Stepwise phosphine sulfide formation and metal-bridging reaction of tetradentate and tridentate phosphine ligands on palladium(II)

Kinetic studies on the stepwise phosphine sulfide formation reaction of the five-coordinate trigonal-bipyramidal Pd(II) complexes with the tripodal tetradentate phosphine ligand, [PdCl(pp₃)]Cl and [Pd(4-Cltp)(pp₃)](BF₄) (pp₃ = tris[2-(diphenylphosphino)ethyl]phosphine; 4-Cltp = 4-chlorothiophenolate), were carried out, and it was revealed that the reactions proceeded via the intermediate with a pendant dissociated phosphino group. Formation of the intermediate was utilized for the bridging reaction onto Pt(II) to form the phosphine-bridged linear trinuclear and cyclic tetranuclear mixed-metal complexes. Difference in the steric conversion mechanism in the phosphine-bridging reaction between the linear tridentate phosphine (bis[2-(diphenylphosphino)ethyl]phenylphosphine) and pp₃ is also reported.     

A resolution of the monodentate P*-chiral phosphine PButC6H4Br-4 and its NMR-deduced absolute configuration

Both enantiomers of the monodentate phosphine PBu^tC₆H₄Br-4 were obtained in an enantiopure state by chromatographic separation of their diastereomeric adducts with a new homochiral ortho-palladated resolving agent derived from α-tert-Bu-substituted tertiary benzylamine. The conformation of the palladacycle and the absolute configuration of the phosphine were determined using ¹H NMR spectroscopy (including NOE technique) and confirmed by an X-ray diffraction study of both diastereomeric complexes. The enantiomers of the resolved phosphine were displaced from the individual diastereomers of the palladium(II) complexes with recovery of the starting resolving agent, and trapped in the form of binuclear coordination complexes of palladium(II).     

Expedient one-pot organometallics-free synthesis of tris(2-pyridyl)phosphine from 2-bromopyridine and elemental phosphorus

2-Bromopyridine reacts with elemental phosphorus (red or white) in a superbasic KOH/DMSO(H₂O) suspension at 100 °C (for red phosphorus) and 75 °C (for white phosphorus) over 3 h to afford tris(2-pyridyl)phosphine in a 62% yield (from red phosphorus) and a 50% yield (from white phosphorus). Under microwave assistance, the reaction with red phosphorus takes just 20 min to produce tris(2-pyridyl)phosphine in 53% yield. A hitherto unknown complex, [Pd(PPy₃)₂Cl₂]·CH₂Cl₂, synthesized from tris(2-pyridyl)phosphine and PdCl₂, has the cis-configuration; this is unusual for bis(phosphino)palladium dichloride complexes.     

Counterdisproportionation between cationic Ni(II) and phosphine Ni(0) complexes

The interaction of Ni(II) bis-tetrafluoroborate complexes [Ni(Dppe)₂](BF₄)₂ and [Ni(CH₃CN)₆](BF₄)₂ (where Dppe = 1,2-bis(diphenylphosphino)ethane)) with Ni(0) phosphine complexes Ni(Dppe)₂ and Ni(PPh₃)₄ in 1 : 1 mixture of toluene-acetonitrile was studied by the EPR method. The counter-disproportionation was shown to occur in a solution between the cationic Ni(II) complexes and the Ni(0) complexes to give Ni(I) complexes almost in quantitative amounts. The structures of the cationic Ni(I) complexes obtained were found to depend on both the solvent nature and the presence of a free phosphine in a solution.     

