Thermodynamic study of (heptane + amine) mixtures. II. Excess and partial molar volumes at 298.15 K

Excess molar volumes V^E at 298.15 K were determined by means of a vibrating tube densimeter for binary mixtures of heptane + primary n-alkyl (C₃ to C₁₀) and branched amines (iso-propyl-, iso-, sec-, and tert-butyl-, iso-, tert-pentyl-, and pentan-3-amine) in the whole composition range. The apparent molar volumes of solid dodecyl- and tetradecylamine in heptane dilute solution were also determined. The V^E values were found positive for mixtures involving C₃ to C₈ linear amines, with V^E decreasing with chain lengthening. Heptane + nonyl and decylamine showed s-shaped, markedly asymmetric, curves. Mixtures with branched C₃ to C₅ amines displayed positive V^E’s larger than those observed in the mixtures of the corresponding linear isomers. Partial molar volumes V° at infinite dilution in heptane were evaluated for the examined amines and compared with those of alkanes and alkanols taken from the literature. An additivity scheme, based on the intrinsic volume approach, was applied to estimate group (CH₃, CH₂, CH, C, NH₂, and OH) contributions to V°. The effect of branching on V° and the limiting slope of the apparent excess molar volumes were evaluated and discussed in terms of solute–solvent and solute–solute interactions.     

Thermodynamic study of heptane + secondary, tertiary and cyclic amines mixtures. Part IV. Excess and solvation enthalpies at 298.15 K

Partial molar enthalpies and excess enthalpies H^E of binary mixtures of heptane + secondary and tertiary n-alkyl, primary cycloalkyl, and secondary (hetero)cyclic amines have been determined at 298.15 K by isothermal titration calorimetry in the whole composition range. All mixtures showed positive H^E values which decrease with increasing amine size in each category, and decrease in the order cyclic primary > cyclic secondary > linear primary [1] > secondary > tertiary when comparing amines of similar size in different categories. From partial molar enthalpies at infinite dilution and known enthalpies of vaporization, the solvation enthalpies have been calculated either for heptane in amines and for amines in heptane. These quantities, together with their cavitational and interactional terms obtained applying the scaled particle theory, are discussed to get insight into the types and relative strength of solute-solvent interactions and into their effects on molecular structure features such as branching and cyclization.     

Excess molar volumes and partial molar volumes for (propionitrile + an alkanol) at T = 298.15 K and p = 0.1 MPa

The excess molar volumes and the partial molar volumes for (propionitrile + an alkanol) at T = 298.15 K and at atmospheric pressure are reported. The hydrogen bonding between the OH⋯NC groups are discussed in terms of the chain length of the alkanol. The alkanols studied are (methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and 1-pentanol).The excess molar volume data was fitted to the Redlich–Kister equation The partial molar volumes were calculated from the Redlich–Kister coefficients.     

Excess molar volumes and excess molar enthalpies of binary mixtures for 1,2-dichloropropane + 2-alkoxyethanol acetates at 298.15 K

The excess molar volumes and excess molar enthalpies over the whole range of composition have been measured for the binary mixtures formed by 1,2-dichloropropane (1,2-DCP) with three 2-alkoxyethanol acetates at 298.15 K and atmospheric pressure using a digital vibrating-tube densimeter and an isothermal calorimeter with flow-mixing cell, respectively. The 2-alkoxyethanol acetates are ethylene glycol monomethyl ether acetate (EGMEA), ethylene glycol monoethyl ether acetate (EGEEA), and ethylene glycol monobutyl ether acetate (EGBEA). The of the mixture has been shown positive for EGMEA, ‘S-shaped’ for EGEEA, being negative at low and positive at high mole fraction of 1,2-DCP, and negative for EGBEA. All the values for the above mixtures showed an exothermic effect (negative values) which increase with increase in carbon number of the 2-alkoxyethanol acetates, showing minimum values varying from −374 J mol⁻¹ (EGMEA) to −428 J mol⁻¹ (EGBEA) around 0.54–0.56 mol fraction of 1,2-DCP. The experimental results of and were fitted to Redlich–Kister equation to correlate the composition dependence of both excess properties. In this work, the experimental excess enthalpy data have been also correlated using thermodynamic models (Wilson, NRTL, and UNIQUAC) and have been qualitatively discussed.     

