(Liquid + solid) metastable equilibria in quinary system Li2CO3 + Na2CO3 + K2CO3 + Li2B4O7 + Na2B4O7 + K2B4O7 + H2O at T=288 K for Zhabuye salt lake

An experimental study on metastable equilibria at T=288 K in the quinary system Li₂CO₃ + Na₂CO₃ + K₂CO₃ + Li₂B₄O₇ + Na₂B₄O₇ + K₂B₄O₇ + H₂O was done by isothermal evaporation method. Metastable equilibrium solubilities and densities of the solution were determined experimentally. According to the experimental data, the metastable equilibrium phase diagram under the condition saturated with Li₂CO₃ was plotted, in which there are four invariant points; nine univariant curves; six fields of crystallization: K₂CO₃ · 3/2H₂O, K₂B₄O₇ · 5H₂O, Li₂B₂O₄ · 16H₂O, Na₂B₂O₄ · 8H₂O, Na₂CO₃ · 10H₂O, NaKCO₃ · 6H₂O. Some differences were found between the stable phase diagram at T=298 K and the metastable one at T=288 K.     

Phase behavior of (CO2 + methanol + lauric acid) system

In this study the phase equilibrium behaviors of the binary system (CO₂ + lauric acid) and the ternary system (CO₂ + methanol + lauric acid) were determined. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (293 to 343) K and pressures up to 24 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.7524 to 0.9955) for the binary system (CO₂ + lauric acid); (0.4616 to 0.9895) for the ternary system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (2:1); and (0.3414 to 0.9182) for the system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (6:1). For these systems (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid), and (solid + fluid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng–Robinson equation of state with the classical van der Waals mixing rule with a satisfactory correlation between experimental and calculated values.     

(Solid + solute) phase equilibria in aqueous solution. XIII. Thermodynamic properties of hydrozincite and predominance diagrams for (Zn2 + + H2O + CO2)

The thermodynamic properties ofZn₅(OH)₆(CO₃)₂ , hydrozincite, have been determined by performing solubility and d.s.c. measurements. The solubility constant in aqueous NaClO₄media has been measured at temperatures ranging from 288.15 K to 338.15 K at constant ionic strength (I =  1.00 mol · kg ^− 1). Additionally, the dependence of the solubility constant on the ionic strength has been investigated up to I =  3.00 mol · kg ^− 1NaClO₄at T =  298.15 K. The standard molar heat capacity C_{p, m}^ofunction fromT =  318.15 K to T =  418.15 K, as well as the heat of decomposition of hydrozincite, have been obtained from d.s.c. measurements. All experimental results have been simultaneously evaluated by means of the optimization routine of ChemSage yielding an internally consistent set of thermodynamic data (T =  298.15 K): solubility constant log ^* K_{ps 0}⁰ =  (9.0  ±  0.1), standard molar Gibbs energy of formationΔ_fG_m^o {Zn₅(OH)₆(CO₃)₂ }  =  ( − 3164.6  ±  3.0)kJ · mol ^− 1, standard molar enthalpy of formation Δ_fH_m^o{Zn₅(OH)₆(CO₃)₂ }  =  ( − 3584  ±  15)kJ · mol ^− 1, standard molar entropy S_m^o{Zn₅(OH)₆(CO₃)₂ }  =  (436  ±  50)J · mol ^− 1· K ^− 1and C_p,m^o / (J · mol ^− 1· K ^− 1)  =  (119  ±  11)  +  (0.834  ±  0.033)T / K. A three-dimensional predominance diagram is introduced which allows a comprehensive thermodynamic interpretation of phase relations in(Zn^2 +  +  H₂O  +  CO₂) . The axes of this phase diagram correspond to the potential quantities: temperature, partial pressure of carbon dioxide and pH of the aqueous solution. Moreover, it is shown how the stoichiometric composition{n(CO₃) / n(Zn)} of the solid compoundsZnCO₃ and Zn₅(OH)₆(CO₃)₂can be checked by thermodynamically analysing the measured solubility data.     

