Structural,photoluminescent, and dielectric properties of Eu3+-doped Ba0.7Sr0.3TiO3 thin films

Eu³⁺-doped Ba_0.7Sr_0.3TiO₃ thin films were prepared by a chemical solution deposition method and characterized by X-ray diffraction, field emission scanning electron microscopy, photoluminescence and dielectric measurements. The thin films were well crystallized with a pure perovskite structure. A contraction of the unit cell was observed upon incorporation of Eu³⁺ ions below 2 mol%, while an expansion occurred as the Eu³⁺ concentration was further increased above 2 mol%, indicating that Eu³⁺ ions with different concentrations occupied different lattice sites. Photoluminescence spectra showed two prominent transitions of Eu³⁺ ions at 594 nm (⁵D₀ → ⁷F₁) and 618 nm (⁵D₀ → ⁷F₂) upon excitation at 395 nm (⁷F₀ → ⁵L₆). There existed two quenching concentrations at 2 mol% and 4 mol% due to different lattice sites of the Eu³⁺ ions. We also investigated the dielectric properties of the thin films. Our study suggests that Eu³⁺-doped Ba_0.7Sr_0.3TiO₃ thin films have potential applications in multifunctional optoelectronic devices.     

Eu3+-site occupation in CaTiO3 perovskite material at low temperature

In order to clarify the site occupancy of rare-earth ions in rare-earth doped perovskite materials, the un-doped pure CaTiO₃ and Eu³⁺-doped CaTiO₃ samples with a series of Ca/Ti ratio were synthesized via high-temperature solid-state reaction method. X-ray diffraction (XRD) powder patterns confirm that the crystal structure keeps invariant at various Ca/Ti ratios. Measurement results of unit-cell parameters and X-ray photoelectron spectroscopy (XPS) indicate that Eu³⁺ ions enter into the Ca²⁺ site. The high-resolution photoluminescence spectra of Eu³⁺ ions at 20 K in all samples did not witness a significant change under the excitation at different wavelength, implying that Eu³⁺ ions occupy only one type of site. Considering the small spectral splitting range of ⁵D₀ → ⁷F₂ transition and the large intensity ratio of ⁵D₀ → ⁷F₂/⁵D₀ → ⁷F₁, it can be concluded that Eu³⁺ occupies Ca²⁺ site with larger coordinate numbers rather than Ti⁴⁺ site.     

Synthesis and Optical Properties of Novel Red-Emitting PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu<Superscript>3+</Superscript> Phosphors

Undoped and PbNb₂O_6:Eu³⁺ (1.0 ≤ x ≤ 6.0 mol%) phosphors were synthesized at 1100 °C for 3.5 h by the conventional solid state reaction method. Synthesized PbNb₂O₆:Eu³⁺ phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS) and Photoluminescence (PL) analyses. The PL spectra showed series of excitation peaks between 350 and 430 nm due to the 4f–4f transitions of Eu³⁺. For 395.0 nm excitation, emission spectra of Eu³⁺ doped samples were observed at 591 nm (orange) and 614 nm (red) due to the ⁵D₀ → ⁷F₁ transitions and ⁵D₀ → ⁷F₂ transitions, respectively. PL analysis results also showed that the emission intensity increased by increasing Eu³⁺ ion content. No concentration quenching effect was observed. The CIE chromaticity color coordinates (x,y) of the PbNb₂O₆:Eu³⁺ phosphors were found to be in the red region of the chromaticity diagram.     

Photoluminescence and electrical properties of Eu-doped (Na0.5Bi0.5)TiO3 ferroelectric single crystals

Eu³⁺-doped Na_0.5Bi_0.5TiO₃ (Eu:NBT) single crystals were grown by a top-seeded solution growth method. Photoluminescence emission and excitation spectra of Eu:NBT were investigated. The two transitions in ⁷F₀ → ⁵D₀ excitation spectra reveal that Eu³⁺ ions were incorporated into two adjacent crystallographic sites in NBT, i.e., Bi³⁺ and Na⁺ sites. The former has a symmetrical surrounding, while the later has a disordered environment, which was confirmed by decay curve measurements. The dielectric dispersion behavior was depressed and the piezoelectric and ferroelectric properties were improved after Eu doping.     

