Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

Realization approach of Pd-only three-way catalysts with high catalytic performance and thermal stability

Pd-only three-way catalyst(TWC),Pd supported on washcoating(the mixture of alumina and Ce-Zr solid solution)/cordierite,was prepared and its catalytic performance and the operation window(λ-value)at 450°C were evaluated with the simulated automotive exhaust feed gas.Surfactants such as Tween-80 and Span-20 were added in the process of preparing the catalyst in order to improve the thermal stability and catalytic performance of Pd-only TWC.The fresh and aged catalysts at 1000°C for4 h were characterized by low-temperature N2 adsorption,XRD,XPS,and H2-TPR techniques.The results show that the presence of surfactants in the synthesis slurry could influence the physicochemical properties of the final Pd-only TWC.The FTS catalyst prepared with the mixed surfactant of Tween-80 and Span-20 exhibited excellent three-way catalytic performance.After being aged at 1000°C for 4 h,the catalytic performances of Pd-only TWCs slightly decreased,but the FTS catalyst still demonstrated higher catalytic performance and better thermal stability compared with the Pd-only catalysts prepared with single surfactant or without any surfactant.And the FTS catalyst has a widerλvalue(operation window)than other catalysts,even after being aged at 1000°C.     

The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization简

Ethylene polymerization was carried out by immobilization of rac-ethylenebis(1-indenyl)zirconium dichloride(Et(Ind)2 ZrCl2) and rac-dimethylsilylbis(1-indenyl)zirconium dichloride(Me2 Si(Ind)2 ZrCl2) preactivated with methylaluminoxane(MAO) on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me2 Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 °C and 70 °C for Me2 Si(Ind)2 ZrCl2 /MAO and Et(Ind)2 ZrCl2 /MAO catalysts systems, respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 °C for both catalysts systems. The melting points of the produced polyethylene were about 130 °C, which could be attributed to the linear structure of HDPE.     

Ethylene glycol aluminum as a novel catalyst for the synthesis of poly(ethylene terephthalate)

Ethylene glycol aluminum was prepared efficiently and characterized by FT-IR and NMR.It exhibited higher catalytic activity and had profitable effect than titanium glycolate and ethylene glycol antimony for the synthesis of poly(ethylene terephthalate) (PET).It was only used as polycondensation catalyst because it was sensitive to water.For this catalyst,the degree of esterification of the theoretical amount of water was produced up to 95%at 260℃,while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PET polyester,polymerized at 280℃,70 Pa for 39 min,was 0.87 dL/g and 23.0μmol/g,respectively. Ethylene glycol aluminum was a promising catalyst for the synthesis of PET polyester.     

Selective catalytic oxidation of NO with O2 over Ce-doped MnOx/TiO2 catalysts

A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=1/3 and calcined at 300°C shows a superior activity for NO oxidation to NO2. On Ce(1)Mn(3)Ti catalyst, 58% NO conversion was obtained at 200°C and 85% NO conversion at 250°C with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst (48% at 250°C). Characterization results implied that the higher activity of Ce(1)Mn(3)Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3+ and Ti3+ species. The addition of Ce into MnOx/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.     

Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas

The intrinsic kinetics of dimethyl ether (DME) synthesis from syngas over a methanol synthesis catalyst mixed with methanol dehydration catalyst has been investigated in a tubular integral reactor at 3-7MPa and 220-260℃. The three reactions including methanol synthesis from CO and H2, CO2 and H2, and methanol dehydration were chosen as the independent reactions. The L-H kinetic model was presented for dimethyl ether synthesis and the parameters of the model were obtained by using simplex method combined with genetic algorithm. The model is reliable according to statistical analysis and residual error analysis. The synergy effect of the reactions over the bifunctional catalyst was compared with the effect for methanol synthesis catalyst under the same conditions based on the model. The effects of syngas containing N2 on the reactions were also simulated.     

Nitrogen-doped carbon encapsulated in mesoporous TiO_2 nanotubes for fast capacitive sodium storage

Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO₂@N-doped carbon nanotubes(TiO₂@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO₂@NC-NTs with tiny nanocrystals of anatase TiO₂ wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m² g^-1 and a large pore size of~5 nm.The TiO₂@NC-NTs delivered high reversible capacities of 158 m A h g^-1 at 2 C(1 C=335 m A g^-1)for 2200 cycles and 146 m A h g^-1 at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^-1.Even at a high current density of 10 C,a capacity of 138 m A h g^-1 could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO₂@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.     

