [(p-ⁱPrSC₆H₄)₂CN–CHC(SⁱPr)₂] 6. Treatment of 4a with the sodium salt of piperidine leads to [Ph₂CN–CHC(NC₅H₁₀)₂] 10. The coordination of 6 on CuBr affords the macrocyclic dinuclear Cu(I) complex 11. The crystal structures of 5i, 7a,b, 10 and 11 have been determined by X-ray diffraction.     

Further molecular engineering of diruthenium-(2-anilinopyridinate) alkynyl compounds through ligand design

A modified ap ligand, 2-(3,5-dimethoxyanilino)pyridine (HDiMeOap) and its diruthenium compounds Ru₂(DiMeOap)₄Cl (1), Ru₂(DiMeOap)₄(CCCCSiMe₃) (2) and Ru₂(DiMeOap)₄(CCCCSiMe₃)₂ (3) were prepared and characterized. New compounds Ru₂(MeOap)₄(CCCCSiMe₃)_x (x = 1, 4; 2, 5; MeOap is 2-(3-methoxyanilino)pyridinate) were prepared from the previously reported Ru₂(MeOap)₄Cl. In addition, two related diruthenium compounds containing ferrocenyl acetylide ligand, Ru₂(MeOap)₄(CCFc) (6) and Ru₂(ap)₄(CCCCFc) (7), were synthesized. Molecular structures of compounds 1, 2, 6 and 7 were established using single crystal X-ray diffraction study.     

Metal-(phenylthio)alkanoic acid interactions— VII. The crystal and molecular structures of diaquabis[(benzylthio)acetato]-zinc(II), catena- [diaqua-tetra[(benzylthio)acetato]-bis[cadmium(II)], catena-tetra-μ-{2-methyl-3- (phenylthio)propionato-O,O′]-bis[copper(II)]} and tetra-μ-[2-methyl-2-(phenylthio)propionato-O,O′]- bis[ethanolcopper(II)]

The crystal structures of diaquabis[(benzylthio)acetato]zinc(II), [Zn(BTA)₂ (H₂O)₂] (1), catena-[diaqua-tetra[(benzylthio)acetato)]-bis[cadmium(II)], [Cd₂(BTA)₄ H₂O)₂]_n (2), catena-{tetra-μ-[2-methyl-3-(phenylthio)propionato-O,O′]-bis[copper (II)]}, [Cu₂(MPTP)₄]_n (3) and tetra-μ-[2-methyl-2-(phenylthio)propionato-O,O′]- bis[ethanol copper(II)], [Cu₂(PTIBA)₄(EtOH)₂] (4) have been determined using X-ray diffraction techniques. Complex (1) is monomeric with distorted octahedral stereochemistry and lies on a two-fold rotational axis. The MO₆ coordination involves four oxygens from two slightly asymmetric bidentate BTA car☐yl groups [ZnO, 2.138(3), 2.28(3)Å] and two cis-related waters [ZnOw, 1.996(3)Å]. The cadmium complex (2) is best described in terms of a polymer with the repeating unit consisting of two different centres, one seven, the other six-coordinate. With the first, the distorted MO₆S coordination sphere has four oxygens from two asymmetric bidentate car☐ylate groups (ligands B and C) [CdO, 2.36, 2.56(1)Å; 2.26, 2.67(1)Å], an oxygen and a sulphur from a bidentate chelate ligand (A) [CdO, 2.36(1)Å; CdS, 2.773(4)Å] and an oxygen from a bridging car☐yl group (ligand D) [CdO, 2.28(1)Å]. Ligands C and D also bridge two Cd centres through sulphurs [CdS, 2.739, 2.723(4)Å]. The second car☐yl oxygen of ligand A also forms a bridge to the second Cd [(CdO, 2.30(1)Å], while the distorted octahedral MO₄S₂ stereochemistry is completed by two waters [CdO, 2.25(1), 2.49(1)Å] and a sulphur from ligand D [CdS, 2.723(4)Å] giving a polymer structure. Complexes (3) and (4) are centrosymmetric tetra-car☐ylate bridged dimers [for (3) Cu ··· Cu, 2.586(3)Å; mean CuO(equatorial), 1.957(11)Å; for the two independent dimers in (4), Cu ··· Cu, 2.596(1), 2.616(1)Å; CuO (equatorial), 1.952(4), 1.968(4)Åmean]. The axial positions of the dimer in (3) are occupied by car☐yl oxygens of adjacent dimers [CuO, 2.280(9)Å] forming a polymer structure. In contrast, these positions in (4) are occupied by ethanol molecules with CuO, 2.222(3) and 2.177(4)Årespectively for the two independent dimers.     

