Thermodynamic evaluation and optimization of the (NaCl + KCl + AlCl3) system

All available phase equilibrium and thermodynamic data for the (NaCl + KCl + AlCl₃) system were collected and critically evaluated. An optimization was performed to obtain the parameters of one set of model equations for each phase (solids, liquid, gas) in order to best reproduce all the data simultaneously. In this way the data are rendered self-consistent, discrepancies among the data are identified, and extrapolations and interpolations can be performed. For the molten phase the Modified Quasichemical Model for short-range ordering was used, with monomeric Al³⁺ ions (corresponding to AlCl₄⁻ complexes in earlier models) predominating in alkali-rich melts, and dimeric aluminum species (corresponding to Al₂Cl₇⁻ complexes in previous models) predominating in AlCl₃-rich melts. No ternary model parameters were required for the liquid phase; the binary parameters suffice. The models can be used with Gibbs free energy minimization software to calculate phase diagram sections, vapor pressures, and all thermodynamic properties at all compositions and over extended ranges of temperature and pressure.     

Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Na,K)(Mg,Ca,Mn,Fe,Co,Ni)Cl₃ and the (Na,K)₂(Mg,Mn,Fe,Co,Ni)Cl₄ solid solutions were modeled using the Compound Energy Formalism.     

Thermodynamic evaluation and optimization of the (MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. This is the first of two articles on the optimization of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system.     

Thermodynamic evaluation and optimization of the (NaCl + Na2SO4 + Na2CO3 + KCl + K2SO4 + K2CO3) system

A complete, critical evaluation of all phase diagrams and thermodynamic data was performed for all condensed phases of the (NaCl + Na₂SO₄ + Na₂CO₃ + KCl + K₂SO₄ + K₂CO₃) system, and optimized parameters for the thermodynamic solution models were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range order, where the cations (Na⁺ and K⁺) were assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{Cl}}^{-})$ were assumed to mix on an anionic sublattice. The thermodynamic properties of the solid solutions of (Na,K)₂(SO₄,CO₃) were modelled using the Compound Energy Formalism, and (Na,K)Cl was modelled using a substitutional model in previous studies. Phase transitions in the common-cation ternary systems (NaCl + Na₂SO₄ + Na₂CO₃) and (KCl + K₂SO₄ + K₂CO₃) were studied experimentally using d.s.c./t.g.a. The experimental results were used as input for evaluating the phase equilibrium in the common-cation ternary systems. The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature are reproduced within experimental error limits.     

A density model based on the Modified Quasichemical Model and applied to the (NaCl + KCl + ZnCl2) liquid

A theoretical model for the density of multicomponent inorganic liquids based on the Modified Quasichemical Model has been presented previously. By introducing in the Gibbs free energy of the liquid phase temperature-dependent molar volume expressions for the pure components and pressure-dependent excess parameters for the binary (and sometimes higher-order) interactions, it is possible to reproduce, and eventually predict, the molar volume and the density of the multicomponent liquid phase using standard interpolation methods. In the present article, this density model is applied to the (NaCl + KCl + ZnCl₂) ternary liquid and a Kohler–Toop-like asymmetric interpolation method is used. All available density data for the (NaCl + KCl + ZnCl₂) liquid were collected and critically evaluated, and optimized pressure-dependent model parameters have been found. This new volumetric model can be used with Gibbs free energy minimization software, to calculate the molar volume and the density of (NaCl + KCl + ZnCl₂) ternary melts.     

Thermodynamic study of the system (LiCl + CaCl2 + H2O)

Solubility isotherms of the ternary system (LiCl + CaCl₂ + H₂O) were elaborately determined at T = (283.15 and 323.15) K. Several thermodynamic models were applied to represent the thermodynamic properties of this system. By comparing the predicted and experimental water activities in the ternary system, an empirical modified BET model was selected to represent the thermodynamic properties of this system. The solubility data determined in this work at T = (283.15 and 323.15) K, as well as those from the literature at other temperatures, were used for the model parameterization. A complete phase diagram of the ternary system was predicted over the temperature range from (273.15 to 323.15) K. Subsequently, the Gibbs free energy of formation of the solid phases CaCl₂ · 4 H₂O_(s), CaCl₂ · 2 H₂O_(s), LiCl · 2H₂O_(s), and LiCl · CaCl₂ · 5H₂O_(s) was estimated and compared with the literature data.     

Thermodynamic properties of (NaCl + KCl + LiCl + H2O) at T = 298.15 K: Water activities,osmotic and activity coefficients

The water activities of aqueous electrolyte mixture (NaCl + KCl + LiCl + H₂O) were experimentally determined at T = 298.15 K by the hygrometric method at total ionic-strength from 0.4 mol · kg⁻¹ to 6 mol · kg⁻¹ for different ionic-strength fractions y of NaCl with y = 1/3, 1/2, and 2/3. The data allow the deduction of new osmotic coefficients. The results obtained were correlated by Pitzer’s model and Dinane’s mixing rules ECA I and ECA II for calculations of the water activity in mixed aqueous electrolytes. A new Dinane–Pitzer model is proposed for the calculation of osmotic coefficients in quaternary aqueous mixtures using the newly ternary and quaternary ionic mixing parameters of this studied system. The solute activity coefficients of component in the mixture are also determined for different ionic-strength fractions y of NaCl.     

