Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

Spin-crossover in dimeric hydrogen-bonded iron(II) 2-(pyrazolyl)-pyridine and 2-(imidazolyl)-pyridine complexes

Five new hydrogen-bonded solvated iron(II) complexes of pyrazolyl- and imidazolyl-based N,N-chelating ligands have been synthesised. Water to ligand-NH hydrogen-bonded bridges occur in the pseudo-dimeric complexes {cis-[Fe(pypzH)₂(NCX)₂]₂(μ-OH₂)(H₂O)₂} · H₂O · MeOH (where X = S or Se), and in the chain complex {cis-[Fe(pypzH)₂(NCS)₂](μ-OH₂)}_n. A “half” spin-crossover (T_c = 125 K) was observed in the dimeric X = Se complex by means of magnetic measurements and no thermal hysteresis occurred between 4 and 300 K. The crystal structure at 123 K showed Fe–N distances consistent with the magnetism. Each Fe in the dimeric unit was structurally equivalent in the HS–LS state. Removal of the solvate molecules led to HS–HS behaviour over the temperature range 4–300 K. The pseudo-dimer with X = S also showed HS–HS behaviour as did the monomeric analogue cis-[Fe(pypzH)₂(NCS)₂]H₂O and a structurally different methanol-bridged dimer {cis-[Fe(pyimH)₂(NCS)₂]₂(μ-MeOH)₂} · 2MeOH (pypzH = 2-(1H-pyrazol-3-yl)-pyridine; pyimH = 2-(1H-imidazol-2-yl)-pyridine).     

Apparent molar heat capacities and apparent molar volumes of Pr(ClO4)3(aq), Gd(ClO4)3(aq), Ho(ClO4)3(aq), and Tm(ClO4)3(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa

Acidified aqueous solutions of Pr(ClO₄)₃(aq), Gd(ClO₄)₃(aq), Ho(ClO₄)₃(aq), and Tm(ClO₄)₃(aq) were prepared from the corresponding oxides by dissolution in dilute perchloric acid. Once characterized with respect to trivalent metal cation and acid content, the relative densities of the solutions were measured at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa using a Sodev O2D vibrating tube densimeter. The relative massic heat capacities of the aqueous systems were also determined, under the same temperature and pressure conditions, using a Picker Flow Microcalorimeter. All measurements were made on solutions containing rare earth salt in the concentration range 0.01 ⩽ m/(mol · kg⁻¹) ⩽ 0.2. Relative densities and relative massic heat capacities were used to calculate the apparent molar volumes and apparent molar heat capacities of the acidified salt solutions from which the apparent molar properties of the aqueous salt solutions were extracted by the application of Young's Rule. The concentration dependences of the isothermal apparent molar volumes and heat capacities of each aqueous salt solution were modelled using Pitzer ion-interaction equations. These models produced estimates of apparent molar volumes and apparent molar heat capacities at infinite dilution for each set of isothermal V_φ,2 and C_pφ,2 values. In addition, the temperature and concentration dependences of the apparent molar volumes and apparent molar heat capacities of the aqueous rare earth perchlorate salt solutions were modelled using modified Pitzer ion-interaction equations. The latter equations utilized the Helgeson, Kirkham, and Flowers equations of state to model the temperature dependences (at p=0.1 MPa) of apparent molar volumes and apparent molar heat capacities at infinite dilution. The results of the latter models were compared to those previously published in the literature.Apparent molar volumes and apparent heat capacities at infinite dilution for the trivalent metal cations Pr³⁺(aq), Gd³⁺(aq), Ho³⁺(aq), and Tm³⁺(aq) were calculated using the conventions V₂^∘(H⁺(aq)) ≡ 0 and C_p2^∘(H⁺(aq)) ≡ 0 and have been compared to other values reported in the literature.     

