X-ray scattering for the determination of fat content in dairy products

The scattering of X-rays from biological samples has been shown to produce characteristic profiles, which depend on their molecular structure. The highly ordered fat molecules in an adipose tissue result in a relatively sharp scattering peak at 1.1 nm^?1 with a scattering profile, which is considerably different from the scattering profile of a water-rich tissue. The latter is characterized by a broad scattering peak at about 1.6 nm^?1. A biological sample consisting of a mixture of both adipose and a water-rich tissue is expected to show a scattering profile, which is directly linked to the relative contribution of each component and would reflect the percentage by volume of each component in the mixture. In this work, X-ray scattering profiles of a number of dairy products and water are measured. The values of two selected X-ray scattering characterization parameters (I₁/I₂% and areas A₁/A₂% of the scattering peaks at 1.1 and 1.6 nm^?1, respectively) are plotted against the fat content of each of the measured dairy samples. Results show a strong linear dependence of each of the X-ray scattering parameters and the fat content of the investigated dairy products. These results suggest a possible use of such technique as a new, simple and straight forward method for determination of fat content of dairy products that would join and support the currently available techniques.     

γ-irradiated chitosan-polyvinyl pyrrolidone hydrogels as pH-sensitive protein delivery system

The effects of pH of the buffer solution and the composition of the hydrogel system on the bovine serum albumin (BSA) adsorption capacity of chitosan (CS)–polyvinyl pyrrolidone (PVP) (CSPVP) hydrogels and release of BSA were investigated. Poly-electrolyte CSPVP hydrogels with different compositions were prepared by irradiating CS/PVP/water mixtures with γ-rays at ambient temperature. The adsorption capacity of hydrogels was found to increase from 0 to 350 mg BSA/g dry gel, by changing external stimuli and hydrogel composition. The adsorption of BSA within CSPVP hydrogels increased with increase in CS content in the hydrogels. When the irradiation doses of hydrogel increased, the adsorption of BSA decreased. The maximum adsorption of BSA was observed at pH 5. A significant amount of the adsorbed BSA (up to 95%) was eluted in the phosphate medium containing 0.1 M NaCl at pH 7.4.     

Adsorption of Apollo reactive dyes on poly(N,N dimethylamino ethylmethacrylate) hydrogels

Poly(N,N-dimethylamino ethylmethacrylate) [P(DMAEMA)] hydrogels were prepared by irradiating the ternary mixtures of dimethylamino ethylmethacrylate (DMAEMA)/ethyleneglycol dimethacrylate (EGDMA)/water (H₂O) by γ-rays at ambient temperature. The swelling of four types of DMAEMA hydrogels in distilled water is higher than the swelling of these hydrogels in dye solutions. The value of equilibrium swelling of P(DMAEMA)1 hydrogel was 338% at pH 7.0 in distilled water, while it was 325% and 326% at pH 7.0 in Apollofix Red (AR) and Apollofix Yellow (AY) solutions, respectively. The adsorption capacity of P(DMAEMA)1 hydrogel was found to increase from 85 to 131 mg for AR g⁻¹ dry gel and from 58 to 111 mg for AY g⁻¹ dry gel with decreasing pH of the dye solutions.     

Preparation and characterization of a novel IPN hydrogel memberane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAM/CMCS)

A novel type of interpenetrating polymer networks (IPN) hydrogel membrane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAm)/(CMCS) was prepared, and the effects of the feed ratio of components, swelling medium and irradiation dose on the swelling and deswelling properties of the hydrogel was systematically studied. The results showed that the introduction of CMCS did not shift the LCST (at 32 °C), which is similar to the pure PNIPAAm. The lowest swelling ratio was at pH 2. There was little influence of irradiation dose on the thermo- and pH-sensitivity of the IPN hydrogel, increasing dose only decreased the swelling ratio. The PNIPAAm:CMCS=1:4 w/w hydrogel was not thermo-sensitive in distilled water, whereas it showed a discontinuous volume phase transition in pH 2 and a continuous one in pH 8 buffer. Consequently, a combination of pH and temperature can be coupled to control the responsive behavior of these hydrogels.     

