高消光比掺Yb3+锁模脉冲光纤激光器研究

报道了使用976 nm半导体激光器作为抽运源,利用非线性放大环形镜(NALM)锁模运行的掺Yb3+光纤激光器的实验研究.采用偏振相关隔离器代替偏振无关光隔离器、保偏光纤耦合器代替普通单模光纤耦合器,得到了高消光比的锁模脉冲输出,重复频率13.46 MHz,光谱宽度约2 nm,消光比高于25 dB.     

皮秒光纤激光脉冲两个关键问题的研究

窄带耗散孤子锁模光纤激光器可以产生接近变换限制的皮秒脉冲,但受非线性相移的限制,输出脉冲重复频率不能通过增加腔长来降低,脉冲能量仅在0.1 nJ以下,严重制约着这类皮秒脉冲的实际应用。提出一种通过耦合器抽取腔内脉冲能量、抑制腔内非线性相移积累,进而允许增加腔长来降低窄带耗散孤子皮秒光纤激光脉冲重复频率的方法。运用该方法,成功地将激光器重复频率由35.2 MHz降低到了1.77 MHz,且脉冲时频特性保持不变。提出了一种基于级间FBG陷波滤波的抑制皮秒脉冲光纤放大中光谱展宽的方法。通过简单地使用级间陷波滤波器,既可窄化第一级光纤放大器后的输出脉冲谱宽,允许采用第二级光纤放大器进一步提升脉冲能量,而且,还可将脉冲重塑为近高斯形,利用高斯脉冲光谱展宽斜率小的特点,允许第二级光纤放大器将脉冲能量提升得更高。利用该方法,在RMS（均方值）谱宽保持0.4 nm以内的前提下,10 ps脉冲经标准单模光纤放大器后,能量可由0.2 nJ可提升到10 nJ以上。     

High frequency pulse trains from a self-starting additive pulse mode-locked all-fiber laser

In this paper, a coupled-cavity Er-doped fiber laser is experimentally developed and analyzed. The proposed scheme has the advantage of an all-fiber configuration. Two similar fiber Bragg gratings are employed as reflective components of the main cavity containing the gain medium. The second cavity is generated, in one side, by the reflective flat end of a standard fiber optic pigtail of variable length and, in the other, by one of the Bragg gratings belonging to the main cavity. Depending on the ratio between the lengths of both cavities, trains of stable and short pulses were obtained with a repetition frequency larger than the frequency of the main cavity. The repetition rate of the pulse trains experimentally obtained was as high as 780 MHz (15 times the main cavity frequency) and the pulse width was ∼110 ps. Prediction of the possible repetition rates for each cavities lengths ratio and the upgrading possibilities of this laser system are analyzed.     

Mode-locked all-fiber laser with high stability based on cobalt oxyfluoride

Recent years have witnessed the exploration of fiber laser technology focused on numerous pivotal optoelectronic applications from laser processing and remote sensing to optical communication. Here, using cobalt oxyfluoride(Co OF) as the nonlinear material, a 156 fs mode-locked fiber laser with strong stability is obtained. The rapid thermal annealing technique is used to fabricate the Co OF, which is subsequently transferred to the tapered region of the microfiber to form the effective pulse modulation device. Co OF interacts with the pulsed laser through the evanescent field to realize the intracavity pulse shaping, and then the stable mode-locked pulse is obtained. The mode-locked operation is maintained with the pulse duration of 156 fs and repetition rate of 49 MHz. In addition, the signal-to-noise ratio is about 90 d B. Those experimental results confirm the attractive nonlinear optical properties of Co OF and lay a foundation for the ultrafast application of lowdimensional transition metal oxides.     

宽光谱全正色散锁模掺镱光纤激光器

介绍了一种全正色散宽光谱被动锁模掺镱光纤激光器,利用非线性偏振旋转技术实现全正色散掺镱光纤激光器的被动锁模.当泵浦功率输出为500mW时,激光脉冲输出功率大于139mW,重复频率约为28.1MHz,脉冲宽度为3.8ps.为了进一步研究全正色散光纤激光器的宽光谱输出特性,在腔内熔接50m单模光纤,同时去除双折射滤波片,在泵浦功率为500mW时,观察到稳定锁模单脉冲耗散孤子,光谱范围为1 005~1 140nm,输出激光脉冲最大平均功率为90mW,重复频率为3.58MHz,脉冲宽度为519ps.     

Dark pulses with tunable repetition rate emission from fiber ring laser

We demonstrated the experimental observation of the dark pulses with tunable repetition rate from an erbium-doped fiber ring laser. A considerable length of high nonlinear fiber is incorporated into the fiber ring laser to enhance the nonlinear intensity. In our experiment, both bright and dark pulses can be observed under the conditions of appropriately setting of the device in the cavity. Further study showed that the dark pulse is formed due to the cross coupling between two different lasing wavelengths. Particularly, dark pulse-train with multiple repetition rates was observed from the laser cavity and the repetition rate switchable operation can be realized by simply adjusting the polarization controller (PC) in the cavity. The operation of multiple repetition rates of dark pulses was further experimentally investigated and detected as a result of pulse splitting of each component with different wavelength.     

