窗口傅里叶变换轮廓术中窗口尺度选取的改进

多尺度窗口傅里叶变换法根据条纹信号的瞬时频率梯度来确定信号的局域平稳长度,再由局域平稳长度来控制窗口的尺度,即窗口的尺度和局域平稳长度成正比。使用多尺度窗口傅里叶变换法来使条纹信号的频谱局域化,可以在条纹信号的频率分辨率和空间分辨率之间达到一种较佳的调和。针对多尺度窗口傅里叶变换三维形貌测量技术中局域平稳长度提取算法的不足进行了改进,使窗口尺度的选取更具合理性,对变形光栅基频提取更精确,进一步减小了位相测量的误差。给出了理论分析、计算机模拟以及实验结果。     

三维测量中一种新的自适应窗口傅里叶相位提取法

针对多尺度窗口傅里叶变换中,窗口尺寸的自适应选取及提取基频时的频谱混叠等问题,提出基于希尔伯特-黄变换(HHT)的自适应窗口傅里叶相位提取法。对变形条纹信号进行HHT后,通过谱分析,自适应确定能够准确描述条纹信号变化情况的瞬时频率及条纹图的背景分量。根据所得的瞬时频率,给出自适应定位条纹信号局部平稳区域的步骤,进而确定窗口尺寸。不需额外计算,可有效去除背景分量以减少基频提取过程中零频频谱的干扰。与现有的用最大脊法确定窗口尺寸的方法相比,本方法不受被测相位必须线性逼近且变化缓慢的前提约束。实验证明本方法有效、可行,且对测量携带陡峭边缘或面形复杂的物体也能进行较为精确有效的测量。     

Applications of windowed Fourier fringe analysis in optical measurement: A review

The applications of windowed Fourier fringe analysis in the past decade are reviewed. Because fringe patterns from different optical measurement systems are similar, the reviewed applications are classified according to the functions of the windowed Fourier transform being used in fringe pattern analysis: denosing exponential phase fields, demodulating carrier fringe patterns, getting phase derivatives, and utilizing local properties. From these applications, the windowed Fourier transform is shown to be effective and versatile for fringe pattern analysis.     

基于窗口傅里叶变换剪切干涉法波前检测

提出了一种利用二维窗口傅里叶变换从径向剪切干涉条纹中准确得到波前的重建技术。首先对剪切干涉条纹做二维窗口傅里叶变换,设置阈值和频率积分范围后,进行二维窗口傅里叶逆变换,然后对包裹相位做去载频和相位展开处理得到相位差分布,最后使用波前迭代算法从相位差中复原实际波前。模拟计算表明,使用该方法最大相位复原误差为0.82%,均方根值为0.020 9 rad,实验结果验证了该方法的有效性。同时也对窗口傅里叶变换的关键参数,如窗函数的选择、窗口大小的确定以及阈值的选取等进行了简要讨论。与传统傅里叶变换法(FFT)相比,基于窗口傅里叶变换的剪切干涉波前检测法有更高的精度和稳定性,为波前检测提供一种新的处理方法。     

Generalized three-dimensional windowed Fourier transform for fringe analysis

A 3D windowed Fourier transform is proposed for fringe sequence analysis, which processes the joint spatial and temporal information of the fringe sequence simultaneously. The 2D windowed Fourier transform in the spatial domain and the 1D windowed Fourier transform in the temporal domain are two special cases of the proposed method. The principles of windowed Fourier filtering and windowed Fourier ridges are developed. Experimental verification shows encouraging results despite a longer processing time.     

Method for eliminating zero spectrum in Fourier transform profilometry

Windowed Fourier transform (FT) is introduced into Fourier transform profilometry (FTP) to extract zero component included in deformed fringe pattern without capturing two fringe patterns with π phase difference. First, we extract zero component of deformed fringe image using windowed FT and normalize it, then calculate the normalized Fourier spectra of deformed fringe image, finally subtract the zero component from Fourier spectra of deformed fringe image. We give the theoretical analysis of the proposed method. The experiment is carried out to demonstrate that the method can eliminate zero component and extend the measurable slope of height variation to nearly three times of the conventional FTP.     

An improved windowed Fourier transform for fringe demodulation

A modified algorithm of windowed Fourier transform (WFT) for phase retrieval from electronic speckle-shearing fringe patterns with carriers is proposed. The algorithm is based on the introduction of a fast Fourier transform (FFT) in WFT to reduce computation time for fringe demodulation. Since boundary effects in FFT will influence the accuracy of phase retrieval, the Gerchberg method is employed to extrapolate the fringe pattern at the boundaries to reduce boundary effects. A theoretical analysis of the algorithm is presented. Both simulated and experimental results show that the proposed method has reduced the computation time significantly compared with the convolution method of WFT without sacrificing measurement accuracy.     