Developments in the chemistry of tris(hydroxymethyl)phosphine

Tris(hydroxymethyl)phosphine, P(CH₂OH)₃, a water-soluble compound, has been known for about 50 years but development of its coordination chemistry has been slow and relatively recent. During some collaborative studies with a pulp and paper research institute on testing water-soluble catalysts for hydrogenation of lignin in pulp and the unsaturated functionalities in lignin model compounds, with the aim of bleaching pulps, we discovered new, in situ, Ru-P(CH₂OH)₃ hydrogenation catalysts. Interest in the coordination chemistry of this phosphine thus ensued, and this review covers this topic as well as the coordination chemistry of a diphosphine analogue, bis[bis(hydroxymethyl)phosphino]ethane, (HOCH₂)₂P(CH₂)₂P(CH₂OH)₂. The applications of the water-soluble metal complexes of these two phosphines in the areas of catalysis and medicinal drugs are also described. These phosphines, in the absence of metals, were found serendipitously to be effective bleaching agents for pulps (and also brightness stabilizing agents), and some relevant organo-phosphorus chemistry from our group is also briefly presented, particularly because of its possible significance in hydroformylation and hydrogenation processes catalyzed by metal–phosphine complexes.     

Stereoselective preparation, structures, and reactivities of phosphine-bridged mixed-metal trinuclear and pentanuclear complexes with tris[2-(diphenylphosphino)ethyl]phosphine

The phosphine-bridged linear trinuclear and pentanuclear complexes with Pd(II)-Pt(II)-Pd(II), Ni(II)-Pt(II)-Ni(II), and Rh(III)-Pd(II)-Pt(II)-Pd(II)-Rh(III) metal-ion sequences were almost quantitatively formed by the stepwise phosphine-bridging reaction of the terminal phosphino groups of tris[2-(diphenylphosphino)ethyl]phosphine (pp3), which is the tetradentate bound ligand of the starting Pd(II) and Ni(II) complexes. The solid-state structures of the trinuclear complexes were determined by X-ray structural analyses, and the structures of the polynuclear complexes in solution were characterized by NMR spectroscopy. The trans and cis isomers of the trinuclear and pentanuclear complexes, which arise from the geometry around the Pt(II) center, were selectively obtained simply by changing the counteranion of the starting complexes: the tetrafluoroborate salts, [MX(pp3)](BF4) [M = Pd(II) or Ni(II), X = Cl- or 4-chlorothiophenolate (4-Cltp-)], gave only the trans isomers, and the chloride salt, [PdCl(pp3)]Cl, gave only the cis isomers. The formation of the trinuclear complex with the 4-Cltp- and chloro ligands, trans-[Pt(4-Cltp)2{PdCl(pp3)}2](BF4)2, proceeded with exchange between the thiolato ligand in the starting Pd(II) complex, [Pd(4-Cltp)(pp(3))](BF4), and the chloro ligands in the starting Pt(II) complex, trans-[PtCl2(NCC6H5)2], retaining the trans geometry around the Pt(II) center. In contrast, the formation reaction between [PdCl(pp3)]Cl and trans-[PtCl2(NCC6H5)2] was accompanied by the trans-to-cis geometrical change on the Pt(II) center to give the trinuclear complex, cis-[PtCl2{PdCl(pp3)}2]Cl2. The mechanisms of these structural conversions during the formation reactions were elucidated by the 31P NMR and absorption spectral changes. The differences in the catalytic activity for the Heck reaction were discussed in connection with the bridging structures of the polynuclear complexes in the catalytic cycle.     

Recoverable chiral palladium–sulfonated diphosphine catalysts for the asymmetric hydrocarboxylation of vinyl arenes

Water-soluble palladium complexes with sulfonated diphosphines dpppts (1,3-bis[di(m-sodiumsulfonatophenyl)phosphino]propane), dppbts (1,4-bis[di(m-sodiumsulfonatophenyl) phosphino]butane), (S,S)-BDPPTS (2,4-bis[di(m-sodiumsulfonatophenyl)phosphino]butane) and (R,R)-CBDTS (1,2-bis[di(m-sodiumsulfonatophenyl)phosphinomethyl]cyclobutane) are active in the hydrocarboxylation of vinyl arenes without addition of acid. The stability of the catalyst systems increases when the reaction is performed in an acidic medium and the catalysts could be recycled twice with no loss in activity or enantioselectivity in the case of the [Pd(OAc)₂]/BDPPTS system. Enantioselectivities up to 43% are obtained.     