Studies on radiation synthesis of polyethyleneimine/acrylamide hydrogels

Polyethyleneimine(PEI)/acrylamide(AAM) hydrogels were synthesized by γ-radiation-induced polymerization/crosslinking of aqueous mixtures containing different ratios of PEI and AAM. The gel percentage and equilibrium degree of swelling (EDS) of the synthesized hydrogels were investigated. The compositions of the hydrogels produced were found to be different from the feed composition. Ion-chromatography technique was used to determine the amount of Pb (II) and Cd (II) absorbed by the hydrogel. The maximum binding capacity of the PEI/AAM hydrogels, for Pb and Cd was found to be 19 and 12.6 mg/g, respectively, (at 100 ppm). PEI/AAM hydrogels had better metal uptake efficiency than the pure AAM hydrogel at concentrations less than 50 ppm. Pure PEI was observed to be highly degrading type polymer on exposure to gamma radiation. TGA and FT-IR techniques were used to characterize the prepared hydrogels.     

Micro- and mesoscopic structure of poly(vinyl alcohol) gels determined by neutron and light scattering

We studied the structure of poly(vinyl alcohol) (PVA) gels formed in mixtures of dimethyl sulfoxide (DMSO) and water using several scattering techniques such as wide-angle neutron scattering (WANS), small-angle neutron scattering (SANS), ultra-small-angle neutron scattering (U-SANS) and light scattering (LS) to cover a very wide Q range from 10^-4 to 10 Å^-1. The WANS measurements have revealed that the cross-linking points of the gels are crystallites, and the size and its distribution have been evaluated by the SANS measurements. The SANS results have also shown that the structure observed in the low Q range below 10^-2 Å^-1 is dominated by a liquid–liquid-phase separation. The early stage of the phase separation has been studied in detail using the time-resolved LS technique, while the late stage has been investigated by the U-SANS technique because the LS measurements cannot access the opaque samples. On the basis of the results, we present a quantitative sketch of the structure of the PVA gel.     

Crosslinking Parameter on the Preparation of Cellulose Based Hydrogel with Divynilsulfone

Polymeric hydrogels are crosslinked polymers which display high sorption capacity in water and water solution. In this work, cellulose based hydrogel was prepared with divinylsulfone as crosslinking agent. Cellulose based hydrogel was synthesized as a mixture of sodium salt of carboxymethylcellulose (CMCNa) and hydroxyethylcellulose (HEC). The effect of chemical composition, temperature and reaction time during crosslinking processes was investigated both the value of equilibrium water uptake and swelling ratio. Infrared spectra of the synthesized polymeric networks were studied to investigate the chemical structure of crosslinking reaction qualitatively. The thermal properties and morphology of the obtained cellulose based hydrogels were observed by means of TGA (thermo-gravimetry analysis) and SEM (scanning electron microscopy), respectively. Crosslinking of CMCNa/HEC polymeric network results in a decrease in thermal stability. Hydrogel with weight ratio of CMCNa/HEC 5 to 1 at reaction temperature of 60 °C gave the highest absorption capacity in distilled water.     

Adsorption of methyl violet in aqueous solutions by poly(N-vinylpyrrolidone-co-methacrylic acid) hydrogels

N-vinylpyrrolidone(VP)/methacrylic acid (MAA) monomer mixtures containing different quantities of methacrylic acid were irradiated with gamma-radiation to form hydrogels. Mixtures which contain 5, 10, 15% and irradiated with 3.4 kGy were used for swelling and diffusion studies in water and solutions of methyl violet and for the adsorption of methyl violet from aqueous solutions. Diffusion of water and methyl violet within hydrogels were found to be of non-Fickian character. In the dye adsorption experiments, the effects of pH, concentration of aqueous solution of dye and the composition of hydrogels on the adsorption process were investigated. When the pH and concentration of aqueous solutions of dye and the MAA content in hydrogels increased, the adsorption increased.     