Measurement and modeling of high-pressure (vapour + liquid) equilibria of (CO2 + alcohol) binary systems

An apparatus based on a static-analytic method assembled in this work was utilized to perform high pressure (vapour + liquid) equilibria measurements with uncertainties estimated at <5%. Complementary isothermal (vapour + liquid) equilibria results are reported for the (CO₂ + 1-propanol), (CO₂ + 2-methyl-1-propanol), (CO₂ + 3-methyl-1-butanol), and (CO₂ + 1-pentanol) binary systems at temperatures of (313, 323, and 333) K, and at pressure range of (2 to 12) MPa. For all the (CO₂ + alcohol) systems, it was visually monitored to insure that there was no liquid immiscibility at the temperatures and pressures studied. The experimental results were correlated with the Peng–Robinson equation of state using the quadratic mixing rules of van der Waals with two adjustable parameters. The calculated (vapour + liquid) equilibria compositions were found to be in good agreement with the experimental values with deviations for the mol fractions <0.12 and <0.05 for the liquid and vapour phase, respectively.     

Measurement and modeling of high-pressure (vapor + liquid) equilibria of (CO2 + alkanol) binary systems

Complementary isothermal (vapor + liquid) equilibria data are reported for the (CO₂ + 3-methyl-2-butanol), (CO₂ + 2-pentanol), and (CO₂ + 3-pentanol) binary systems at temperatures of (313, 323, and 333) K, and at pressure range of (2 to 11) MPa. For all (CO₂ + alcohol) systems, it was visually monitored that there was no liquid immiscibility at the temperatures and pressures studied. The experimental data were correlated with the Peng–Robinson equation of state using the quadratic mixing rules of van der Waals with two adjustable parameters. The calculated (vapor + liquid) equilibria compositions were found to be in good agreement with the experimental data with deviations for the mole fractions <8% and <2% for the liquid and vapor phase, respectively.     

Phase equilibrium data and thermodynamic modeling of the system (CO2 + biodiesel + methanol) at high pressures

The main objective of this work was to investigate the high pressure phase behavior of the binary systems {CO₂(1) + methanol(2)} and {CO₂(1) + soybean methyl esters (biodiesel)(2)} and the ternary system {CO₂(1) + biodiesel(2) + methanol(3)} were determined. Biodiesel was produced from soybean oil, purified, characterized and used in this work. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (303.15 to 343.15) K and pressures up to 21 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.2383 to 0.8666) for the binary system {CO₂(1) + methanol(2)}; (0.4201 to 0.9931) for the binary system {CO₂(1) + biodiesel(2)}; (0.4864 to 0.9767) for the ternary system {CO₂(1) + biodiesel(2) + methanol(3)} with a biodiesel to methanol molar ratio of (1:3); and (0.3732 to 0.9630) for the system {CO₂ + biodiesel + methanol} with a biodiesel to methanol molar ratio of (8:1). For these systems, (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng–Robinson equation of state with the classical van der Waals (PR-vdW2) and Wong-Sandler (PR–WS) mixing rules. Both thermodynamic models were able to satisfactorily correlate the phase behavior of the systems investigated and the PR–WS presented the best performance.     

Solubility of CO2 in the solvent system (water + monoethanolamine + triethanolamine)

This report presents a new set of values for the solubility of carbon dioxide in the solvent system {water (1) + monoethanolamine (2) + triethanolamine (3)} at T = (313.2, 333.2, 353.2, and 373.2) K and CO₂ partial pressures ranging (1.0 to 120) kPa. The results are specific to solvent systems with the following compositions: (i) ω₂ = 0.24, ω₃ = 0.06, (ii) ω₂ = 0.18, ω₃ = 0.12, (iii) ω₂ = 0.12, ω₃ = 0.18, (iv) ω₂ = 0.06, ω₃ = 0.24, and (v) ω₂ = 0, ω₃ = 0.30, where ω refers to the mass fraction of the component. The results fit the Deshmukh and Mather model well.     

Experimental investigation of incipient equilibrium conditions for the formation of semi-clathrate hydrates from quaternary mixtures of (CO2 + N2 + TBAB + H2O)

The three-phase (vapour + liquid + solid) equilibrium conditions for semi-clathrates formed from three mixtures of (CO₂ + N₂), in aqueous solutions of tetra-butyl ammonium bromide (TBAB), were measured in an isochoric reactor. The experiments were conducted at temperatures between (281 and 290) K, at pressures between (1.9 and 5.9) MPa and in aqueous TBAB solutions of w_TBAB = (0.05, 0.10, and 0.20). The experimental results obtained in this study were compared with previously obtained results for gas hydrates, formed from the same three mixtures of (CO₂ + N₂) and it was observed that semi-clathrates formed at a substantially lower pressure than did gas hydrates.     