The dimeric unit [La(H2O)4(m-PO3C6H4COOH)(m-PO2(OH)C6H4COOH)(m-PO(OH)2C6H4COOH)]2 as building block of layered hybrid material

A new hybrid organic–inorganic material with the structural formula unit [La(H₂O)₄(m-PO₃C₆H₄COOH)(m-PO₂(OH)C₆H₄COOH)(m-PO(OH)₂C₆H₄COOH)]₂ (or [La(H₂O)₄C₂₁H₁₈O₁₅P₃]₂) has been synthesized under hydrothermal condition from La(NO₃)₃·6H₂O and 3-phosphonobenzoic acid (m-PO(OH)₂–C₆H₄–COOH) which is a rigid organic precursor possessing two types of functional groups: phosphonic acid and carboxylic acid. The two units of the produced hybrid are linked together by hydrogen bonds leading to a layered framework composing of by a repetition of inorganic and organic slices. The organic layers consist of dimeric units made of two meta-phosphono-benzoic acid linked together by hydrogen bonds involving their COOH groups. Two kinds of dimeric units are observed: PO₃C₆H₄COOH?HOOCC₆H₄PO(OH)₂, present 2 times in the structure, and PO₂(OH)C6H4COOH?HOOCC₆H₄PO₂(OH). The material crystallises in a monoclinic cell (C2/c (15) space group) with the following parameters: a = 42.515(4) Å, b = 7.4378(6) Å, c = 20.307(2) Å, β = 118.031(6)°, V = 5668.2(9) Å³, Z = 4, density = 1.908 g/cm³.     

Isopiestic determination of the osmotic and activity coefficients of Rb 2SO4 (aq) and Cs 2SO 4(aq) at T = (298.15 and 323.15) K,and representation with an extended ion-interaction (Pitzer) model

Isopiestic vapor-pressure measurements were made for Rb ₂SO ₄(aq) from molalitym =  (0.16886 to 1.5679 )mol · kg ^− 1atT =  298.15 K and from m =  (0.32902 to 1.2282 )mol · kg ^− 1at T =  323.15 K, and for Cs ₂SO₄ (aq) from m =  (0.11213 to 3.10815 )mol · kg ^− 1at T =  298.15 K and fromm =  (0.11872 to 3.5095 )mol · kg ^− 1atT =  323.15 K, with NaCl(aq) as the reference standard. Published thermodynamic information for these systems were reviewed and the isopiestic equilibrium molalities and dilution enthalpies were critically assessed and recalculated in a consistent manner. Values of the four parameters of an extended version of Pitzer`s model for osmotic and activity coefficients with an ionic-strength dependent third virial coefficient were evaluated for both systems at both temperatures, as were those of the usual three-parameter Pitzer model. Similarly, parameters of Pitzer`s model for the relative apparent molar enthalpies of dilution were evaluated at T =  298.15 K for both Rb ₂SO ₄(aq) and Cs ₂SO ₄(aq) for the more restricted range of m⩽ 0.101 mol · kg ^− 1. Values of the thermodynamic solubility product K_s(Rb₂ SO ₄, cr, 298.15 K )  =  (0.1392  ±  0.0154) and the CODATA compatible standard molar Gibbs free energy of formationΔ_fG_m^o (Rb ₂SO ₄, cr, 298.15 K )  =  − (1316.91  ±  0.59)kJ · mol ^− 1, standard molar enthalpy of formationΔ_fH_m^o (Rb ₂SO ₄, cr, 298.15 K )  =  − (1435.07  ±  0.60)kJ · mol ^− 1, and standard molar entropy S _m^o(Rb₂ SO ₄, cr, 298.15 K )  =  (199.60  ±  2.88)J · K ^− 1· mol ^− 1were derived. A sample of one of the lots of Rb ₂SO ₄(s) used for part of our isopiestic measurements was analyzed by ion chromatography, and was found to be contaminated with potassium and cesium in amounts that significantly exceeded the claims of the supplier. In contrast, analysis by ion chromatography of a lot of Cs ₂SO ₄(s) used for some of our experiments showed it was highly pure.     

Synthesis,crystal structure,spectroscopy and magnetism of a trinuclear nickel(II) complex with 3,5-pyrazoledicarboxylic acid as bridge ligands

A new complex of [Ni₃(dcp)₂(H₂O)₁₀] (1) (H₃dcp = 3,5-pyrazoledicarboxylic acid) has been synthesized from H₃dcp and Ni(NO₃)₂·6H₂O by hydrothermal reaction. Complex 1 has the discrete trinuclear structure. Three Ni(II) ions are bridged by two dcp³⁻ ligands, with 10 coordinated water molecules as terminal ligands. The molecules of [Ni₃(dcp)₂(H₂O)₁₀] extend into three-dimensional supramolecular architectures by intermolecular O–H···O hydrogen bonds as well as π-π stacking interactions. Magnetic susceptibility measurement shows that a weak antiferromagnetic interaction is operative between nickel(II) ions and an excellent simulation of the experimental data gives D = 5.27 cm⁻¹, J = −2.19 cm⁻¹ and g = 2.05.     