On window size selection in the windowed Fourier ridges algorithm: Addendum

The windowed Fourier transform is a useful technique for fringe pattern analysis. It has been shown that the proper selection of the window size is a balance between the linear phase approximation error and the influence of noise [Q. Kemao, On widow size selection in windowed Fourier ridges algorithm. Opt Lasers Eng, 2007, accepted for publication]. Since the fringe intensity and noise level usually vary spatially, the window size should also be spatially adaptive in order to reach a good balance for each pixel of the fringe pattern. This addendum first shows that the windowed Fourier transform with a spatially fixed window size (SFWS) is still practically useful and then discusses the window size competition strategies for the windowed Fourier transform with a spatially adaptive window size (SAWS). The windowed Fourier transform with a SAWS is theoretically better than that with a SFWS but it is also more challenging in use. The windowed Fourier ridges algorithm is used for analysis throughout this paper. This analysis is also applicable to the windowed Fourier filtering algorithm.     

Windowed Fourier assisted two-dimensional Hilbert transform for fringes phase extraction

In this article, two-dimensional windowed Fourier assisted Hilbert transform for fringes phase extraction has been proposed. The mathematical derivations of the filtered fringes image and its Hilbert transformations are presented using windowed Fourier transform. The proposed method has been verified by calculating the wrapped and unwrapped phase of the experimental moire fringes. In comparison to the conventional fringes phase extraction methods, the proposed method is found to be effective.     

Windowed Fourier transform profilometry based on improved S-transform

A novel method for windowed Fourier transform (WFT) profilometry is presented. This method is based on improved S-transform. The impact of the second order derivative of the phase (φ^'(b)) to the ridge of S-transform is derived, and how to estimate this deviation is discussed. An important conclusion that more accurate instantaneous frequency can be obtained after removing this deviation is shown. Thus, an accurate phase map of the fringe pattern is obtained by using the WFT based on the window size map, and this map is related to the instantaneous frequency. The method is compared with the WFT based on the wavelet transform. A numerical simulation and experimental example have shown its validity in practical applications.     

Parallel computing for fringe pattern processing: A multicore CPU approach in MATLAB environment

In the process of measurements such as optical interferometry and fringe projection, an important stage is fringe pattern analysis. Many advanced fringe analysis algorithms have been proposed including regularized phase tracking (RPT), partial differential equation based methods, wavelet transform, Wigner–Ville distribution, and windowed Fourier transform. However, most of those algorithms are computationally expensive. MATLAB^® is a general algorithm development environment with powerful image processing and other supporting toolboxes. It is also commonly used in photomechanical data analysis. With rapid development of multicore CPU technique, using multicore computer and MATLAB^® is an intuitive and simple way to speed up the algorithms for fringe pattern analysis. The paper introduces two acceleration approaches for fringe pattern processing. The first approach is task parallelism using multicore computer and MATLAB^® parallel computing toolbox. Since some algorithms are embarrassing problems, our first approach makes use of this characteristic to parallelize these algorithms. For this approach, parallelized windowed Fourier filtering (WFF) algorithm serves as an example to show how parallel computing toolbox accelerates the algorithm. Second, data parallelism using multicore computer and MATLAB^® parallel computing toolbox is proposed. A high level parallel wrapping structure is designed, which can be used for speeding up any local processing algorithms. WFF, windowed Fourier ridges (WFR), and median filter are used as examples to illustrate the speedup. At last, the results show that the parallel versions of former sequential algorithm with simple modifications achieve the speedup up to 6.6 times.     

Two-dimensional windowed Fourier transform for fringe pattern analysis: Principles, applications and implementations

Fringe patterns from optical metrology systems need to be demodulated to get the desired parameters. Two-dimensional windowed Fourier transform is chosen for the determination of phase and phase derivatives. Two algorithms, one based on filtering and the other based on similarity measure, are developed. Some applications based on these two algorithms are explored, including strain determination, phase unwrapping, phase-shifter calibration, fault detection, edge detection and fringe segmentation. Various examples are given to demonstrate the ideas. Finally implementations of these algorithms are addressed. Most of the work has appeared in various papers and its originality is not claimed. Instead, this paper gives an overview and more insights of our work on windowed Fourier transform.     

Phase retrieval of optical fringe patterns from the ridge of a wavelet transform

A new method for phase retrieval of optical fringe patterns is presented. This method is based on a wavelet transform and is capable of extracting the full 2D phase distribution from a single fringe pattern. An important conclusion that the phase of the optical fringe pattern is equal to the phase of its wavelet transform on the ridge of the wavelet transform is theoretically clarified. The method is compared with the Fourier transform and the integration methods. A numerical simulation and an experimental example of phase retrieval are shown.     