Excess molar volumes of (an alkane + 1-chloroalkane) atT = 298.15 K

The densities of the following: (pentane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (hexane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (heptane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (octane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), were measured at T =  298.15 K by means of a vibrating-tube densimeter. The excess molar volumes V_m^E, calculated from the density data, are negative for (pentane  +  1-chloropentane, or 1-chlorohexane) and (hexane  +  1-chlorohexane) over the entire range of composition. (Pentane  +  1-chlorobutane), (hexane  +  1-chloropentane) and (heptane  +  1-chlorohexane) exhibit an S-shapedV_m^E dependence. For all the other systems,V_m^E is positive. The V_m^Eresults were correlated using the fourth-order Redlich–Kister equation, with the maximum likelihood principle being applied for determining the adjustable parameters.     

Excess molar volumes,and excess molar enthalpies of (N-methyl-2-pyrrolidinone + an ether ) at the temperature 298.15 K

Excess molar volumes V_m^E have been calculated from measured density values over the whole composition range at T =  298.15 K and atmospheric pressure for six { N -methyl-2-pyrrolidinone  +  1,1-dimethylethyl methyl ether, or dipropyl ether, or 1,1-dimethylpropyl methyl ether, or diisopropyl ether, or dibutyl ether, or dipentyl ether}. Excess molar enthalpiesH_m^E were also measured for five { N -methyl-2-pyrrolidinone  +  1,1-dimethylethyl methyl ether, or dipropyl ether, or 1,1-dimethylpropyl methyl ether, or diisopropyl ether, or dibutyl ether} at T =  298.15 K and atmospheric pressure. The results are discussed in terms of intermolecular associations. The experimental results have been correlated with the UNIQUAC and NRTL equations.     

Excess molar enthalpies of (methanol + 1-propanol) + oxane or 1,4-dioxane mixtures at the temperature 298.15 K

Experimental excess molar enthalpies H_m^E at the temperature 298.15 K and atmospheric pressure in a flow microcalorimeter are reported for the ternary mixtures: {x₁CH₃OH+x₂C₂H₅OH+(1−x₁−x₂)C₅H₁₀O} and {x₁CH₃OH+x₂C₂H₅OH+(1−x₁−x₂)C₄H₈O₂}. The results have been correlated by means of a polynomial equation and used to construct constant excess enthalpy contours. Further, the results have been compared with those calculated from a UNIQUAC associated-solution model taking into consideration the molecular association of like alcohols, solvation between unlike alcohols and alcohols with oxane (tetrahydropyran) or 1,4-dioxane using only binary information.     

Excess molar enthalpies and excess molar volumes of (1,3-dimethyl-2-imidazolidinone + an aromatic hydrocarbon) atT = 298.15 K

Excess molar enthalpies H_m^Eand excess molar volumesV_m^E of (1,3-dimethyl-2-imidazolidinone  +  benzene, or methylbenzene, or 1,2-dimethylbenzene, or 1,3-dimethylbenzene, or 1,4-dimethylbenzene, or 1,3,5-trimethylbenzene, or ethylbenzene) over the whole range of compositions have been measured at T =  298.15 K. The excess molar enthalpy values were positive for five of the seven systems studied and the excess molar volume values were negative for six of the seven systems studied. The excess enthalpy ranged from a maximum of 435 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  1,3,5-trimethylbenzene) to a minimum of  − 308 J · mol ^− 1for (1,3-dimethyl-2-imidazoline  +  benzene). The excess molar volume values ranged from a maximum of 0.95cm³mol ^− 1 for (1,3-dimethyl-2-imidazoline  +  ethylbenzene) and a minimum of  − 1.41 cm³mol ^− 1for (1,3-dimethyl-2-imidazoline  +  methylbenzene). The Redlich–Kister polynomial was used to correlate both the excess molar enthalpy and the excess molar volume data and the NRTL and UNIQUAC models were used to correlate the enthalpy of mixing data. The NRTL equation was found to be more suitable than the UNIQUAC equation for these systems. The results are discussed in terms of the polarizability of the aromatic compound and the effect of methyl substituents on the benzene ring.     

