Effect of mono-, di- and tri-ethanolammonium tetrafluoroborate protonic ionic liquids on the volatility of water, ethanol, and methanol

Vapor pressure data were measured for nine binary systems containing water, ethanol, or methanol with one of three protonic ionic liquids (PILs), viz. mono-, di- and tri-ethanolammonium tetrafluoroborate ([HMEA][BF₄], [HDEA][BF₄], and [HTEA][BF₄]), at varying temperatures and PIL-contents using a quasi-static ebulliometer. The vapor pressure data were correlated by NRTL model with an overall average absolute relative deviation (AARD) of 0.0175. It is showed that the effect of PILs on the vapor pressure lowering of solvents follows the order of [HMEA][BF₄] > [HDEA][BF₄] > [HTEA][BF₄], and the vapor pressure lowering degree follows the order of water > methanol > ethanol. Besides, the activity coefficients of solvent for binary system {solvent + PIL} at fixed PIL mole fraction of 0.10 were calculated using the regressed NRTL parameters. The results indicate that three PILs can give rise to a negative deviation from the Raoult's law for water and methanol and a positive deviation for ethanol to a varying degree, leading to the variation of relative volatility of a solvent.     

Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids

Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.     

(Liquid + liquid) equilibria for mixtures of dodecane and ethanol with alkylsulfate-based ionic liquids

The ternary (liquid + liquid) equilibrium (LLE) data for mixtures of dodecane (C₁₂H₂₆) and ethanol with ionic liquids 1,3-dimethylimidazolium methylsulfate [Mmim][MeSO₄], 1-ethyl-3-methylimidazolium methylsulfate, [Emim][MeSO₄] and 1-butyl-3-methylimidazolium methylsulfate, [Bmim][MeSO₄], were studied at T = 298.15 K and 0.101 MPa. The selectivity and solute distribution coefficient ratios determined from the data were used to examine the possibility of using these ionic liquids for extraction of ethanol from dodecane. The temperature dependency was investigated by measuring the LLE data for {dodecane + ethanol + [Mmim][MeSO₄]} at T = 313.15 K and 0.101 MPa. The Othmer–Tobias and Hand equations were used to test the consistency of the tie-line data. The tie-line data were correlated with the Non-Random Two Liquid (NRTL) equation which provided a good model and representation for the experimental results.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

Aggregation and micelle formation of ionic liquids in aqueous solution

Association of ionic liquids possessing n-octyl moiety either in the cation or in the anion has been studied in aqueous solution with conductivity and turbidity measurements as well as using 2-hydroxy-substituted Nile Red solvatochromic probe. 1-Butyl-3-methylimidazolium octyl sulfate was found to act as a surfactant above 0.031 M critical micelle concentration. In contrast, 1-methyl-3-octylimidazolium chloride produced inhomogeneous solution of larger aggregates, which were dissolved on the addition of more than 2:1 molar excess of sodium dodecyl sulfate (SDS) due to mixed micelle formation. Even small amount (<10 mM) of ionic liquids could markedly reduce the polarity of the Stern layer of SDS micelle.     

The Soret effect of mono-, di- and tri-glycols in ethanol

We employed thermal diffusion forced Rayleigh scattering (TDFRS) to investigate the chain length dependence of the thermal diffusion behavior of short glycols in ethanol. We studied three glycols, monoethylenglycol (MEG), diethylenglycol (DEG) and triethylenglycol (TEG), in an ethanol solution. In contrast to the polymer polyethylenglycol, the shorter glycols used within the framework of this study are completely soluble in ethanol, at least for low molar fractions. In order to guarantee a good solubility of the glycols, the measurements were limited to molar fractions of 10% and 20%. As the different glycols only differ by their chain length it will be possible to deduce its influence on the thermal diffusion properties. Due to the fairly short persistence length of the glycols, D(T) reaches already for the dimer a plateau value. This finding agrees with simulation results. Furthermore, the thermal expansion and the kinematic viscosity are measured to investigate if empirical correlations seen for other systems could be confirmed.     

Effect of ionic liquid 1-methylimidazolium chloride on the vapour liquid equilibrium of water,methanol, ethanol,and {water + ethanol} mixture

Measurements of vapour pressure data were conducted using a quasi-static ebulliometer for systems containing water, methanol, ethanol, and a mixture of {water + ethanol} in the presence of an ionic liquid (IL), namely, 1-methylimidazolium chloride ([MIm]Cl), wherein the IL-content ranged from w₂ = (0.10 to 0.50). The vapour pressure data of IL-containing binary systems were correlated by the NRTL model with an overall average absolute relative deviation (AARD) of 0.0103, and the resulting binary parameters were used to predict the vapour pressures of a ternary system {water + ethanol + [MIm]Cl} with an AARD less than 0.0077. Further, the isobaric vapour liquid equilibria (VLE) for the ternary system {water + ethanol + IL} with IL-content of w₃ = (0.10, 0.30, and 0.50) for [MIm]Cl and x₃ = 0.15 for [MIm]Cl, [C₄MIm]Cl, and [C₆MIm]Cl were predicted at 101.3 kPa, respectively. It is indicated that [MIm]Cl presents the strongest ability to enhance the relative volatility of ethanol to water in the mixture of {water + ethanol} than that of [C₄MIm]Cl and [C₆MIm]Cl, which is consistent with the cationic sizes and hence the ionic hydration ability. Therefore, distillation separation of the azeotrope of {water + ethanol} can be sufficiently facilitated by the addition of [MIm]Cl at a specified content.     