Two novel Keggin tungstocobaltates grafted by cobaltII complex group(s): K[Co(phen)2(H2O)]2[HCoW12O40]·2H2O and [Co(2,2′-bipy)3]1.5{[Co(2,2′-bipy)2(H2O)][HCoW12O40]}·0.5H2O

Two novel inorganic–organic hybrid compounds composed of Keggin tungstocobaltate framework and cobalt(II)–N coordination complexes, K[Co(phen)₂(H₂O)]₂[HCoW₁₂O₄₀]·2H₂O (1) (phen = 1,10-phenanthroline) and [Co(2,2′-bipy)₃]_1.5{[Co(2,2′-bipy)₂(H₂O)][HCoW₁₂O₄₀]·0.5H₂O (2) (bipy = bipyridine), have been synthesized under hydrothermal conditions by directly using Keggin POMs as starting materials, which were characterized by elemental analyses, IR, TG analyses and X-ray single crystal diffraction. Crystal data for compound 1: C₄₈H₄₁Co₃KN₈O₄₄W_12, triclinic, space group P-1, a = 10.918(5) Å, b = 13.401(5) Å, c = 13.693(5) Å, α = 69.291(5)°, β = 71.568(5)°, γ = 78.421(5)°, V = 1768.9(12) Å³, Z = 1; for compound 2: C₁₃₀H₁₀₄Co₇N₂₆O₈₃W_24, orthorhombic, space group, C2/c, a = 46.839(9) Å, b = 14.347(3) Å, c = 26.147(5) Å, α = β = γ = 90°, V = 17,570(6) Å³, Z = 4. Compound 1 exhibits a pseudo-1D chainlike structure, in which potassium ions act as linkages of Keggin unit doubly grafted by [Co(phen)₂(H₂O)] complex. Compound 2 represents a [Co(2,2′-bipy)₂(H₂O)]²⁺ mono-grafted Keggin tungstocobaltate derivative with 1.5[Co(2,2′-bipy)₃]²⁺ countercations. The cyclic voltammetric behavior of 1-CPE is similar to the parent 3-CPE, but the cyclic voltammetric behavior of Co^II shows a little difference. Variable-temperature magnetic susceptibility measurement of compound 1 demonstrates the presence of antiferromagnetic interactions.     

Synthesis,structure and thermochemical study of a cobalt energetic coordination compound incorporating 3,5-diamino-1,2,4-triazole and pyridine-2,6-dicarboxylic acid

An energetic coordination compound [Co₂(C₂H₅N₅)₂(C₇H₃NO₄)₂(H₂O)₂]·2H₂O (Hdatrz(C₂H₅N₅) = 3,5-diamino-1,2,4-triazole, H₂pda(C₇H₅NO₄) = pyridine-2,6-dicarboxylic acid) has been synthesized and characterized by elemental analysis, chemical analysis, IR spectroscopy, single-crystal X-ray diffraction and thermal analysis. X-ray diffraction analysis confirmed that the compound possessed a di-nuclear unit and featured a 3D super-molecular structure. Furthermore, a reasonable thermochemical cycle was designed based on the preparation reaction of the compound and the standard molar enthalpy of dissolution of reactants and products was measured by the RD496-2000 calorimeter. Finally, the standard molar enthalpy of formation of the compound was determined to be −(2475.0 ± 3.1) kJ · mol⁻¹ in accordance with Hess’s law. In addition, the specific heat capacity of the compound at T = 298.15 K was determined to be (1.13 ± 0.02) J · K⁻¹ · g⁻¹ by RD496-2000 calorimeter.     