掺Yb3+双包层大模场面积光纤锁模激光器

报道了一种结构简单、运转稳定并可以输出高脉冲能量的被动锁模光纤激光器.激光器的增益介质为掺Yb³⁺双包层大模场面积光纤,具有非常低的非线性系数.利用非线性偏振旋转效应和半导体可饱和吸收镜结合实现自启动锁模,获得了平均功率为160mW、重复频率为55.9MHz(对应于3nJ的单脉冲能量)、脉冲宽度为10.6ps的激光脉冲输出. 关键词： 大模场面积光纤 光纤激光器 锁模     

基于预啁啾管理放大的掺镱锁模光纤激光器

报导了一种采用预啁啾管理放大技术实现的百飞秒级掺镱光纤激光器系统。该系统首先利用非线性偏振旋转技术搭建锁模种子激光,实现重复频率为82.3 MHz、压缩后脉宽接近180 fs的近线性啁啾稳定脉冲序列。种子脉冲通过预放大级和预啁啾管理放大级后获得了平均功率为12 W、压缩后脉宽低于100 fs的脉冲。经过预啁啾管理放大级的压缩后脉冲宽度明显优于种子激光的压缩后脉冲宽度。     

超短脉冲掺Yb3+光纤激光器实验研究

报道了掺Yb3+光纤激光器产生超短脉冲的实验研究超短脉冲激光器抽运源采用波长为976 nm的半导体激光器,采用非线性偏振旋转相加脉冲锁模技术,通过调节偏振控制器的方向,实现了掺Yb3+光纤激光器的稳定锁模输出,获得了最大输出功率为7.02 mW,脉冲激光光谱宽度为6 nm,重复频率为13.7 MHz.     

High energy giant chirped passively mode-locked Yb3+-doped fiber laser with nanoseconds to picoseconds pulses

We report an all normal dispersion low repetition rate high energy passive mode-locked ytterbium-doped fiber laser with output pulses duration ranging from nanoseconds to picoseconds. The mode-locking mechanism of the laser is based on nonlinear polarization evolution and strong pulses shaping with a cascade long-period fiber grating bandpass filtering in highly chirped pulses. The laser generates highly stable pulses duration from 2.62 ns to 315 ps with a maximum pulse energy of 49.5 nJ and 2.5435 MHz repetition rate.     

基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器

报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用.     

高重复频率全光纤被动锁模掺铒光纤激光器

报道了一种高重复频率全光纤非线性偏振旋转锁模掺铒光纤激光器, 获得了重复频率217 MHz的锁模脉冲输出. 该激光器使用一个偏振相关隔离器和一个偏振控制器即可获得稳定的锁模脉冲输出, 结构简单, 系统稳定. 激光器锁模脉冲的脉冲宽度为69 fs, 3 dB光谱宽度为56 nm, 射频频谱信噪比为76 dB.     

Experimental study of nonlinear switching characteristics of conventional 2 × 2 fused tapered couplers

The nonlinear switching characteristics of fused fiber directional couplers were studied experimentally. By using femtosecond laser pulses with pulse width of 100 fs and wavelength of about 1550 nm from a system of Ti:sapphire laser and optical parametric amplifier (OPA), the nonlinear switching properties of a null coupler and a 100% coupler were measured. The experimental results were coincident with the simulations based on nonlinear propagation equations in fiber by using super-mode theory. Nonlinear loss in fiber was also measured to get the injected power at the coupler. After deducting the nonlinear loss and input efficiency, the nonlinear switching critical peak powers for a 100% and a null fused couplers were calculated to be 9410 and 9440 W, respectively. The nonlinear loss parameter PN in an expression of αNL = αP/PN was obtained to be PN = 0.23 W.     

被动谐波锁模掺Yb3+光纤环形激光器

 利用光纤的非线性偏振旋转效应产生可饱和吸收体的锁模机制，从掺Yb³⁺光纤环形激光器中得到稳定高阶谐波锁模光脉冲。理论分析了工作于正色散区的掺Yb³⁺光纤环形激光器的特性。实验中观测到了掺Yb³⁺光纤环形激光器3种不同演化方式产生高阶锁模光脉冲。4阶谐波锁模脉冲（107.2 MHz重复频率）经过1 m长高掺杂Yb³⁺光纤放大器放大后产生了平均功率100 mW，脉宽22.8 ps的脉冲，最后经过光栅压缩得到了平均输出功率20 mW，脉宽307 fs，脉冲中心波长1 051.2 nm，带宽13.76 nm的激光。     