Photoluminescence characteristics and energy transfer between Bi3+ and Eu3+ in Gd2O3: Eu3+, Bi3+ nanophosphors

Bi³⁺ and Eu³⁺ codoped cubic Gd₂O₃ nanocrystals were prepared by the Pechini sol-gel method. Their photoluminescent properties were investigated under ultraviolet light excitation. The introduction of Bi³⁺ ions broadened the excitation band of Eu³⁺ emission, of which a new strong band occurred ranging from 320 to 380 nm due to the 6s²→6s6p transition of Bi³⁺ ions, implying a very efficient energy transfer from Bi³⁺ ions to Eu³⁺ ions. Upon 325 and 355 nm light excitation, the luminescent intensity of Eu³⁺ ions was remarkably improved by the incorporation of Bi³⁺ ions. But a significant quenching of Eu³⁺ emission was observed under 266 nm light excitation when Bi³⁺ was codoped. The possible energy transfer processes between Bi³⁺ and Eu³⁺ were discussed. The decay curves of Eu³⁺ emission under the excitation of 266 nm pulsed laser were measured and gave further evidence for our discussion.     

Enhancement of up-conversion luminescence in Zn2SiO4:Yb3+, Er3+ by co-doping with Li+ or Bi3+

Yb³⁺/Er³⁺ co-doped Zn₂SiO₄ ceramics are rapidly synthesized by the microwave radiation method. Green and red up-conversion emissions are observed in Zn₂SiO₄: Yb³⁺, Er³⁺ ceramics under 980 nm excitation. The influence of co-doped Li⁺ or Bi³⁺ ion on luminescence intensity for the phosphors has been investigated. At Li⁺ or Bi³⁺ doping concentration of 1 mol%, up-converted green emission can be increased by 6 times and 20 times, respectively. It is believed that co-doped Li⁺ or Bi³⁺ ion results in the local distortion of Er³⁺ in Zn₂SiO₄, increasing the intra-4f transitions of Er³⁺ ions. The local distortion is proved by spectral probing method with Eu³⁺.     

Luminescence spectroscopy of Eu3+ and Mn2+ ions in MgGa2O4 spinel

Photoluminescence and excitation spectra of the spinel-type MgGa₂O₄ with 0.5 mol. % Mn²⁺ ions and Eu³⁺ content from 0 to 8 mol. % have been investigated in this work at room temperature. Polycrystalline samples were synthesized via high-temperature solid-state reaction method. Photoluminescence spectra of all samples exhibit host emission presented by a broad “blue” band peaking ∼430 nm, which consists of at least three elementary bands that correspond to different host defects. Excitation of the host luminescence showed the broad band with a maximum at 360 nm. Characteristic bands of d–d transitions of Mn²⁺ ions and f–f transitions of Eu³⁺ ions together with charge-transfer bands (CTB) of these ions were also found on the excitation spectra. Mn²⁺ and Eu³⁺ co-doped samples emit in green and red spectral regions. Mn²⁺ ions are responsible for the green emission band at 505 nm (⁴Т₁→⁶А₁ transition). The studies of photoluminescence spectra of activated samples with different Eu³⁺ ions content show characteristic f–f luminesecence of Eu³⁺ ions. The maximum of Eu³⁺ emission was found at 618 nm (⁵D₀→⁷F₂) and optimal concentration of activator ions was around 4 mol. %.     