Complexes derived from the copper(II) perchlorate/maleamic acid/2,2′-bipyridine and copper(II) perchlorate/maleic acid/2,2′-bipyridine reaction systems: Synthetic,reactivity, structural and spectroscopic studies

A systematic investigation of the reactions of Cu(ClO₄)₂ · 6H₂O with maleamic acid (H₂L) in the presence of 2,2′-bipyridine (bpy) has been carried out. The chemical and structural identity of the products depends on the solvent, the absence or presence of external hydroxides in the reaction mixture and the molar ratio of the reactants. Various reaction schemes have led to the isolation of the complexes [Cu₂(HL)₂(bpy)₂(H₂O)₂](ClO₄)₂ (1), [Cu₂(HL)₂(bpy)₂(H₂O)₂](ClO₄)₂ · 2H₂O (1 · 2H₂O), [Cu(L′′)(bpy)]_n · 2nH₂O (2 · 2nH₂O), [Cu₂(L′′)(bpy)₂(H₂O)₂]_n(ClO₄)_2n · 0.5nH₂O (3 · 0.5nH₂O), [Cu₂(L′′)₂(bpy)₂] · 2MeOH (5 · 2MeOH), [Cu₂(L′)₂(bpy)₂(ClO₄)₂] (6) and [Cu(ClO₄)₂(bpy)(MeCN)₂] (7b), where L′′^2? and L′^? are the maleate(?2) and monomethyl maleate(?1) ligands, respectively. The HL^? ion has been transformed to L′′^2? and L′^? in the known compounds 2 · 2nH₂O and 6, respectively, via metal ion-assisted processes involving hydrolysis (2 · 2nH₂O) and methanolysis (6) of the primary amide group. The reaction that leads to 6 takes place through the formation of the mononuclear complex [Cu(ClO₄)₂(bpy)(MeOH)₂] (7a), whose structure was assigned on the basis of its spectral similarity with the structurally characterized complex 7b. The structures of the cations in 1 and 1 · 2H₂O consists of two Cu^II atoms bridged by the carboxylate groups of the two HL^? ligands, each exhibiting the less common η² coordination mode; a chelating bpy molecule and a H₂O ligand complete square pyramidal coordination at each metal centre. The structure of the dinuclear repeating unit in the 1D coordination polymer 3 · 0.5nH₂O consists of two Cu^II atoms bridged by two syn,syn η¹:η¹:μ₂ carboxylate groups belonging to two L′′^2? ions; each ligand bridged two neighboring [Cu^II,II₂] units thus promoting the formation of a helical chain. The structure of the dinuclear molecule of complex 5 · 2MeOH consists of two Cu^II atoms bridged by two η² carboxylate groups from two L′′^2? ligands; the second carboxylate group of each maleate(?2) ligand is monodentately coordinated to Cu^II, creating a remarkable seven-membered chelating ring. The L′^? ion behaves as a carboxylate-type ligand in 6, with the carboxylate group being in the familiar syn,syn η¹:η¹:μ₂ coordination mode; a chelating bpy molecule and a coordinated ClO₄^? complete five-coordination at each Cu^II centre. The crystal structures of the complexes are stabilized by various H-bonding patterns. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

Piperazinium dihydrogen phosphate,C4H12N2(H2PO4)2: Synthesis, 31P CP/MAS NMR,structural and thermal investigations

A new piperazinium dihydrogen orthophosphate, C₄H₁₂N₂(H₂PO₄)₂ was discovered and characterized by combining information from X-ray diffraction, ³¹P CP/MAS NMR and thermal analysis (TG/DTA). The compound C₄H₁₂N₂(HPO₄)·H₂O, was also studied in order to compare these two similar materials. The hydrothermal stability is investigated for the system: 1.0 C₄H₁₀N₂: n H₃PO₄: 55–60 H₂O, 0.5 < n < 3. The reaction mixtures with pH in the range 1.6–8.4 were placed at a fixed temperature in the range 20–180 °C for ca. 5 days. C₄H₁₂N₂(H₂PO₄)₂ was obtained when n > ca. 2. A crystal of piperazinium dihydrogen phosphate, C₄H₁₂N₂(H₂PO₄)₂ was structurally investigated using X-ray diffraction: triclinic, space group $P\overline{1}$, a = 7.023(2), b = 7.750(3), c = 12.203(4) Å, α = 84.668(7), β = 81.532(7) and γ = 63.174(6)°, V = 586.0(4) Å³ and Z = 2. The reactivity of C₄H₁₂N₂(H₂PO₄)₂ was investigated by systematic solvothermal syntheses.     