Swelling and drug release properties of acrylamide/carboxymethyl cellulose networks formed by gamma irradiation

Hydrogels based on acrylamide monomer (AM) and different ratios (5–20 wt%) of carboxymethyl cellulose (CMC) were synthesized by gamma irradiation. The hydrogels were characterized in terms of gel content, swelling and drug release characters. The effect of temperature and pH on the degree of swelling was also studied. The results showed that the gel fraction of AM/CMC hydrogels decreases greatly with increasing the contents of CMC in the initial feeding solution. The kinetic study showed that the swelling of all the hydrogels tends to reach the equilibrium state after 5 h. However, the swelling of AM/CMC hydrogels was greater than the hydrogel based on pure AM. On the other hand, it was found that the swelling of all the hydrogels changes within the temperature range 30–40 °C and within the pH range 4–8. The AM/CMC hydrogels was evaluated for the possible use in drug delivery systems. In this respect, the release properties of methylene blue indicator, as a drug model, was investigated. It was found that the percentage release from the hydrogels increase with time to reach ～80% after 3 h at pH of 2 compared to ～100% at pH of 8.     

Swelling and thermodynamic studies of temperature responsive 2-hydroxyethyl methacrylate/itaconic acid copolymeric hydrogels prepared via gamma radiation

The copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were synthesized by gamma radiation induced radical polymerization. Swelling and thermodynamic properties of PHEMA and copolymeric P(HEMA/IA) hydrogels with different IA contents (2, 3.5 and 5 mol%) were studied in a wide pH and temperature range. Initial studies of so-prepared hydrogels show interesting pH and temperature sensitivity in swelling and drug release behavior. Special attention was devoted to temperature investigations around physiological temperature (37 °C), where small changes in temperature significantly influence swelling and drug release of these hydrogels. Due to maximum swelling of hydrogels around 40 °C, the P(HEMA/IA) hydrogel containing 5 mol% of IA without and with drug-antibiotic (gentamicin) were investigated at pH 7.40 and in the temperature range 25–42 °C, in order to evaluate their potential for medical applications.     

Fibrillar morphologies of hydrogels obtained from a lamellar medium

Hydrogels are suitable for multiple applications and their properties are strongly dependent on their morphology. Sponge-like morphologies are obtained in conventional hydrogels when the polymerization is performed in isotropic media. Fibrillar morphologies imparting new properties to hydrogels are expected when the reacting medium is anisotropic. Here, we synthesize such fibrillar hydrogels by polymerization in a lamellar medium formed by 1,4-bis(2-ethylhexyl)sodium sulfosuccinate (AOT) and water. At high surfactant content this objective is achieved, and the thickness of the obtained fibrils (0.1–1 μm) can be correlated with the physical properties of the lamellar system. At intermediate AOT concentrations, the morphology is hierarchical, with primary closed pores containing a secondary fibrillar structure that fills the pores. For low AOT concentrations, the crosslinking process is unhindered, and the hydrogels are mechanically consistent with a sponge-like morphology having large (10–10² μm) void pores. The time evolution of the mesophase as polymerization advances is followed by small angle X-ray scattering.     

Radiosynthesis of hydrogel confined to hollow-fiber membranes for the design of a bioartificial extra-corporeal liver

Current bioartificial extra-corporeal systems are bioreactors where cells are separated from the surrounding media by porous polymeric membranes. The present work focuses on the design of membranes that allow the differential diffusion of plasma metabolites and proteins such as immunoglobulin (IgG). This design will improve catabolites removal and reduce possible immune response and virus infection.We demonstrate the feasibility to synthesize the hydrogels confined to the macroporous structure of membranes by radiation-induced in situ polymerization. The hollow-fiber membranes were soaked in aqueous monomeric solution, rinsed and irradiated while submerged in oil. This procedure confined the hydrogel to the void internal volume of the pores of the membrane. Hydrogels of polyacrylamide and polyHEMA were synthesized this way by irradiation at 10 kGy. Hydraulic permeability and diffusion of glucose, albumin and IgG were measured in these hydrogel-filled membranes. Polyacrylamide 0.5 M showed the best compromise between albumin diffusion (1.2×10⁻⁷ cm²/s) and HSA/IgG selectivity (2.2).     

