On the Ellipticity of the Middle Surface of a Shell and its Application to the Asymptotic Analysis of ‘Membrane’ Shells

We consider a surface S = (), where ² is a bounded, connected, open set with a smooth boundary and : ³ is a smooth map; let () denote the components of the two-dimensional linearized strain tensor of S and let 0 with length 0 > 0. We assume the the norm ,|| ()||0, in the space V0() = { H¹() × H¹() × L²(); = 0 on 0 } is equivalent to the usual product norm on this space. We then establish that this assumption implies that the surface S is uniformly elliptic and that we necessarily have 0 = .     

Construction of exact numerical solutions of the stationary traveling wave type for viscous thin films

An effective numerical procedure, based on the Galerkin method, for finding solutions of the stationary traveling wave type in the complete formulation is proposed for the case of viscous liquid films. Examples of a viscous film flowing freely down a vertical surface have been calculated. The calculations have been made for various values of the dimensionless surface tension , including =0. The method makes it possible to predict a number of bifurcations that occur as decreases. The existence of numerous families of stationary traveling waves when 1 was demonstrated in [6]. The present study shows that as 1 all but one of these families of wave solutions disappear. The shape of the periodic and solitary waves and the pressure distribution in the film are found for various . When =0 and the wave number is fairly small, the periodic solution has a singularity, as predicted in [14]: at the crest of the wave a corner point appears; the angle between the tangents at this point =140–150. The method proposed can be used to calculate other wavy film flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 94–100, May–June, 1990.     

Control of low-speed turbulent separated flow using jet vortex generators

A parametric study has been performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulent flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and jet location (distance from the separation region in the free-stream direction). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed).Nomenclature C _p pressure coefficient, 2(P-P_)/V ² - C _Q total flow coefficient, Q/ v - D ₀ jet orifice diameter - Q total volumetric flow rate - R Reynolds number based on momentum thickness - u fluctuating velocity component in the free-stream (x) direction - V free-stream flow speed - VR ratio of jet speed to free-stream flow speed - x coordinate along the wall in the free-stream direction - jet inclination angle (angle between the jet axis and the wall) - jet azimuthal angle (angle between the jet axis and the free-stream direction in a horizontal plane) - boundary-layer thickness - momentum thickness - lateral distance between jet orifices A version of this paper was presented at the 12th Symposium on Turbulence, University of Missouri-Rolla, 24–26 Sept. 1990     

Existence theorem for a minimum problem with free discontinuity set

We study the variational problem Where is an open set in ⁿ ,n2gL ^q () L (), 1q<+, O<, <+ andH _n–1 is the (n–1)-dimensional Hausdorff Measure.     

On the sensitive dynamical system and the transition from the apparently deterministic process to the completely random process

The detailed analysis of the dynamical process of coin tossing is made. Through calculations, it is illustrated how and why the result is extremely sensitive to the initial conditions. It is also shown that, as the initial height of the mass center of the coin increases, the final configuration, i.e. head or tail, becomes more and more sensitive to the initial parameters (the initial velocity angular velocity, and the initial orientation), the coefficient of the air drag, and the energy absorption factor of the surface on which the coin bounces. If we keep the head upward initially but allow a small range for the change of some other initial parameters, the frequency that the final configuration is head, would be 1 if the initial height h of the mass center is sufficiently small, and would be clo to 1/2 if h is sufficiently large. An interesting question is how this frequency changes continuously from 1 to 1/2 as h increases. Detailed calculations show that such a transition is very similar to the transition from laminar to turbulent flows. A basic difference between the transition stage and the completely random stage is indicated: In the completely random stage, the deterministic process of the individual case is extremely sensitive to the initial conditions and the dynamical parameters, out the statistical properties of the ensemble are insensitive to the small changes of the initial conditions and the dynamical parameters. On the contrary, in the transition stage, both the deterministic process of the individual case and the statistical properties of the ensemble are sensitive to the initial conditions and the dynamical parameters. The mechanism for this feature of the transition stage is the existence of the long-train structure in the parameter space. The illuminations of this analysis on some other random phenomena are discussed.     