Biological study and electrochemical characterization of Cu(II) and 1,8-bis-(2-pyridyl)-3,6-dithiaoctane (pdto) complex

Preliminary proliferation assays in human tumor cervix line HeLa, using the coordination compound [Cu(pdto)H₂O]²⁺ (pdto = 1,8-bis-(2-pyridyl)-3,6-dithiaoctane) and its precursors Cu(NO₃)₂ · 2.5H₂O and pdto, were carried out. The results showed that the copper complex has a behavior similar to that of the reference drug cis-platin. No biological activity for the non-coordinated ligand and the copper salt was found. It was established by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy, that the complex [Cu(pdto)H₂O]²⁺ presents an electrochemical reversible Cu(II)/Cu(I) reduction, in acetonitrile solution, meanwhile, the copper salt Cu(NO₃)₂ · 2.5H₂O exhibited an electrochemical irreversible behavior. A comparison between biological and electrochemical results corresponding to [Cu(pdto)H₂O]²⁺ and Cu(NO₃)₂ · 2.5H₂O let us to proposed, the electrochemical reversibility, as one important factor in the antitumoral activity of the copper complex. Due to the nature of the studies presented in this work, other factors like intercalation properties with DNA cannot be neglected in the antitumoral activity of the complex.     

Strong intramolecular ferromagnetic couplings in nickel(II) and copper(II) complexes chelated with tert-butyl 5-methoxy-2-pyridyl nitroxide

We successfully isolated a new paramagnetic bidentate ligand tert-butyl 5-methoxy-2-pyridyl nitroxide (meopyNO). Complexation of nickel(II) and copper(II) perchlorates with meopyNO gave the corresponding ML₂-type bis-chelated compounds. The magnetic studies showed that they were ground high-spin molecules with 2J/k_B = +288(5) and +178(3) K for [M(meopyNO)₂(H₂O)₂] · (ClO₄)₂ (M = Ni and Cu, respectively), where the spin Hamiltonian is defined as H = ?2J(S₁ · S₂ + S₂ · S₃). From the crystallographic analysis, the torsion angles (?) around M–O–N–C_2py were 4.2(3)° and 6.87(19)°, respectively, being so small that the orthogonality between the magnetic radical π1 and the metal dσ orbitals would be guaranteed.     

Synthesis of heteronuclear (MoRu2) clusters from 16-electron half-sandwich complexes (p-Cymene)Ru[E2C2(B10H10)] (E = S,Se)

The heterometallic cluster complexes {(p-Cymene)Ru[S₂C₂(B₁₀H₁₀)]}Mo(CO)₂{(CO)₃Ru[S₂C₂(B₁₀H₁₀)]} (2) and {(p-Cymene)Ru[Se₂C₂(B₁₀H₁₀)]}₂Mo(CO)₂ (3) (p-Cymene = η⁶-4-isopropyl-toluene) have been synthesized from the reactions of 16-electron half-sandwich ruthenium 1,2-dichalcogenolate carborane complexes (p-Cymene)Ru[E₂C₂(B₁₀H₁₀)] (E = S(1a), Se(1b)) with Mo(CO)₃(Py)₃ in the presence of BF₃ · Et₂O. The complexes of 2 and 3 were characterized by elemental analysis and IR, NMR spectra. The molecular structure of 2 has been characterized by single-crystal X-ray diffraction analysis. Complex 2 is unsymmetrical and the two Ru–Mo single bonds (2.7893(14), 2.8189(13) Å) are each supported by a symmetrically bridging o-carborane-1,2-dithiolato ligand.     

Thermodynamic study of the system (LiCl + CaCl2 + H2O)

Solubility isotherms of the ternary system (LiCl + CaCl₂ + H₂O) were elaborately determined at T = (283.15 and 323.15) K. Several thermodynamic models were applied to represent the thermodynamic properties of this system. By comparing the predicted and experimental water activities in the ternary system, an empirical modified BET model was selected to represent the thermodynamic properties of this system. The solubility data determined in this work at T = (283.15 and 323.15) K, as well as those from the literature at other temperatures, were used for the model parameterization. A complete phase diagram of the ternary system was predicted over the temperature range from (273.15 to 323.15) K. Subsequently, the Gibbs free energy of formation of the solid phases CaCl₂ · 4 H₂O_(s), CaCl₂ · 2 H₂O_(s), LiCl · 2H₂O_(s), and LiCl · CaCl₂ · 5H₂O_(s) was estimated and compared with the literature data.     