Uranyl ion uptake capacity of poly (N-isopropylacrylamide/maleic acid) copolymeric hydrogels prepared by gamma rays

The effect of gel composition, absorbed dose and pH of the solution on the uranyl ion uptake capacity of N-isopropylacrylamide/maleic acid copolymeric hydrogels containing 0–3 mol% of maleic acid at 48 kGy have been investigated. Uranyl uptake capacity of hydrogels are found to increase from 18.5 to 94.8 mg [UO₂²⁺]/g dry gel as the mole % of maleic acid content in the gel structure increased from 0 to 3. The percent swelling, equilibrium swelling and diffusion coefficient values have been evaluated for poly(N-isopropylacrylamide/maleic acid) hydrogels at 500 ppm of uranyl nitrate solution.     

Thermoresponsive and bioactive poly(vinyl ether)-based hydrogels synthesized by radiation copolymerization and photochemical immobilization

A thermoresponsive hydrogel was synthesized by radiation copolymerization of ethylene glycol vinyl ether (EGVE) and butyl vinyl ether (BVE) in the presence of cross-linking agent diethylene glycol divinyl ether. The gel was modified by a cell adhesion factor RGD by photochemical immobilization technique. While the unmodified hydrogel shows fully hydrated form at low temperatures (+4 °C) and it extensively dehydrates at 37 °C, the biomodified hydrogel still kept its thermoresponsive character after immobilization. The effectiveness of immobilization was checked with FTIR-ATR and XPS. The use of bioactive thermoresponsive hydrogels in cell culture applications was investigated. For this purpose, cell culture experiments were realized by L929 mouse fibroblasts. Cell attachment experiments revealed the effect of immobilized RGD with higher values of cell attachment (∼85%), which were obtained especially in the absence of serum. The thermoresponsive character of the hydrogel was useful for the application of low-temperature treatment in order to recover the attached viable cells from the surface of the hydrogel without using trypsin. When the culture temperature was decreased from 37 to 10 °C for 30 min ∼80% of the cells were detached from the hydrogel surface.     

Grafting of acrylamide onto kappa-carrageenan via γ-irradiation: Optimization and swelling behavior

The Taguchi method, a robust experimental design for optimization, was used for the synthesis of a superabsorbent hydrogel network using γ-rays as an initiator, energy source and crosslinker at the same time. Nine different samples of superabsorbent hydrogels were prepared in various conditions from kappa-carrageenan (κC) and acrylamide by γ-irradiation at room temperature. Considering the results of nine trials and according to analysis of variance (ANOVA), a new experimental condition with the concentrations of κC and acrylamide 1.5 g and 0.028 mol (2 g in total volume of 50 mL H₂O), respectively, as well as γ-ray at the optimum total dose (7 kGy) was proposed. After preparing the desired hydrogels according to optimum condition, the swelling behavior of hydrogels in different media was investigated.     

Radiation synthesis and characterization of nanosilver/gelatin/carboxymethyl chitosan hydrogel

A series of antibacterial hydrogels were fabricated from an aqueous solution of AgNO₃, gelatin and carboxymethyl chitosan (CM-chitosan) by radiation-induced reduction and crosslinking at ambient temperature. The nanosilver particles were in situ synthesized accompanying with the formation of gelatin/CM-chitosan hydrogel. Transmission Electron Microscope and UV–vis analysis have verified the formation and homogeneous distribution of nanosilver particles in the hydrogel matrix. The nanosilver/gelatin/CM-chitosan hydrogels possessed interconnected porous structure, had a compressive modulus of 44 to 56 kPa, and could absorb 62 to 108 times of deionized water to its dry weight. Furthermore, the hydrogels were found to have sound antibacterial effect on Escherichia coli (E. coli), and their antibacterial ability could be significantly enhanced by the increasing of AgNO₃ content. The comprehensive results of this study suggest that nanosilver/gelatin/CM-chitosan hydrogels have potential as an antibacterial wound dressing.     

Glass transition behaviour of the quaternary ammonium type ionic liquid, {[DEME][I] + H2O} mixtures

By a simple DTA system, the glass transition temperatures of the quaternary ammonium type ionic liquid, {N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium iodide, [DEME][I] + H₂O} mixtures after quick pre-cooling were measured as a function of water concentration (x mol% H₂O). Results were compared with the previous results of {[DEME][BF₄] + H₂O} mixtures in which double glass transitions were observed in the water concentration region of (16.5 to 30.0) mol% H₂O. Remarkably, we observed the double glass transition phenomenon in {[DEME][I] + H₂O} mixtures too, but the two-T_gs regions lie towards the water-rich side of (77.5 to 85.0) mol% H₂O. These clearly reflect the difference in the anionic effect between ${\text{BF}}_4^{-}$ and I^? on the water structure. The end of the glass-formation region of {[DEME][I] + H₂O} mixtures is around x = 95.0 mol% H₂O, and this is comparable to that of {[DEME][BF₄] + H₂O} mixtures (x = 96.0 mol% H₂O).     