Effect of ionic liquids on the aggregation behavior of PEO-PPO-PEO block copolymers in aqueous solution

Effect of 1-butyl-3-methyl-imidazolium bromide (BmimBr) on the aggregation behavior of PEO-PPO-PEO Pluronic P104 aqueous solution was studied by Fourier transform infrared (FTIR) spectroscopy, freeze fracture transmission electron microscopy (FF-TEM), dynamic light scattering (DLS), and NMR spectroscopy. When the BmimBr concentration was below 1.232 mol/L, the critical micelle temperature (CMT) of Pluronic P104 remained constant, while the size of micelles increased with increasing the BmimBr concentration; above this concentration, the CMT of Pluronic P104 decreased abruptly, and bigger clusters of BmimBr were formed. The selective nuclear Overhauser effect (NOE) spectrum indicates that the PO block of the P104 interacts with the butyl group of the Bmim+ cation by hydrophobic interaction. It suggests that when the concentration of BmimBr is below 1.232 mol/L, there are P104 micelles in the aqueous solution with BmimBr embedding to the micellar core, while above this concentration, P104 micelles and BmimBr clusters coexist in the system.     

Laser photolysis studies of quaternary ammonium ionic liquids aqueous solution

The reactions between quaternary ammonium ionic liquids ([Me₃NC₂H₄OH]⁺[Zn₂Cl₅]⁻, abbrev. Ch-Zn₂Cl₅) and one-electron oxidant (SO₄^•−), have been studied by nano-second laser photolysis techniques. The mechanism of monophotonic ionization by 266 nm laser excitation was suggested and the quantum yield was estimated to be 0.04. The second-order decay rate constant of SO₄^•− oxidation reactions at 460 nm, 1.3 × 10⁹ M⁻¹ s⁻¹, was almost equal to the product rate constant of 1.5 × 10⁹ M⁻¹ s⁻¹ at 320 nm in Ch-Zn₂Cl₅ aqueous solution showing that the decay and the product were synchronic. Comparison of Ch-Zn₂Cl₅ with chloride choline and ZnCl₂ showed that the anion Zn₂Cl₅ ⁻ played an important role in photoionization while choline cation had little function on its photolysis and radiolysis. The present study would be helpful for understanding the application of ionic liquids in the field of electrochemical deposition.     

Suppression of deleterious effects of free silanols in liquid chromatography by imidazolium tetrafluoroborate ionic liquids

Silica-based stationary phases are commonly used in liquid chromatography, but their surface acidity causes known problems, especially when separating basic compounds. Deleterious effects of free silanols are not fully removed by standard prevention procedures consisting in adding alkylamines or other amino quenchers to the eluents. We found that ionic liquids of the imidazolium tetrafluoroborate class, added to mobile phases at concentrations of 0.5-1.5% (v/v), blocked silanols and provided excellent thin-layer chromatographic separations of strongly basic drugs which were otherwise not eluted, even with neat acetonitrile as the mobile phase. The silanol suppressing potency of imidazolium tetrafluoroborates was demonstrated to markedly exceed that of the standard mobile phase additives, like triethylamine, dimethyloctylamine and ammonia. The proposed new mobile phase additives were also demonstrated to provide reliable lipophilicity parameters of base drug analytes as determined by gradient mode of high-performance liquid chromatography. By applying the readily available and environmentally friendly imidazolium tetrafluoroborate ionic liquids, simple and efficient means of improvement of liquid chromatographic analysis of organic bases were elaborated.     

Measurement and prediction of vapor–liquid equilibria of ternary systems containing ionic liquids

For the first time vapor–liquid equilibrium (VLE) data for ternary systems containing ionic liquids are reported. The data were measured by means of a computer-operated static VLE apparatus at 353.15 K with the ionic liquids 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [EMIM]⁺[(CF₃SO₂)₂N]⁻ and 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [BMIM]⁺[(CF₃SO₂)₂N]⁻ and acetone, 2-propanol and water. The experimental VLE data of the binary systems were correlated using the Wilson, NRTL and UNIQUAC models. The errors using Wilson, NRTL, and UNIQUAC are 3.92%, 1.45%, and 1.53%. The g^E-model parameters of the binary systems were used to predict the VLE behavior of the ternary systems and the predictions were compared to the experimental datasets. The errors using Wilson-, NRTL-, and UNIQUAC-parameters are 5.61%, 7.22%, and 5.02%.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Surface adsorption and micelle formation of surface active ionic liquids in aqueous solution