Palladium(0) complexes coordinated with substituted olefins and tertiary phosphine ligands

New palladium(0) complexes with a variety of coordinated olefins [Pd(olefin)(PMePh₂)₂] (II) (olefin = styrene, ethyl methacrylate, methyl methacrylate, methyl acrylate, methacrylonitrile, and dimethyl maleate), were prepared by the reactions of [PdEt₂(PMePh₂)₂] (I) with corresponding olefins in toluene. These complexes were characterized by means of elemental analysis, IR and ¹H NMR spectroscopy and the chemical reactions. The dissociation of the coordinated olefin from complex II in solution was confirmed by spectroscopic studies of [Pd(mma)(PMePh₂)₂] (mma = methyl methacrylate). From the variable temperature NMR study, kinetic parameters for the dissociation process were determined as E_a = 7 kcal/mol, and ΔS³ (293 K) = -30 cal/deg · mol. Some new hydrido complexes, [Pd(H)ClL₂] (IV) (L = PMePh₂, PEtPh₂ and PEt₂Ph), were prepared by the reactions of [Pd(olefin)L₂] with dry HCl.     

Cyclometallation,part II. I.r. and1H N.m.r. studies of palladium(II) compounds with substitutedN-(benzylidene)amines

Summary New cyclometallated complexes of palladium containing substitutedN-(benzylidene)amines have been prepared and characterized. Palladium(II) acetate is used to make the acetato-bridged dimers, which undergo metathetical reactions to give the halo-bridged dimers. These when treated with PPh₃ or P(C₆H₁₁)₃ in a 12 molar ratio yield the phosphine monomers. I.r. and¹H n.m.r. studies show that palladium is coordinated through nitrogen, and also reveal the disposition of the halogen and phosphine ligands in the monomeric complexes.     

Coordination chemistry of an asymmetric P,N,O tridentate ligand containing primary phosphine, amine and alcohol donors

The asymmetric, heterodonor tridentate ligand 2(S)-amino-4-phosphinobutan-1-ol, S-PNO, has been prepared from (S)-aspartic acid and some aspects of its coordination chemistry with a number of metal complexes investigated. Reaction of S-PNO with appropriate metal precursors led to the isolation of the complexes fac-Cr(CO)₃(κ³-S-PNO), 1, fac-[Mn(CO)₃(κ³-S-PNO)]PF₆, 2, and fac-[Re(CO)₃(κ³-S-PNO)]BF₄, 3. The alcohol and amine donors in fac-Cr(CO)₃(κ³-S-PNO) were substituted upon addition of trivinylphosphine to 1 to give the complex fac-Cr(CO)₃(κ¹-P-S-PNO){P(C₂H₃)₃}₂, 4. Addition of base to 4 gave a coordinated linear tridentate P₃ ligand through the formation of two new chelate rings via hydrophosphination of one vinyl group on each coordinated P(C₂H₃)₃ with the P-H bonds of the complexed S-PNO. The alcohol donor in fac-[Re(CO)₃(κ³-S-PNO)]BF₄ is labile and can be substituted with tris(2-fluorophenyl)phosphine, PAr₃^F, to give fac-[Re(CO)₃(κ²-P,N-S-PNO)(PAr₃^F)]BF₄, 5. Attempts to form a macrocyclic ligand through addition of base to fac-[Re(CO)₃(κ²-P,N-S-PNO)(PAr₃^F)]BF₄ were unsuccessful due to loss of PAr₃^F prior to any ring-closure. All the complexes have been fully characterised by spectroscopic and analytical techniques including a single-crystal X-ray structure analysis of 2.     

Synthesis and characterization of cyclometallated palladium(II) and platinum(II) complexes with amide-thiolate ligands

The redox reaction of bis(2-benzamidophenyl) disulfide (H₂L-LH₂) with [Pd(PPh₃)₄] in a 1:1 ratio gave mononuclear and dinuclear palladium(II) complexes with 2-benzamidobenzenethiolate (H₂L⁻), [Pd(H₂L-S)₂(PPh₃)₂] (1) and [Pd₂(H₂L-S)₂ (μ-H₂L-S)₂(PPh₃)₂] (2). A similar reaction with [Pt(PPh₃)₄] produced only the corresponding mononuclear platinum(II) complex, [Pt(H₂L-S)₂(PPh₃)₂] (3). Treatment of these complexes with KOH led to the formation of cyclometallated palladium(II) and platinum(II) complexes, [Pd(L-C,N,S)(PPh₃)]⁻ ([4]⁻) and [Pt(L-C,N,S) (PPh₃)]⁻ ([5]⁻). The molecular structures of 2, 3 and [4]⁻ were determined by X-ray crystallography.     