Thermodynamic evaluation and optimization of the (NaCl + Na2SO4 + Na2CO3 + KCl + K2SO4 + K2CO3) system

A complete, critical evaluation of all phase diagrams and thermodynamic data was performed for all condensed phases of the (NaCl + Na₂SO₄ + Na₂CO₃ + KCl + K₂SO₄ + K₂CO₃) system, and optimized parameters for the thermodynamic solution models were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range order, where the cations (Na⁺ and K⁺) were assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{Cl}}^{-})$ were assumed to mix on an anionic sublattice. The thermodynamic properties of the solid solutions of (Na,K)₂(SO₄,CO₃) were modelled using the Compound Energy Formalism, and (Na,K)Cl was modelled using a substitutional model in previous studies. Phase transitions in the common-cation ternary systems (NaCl + Na₂SO₄ + Na₂CO₃) and (KCl + K₂SO₄ + K₂CO₃) were studied experimentally using d.s.c./t.g.a. The experimental results were used as input for evaluating the phase equilibrium in the common-cation ternary systems. The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature are reproduced within experimental error limits.     

Phase equilibria for H2 + CO2 + H2O system containing gas hydrates

Isothermal phase equilibrium (pressure–composition in the gas phase) for the ternary system of H₂ + CO₂ + H₂O has been investigated in the presence of gas hydrate phase. Three-phase equilibrium pressure increases with the H₂ composition of gas phase. The Raman spectra suggest that H₂ is not enclathrated in the hydrate-cages and behaves only like the diluent gas toward the formation of CO₂ hydrate. This fact is also supported by the thermodynamic analysis using Soave–Redlich–Kwong equation of state.     

High-pressure phase equilibria of {carbon dioxide (CO2) + n-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide} ionic liquids

Ionic liquids (ILs) and carbon dioxide (CO₂) systems have unique phase behavior that has been applied to applications in reactions, extractions, materials, etc. Detailed phase equilibria and modeling are highly desired for their further development. In this work, the (vapor + liquid) equilibrium, (vapor + liquid + liquid) equilibrium, and (liquid + liquid) equilibrium of n-alkyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids with CO₂ were measured at temperatures of (298.15, 323.15, 343.15) K and pressure up to 25 MPa. With a constant anion of bis(trifluoromethylsulfonyl)amide, the n-alkyl chain length on the cation was varied from 1-ethyl-3-methyl-imidazolium ([EMIm][Tf₂N]), 1-hexyl-3-methyl-imidazolium ([HMIm][Tf₂N]), to 1-decyl-3-methyl-imidazolium ([DMIm][Tf₂N]). The effects of the cation on the phase behavior and CO₂ solubility were investigated. The longer alkyl chain lengths increase the CO₂ solubility. The Peng–Robinson equation of state with van der Waals 2-parameter mixing rule with estimated IL critical properties were used to model and correlate the experimental data. The models correlate the (vapor + liquid) equilibrium and (liquid + liquid) equilibrium very well. However, extrapolation of the model to much higher pressures (>30 MPa) can results in the prediction of a mixture critical point which, as of yet, has not been found in the literature.     

High-pressure (vapour + liquid) equilibria for ternary systems composed by {(E)-2-hexenal or hexanal + carbon dioxide + water}: Partition coefficient measurement

A new apparatus based on a static–analytic method assembled in this work was utilised to perform high-pressure (vapour + liquid) equilibria measurements of aqueous ternary systems. This work includes values of isothermal partition coefficients between CO₂ and water of two apple aroma constituents, (E)-2-hexenal and hexanal. Additionally, this work reports new experimental (vapour + liquid) equilibria measurements for the ternary systems (CO₂ + (E)-2-hexenal + water) and (CO₂ + hexanal + water), at fixed liquid phase composition (600 mg · kg⁻¹), at temperatures of (313, 323 and 333) K and at pressures from (8 to 19) MPa. Vapour liquid interphase was checked and monitored visually for all the systems studied in this work. No liquid immiscibility was observed at the composition, temperatures and pressures studied. In order to suggest reasonable operation conditions for fractionation of aromas with dense carbon dioxide, partition coefficients of the aroma compounds between CO₂ and water along with their separation factors from water were calculated. Partition coefficients of (E)-2-hexenal between CO₂ and water were in the range of (6 to 91) and where found to be near six times higher than those of hexanal (9 to 17). Very high separation factors from water were observed (∼10⁴) especially for (E)-2-hexenal. The highest separation factor, for both compounds, was found at a temperature of 313 K and pressures from (12 to 14) MPa.     