1,1-Bis(trifluoromethyl)butadiene-1,3—A new fluorinated building block

Although 1,1-bis(trifluoromethyl)butadiene-1,3 (1) reacts with dimethylamine with selective formation of 1,4-adduct [trans-(CF₃)₂CHCHCHCH₂N(CH₃)₂], halogenation of 1 proceeds with predominant formation (>92%) of 1,2-adducts (CF₃)₂CCHCHXCH₂X (X = Cl or Br). Electrophilic conjugated addition of “ClF” or “BrF” to 1 proceeds exclusively with the formation of 1,2-adducts (CF₃)₂CCHCHFCH₂X (major) and (CF₃)₂CCHCHXCH₂F (X = Cl or Br). Difluorocarbene adds selectively to CHCH₂ moiety of 1 forming thermally stable vinylcyclopropane. In Diels-Alder reaction with linear or cyclic dienes (butadienes, cyclopentadiene, cyclohexadiene-1,3) and quadricyclane compound 1 behaves as dienophile providing for the reaction electron-deficient CHCH₂ bond. The relative rate of cycloaddition of 1 and other fluoroolefins to quadricyclane, measured by high temperature NMR, indicates that (CF₃)₂CCH acts as very strong electron-withdrawing substituent. Synthetic utility of products based on 1 was also demonstrated.     

‘Pincer’ pyridyl- and bipyridyl-N-heterocyclic carbene analogues of the Grubbs’ metathesis catalyst

The ‘pincer’ pyridine-dicarbene and bipyridyl-carbene ruthenium benzylidene complexes, Ru(C–N–C)Cl₂(CHPh) and Ru(C–N–N)Cl₂(CHPh), (C–N–C) = 2,6-bis(DiPP-imidazol-2-ylidene)pyridine, (C–N–N) = (DiPP-imidazol-2-ylidene)bipyridine, have been prepared and characterised by spectroscopic and diffraction methods. They exhibit moderate metathesis activity. Non-symmetrical linear tridentate ether-functionalised N-heterocyclic carbene pro-ligands are also described.     

Phosphorus-substituted carbene complexes: Chelates,pincers and spirocycles

The syntheses, structural characterizations and reactivity patterns of main group and late transition metal carbene complexes of the bis(phosphoranimino)methandiide, [C(Ph₂PNSiMe₃)₂]²⁻, and the carbodiphosphorane, Ph₃PCPPh₃, are described and compared to previously reviewed early transition metal analogues. Bimetallic spirocyclic aluminum complexes of the former ligand are accessed by spontaneous double deprotonation of the central carbon atom of the parent, CH₂(Ph₂PNSiMe₃)₂, by two equivalents of AlMe₃, whereas the synthesis of platinum complexes requires the intermediacy of the tetralithium dimer, [Li₂C(Ph₂PNSiMe₃)₂]₂, and elimination of LiCl from a metal chloride precursor. In contrast to the early transition metal analogues, which are N,C,N-pincer, Schrock-type alkylidenes, the C,N-chelated platinum complexes are more akin to Fischer carbenes, and their chemistry is dominated by the nucleophilicity of free nitrogen atom and insertions into labile N–Si bonds. Chelated and pincer carbene complexes of rhodium result from single and double orthometallations, respectively, of the phenyl rings in Ph₃PCPPh₃; the latter compounds represent a wholly new class of C,C,C-pincer complexes. Electronic structure calculations show that the metal–carbon interaction in these compounds may be described as a dative, two-electron, C → M σ-bond. The free bis(phosphoranimino)methandiide and carbodiphosphorane ligands, while not having formal six valence electron resonance forms, may be thought of as having “pull–pull” Fischer carbene character, but the metal to which they become coordinated ultimately dictates their chemistry.