Thermodynamic study of mixtures containing dibromomethane. II: volumes and enthalpies at 298.15 K

Journal of Thermal Analysis and Calorimetry - Excess molar volumes, VE, of binary mixtures of dibromomethane (DBM) with n-hexane, n-heptane, n-octane, cyclohexane, tetrachloromethane, dipropyl and...     

Excess molar enthalpies of ternary mixtures (dibutyl ether or dipropyl ether + 2,2-dimethylbutane + 2,3-dimethylbutane) at the temperature 298.15 K

Excess molar enthalpies, measured at the temperature 298.15 K and atmospheric pressure conditions by means of a flow microcalorimeter, are reported for the ternary mixtures {x₁(dibutyl ether or dipropyl ether) + x₂ 2,2-dimethylbutane + (1 ? x₁ ? x₂) 2,3-dimethylbutane}. A smooth representation of the results is described and the constant-enthalpy contours for each ternary system are displayed on the respective Roozeboom diagrams. The results serve to show that good estimates of the excess molar enthalpies of the ternary systems can be obtained from the Liebermann–Fried model by using the physical properties of the constituent pure components and the parameters determined from the binary mixtures of these components.     

(Liquid + liquid) equilibria of three ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), (heptane + xylene + N-formylmorpholine) from T = (298.15 to 353.15) K

(Liquid + liquid) equilibrium (LLE) data for ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), and (heptane + xylene + N-formylmorpholine) have been determined experimentally at temperatures ranging from 298.15 K to 353.15 K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The universal quasichemical activity coefficient (UNIQUAC) and the non-random two liquids equation (NRTL) were used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that UNIQUAC and NRTL used for LLE could provide a good correlation. Distribution coefficients, separation factors, and selectivity were evaluated for the immiscibility region.     

Excess molar enthalpies of the ternary mixtures: (tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-octane) at the temperature 298.15 K

Microcalorimetric measurements of excess enthalpies at the temperature T = 298.15 K are reported for the two ternary mixtures {x₁(C₄H₈O or C₅H₁₀O) + x₂C₅H₁₂O + x₃C₈H₁₈}. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that good estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

Excess molar enthalpies for (benzonitrile + an aromatic hydrocarbon) atT = 298.15 K

The excess molar enthalpies of (benzonitrile  +  benzene, or methylbenzene, or 1,2-dimethylbenzene, or 1,3-dimethylbenzene, or 1,4-dimethylbenzene, or 1,3,5-trimethylbenzene, or ethylbenzene) have been determined at T =  298.15 K. The excess molar enthalpies range from  − 10 J · mol ^− 1for methylbenzene to 130 J · mol ^− 1for 1,3,5-trimethylbenzene. The Redlich–Kister equation, the NRTL, and UNIQUAC models were used to correlate the data. The results indicate a relatively strong association between benzonitrile and each of the aromatic compounds, decreasing with increasing methyl substitution on the benzene moiety.     

Excess molar enthalpies and excess molar volumes of (an alkanol + a nitrile compound) atT = 298.15 K andp = 0.1 MPa

Excess molar enthalpies and excess molar volumes at T =  298.15 K andp =  0.1 MPa are reported for (methanol, or ethanol, or 1-propanol  +  1,4-dicyanobutane, or butanenitrile, or benzonitrile). For all the mixtures investigated in this work the excess molar enthalpy is large and positive. The excess molar enthalpy decreases as the carbon chain number of the alkanol species increases from methanol to propanol. The excess molar volumes are both positive and negative. The Extended Real Associated Solution and the Flory–Benson–Treszczanowicz models were used to represent the data. Both these models describe better the excess molar enthalpy than the excess molar volumes of (an alkanol  +  a nitrile compound).