Tris(tetramethylguanidinyl)phosphine: The Simplest Non-ionic Phosphorus Superbase and Strongly Donating Phosphine Ligand

We report the synthesis and properties of the much sought-after tris(1,1,3,3-tetramethylguanidinyl) phosphine P(tmg)₃, a crystalline, superbasic phosphine accessible through a short and scalable procedure from the cheap and commercially available bulk chemicals 1,1,3,3-tetramethylguanidine, tris(dimethylamino)-phosphine and phosphorus trichloride. The new phosphine exhibits exceptional electron donor properties and readily forms transition metal complexes with gold(I), palladium(II) and rhodium(I) precursors. The formation of zwitterionic Lewis base adducts with carbon dioxide and sulfur dioxide was explored. In addition, the complete series of phosphine chalcogenides was prepared from the reaction of P(tmg)₃ with N₂O and the elemental chalcogens.     

Oxidative addition of N-halosuccinimides to palladium(0): the discovery of neutral palladium(II) imidate complexes, which enhance Stille coupling of allylic and benzylic halides

The Stille coupling of organostannanes and organohalides, mediated by air and moisture stable palladium(II) phosphine complexes containing succinimide or phthalimide (imidate) ligands, has been investigated. An efficient synthetic route to several palladium(II) complexes containing succinimide and phthalimide ligands, has been developed. cis-Bromobis(triphenylphosphine)(N-succinimide)palladium(II) [(Ph₃P)₂Pd(N-Succ)Br] is shown to mediate the Stille coupling of allylic and benzylic halides with alkenyl, aryl and allyl stannanes. In competition experiments between 4-nitrobromobenzene and benzyl bromide with a cis-stannylvinyl ester, (Ph₃P)₂Pd(N-Succ)Br preferentially cross-couples benzyl bromide, whereas with other commonly employed precatalysts 4-nitrobromobenzene undergoes preferential cross-coupling. Furthermore, preferential reaction of deactivated benzyl bromides over activated benzyl bromides is observed for the first time. The type of halide and presence of a succinimide ligand are essential for effective Stille coupling. The type of phosphine ligand is also shown to alter the catalytic activity of palladium(II) succinimide complexes.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Tri­benzyl­phosphine oxide

The title compound, (C₆H₅CH₂)₃PO, is an organic tertiary phosphine oxide. The mol­ecule has threefold symmetry, with the P—O bond along the threefold axis. Main dimensions include P—O 1.488 (4), P—C 1.823 (3) Å and O—P—C 114.7 (1)°. The crystals were accidentally obtained when preparing complexes of nickel(II) with di­benzyl­phosphine.     

Firsts lysidinyl- and lysidinium-triphosphines Pd(II) complexes

The preparation of first lysidinyl-triphosphine ligand (named Triphosline) is described in three steps which are first a Michael type addition of imidazolidine (or lysidine) to diethylvinylphosphonate, second a phosphonate reduction with LiAlH₄ and third an anti-Markovnikov radical addition of the primary phosphine to diphenylvinylphosphine. The Triphosline behaves as a tridentate P-coordinating ligand in palladium(II) complexes. The dangling lysidine function is then cleanly and totally alkylated by methyl iodide to lead to a new kind of lysidinium-triphosphine complexes. Subsequent anion exchange with TlPF₆ affords the first example of a chloride free lysidinium-triphosphine palladium complex which has been fully characterized by spectroscopic and analytical methods.     