Phthalonitrile Resins Derived from Vanillin: Synthesis,Curing Behavior,and Thermal Properties

Vanillin was used as sustainable source for phthalonitrile monomer synthesis, and allyl/propargyl ether moieties were introduced to improve the processability at the minimal cost of thermal properties. The synthesis route was optimized to minimize side-reactions and simplify post-processing, and the monomers were obtained in high purity and good yields. The curing behavior, mechanism, and processability of the monomers were studied, and the thermal properties of cured polymers were evaluated. Of the two monomers, the allyl ether-containing one exhibited a wide processing window of 185 °C, and was mainly cured into phthalocyanine and linear aliphatic structures through self-catalytic curing process. Also, the glass transition temperature was higher than 500 °C. In contrast, the propargyl ether-containing monomer could only be partially cured, and heat resistance was found to be compromised. Compared with traditional petroleum-based phthalonitrile resins, the biobased monomers could be cured without the addition of catalysts, and improvement in processability was achieved at no cost of thermal performances.     

Partial Oxidation of Methane to Synthesis Gas over Hexaaluminates LaMAl_(11)O_(19-δ) catalysts

A series of M-substituted hexaaluminates LaMAl11O19-δ(M=Fe, Co, Ni, Mn, and Cu) were prepared and characterized by XRD, XPS, TPR and TGA techniques, respectively. They exhibited different reducibility and catalytic activity for partial oxidation of methane (POM) to synthesis gas. Among the LaMAl11O19-δsamples, LaNiAl11O19-δshowed the best catalytic activity for the topic reaction and selectivity for synthesis gas at 780℃for 2 h. The conversion of CH4 was over 99.2%, and the product selectivity for both CO and H2 was above 90.3%.     

Synthesis of 3－（1－Cyclohexenyl）－2－butanone via Environmentally Friendly Catalysts

We substituted several environmentally friendly catalysts which included HY and H-β zeolites, various cation-exchanged β zeolites, and solid-supported ferric chloride for conventional catalysts for the synthesis of 3-(1-cyclohexenyl)-2-butanone from the reaction of ethylidenecyclohexane with acetic anhydride at room temperature. HY zeolite was found to be the most effective for this reaction, and gave the acYlated product in a 72% yield under the conditions of n(ethylidenecyclohexane)/n(acetic anhydride)/m(HY zeolite)= 1 mmol/10 mmol/0. 100 g, reaction temperature 25 ℃ and reaction time 2 h. The used HY zeolite can be recovered, regenerated and gave almost the same yield as the fresh one. The lifetime of the HY zeolite is over 80 h. The effect of different factors on the reaction has also been investigated.     

Melamine modified carbon felts anode with enhanced electrogenesis capacity toward microbial fuel cells

Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells(MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM), atomic force microscopy(AFM)and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 m W/m~2(700 °C) and 461.5 m W/m~2(1200 °C) and further increase to472.5 m W/m~2(700 °C) and 515.4 m W/m~2(1200 °C) with the co-carbonization modification of melamine.The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs' s anode materials.     

Preparation of active carbons from corn stalk for butanol vapor adsorption

Active carbons(ACs) were prepared through chemical activation of biochar from whole corn stalk(WCS)and corn stalk pith(CSP) at varying temperatures using potassium hydroxide as the activating agent. ACs were characterized via pore structural analysis and scanning electron microscopy(SEM). These adsorbents were then assessed for their adsorption capacity for butanol vapor. It was found that WCS activated at900 °C for 1 h(WCS-900) had optimal butanol adsorption characteristics. The BET surface area and total pore volume of the WCS-900 were 2330 m2/g and 1.29 cm3/g, respectively. The dynamic adsorption capacity of butanol vapor was 410.0 mg/g, a 185.1% increase compared to charcoal-based commercial AC(143.8 mg/g).     

One-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles under ultrasonic irradiation

A facile one-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles was achieved by ultrasonic irradiation of a mixture of 1- naphthylacetyl chloride,NH_4CNS,CH_2Cl_2 and PEG-400 for 1.5 h at 10-20℃and subsequent irradiation for 1.5h in the presence of N-arylglycine hydrazides.This method requires short time and gives thiadiazoles in high yields.     