Broadband,site selective and time resolved photoluminescence spectroscopic studies of finely size-modulated Y2O3:Eu3+ phosphors synthesized by a complex based precursor solution method

Undoped and Eu³⁺-doped cubic yttria (Y₂O₃) nanophosphors of good crystallinity, with selective particle sizes ranging between 6 and 37 nm and showing narrow size distributions, have been synthesized by a complex-based precursor solution method. The systematic size tuning has been evidenced by transmission electron microscopy, X-ray diffraction, and Raman scattering measurements. Furthermore, size-modulated properties of Eu³⁺ ions have been correlated with the local structure of Eu³⁺ ion in different sized Y₂O₃:Eu³⁺ nanophosphors by means of steady-state and time-resolved site-selective laser spectroscopies. Time-resolved site-selective excitation measurements performed in the ⁷F₀ → ⁵D₀ peaks of the Eu³⁺ ions at C₂ sites have allowed us to conclude that Eu³⁺ ions close to the nanocrystal surface experience a larger crystal field than those in the nanocrystal core. Under the site-selective excitation in the ⁷F₀ → ⁵D₀ peaks, energy transfer between the sites has also been observed.     

Sensitized red luminescence from Bi co-doped Eu: ZnO-B2O3 glasses

Photoluminescence properties of Bi³⁺ co-doped Eu³⁺ containing zinc borate glasses have been investigated and the results are reported here. Bright red emission due to a dominant electric dipole transition ⁵D₀→⁷F₂ of the Eu³⁺ ions has been observed from these glasses. The nature of Stark components from the measured fluorescence transitions of Eu³⁺ ions reveal that the rare earth ions could take the lattice sites of C_s or lower point symmetry in the zinc borate glass hosts. The significant enhancement of Eu³⁺ emission intensity by 346 nm excitation (¹S₀→³P₁ of Bi³⁺ ions) elucidates the sensitization effect of co-dopant. The energy transfer mechanism between sensitizer (Bi³⁺) and activator (Eu³⁺) ions has been explained.     

二氧化锆纳米材料中Eu3+的发光特性

研究了掺1mol%Eu³⁺的二氧化锆纳米材料随退火温度变化的发光性质，得到退火温度为600和800℃的样品中Eu³⁺的⁵D₀→⁷F₂发射在604nm处，这种现象不多见. 几种经不同退火温度处理的纳米材料样品在紫外光的照射下，稀土离子Eu³⁺的⁵D₀→⁷F₂发射的发光逐 关键词： 二氧化锆 纳米材料 3+')" href="#">Eu³⁺ 发光     

Study of frequency upconversion in Yb<Superscript>3+</Superscript>/Eu<Superscript>3+</Superscript> by cooperative energy transfer in oxyfluoroborate glass matrix

Oxyfluoroborate glass co-doped with Eu and Yb ions has been prepared and characterized for its optical properties through photoluminescence, absorption and lifetime measurements. An intense red upconversion is observed from the ⁵D₀ level of Eu³⁺ ions through energy transfer from Yb³⁺ to Eu³⁺ ion when excited with 980 nm. The Judd–Ofelt parameters have been evaluated to estimate the local site symmetry around the Eu³⁺ ions. These parameters have been used to derive radiative properties such as transition probabilities, branching ratios, radiative lifetimes and stimulated emission cross-sections for the ⁵D₀–⁷F_J transitions. Decay of excitation of the ⁵D₀ level has been measured by monitoring the ⁵D₀→⁷F₂ transition (613 nm) at room temperature. Quantum efficiency for this transition is found to be 73%. We also monitored the effect of temperature on the fluorescence emission of Eu³⁺. PACS 42.70.Ce; 42.70.Hj     

Photophysics of RbCl co-doped with Eu2+ and Eu3+

Excitation and luminescence spectra of RbCl co-doped with divalent and trivalent europium ions are reported. Spectral dips appearing in the blue emission from Eu²⁺ are resulted from the radiative energy transfer from Eu²⁺ to Eu³⁺ and consequently induces the luminescence from Eu³⁺ that is responsible for the ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) transitions. The induced luminescence has been characterized as a function of temperature and a decay time. In addition, the polarized emission from RbCl doped with only Eu²⁺ is also reported.     