A calorimetric and thermodynamic investigation of A2[(UO2)2(MoO4)O2] compounds with A = K and Rb and calculated phase relations in the system (K2MoO4 + UO3 + H2O)

A calorimetric and thermodynamic investigation of two alkali-metal uranyl molybdates with general composition A₂[(UO₂)₂(MoO₄)O₂], where A = K and Rb, was performed. Both phases were synthesized by solid-state sintering of a mixture of potassium or rubidium nitrate, molybdenum (VI) oxide and gamma-uranium (VI) oxide at high temperatures. The synthetic products were characterised by X-ray powder diffraction and X-ray fluorescence methods. The enthalpy of formation of K₂[(UO₂)₂(MoO₄)O₂] was determined using HF-solution calorimetry giving Δ_fH° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = −(4018 ± 8) kJ · mol⁻¹. The low-temperature heat capacity, С_р°, was measured using adiabatic calorimetry from T = (7 to 335) K for K₂[(UO₂)₂(MoO₄)O₂] and from T = (7 to 326) K for Rb₂[(UO₂)₂(MoO₄)O₂]. Using these С_р° values, the third law entropy at T = 298.15 K, S°, is calculated as (374 ± 1) J · K⁻¹ · mol⁻¹ for K₂[(UO₂)₂(MoO₄)O₂] and (390 ± 1) J · K⁻¹ · mol⁻¹ for Rb₂[(UO₂)₂(MoO₄)O₂]. These new experimental results, together with literature data, are used to calculate the Gibbs energy of formation, Δ_fG°, for both phases giving: Δ_fG° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = (−3747 ± 8) kJ · mol⁻¹ and Δ_fG° (T = 298 K, Rb₂[(UO₂)₂(MoO₄)], cr) = −3736 ± 5 kJ · mol⁻¹. Smoothed С_р°(Т) values between 0 K and 320 K are presented, along with values for S° and the functions [H°(T) − H°(0)] and [G°(T) − H°(0)], for both phases. The stability behaviour of various solid phases and solution complexes in the (K₂MoO₄ + UO₃ + H₂O) system with and without CO₂ at T = 298 K was investigated by thermodynamic model calculations using the Gibbs energy minimisation approach.     

Thermochemistry of some barium compounds

The molar enthalpies of reaction of metallic barium with 0.047 mol·dm⁻³ HClO₄ as well as the molar enthalpies of dissolution of BaCl₂ in 1.01 mol·dm⁻³ HCl and in water have been measured at T=298.15 K in a sealed swinging calorimeter with an isothermal jacket. From these results the standard molar enthalpy of formation of the barium ion in an aqueous solution at infinite dilution, as well as the enthalpies of formation of barium chloride and barium perchlorate, are calculated to be: Δ_fH⁰_m(Ba²⁺,aq)=−(535.83±1.25) kJ · mol⁻¹; Δ_fH⁰_m(BaCl₂,cr)=−(855.66±1.28) kJ · mol⁻¹; and Δ_fH⁰_m(BaClO₄,cr)=−(796.26±1.35) kJ · mol⁻¹. The results obtained are discussed and compared with previous experimental values.     

Fast tunneling Jahn–Teller isomer of the [Mn12O12(O2CC6H4-2-CH3)16(H2O)4] · S single-molecule magnet

The single-crystal X-ray structure of the single-molecule magnet [Mn₁₂O₁₂(O₂CC₆H₄-2-CH₃)₁₆(H₂O)₄] · CH₂Cl₂ · 2H₂O (complex 1) is reported. Complex 1 is a new example of a “Jahn–Teller isomer”, since it has two Mn(III) ions with abnormally oriented Jahn–Teller elongation axes. Complex 1 has a lower activation energy (U_eff = 29 K) for magnetization reversal relative to other reported [Mn₁₂O₁₂] type molecules (e.g., U_eff = 70 K for Mn₁₂Ac). Single-crystal low temperature magnetization measurements are reported that confirm that complex 1 is a single-molecule magnet. High-field electron paramagnetic resonance measurements were performed on a single crystal to give the spin Hamiltonian parameters.     