基于S变换的改进窗口傅里叶三维测量法

讨论了一维S变换在处理条纹图中的应用,推导了S变换表达式,提出一种基于S变换脊的自适应窗口傅里叶三维测量法。利用S变换对于频率的敏感性以及S变换脊思想,求得任意点的瞬时频率。推导了在相位跳变剧烈区域相位二阶导φ″(b)对S变换脊的影响,并求得去除此影响后更为准确的瞬时频率。然后将瞬时频率倒数作为经典窗口傅里叶变换(WFT)的窗口大小,解出条纹图的精确相位。最后对去除相位二阶导影响前后基于S脊的WFT进行对比仿真;实验验证其与传统基于小波脊的WFT在抗噪声、解相位精度上的优势。     

Phase retrieval of speckle fringe pattern with carriers using 2D wavelet transform

A novel two-dimensional (2D) Gabor continuous wavelet transform (CWT) for phase retrieval and fringe filtering of speckle fringe patterns with spatial carriers is proposed. Theoretical analysis of 2D Gabor CWT is presented and results are compared with advanced fan 2D CWT using both the computer simulated and experimental speckle fringe patterns. It is shown that noise reduction by 2D Gabor CWT demonstrates better results than that of the advanced fan 2D CWT. Two-dimensional Gabor CWT is also compared with 2D Fourier transform and results show that 2D Gabor CWT algorithm has better noise immunity.     

Neural network applied to reconstruction of complex objects based on fringe projection

The neural network has been introduced into the reconstruction of the complex object based on fringe projection. In this method, the neural network with powerful property of approximation is used to get the continuous approximate function of a discrete fringe pattern captured by an image frame grabber. The depth-related phase of the measured object modulated into the fringe pattern can be demodulated by dealing with the approximate function. Compared with the Fourier transform profilometry (FTP), in the network method, one deformed fringe pattern is needed to reconstruct the tested object, and a high spatial resolution is maintained for no filtering process. Therefore, this method performs better than FTP in the measurement of the complex object. Moreover, the network method is capable of demodulating more depth-related phase even in the case that the local shadow exists in the fringe pattern. Computer simulations and experiments validate the feasibility of this method.     

Eliminating the zero spectrum in Fourier transform profilometry using a two-dimensional continuous wavelet transform

In this paper, a filtering technique based upon two-dimensional continuous wavelet transform (2D-CWT) is used to eliminate the low frequency components of fringe patterns. The filtered fringe patterns are subsequently demodulated using a standard Fourier transform profilometry (FTP) algorithm. This image pre-filtering stage improves the noise performance of the FTP algorithm and enables the FTP method to demodulate fringe patterns with larger bandwidths. Also, the 2D-CWT technique reduces speckle noise significantly. Moreover, only a single fringe pattern is required in this technique. The 2D-CWT algorithm is capable of separating low frequency terms from the high frequency terms that contain phase-modulated fringe information, even when both interfere, greatly, in the frequency domain. The proposed algorithm is tested, both via computer simulation and using real fringe patterns. This revealed the robustness of this algorithm and also demonstrably enables the demodulation of a wider range of fringe patterns using the FTP technique.     

基于傅里叶变换解相法的像增强管多参数测量

 提出一种基于傅里叶变换解相法的像增强管成像质量多参数同时测量的新方法。将一正弦光栅图输入到像增强管,如果像增强管成像质量存在问题,将使图像输出发生改变,形成一变形条纹,采用傅里叶变换解相法对输出的变形条纹进行解相,可同时获得放大率、放大率不均匀度、枕形畸变、桶形畸变、蛇形畸变、剪切畸变等相关信息,对测量系统进行标定,即可实现对上述参数的同时测量。实验测得中心放大率与设定放大率的差值到了10-3量级,测得的畸变和畸变真值两者差异在0.4 pixel以内,结果证明了方法的有效性。     

基于Gabor滤波的散斑条纹图平滑方法

提出了一种基于伽博(Gabor)滤波的散斑条纹图平滑方法.通过加窗傅里叶运算提取散斑条纹图的条纹频率和条纹梯度方向,并利用它们确定具有频率和方向选择性的Gabor滤波器对散斑条纹图进行Gabor滤波.数值模拟和实验结果表明,该方法在滤除散斑噪声的同时能够有效的保留散斑条纹图的条纹结构,为从单幅散斑条纹图中进一步提取条纹相位场奠定了良好的基础.