有理数谐波主被动锁模掺铒光纤激光器

在理论上详细分析了利用非线性光学环形镜（NOLM）来减小输出脉冲幅度波动,消除噪声并对脉冲进行压缩整形的物理机制。在主动锁模掺铒光纤环形激光器中（AHML－EDFL）接入一个非线性光学环形镜,形成结构新颖的主被动锁模掺铒光纤激光器（APHML－EDFL）,利用非线性光学环形镜所具有的饱和吸收体功能,成功地制抑了4阶有理数谐波锁模（RHML）中较大的幅度噪声,在1GHz量级的调制频率下,由主被动锁模掺铒光纤激光器获产生重复频率为5．1GHz,幅度相当稳定的4阶有理数谐波锁模脉冲序列。     

Cross-validation of theoretically quantified fiber continuum generation and absolute pulse measurement by MIIPS for a broadband coherently controlled optical source

The predicted spectral phase of a fiber continuum pulsed source rigorously quantified by the scalar generalized nonlinear Schrödinger equation is found to be in excellent agreement with that measured by multiphoton intrapulse interference phase scan (MIIPS) with background subtraction. This cross-validation confirms the absolute pulse measurement by MIIPS and the transform-limited compression of the fiber continuum pulses by the pulse shaper performing the MIIPS measurement, and permits the subsequent coherent control on the fiber continuum pulses by this pulse shaper. The combination of the fiber continuum source with the MIIPS-integrated pulse shaper produces compressed transform-limited 9.6 fs (FWHM) pulses or arbitrarily shaped pulses at a central wavelength of 1020 nm, an average power over 100 mW, and a repetition rate of 76 MHz. In comparison to the 229-fs pump laser pulses that generate the fiber continuum, the compressed pulses reflect a compression ratio of 24.     

基于光纤中超短脉冲非线性传输机理与特定光谱选择技术的多波长飞秒激光的产生

高集成、高可靠性宽调谐飞秒激光源在超快光谱学、量子光学及生物成像等研究与应用领域具有重要价值.如在生物多光子显微成像中,具有适中能量的宽调谐飞秒激光源不仅可满足多种生物组织荧光激发所需的峰值功率与激发波长,而且也可以显著提升非线性荧光产生效率、成像分辨率以及增大成像穿透深度.采用自主研发的高可靠性全保偏光纤飞秒激光器作为抽运源,基于低色散光纤中高峰值功率飞秒激光脉冲非线性传输引起的光谱加宽机制,本文开展了多波长全光纤飞秒激光产生技术研究.通过采用中心波长在980, 1000,1050, 1070与1100 nm的带通滤波片选择性地对单模光纤输出光谱中最左边与最右边光谱旁瓣进行滤波,在上述中心波长处分别可获得203, 195, 196, 187与194 fs的激光输出.本文提出的基于全光纤飞秒激光脉冲在单模光纤中非线性传输引起的光谱加宽机制与特定光谱选择技术的实验方案为高集成、高可靠性宽调谐飞秒激光源的实现提供了新的研究途径.     

滤波对8字腔掺铒光纤激光器锁模运转的影响

构建了基于损耗非对称非线性光学环镜的8字腔掺铒光纤锁模激光器,并讨论了腔内滤波带宽对腔内脉冲演化和激光器输出特性的影响.在非线性光学环镜中引入双向输出耦合器,耦合器和传输光纤位置的不对称产生非互易性,实现锁模运转.利用自制的可调谐滤波器实验研究了滤波带宽对激光器的影响.当滤波带宽为2.1 nm时,腔内脉冲的演化过程受滤波和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲半高全宽分别为583.7fs和2.94 ps.随着滤波带宽增大,滤波的作用逐渐减弱,激光器两路输出脉冲参数逐渐接近,并接近傅里叶变换极限脉冲.当滤波带宽较大时,腔内脉冲的演化过程受增益谱和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲均为变换极限脉冲,半高全宽约为440 fs.通过调节滤波器中心波长实现了对激光器输出脉冲光谱的连续调谐,调节范围大于30 nm.     

基于多波长类噪声脉冲的掺铒光纤激光器

报道了一种基于多波长类噪声脉冲的被动锁模掺铒光纤激光器。采用980 nm半导体激光器作为泵浦源，2.5 m长的掺铒光纤作为增益介质。锁模机制为非线性放大环形镜(NALM)。通过自相关迹证明输出脉冲为类噪声脉冲。该类噪声脉冲的光谱3 dB带宽可达17.2 nm，边模抑制比为47.7 dB，重复频率为5.434 MHz，单脉冲能量为7.9 nJ。为了实现平坦的多波长输出，在NALM结构中加入Sagnac环干涉仪，获得了最大波长数为5的平坦多波长类噪声脉冲，平坦度为1.995。     

基于Sagnac干涉仪的混合锁模光纤激光器

研制了一台波长可调混合锁模掺铒光纤激光器.该激光器是由基于分光比为30∶70的耦合器和偏振控制器组成的Sagnac干涉仪构成.通过10GHz的调制器的调制，得到重复率为9.998149 GHz，脉宽小于18 ps的锁模脉冲输出.该脉冲是近变换极限脉冲.