A novel scheme to acquire enhanced up-conversion emissions of Ho3+ and Yb3+ co-doped Sc2O3

A detailed investigation about the effect of Sc₂O₃: 1 mol%Ho³⁺/5 mol%Yb³⁺ co-doped with Ce⁴⁺ ions prepared by sol-gel methods was performed systematically. Under the excitation of 980 nm laser diode, both green emission (553 nm, ⁵F₄/⁵S₂→⁵I₈) and red emission (672 nm, ⁵F₅→⁵I₈) were both observed in the emission spectra of the samples, which were found to be two-photon process and sensitized by Yb³⁺ ions. With the increasing of Ce⁴⁺ ions, the up-conversion green emission intensity are increased by 6.52, 8.69, 10.85, 13.92 and 16.66 fold, corresponding to the Ce⁴⁺ ions concentrations from 5 mol% to 13 mol%, respectively. The number of photons are necessary to populate the upper emitting state decreases to 2 and the infrared absorption coefficient is reduced, when the Ce⁴⁺ ions concentration increase to 13 mol%. Ce⁴⁺ ions play an important role in tailoring the local crystal field around Ho³⁺ ions, lowering the highest phonon cut-off energy of matrix and reducing the infrared absorption coefficient, thus hindering the non-radiative processes, which contribute to the increased emission intensity. The excellent enhancement makes it a promising multifunctional optical luminescence material.     

SBN晶体中Eu3+激发态的能量传递

通过选择激发SBN晶体中处于不同晶场位的Eu³⁺离子,得到⁵D₀→⁷F₁的时间分辨荧光光谱,确定了不等价晶场位的离子间的能量转移速率。荧光峰随激发波数的变化表明局部晶场的连续畸变。 关键词：     

Quantum cutting abilities of sol-gel derived LiGdF4:Eu powders

Optical properties of europium doped LiGdF₄ (LGF) powders synthesized by the sol-gel process were investigated in the VUV range. Emission of two visible photons (due to ⁵D₀→⁷F_J transitions on two Eu³⁺ ions) per absorbed VUV photon was demonstrated indicating that a quantum cutting phenomenon takes place. This mechanism is explained by a two-step energy transfer when exciting Gd³⁺ ions in their ⁶G_J high energy level. Best luminescence efficiency was recorded at room temperature for samples with a doping rate of 5 mol% in europium ions. Effect of rare-earth concentration on internal quantum cutting efficiency was studied. Temperature dependence was also investigated and showed that the down-conversion process upon excitation at 202 nm becomes inefficient at low temperature since energy transfer from Gd³⁺ ions to Eu³⁺ ions is not effective any more. Such a result was connected with the thermal population at room temperature of Eu³⁺⁷F₁ state which is involves in the first step of the energy transfer.     

Local structure of Eu3+ ions in fluorophosphate laser glass

A fluorophosphate laser glass doped with 1.0 mol% of Eu³⁺ ions has been prepared and studied by site-selective spectroscopy to explore the local structure of Eu³⁺ ions. Site-selective ⁵ D ₀ → ⁷ F _1,2 emission spectra have been measured under resonant excitation to the ⁵ D ₀ level at different wavelengths within the ⁷ F ₀ → ⁵ D ₀ band at 16 K. Using the Stark level positions of the ⁷ F ₁ and ⁷ F ₂ levels, crystal-field analysis has been carried out. The results suggest the existence of a unique kind of site for all the environments of Eu³⁺ ions in this glass.     

Fluorescent properties of a green- to red-emitting Eu3+, Tb3+ codoped amorphous calcium silicate phosphor

A Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating a Eu³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction for 30 min at 900 °C. The excitation peak wavelength of the resulting phosphor was 379 nm and the emission peak wavelengths were at 542 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 613 mm, attributed to the ⁵D₀→⁷F₁ transition of Eu³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Eu/Tb atomic ratio of the Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from green to red. It was clarified that electron transfer from Tb³⁺ to Eu³⁺ is occurring.     