Thermodynamic evaluation and optimization of the (LiF + NaF + KF + MgF2 + CaF2 + SrF2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (LiF + NaF + KF + MgF₂ + CaF₂ + SrF₂) system, and optimized model parameters have been found. The (LiF + NaF + KF + MgF₂ + CaF₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary and ternary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model for short-range ordering was used for the molten salt phase, and the low-temperature and high-temperature (CaF₂ + SrF₂) solid solutions were modelled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Li, Na, K)(Mg, Ca, Sr)F₃ perovskite phase was modelled using the Compound Energy Formalism.     

Thermodynamic evaluation and optimization of the (Ca + C + O + S) system

A critical evaluation of all available thermodynamic and (solid + liquid) phase equilibrium data for the (Ca + C + O + S) system has been performed. The liquid phase was modelled using the Modified Quasichemical Model in the pair approximation. The present database reproduces the (solid + liquid) equilibria of the experimentally studied subsystems of the (Ca + C + O + S) system within the experimental error limits. Estimations of the phase equilibria of systems lacking experimental data were made. The database of thermodynamic data for all phases can be used, along with other databases and Gibbs free energy minimization software, to calculate the phase equilibria and all thermodynamic properties of (Ca + C + O + S) mixtures, which are of great importance for several industrially relevant processes.     

Thermodynamic evaluation and optimization of the (NaF + AlF3 + CaF2 + BeF2 + Al2O3 + BeO) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases and relevant gaseous species of the (NaF + AlF₃ + CaF₂ + BeF₂ + Al₂O₃ + BeO) system, and optimized model parameters have been found. The (NaF + AlF₃ + CaF₂ + Al₂O₃) subsystem, which is the base electrolyte used for the electro-reduction of alumina in Hall–Héroult cells, has been critically evaluated in a previous article. The Modified Quasichemical Model in the Quadruplet Approximation for short-range ordering was used for the molten salt phase. The thermodynamic database developed is a first step towards a quantitative study of the beryllium mass balance in an electrolysis cell. In particular, the predominant Be-containing species in the gas phase evolved at the anode were identified; and, for a given beryllium content of the alumina, the beryllium content of the electrolytic bath at steady state was assessed under several approximations.     

Modeling of the quaternary NaCl + KCl + CH3OH + H2O mixed electrolyte system: Binary and ternary mixing (ion + ion) and (ion + nonelectrolyte) interaction parameters

The purpose of this work is modeling of the quaternary system of mixed NaCl + KCl electrolyte in mixed CH₃OH + H₂O solvent, with different alcohol mass fractions by using particularly, the Pitzer (P) and Pitzer–Esteso (PE) equations and based on potentiometric measurement technique. The experimental data are obtained by different molal salt ratio r (r = m_NaCl/m_KCl = 100, 150, 200 and 250) in mixed solvent with different alcohol mass fractions x (x = 0.10, 0.20, 0.30, 0.40, and 0.50) in water. A galvanic cell is employed for collecting the potentiometric data by combining a Na⁺ glass membrane and Ag/AgCl electrodes and using different series of electrolyte solutions, at defined constant ionic strengths, with the molality ranging from 0.0005 up to 3.5 mol · kg⁻¹, at T = 298.15 ± 0.05 K of experiments. Comparison of the models shows that the modified Pitzer equation by Esteso (PE) present a better fit of the experimental data.     

Thermodynamic evaluation and optimization of the (NaNO3 + KNO3 + Na2SO4 + K2SO4) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaNO₃ + KNO₃ + Na₂SO₄ + K₂SO₄) ternary reciprocal system, and optimised model parameters have been found. The model parameters obtained for the four binary common-ion subsystems (i.e. (NaNO₃ + Na₂SO₄), (KNO₃ + K₂SO₄), (NaNO₃ + KNO₃) and (Na₂SO₄ + K₂SO₄)) are used to predict thermodynamic properties and phase equilibria for the entire system. The Modified Quasichemical Model in the Quadruplet Approximation for short-range ordering was used for the molten salt phase, and the Compound Energy Formalism was used for the various solid solutions.     

Thermodynamic evaluation and optimization of the (Na2CO3 + Na2SO4 + Na2S + K2CO3 + K2SO4 + K2S) system

A critical evaluation of all phase diagram and thermodynamic data were performed for the solid and liquid phases of the (Na₂CO₃ + Na₂SO₄ + Na₂S + K₂CO₃ + K₂SO₄ + K₂S) system and optimized model parameters were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range ordering, where the cations (Na⁺ and K⁺) are assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{S}}^{2-})$ are assumed to mix on an anionic sublattice. The Compound Energy Formalism was used for modelling the solid solutions of (Na, K)₂(CO₃, SO₄, S). The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature were reproduced within experimental error limits.     