Influence of crosslinker and ionic comonomer concentration on glass transition and demixing/mixing transition of copolymers poly(N-isopropylacrylamide) and poly(sodium acrylate) hydrogels

Hydrogels based on N-isopropylacrylamide and sodium acrylate as ionic comonomer were synthesized by free radical polymerization in water using N,N′-methylenebisacrylamide as crosslinker and ammonium persulfate as initiator. The glass transition of dried copolymers poly(N-isopropylacrylamide) (PNIPA) and poly(sodium acrylate) (SA) gels and demixing/mixing transition of PNIPA-SA hydrogels swollen with increasing amounts of water were studied using conventional differential scanning calorimetry. In the crosslinked polymers, the glass transition linearly increases, and the transition range becomes broader, with increasing crosslinker content. Increasing content of ionic comonomer also produces an increase of glass transition temperature, which moves to higher temperatures with higher sodium acrylate fraction. The influence of chemical structure of PNIPA-SA hydrogels on the lower critical solution temperature (LCST) of PNIPA-SA/water mixtures during heating and cooling was quantified as function of the content of the crosslinker and the ionic comonomer, as well as water content of the hydrogel in the range from 95 to 70 wt%. At parity of water content, the LCST occurs at higher temperatures for gels containing higher amounts of sodium acrylate. Similarly, the introduction of N,N′-methylenebisacrylamide causes an increase of the LCST, which grows with increasing of crosslinking degree of the hydrogel.     

Radiation synthesis of superabsorbent polyethylene oxide/tragacanth hydrogel

A new superabsorbent hydrogel has been prepared from tragacanth and polyethylene oxide (PEO) by gamma radiation at room temperature. Tragacanth solutions with different concentrations (1%, 3% and 5%) have been blended with 5% aqueous solution of PEO at a ratio of 1:1 and irradiated at doses 5–20 kGy. The properties of the prepared composite hydrogels were evaluated in terms of the gel fraction and the swelling behavior. An unexpected growth of the gel fraction was observed in PEO/tragacanth hydrogels irradiated at 5 kGy. Incorporation of 5% tragacanth into the aqueous PEO increased significantly the swelling percent of the hydrogels to more than 14,000% and thus makes it a superabsorbent material.     

Recovery and pre-concentration of gold onto poly((N-(Hydroxymethyl)methacrylamide)–1-allyl-2-thiourea) hydrogels synthesized by gamma radiation

Poly((N-(Hydroxymethyl)methacrylamide)–1-allyl-2-thiourea) hydrogels, Poly(NHMMA–ATU), were synthesized by gamma radiation using ⁶⁰Co γ source at different irradiation doses and different ATU content in the irradiated monomer mixture. The swellability of the synthesized hydrogels was changed by irradiation doses and by the content of ATU in the irradiated mixture. These hydrogels were used for the specific gold recovery and pre-concentration from single gold ion solutions and from different natural samples. It has been observed that gold adsorption capacity onto the hydrogels was high at low pHs and reached maximum value at pH = 0.5. Adsorption capacity of the hydrogels for gold at pH = 0.5 was found to be about 698 mg g^− 1 dry hydrogels. Adsorption equilibrium time of gold ions onto the hydrogels was found to be very short and also these hydrogels were showed extremely high selectivity to the gold ions in acidic media when the concentration of the other metal ions were extremely higher than gold. Because of the high specificity of these hydrogels to gold beside the other metal ions at low pHs, all matrix effects were easily eliminated adsorbing gold onto the hydrogels and desorbing into 3 M HCl solution containing 0.8 M thiourea. These hydrogels were found to be highly open pore size. This property of the hydrogels make them attractive due to high adsorption capacity of gold ions on/in the hydrogels penetrating inside and react to all functional groups in the interior surface of the hydrogels.