Study of bromide salts solubility in the (m1NaBr + m2MgBr2)(aq) system at T = 323.15 K. Thermodynamic model of solution behavior and (solid + liquid) equilibria in the (Na + K + Mg + Br + H2O) system to high concentration and temperature

The bromide minerals solubility in the mixed system (m₁NaBr + m₂MgBr₂)(aq) have been investigated at T = 323.15 K by the physico-chemical analysis method. The equilibrium crystallization of NaBr·2H₂O(cr), NaBr(cr), and MgBr₂·6H₂O(cr) has been established. The solubility-measurements results obtained have been combined with all other experimental equilibrium solubility data available in literature at T = (273.15 and 298.15) K to construct a chemical model that calculates (solid + liquid) equilibria in the mixed system (m₁NaBr + m₂MgBr₂)(aq). The solubility modeling approach based on fundamental Pitzer specific interaction equations is employed. The model gives a very good agreement with bromide salts equilibrium solubility data. Temperature extrapolation of the mixed system model provides reasonable mineral solubility at high temperature (up to 100 °C). This model expands the previously published temperature variable sodium–potassium–bromide and potassium–magnesium–bromide models by evaluating sodium–magnesium mixing parameters. The resulting model for quaternary system (Na + K + Mg + Br + H₂O) is validated by comparing solubility predictions with those given in literature, and not used in the parameterization process. Limitations of the mixed solution models due to data insufficiencies at high temperature are discussed.     

Experimental study of high pressure phase equilibrium of (CO2 + NO2/N2O4) mixtures

Experimental bubble pressure, as well as liquid density of (CO₂ + NO₂/N₂O₄) mixtures are reported at temperatures ranging from (298 to 328.45) K. Experiments were carried out using a SITEC high-pressure variable volume cell. Transition pressures were obtained by the synthetic method and liquid density was deduced from measurement of the cell volume. Correlation of experimental results was carried out without considering chemical equilibrium of NO₂/N₂O₄ system. (Liquid + vapour) equilibrium was found to be accurately modelled using the Peng–Robinson equation of state with classical quadratic mixing rules and with a binary interaction coefficient k_ij equal to zero. Nevertheless, modelling of liquid density values was unsatisfactory with this approach.     

Hot band spectroscopy of CCO in the C–O stretching region: The (ν1 + 2ν3) − 2ν3 and (2ν1 + ν3) − (ν1 + ν3) bands

Two C–O stretching hot bands, (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), of the CCO radical in the ground electronic state were measured. These hot bands are red shifted by approximately 70 cm⁻¹ compared to the C–O stretching fundamental. CCO was produced in a discharge through a flowing mixture of carbon suboxide and helium. The spectra were recorded using a diode laser spectrometer. The band origins were determined to be 1904.32512(62) and 1902.69130(56) cm⁻¹ for (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), respectively. The measurements in this band together with previously reported frequencies in the C–C and C–O stretching regions were analysed to determine harmonic frequencies and anharmonicity constants.     

Thermodynamic evaluation and optimization of the (Na2CO3 + Na2SO4 + Na2S + K2CO3 + K2SO4 + K2S) system

A critical evaluation of all phase diagram and thermodynamic data were performed for the solid and liquid phases of the (Na₂CO₃ + Na₂SO₄ + Na₂S + K₂CO₃ + K₂SO₄ + K₂S) system and optimized model parameters were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range ordering, where the cations (Na⁺ and K⁺) are assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{S}}^{2-})$ are assumed to mix on an anionic sublattice. The Compound Energy Formalism was used for modelling the solid solutions of (Na, K)₂(CO₃, SO₄, S). The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature were reproduced within experimental error limits.     