Excitation migration among inhomogeneously broadened levels of Eu3+ ions

Excitation migration between ⁵D₀ states of Eu³⁺ ions in Ca(PO₃)₂ glass is studied by using the technique of the selective excitation of the inhomogeneously broadened ⁵D₀ levels. In time-resolved emission spectra for ⁵D₀→⁷F₁ transition after the pulse excitation due to ⁷F₀→⁵D₀ transition by the use of a tunable dye laser at 77°K, a subpeak is observed to appear and to grow in intensity with increasing delay time, besides the main peak excited directly by the excitation light. The observed facts are explained by considering the phonon-assisted energy transfer between ⁵D₀ states involving an acoustic phonon. From the analysis of the results, the probability of the excitation migration due to the phonon-assisted process is estimated to be ≌ 10 A ms^-1. From the theoretical consideration, the rate of the linewidth change and the probability of the excitation migration due to the resonant transfer process are obtained. These results indicate that the phonon-assisted process is more dominant than the resonant process for the excitation migration in the system studied.     

Luminescence properties of NaGd(PO3)4:Eu3+ and energy transfer from Gd3+ to Eu3+

The luminescence properties of polyphosphates NaEu _x Gd_(1?x)(PO₃)₄ (x = 0–1.00) and the energy transfer from Gd³⁺ to Eu³⁺ were studied. In undoped NaGd(PO₃)₄ sample, the photon cascade emission of Gd³⁺ was observed under ⁸S_7/2 → ⁶G_J excitation (201 nm) in which the emission of a red photon due to ⁶G_J → ⁶P_J transition is followed by an ultraviolet photon emission due to ⁶P_J → ⁸S_7/2 transition. When part of Gd³⁺ ions in the host NaGd(PO₃)₄ were substituted by Eu³⁺ ions, the NaGd(PO₃)₄:Eu³⁺ sample showed intensive red emission under 172-nm vacuum-ultraviolet (VUV) excitation which is suitable for mercury-free fluorescent lamps and plasma display panel applications. Based on the VUV–visible spectroscopic characteristics and the luminescence decay properties of NaGd(PO₃)₄:Eu³⁺, it was found that the quantum cutting by a two-step energy transfer from Gd³⁺ to Eu³⁺ can improve the red emission of Eu³⁺ ions under VUV excitation but only a part of the excitation energy in the excited ⁶P_J states within Gd³⁺ ions can be transferred to Eu³⁺ ions for its red emission, and the nonradiative energy transfer efficiencies from the excited ⁶P_J states within Gd³⁺ to Eu³⁺ were calculated.     

The influence of Eu3+ doping on photoluminescent properties of red emitting phosphor YInGe2O7:Eu3+ by microwave assisted and conventional sintering method

This paper describes an investigation of the crystalline morphology and photoluminescent properties of YInGe₂O₇ powders doped with different Eu³⁺ concentrations using microwave assisted sintering and conventional sintering. X-ray powder diffraction analysis confirmed the formation of monoclinic YInGe₂O₇ structure as YInGe₂O₇:Eu³⁺ powders were sintered at 1200 °C in microwave furnace for 1 h, and the raw material phase of Y₂O₃ was observed when Eu³⁺ concentration was below 30 mol%. Scanning electron microscopy showed microwave assisted sintering results in smaller particle size and more uniform grain size distribution. In the photoluminescent (PL) studies, the concentration quenching effect was observed under the excitation at 393 nm, but not under the excitation at CTS band. The ⁵D₀→⁷F₂ transition (620 nm), exhibits a non-exponential decay behavior as YInGe₂O₇:Eu³⁺ powders were sintered by microwave with the Eu³⁺ concentration higher than 50 mol%.