Ultrathin free-standing electrospun carbon nanofibers web as the electrode of the vanadium flow batteries

Ultrathin free-standing electrospun carbon nanofiber web(ECNFW) used for the electrodes of the vanadium flow battery(VFB) has been fabricated by the electrospinning technique followed by the carbonization process in this study to reduce the ohmic polarization of the VFB. The microstructure, surface chemistry and electrochemical performance of ECNFW carbonized at various temperatures from 800 to 1400 °C have been investigated. The results show that ECNFW carbonized at 1100 °C exhibits the highest electrocatalytic activity toward the V~(2+)/V~(3+)redox reaction, and its electrocatalytic activity decreases along with the increase of carbonization temperature due to the drooping of the surface functional groups.While for the VO~(2+)/VO_2~+redox couple, the electrocatalytic activity of ECNFW carbonized above 1100 °C barely changes as the carbonization temperature rises. It indicates that the surface functional groups could function as the reaction sites for the V~(2+)/V~(3+)redox couple, but have not any catalytic effect for the VO~(2+)/VO_2~+redox couple. And the single cell test result suggests that ECNFW carbonized at 1100 °C is a promising material as the VFB electrode and the VFB with ECNFW electrodes obtains a super low internal resistance of 250 mΩ cm~2.     

Gas permeation properties of poly(lactic acid)

The need for the development of polymeric materials based on renewable resources has led to the development of poly(lactic acid) (PLA) which is being produced from a feedstock of corn rather than petroleum. The present study examines the permeation of nitrogen, oxygen, carbon dioxide, and methane in amorphous films of PLA cast from solution. The properties of PLA are compared to other commodity plastics and it is shown that PLA permeation closely resembles that of polystyrene. At 30°C, N₂ permeation in PLA is 1.3 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and the activation energy is 11.2 kJ/mol. For oxygen the corresponding values are 3.3 (10⁻¹⁰ cm³(STP) cm/cm² s cm Hg) and 11.1 kJ/mol. The values for carbon dioxide permeation are 1.2 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and 6.1 kJ/mol. For methane values of 1.0 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and an activation energy of 13.0 kJ/mol are found. Studies with pure gases show that polymer chain branching and small changes in l:d stereochemical content have no effect on permeation properties. Crystallinity is found to dominate permeation properties in a biaxially oriented film. The separation factor for a CO₂/CH₄ mixed gas system is measured between 0 and 50°C and does not deviate significantly from the calculated ideal separation factor; at 0°C the separation factor is 16, a value that suggests continued studies of PLA as a separation medium are warranted.     

Preparation of novel magnetic hollow mesoporous silica microspheres and their efficient adsorption

Ordered mesoporous aluminas with high surface areas (up to 783 m²/g), large pore volumes (up to 0.82 cm³/g) and the presence of complementary micropores (up to 0.17 cm³/g) are synthesized with Pluronic® F127 or P123 triblock copolymers in a one-pot synthesis of metal alkoxide, template and cosolvent molecules such as 1,3,5-trimethylbenzene or 1,3,5-triisopropylbenzene in an acidic ethanol solution at 15 °C. Materials are characterized by nitrogen adsorption analysis, small-angle X-ray diffraction and transmission electron microscopy.     

Preparation of new hybrid organic/inorganic polymeric chiral stationary phases for ligand-exchange chromatography

Three new hybrid organic/inorganic polymeric ligand-exchange chiral stationary phases were developed by radical chain transfer reaction and surface grafting on silica gel,and successfully used for the enantioseparations of DL-amino acids and DL-hydroxyl acids.The resolutions were achieved by using water containing 2.0×10~(-4) mol/L of CuAc_2 as a mobile phase,column temperature of 40℃,flow rate of 1.0mL/min and detection at UV 254 nm.The elution order of D-isomer before L-isomer was observed for all DL-amino acids resolved except DL-Pro.     

A new method for determination of antithrombotic activity of egg white protein hydrolysate by microplate reader

A new method for the determination of antithrombotic activity of egg white protein hydrolysate(EWPH)was developed using amicroplate reader.Reaction was carried out at 37℃ and pH 7.2 with fibrinogen concentration 0.1%.Microplate reading wasconducted at 405 nm.Inhibition rate of EWPH on thrombin activity showed linearity(R~2=0.9971),when the inhibition rate was inthe range of 10-90%.The lower limit of detection(LLD,at 99.7%probability)and the biological limit of detection(BLD,at 99.7%probability)of the method were 10.643 and 40 mg/mL,respectively.The repeatability standard deviation(R.S.D.)was 1.08%.Thestandard deviation of the method was 0.027 AT-U.     

An efficient and facile procedure for synthesis of octyl polyglucoside

Nonionic surfactant alkyl polyglucoside (APG) was prepared by direct glycosidation of alkyl alcohol with glucose in the presence of sulfate acid-silica gel (H_2SO_4/SiO_2) as solid acidic catalyst.The quantity of catalyst was only of 1 wt%,based on the glucose,and the conversion of glucose was close to 100% at 110℃in 1.5h.The product was characterized by FT-IR,mass and ~1H NMR spectra.The degree of polymerization (DP) of the glucose in the product was 1.37,and critical micelle concentration (CMC) of product was only 0.0104 wt%.