Synthesis and N.m.r. studies of bis-trisubstituted phosphine platinum(o) and palladium(o) complexes with push-pull olefins

Summary Platinum(0) and palladium(0) complexes of the type: P₂M(R₁R₂C=CR₃R₄) (P=trisubstituted phosphine; R₁, R₂, R₃ and R₄ are different groups having electron acceptor or electron donor properties; M=Pt or Pd) with so called pushpull olefins, have been prepared and characterized. In some cases unusual patterns in the n.m.r. spectra of olefinic protons were observed. The spectra were analyzed by computer simulation and general rules for ABMX patterns for this type of complexes are given.     

Synthesis and application of novel chiral phosphino-oxazoline ligands with 1,1′-binaphthyl skeleton

C₁-Symmetric phosphino-oxazolines, (S,S)- and (S,R)-2-[4-(isopropyl)oxazol-2-yl]-2′-diphenylphosphino-1,1′-binaphthyl, which possess both phosphine and oxazoline moieties, were prepared from racemic binaphthol and enantiomerically pure (S)-(+)-2-amino-3-methyl-1-butanol in high yields. Reaction of 1,3-diphenyl-2-propenyl acetate with dimethyl sodiomalonate in the presence of 2 mol% of palladium catalysts bearing the new chiral ligands proceeded with high enantioselectivity to give allylic alkylation products of up to 91% ee.     

Rapid geometrical equilibrium of palladium(II) complexes with tris[2-(diphenylphosphino)ethyl]phosphine disulfide and diselenide and their catalytic activity for Suzuki coupling reaction

Palladium(II) complexes with a tetradentate pseudo-tripodal ligand having two phosphino groups and two phosphine sulfide or selenide groups, pp₃X₂ (pp₃ = tris[2-(diphenylphosphino)ethyl]phosphine, X = S (1) or Se (2)), were prepared from [PdCl(pp₃)]Cl. Both of these phosphine chalcogenide complexes 1 and 2 showed rapid equilibrium between the five-coordinate [PdCl(pp₃X₂)]Cl with two bound phosphine chalcogenide groups and four-coordinate [PdCl₂(pp₃X₂)] with two dissociated pendant ones in chloroform. The thermodynamic parameters for the reaction, [PdCl(pp₃X₂)]⁺ + Cl⁻?[PdCl₂(pp₃X₂)], were obtained by low-temperature ³¹P NMR as follows: K²⁹⁸ = 3.7 × 10³ and 5.4 × 10² mol⁻¹, ΔH^° = 11.3 ± 0.3 and 13.4 ± 0.4 kJ mol⁻¹, and ΔS^° = 106 ± 2 and 97 ± 2 J mol⁻¹ K⁻¹ for 1 and 2, respectively. The rate for the geometrical change at 246.7 K for 1 was appreciably faster than that for 2. These thermodynamic and kinetic results indicate that the phosphine selenide Se atoms can stabilize the five-coordinate structure by effective π-back donation from Pd(II) compared with the phosphine sulfide S atoms. Difference in retention of the catalytic activity for Suzuki coupling, 2 > 1 > [PdCl(pp₃ or p₃)]Cl, was explained by difference in the π-accepting ability that stabilizes the catalytically active Pd(0) species. Considering the rapid dissociation-coordination equilibrium of the phosphine chalcogenide groups on Pd(II), it is probable that the oxidative addition and the subsequent transmetallation of the Pd(II) species are hardly blocked by the phosphine chalcogenide groups.     

Synthesis and characterization of some trans-hydridomethylbis(phosphine)-platinum(II) and -palladium(II) complexes

Several trans-hydridomethylbis(phosphine)-platinum(II) and -palladium(II) complexes have been made by the reaction: trans-M(H)Cl(PR₃)₂ + CH₃MgBr → trans-M(CH₃)(PR₃)₂ + MgClBr and their structures determined by ¹H NMR and IR spectroscopy. The complexes in which M  Pt and R  Cy (cyclohexyl) or i-Pr (isopropyl) are very stable in the solid state and in solution, while the compounds in which M  Pt, R  Et (ethyl) and M  Pd, R  i-Pr slowly decompose either in the solid state or in solution. The compound in which M  Pd and R  Cy was not isolated but was identified in solution.