The thermodynamics of formation,molar heat capacity,and thermodynamic functions ofZrTiO4(cr)

As part of an ongoing study of titanate-based ceramic materials for the disposal of surplus weapons-grade plutonium, we report thermodynamic properties of a sample ofzirconium titanate (ZrTiO₄) quenched from a high-temperature synthesis. The standard enthalpy of formationΔ_fH_m^o was obtained by using high-temperature oxide-melt solution calorimetry. The molar heat capacity C_{p, m}was measured fromT =  13 K to T =  400 K in an adiabatic calorimeter and extrapolated toT =  1800 K by using an equation fitted to the low-temperature results. The results atT =  298.15 K areΔ_fH_m^o =  − (2024.1  ±  4.5)kJ · mol ^− 1,Δ₀^TS_m^o =  (116.71  ±  0.31 )J · K ^− 1· mol ^− 1, andΔ_fG_m^o =  − (1915.8  ±  4.5 )kJ · mol ^− 1; the molar entropy includes a contribution of 2 R ln2 to account for the random mixing of Zr^4 + and Ti^4 + on a four-fold crystallographic site. Values for the standard molar Gibbs energies and enthalpies of formation of ZrTiO_4,Δ_fG_m^oandΔ_fH_m^o , and for the free energies and enthalpies for the reaction to form ZrTiO₄(cr) from ZrO₂(cr) and TiO₂(cr), are tabulated over the temperature interval, 0 ⩽(T / K)⩽ 1800. From these results, we conclude that ZrTiO₄is not stable with respect to (ZrO₂ +  TiO₂) at T =  298.15 K, but becomes so at T =  (1250  ±  150) K.     

Study of bromide salts solubility in the (m1NaBr + m2MgBr2)(aq) system at T = 323.15 K. Thermodynamic model of solution behavior and (solid + liquid) equilibria in the (Na + K + Mg + Br + H2O) system to high concentration and temperature

The bromide minerals solubility in the mixed system (m₁NaBr + m₂MgBr₂)(aq) have been investigated at T = 323.15 K by the physico-chemical analysis method. The equilibrium crystallization of NaBr·2H₂O(cr), NaBr(cr), and MgBr₂·6H₂O(cr) has been established. The solubility-measurements results obtained have been combined with all other experimental equilibrium solubility data available in literature at T = (273.15 and 298.15) K to construct a chemical model that calculates (solid + liquid) equilibria in the mixed system (m₁NaBr + m₂MgBr₂)(aq). The solubility modeling approach based on fundamental Pitzer specific interaction equations is employed. The model gives a very good agreement with bromide salts equilibrium solubility data. Temperature extrapolation of the mixed system model provides reasonable mineral solubility at high temperature (up to 100 °C). This model expands the previously published temperature variable sodium–potassium–bromide and potassium–magnesium–bromide models by evaluating sodium–magnesium mixing parameters. The resulting model for quaternary system (Na + K + Mg + Br + H₂O) is validated by comparing solubility predictions with those given in literature, and not used in the parameterization process. Limitations of the mixed solution models due to data insufficiencies at high temperature are discussed.     

Structural characterization,molecular dynamics,dielectric and spectroscopic properties of tetrakis(pyrazolium) bis(μ2-bromo-tetrabromobismuthate(III)) dihydrate, [C3N2H5]4[Bi2Br10]·2H2O

The structure of [C₃N₂H₅]₄[Bi₂Br₁₀]·2H₂O, (PBB) was determined by single crystal X-ray diffraction at 100 K. It crystallizes in the monoclinic space group C2/m, with a = 12.992(4) Å, b = 16.326(5) Å, c = 8.255(3) Å, β = 108.56°(3), V = 1659.9(9) Å³ and Z = 2. The structure consists of discrete binuclear [Bi₂Br₁₀]⁴⁻ anions, ordered pyrazolium cations and water molecules. The crystal packing is governed by strong N–H⋯O and weak O–H⋯Br hydrogen bonds. A sequence of structural phase transitions in PBB was established on the basis of differential scanning calorimetry and dilatometric studies. Two reversible first-order phase transitions were found: (I → II) at 381/371 K (on heating/cooling) and (II → III) at 348/338 K. Dielectric response near both phase transitions is characteristic of crystals with the “plastic-like” phases. Over the phase III a low frequency dielectric relaxator is disclosed. The possible molecular motions in the PBB compound are characterized by the ¹H NMR studies. The infrared spectra of polycrystalline compound in the temperature range 300–380 K are reported for the region 4000–400 cm⁻¹. The observed spectral changes through the structural phase transition III → II are attributed to an onset of motion both of the pyrazolium cations and water molecules.