Aqueous solutions of three kinds of surface active ionic liquids composed of the 1-alkyl-3-methylimidazolium cation have been investigated by means of surface tension and electrical conductivity measurements at room temperature (298 K). The surface tension measurements provided a series of parameters, including critical micelle concentration (cmc), surface tension at the cmc (gammacmc), adsorption efficiency (pC20), and effectiveness of surface tension reduction (Picmc). In addition, with application of the Gibbs adsorption isotherm, maximum surface excess concentration (Gammamax) and minimum surface area/molecule (Amin) at the air-water interface were estimated. The effect of sodium halides, NaCl, NaBr, and NaI, on the surface activity was also investigated. It was found that both the pC20 and the Picmc were rather larger than those reported for traditional ionic surfactants and the cmc values were somewhat lower than those for typical cationic surfactants, alkyltrimethylammonium bromides, and comparable to typical anionic surfactants, sodium alkyl sulfates. These results demonstrate that the surface activity of long-chained imidazolium IL is somewhat superior to that of conventional ionic surfactants.     

Electrical conductivity study on micelle formation of long-chain imidazolium ionic liquids in aqueous solution

Electrical conductivity was measured for aqueous solutions of long-chain imidazolium ionic liquids (IL), 1-alkyl-3-methylimidazolium bromides with C(12)-C(16) alkyl chains. The break points appeared in specific conductivity (kappa) vs concentration (c) plot indicates that the molecular aggregates, i.e., micelles, are formed in aqueous solutions of these IL species. The critical micelle concentration (cmc) determined from the kappa vs c plot is somewhat lower than those for typical cationic surfactants, alkyltrimethylammonium bromides with the same hydrocarbon chain length. The electrical conductivity data were analyzed according to the mixed electrolyte model of micellar solution, and the aggregation number, n, and the degree of counter ion binding, beta, were estimated. The n values of the present ILs are somewhat smaller than those reported for alkyltrimethylammonium bromides, which may be attributed to bulkiness of the cationic head group of the IL species. The thermodynamic parameters for micelle formation of the present ILs were estimated using the values of cmc and beta as a function of temperature. The contribution of entropy term to the micelle formation is superior to that of enthalpy term below about 30 degrees C, and it becomes opposite at higher temperature. This coincides with the picture drawn for the micelle formation of conventional ionic surfactants.     

Self-aggregation and antimicrobial activity of imidazolium and pyridinium based ionic liquids in aqueous solution

Adsorbed cetyldimethylbenzylammonium chloride (CDBACl) or cetyltrimethylammonium bromide (CTAB) on mercury is used as template for the adsorption of CTAB, CDBACl, or their equimolar mixture at 20 °C. Adsorptive stripping voltammetry with the two step procedure is used. The results are compared with previously published results on the adsorption of CTAB and CDBACl on mercury and then transferred in base electrolyte. A surfactant is preadsorbed. The adsorption of the second does not remove away from the mercury the first one, as evidenced by the capacitance measurements and the repeated scans. The surfactants were maintained close to each other and in the vicinity of the electrode by the applied electric field. In all cases studied, there was a decrease in the capacitance in the potential range -0.8 to -1 V to very low capacitance values forming condensed film. Mixed films and synergy effects were observed. The already adsorbed CTAB on mercury did not permit the desorption-reorientation peaks of CDBACl. Shifts of the capacitance peaks were observed to more positive potentials and were attributed to the occurrence of a slow change in the organization of the monolayer. The electrical state of the preadsorbed surfactant would be of critical importance in the formation of the various structures. The results suggested that the ordering and arrangement of molecules could be controlled by appropriate selection of templates.     

Effect of addition of hydrophilic ionic liquid 3-methyl-1-pentylimidazolium tetrafluoroborate ([C5mim][BF4]) on an aqueous solution of triton X-100

The effect of addition of 3-methyl-1-pentylimidazolium tetrafluoroborate ([C₅mim][BF₄]) on the micellization of a nonionic surfactant, Triton X-100 (TX-100), has been investigated. The techniques employed to study the aggregation behavior are fluoremetry, dynamic light scattering (DLS), and transmission electron microscopy (TEM) and the concentration range covered is 0–2?wt% [C₅mim][BF₄]. The probes, viz. pyrene and pyrene-1-carboxaldehyde (PyCHO), have been used for fluorescence analysis. According to the findings, the addition of pentyl-chained ionic liquid (IL) to aqueous TX-100 results in a dramatic increase in critical micelle concentration (cmc) decrease in micellar size, and aggregation number pointing toward an overall “unfavorable” aggregation process.     

Structure of aqueous solutions of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate by small-angle neutron scattering

The structure of aqueous solutions of a prototype ionic liquid, the short alkyl chain 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) has been investigated by small-angle neutron scattering. Concentration fluctuations and Kirkwood-Buff integrals have been calculated, and the results are in good agreement with corresponding data calculated herein from vapor pressure measurements. The large concentration fluctuations and Kirkwood-Buff integral values indicate that the system is in the vicinity of phase separation, which is known to occur some 20 K below room temperature, at a salt mole fraction of around 0.075.