The precise measurement of the (vapour + liquid) equilibrium properties for (CO2 + isobutane) binary mixtures

Recently, it has been suggested that natural working fluids, such as CO₂, hydrocarbons, and their mixtures, could provide a long-term alternative to fluorocarbon refrigerants. (Vapour + liquid) equilibrium (VLE) data for these fluids are essential for the development of equations of state, and for industrial process such as separation and refinement. However, there are large inconsistencies among the available literature data for (CO₂ + isobutane) binary mixtures, and therefore provision of reliable and new measurements with expanded uncertainties is required. In this study, we determined precise VLE data using a new re-circulating type apparatus, which was mainly designed by Akico Co., Japan. An equilibrium cell with an inner volume of about 380 cm³ and two optical windows was used to observe the phase behaviour. The cell had re-circulating loops and expansion loops that were immersed in a thermostatted liquid bath and air bath, respectively. After establishment of a steady state in these loops, the compositions of the samples were measured by a gas chromatograph (GL Science, GC-3200). The VLE data were measured for CO₂/propane and CO₂/isobutane binary mixtures within the temperature range from 300 K to 330 K and at pressures up to 7 MPa. These data were compared with the available literature data and with values predicted by thermodynamic property models.     

Identifying spectator bonds in modeling reactions: OH + CO → H + CO2

An adiabatic quantum dynamical model is introduced to solve a paradox with respect to the role of the CO vibration in the OH + CO(v) → H + CO₂ reaction. The previous agreement of five-dimensional diabatic with six-dimensional results for CO(v = 0), which erroneously suggested that the CO bond acts as a spectator, is due to a compensation of effects. For CO(v = 1), the reduced dimensionality adiabatic model approximates better the full-dimensional results. Whether AB acts as a spectator in a reaction with X cannot be decided on the basis of a diabatic calculation for AB(v = 0) + X only.     

Interaction second virial coefficients for (CO2 + n-CmH2m+2) with (m=21 to 40) from supercritical fluid chromatography

Partial molar volumes of 11 n-alkanes (C₂₁H₄₄, C₂₂H₄₆, C₂₃H₄₈, C₂₄H₅₀, C₂₅H₅₂, C₂₇H₅₆, C₂₈H₅₈, C₃₁H₆₄, C₃₄H₇₀, C₃₆H₇₄, and C₄₀H₈₂) at infinite dilution in CO₂, obtained by supercritical fluid chromatography at T=310.5 K to T=431.6 K and p=8.7 MPa to p=39.1 MPa, have been used to estimate the (carbon dioxide–alkane) interaction second virial coefficients B₁₂. The isothermal, high-pressure data are fitted by the Peng–Robinson equation of state with the van der Waals one-fluid mixing rules, and the optimised unlike-interaction parameters of the equation are used to calculate B₁₂. The error sources, inherent in this model-dependent procedure, are discussed.     

Measurement of the phase behaviour of the binary systems {carbon dioxide (CO2) + non-ionic surfactants (CiEOj)}

Solubility experiments of ethoxylates surfactants denoted as C_iEO_j (where C_i = hydrocarbon tail, EO_j = oxyethylene groups, i = 6 to 8 and j = 3 to 5) in sub- and supercritical carbon dioxide were carried out at different temperatures, pressures, and concentrations in a Cailletet apparatus as a representative model for dry cleaning system. For a variety of compositions, results are reported for binary systems within temperature and pressure ranges of (260 to 310) K and (2.0 to 10) MPa respectively. In each experiment, the surfactants reach equilibrium with carbon dioxide at different concentrations. The data show that with all the surfactants upon increasing concentration, the liquid–liquid (L–L) curve shifts to lower temperatures. Therefore, the one-phase solution gap is reduced in pressure and temperature at higher concentrations. When the length of the hydrocarbon tail remains constant and the ethoxylated chain is increased from three to five groups, the L–L curve once again shifts to lower temperatures and the two phases start earlier. This effect can be attributed to the higher surfactant’s polarity due to the increase in j. On the other hand, when the number of ethoxylated groups j remains constant and the length of the hydrocarbon tail is increased from six to eight carbon atoms, no significant shift in the L–L curve is observed. That signals the fact that the appearance of two phases is directly related to the number of ethoxylated group which determine the polarity of the molecule.