Thermodynamic study of the mixed system (CsCl + CaCl2 + H2O) by EMF Measurements at T = 298.15 K

This work reports the results of a thermodynamic investigation of the ternary mixed-electrolyte system (CsCl + CaCl₂ + H₂O). The activity coefficients of this mixed aqueous electrolyte system have been studied with the electromotive force measurement (EMF) of the cell: Cs ion-selective electrode (ISE)|CsCl(m_A), CaCl₂(m_B), H₂O|Ag/AgCl at T = 298.15 K and over total ionic strengths from (0.01 to 1.50) mol · kg^?1 for different ionic strength fractions y_B of CaCl₂ with y_B = (0, 0.2, 0.4, 0.6, and 0.8). The cesium ion-selective electrode (Cs-ISE) and the Ag/AgCl electrode used in this work were made in our laboratory and had a good Nernst response. The experimental results obey the Harned rule, and the Pitzer model can be used to describe this ternary system satisfactorily. The osmotic coefficients, excess Gibbs free energies and activities of water of the mixtures were also calculated.     

Thermodynamic investigation of the (LiF + NaF + CaF2 + LaF3) system

In this work a thermodynamic assessment of the (LiF + NaF + CaF₂ + LaF₃) system is reported. For the thermodynamic modeling of the liquid phase, the classical polynomial model, and the modified quasi-chemical model were used in parallel and compared. The extrapolation to higher order systems was done according to the Toop mathematical formalism. Furthermore, differential-scanning calorimetry data of the ternary (LiF + CaF₂ + LaF₃), (NaF + CaF₂ + LaF₃), and the quaternary (LiF + NaF + CaF₂ + LaF₃) mixtures are presented. Good agreement between the experimental data and the thermodynamic assessment was obtained.     

Thermodynamic evaluation of the (LiF + NaF + BeF2 + PuF3) system: An actinide burner fuel

In this work the LiF–BeF₂, NaF–BeF₂, and BeF₂–PuF₃ binary phase diagrams have been thermodynamically assessed. The first two systems have been optimized based on the known experimental data, whereas the last one has been treated ideally. To describe the excess Gibbs parameters of the liquid solution the modified quasi chemical model based on the quadruplet approximation has been used. The results obtained together with the data of the (LiF + PuF₃), (NaF + PuF₃), and (LiF + NaF) systems, which have been assessed in previous studies, were used to extrapolate the (LiF + NaF + BeF₂ + PuF₃) quaternary system. The calculated (LiF + NaF + BeF₂) ternary subsystem has been compared with the experimental results published in literature. The nuclear fuel properties such as the melting behaviour, the vapour pressure, or the solubility of PuF₃ in the matrix of LiF–NaF–BeF₂ have been derived based on our assessment and compared with measurements in literature.     

Isopiestic measurement and solubility evaluation of the ternary system (CaCl2 + SrCl2 + H2O) at T = 298.15 K

Water activities in the ternary system (CaCl₂ + SrCl₂ + H₂O) and its sub-binary system (CaCl₂ + H₂O) at T = 298.15 K have been elaborately measured by an isopiestic method. The data of the measured water activity were used to justify the reliability of solubility isotherms reported in the literature by correlating them with a thermodynamic Pitzer–Simonson–Clegg (PSC) model. The model parameters for representing the thermodynamic properties of the (CaCl₂ + H₂O) system from (0 to 11) mol ⋅ kg⁻¹ at T = 298.15 K were determined, and the experimental water activity data in the ternary system were compared with those predicted by the parameters determined in the binary systems. Their agreement indicates that the PSC model parameters can reliably represent the properties of the ternary system. Under the assumption that the equilibrium solid phases are the pure solid phases (SrCl₂ ⋅ 6H₂O and CaCl₂ ⋅ 6H₂O)_(s) or the ideal solid solution consisting of CaCl₂ ⋅ 6H₂O_(s) and SrCl₂ ⋅ 6H₂O_(s), the solubility isotherms were predicted and compared with experimental data from the literature. It was found that the predicted solubility isotherm agrees with experimental data over the entire concentration range at T = 298.15 K under the second assumption described above; however, it does not under the first assumption. The modeling results reveal that the solid phase in equilibrium with the aqueous solution in the ternary system is an ideal solid solution consisting of SrCl₂ ⋅ 6H₂O_(s) and CaCl₂ ⋅ 6H₂O_(s). Based on the theoretical calculation, the possibility of the co-saturated points between SrCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s) and between CaCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s), which were reported by experimental researchers, has been discussed, and the Lippann diagram of this system has been presented.