Outflow of an unexpanded jet into counter supersonic and subsonic flows

The article gives the results of an experimental investigation of the geometric structure of an opposing unexpanded jet. It discusses flow conditions with interaction between the jet and sub- and supersonic flows. It is shown that, with the outflow of an unexpanded jet counter to a supersonic flow, there are unstable flow conditions. For stable flow conditions with one roll, dependences are proposed determining the form of a jet in a supersonic opposing flow. A generalized dependence is obtained for the distribution of the pressure at the surface of a body with a jet, flowing out counter to a subsonic flow. The range of change in the determining parameters are the following: Mach numbers at outlet cross section of nozzle, M _a = 1 and 3; Mach numbers of opposing flow, M = 0.6–0.9 and 2.9; degree of effectiveness of jet, n = p _a /p = 0.5–800 (p _a and p are the static pressures at the outlet cross section of the nozzle and in the opposing flow); the ratios of the specific heat capacities, _a = = 1.4; the drag temperatures of the jet and the flow, T_o = T_oa = 290°K.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 89–96, January–February, 1977.     

Combined natural and forced convection in a laminar wall jet along a vertical plate with uniform surface heat flux

The steady state flow and heat transfer characteristics of the combined natural and forced convection in a two dimensional, laminar, incompressible wall jet over a vertical wall are obtained for constant wall heat flux boundary condition. The velocity and temperature distribution are assumed to be power series, where the zeroth term corresponds to that for a plane wall jet in the absence of buoyancy effects. Numerical results for the momentum and thermal series functions are presented for a Prandtl number of 0.73. Wall values of the momentum and thermal series functions are presented for Prandtl numbers ranging from 0.01 to 1000.Nomenclature Gr* modified Grashof number - k thermal conductivity - Nu Nusselt number - Pr Prandtl number - q _w heat flux at the wall - Re Reynolds number - T temperature - u velocity component in x-direction - v velocity component in y-direction - x co-ordinate along the plane wall - y co-ordinate normal to the wall - () gamma function - non-dimensional co-ordinate defined in (6) - non-dimensional temperature - dynamic viscosity - kinematic viscosity - non-dimensional co-ordinate defined in (6) - density - w values at the wall - values at large distances away from the wall     

Direct derivation of the two-shaft system balance conditions for the second order reciprocal inertia forces on the V-type eight cylinders internal combustion engines with a plane crankshaft

By employing the four shafts balance concept paper [1] has reported a balance regime for the second order reciprocal inertia forces on the V-type eight cylinder internal combustion engines with a plane crankshaft. Thereafter, paper [2] has acquired a two-shafts balance regime, but through a rather tedious roudabout degenerating manipulation. The present article has, but starting out directly from the two-shafts balance concept, successfully acquired the same results as those in paper [2]. In addition, we propose, herein, a third balance system which might be, in general, called the slipper balance regime.     

Structure of a supersonic jet with varied geometry of the nozzle entrance

The structure of a supersonic underexpanded lowpressureratio jet exhausted from a nozzle with variable geometry of the entrance section is experimentally studied. Total pressure distributions in the initial cross sections of the examined jets are obtained. Based on these distributions, the coordinates of the mixingregion boundaries are found. The curvature of streamlines in the mixing layer within the first two barrels of an underexpanded jet is determined. A dependence generalizing the measurement results on the curvature of streamlines in the first barrel of a weakly underexpanded jet is obtained in dimensionless coordinates.     

Analysis of suddenly started laminar flow in the entrance region of a circular tube

Suddenly started laminar flow in the entrance region of a circular tube, with constant inlet velocity, is investigated analytically by using integral momentum approach. A closed form solution to the integral momentum equation is obtained by the method of characteristics to determine boundary layer thickness, entrance length, velocity profile, and pressure gradient.Nomenclature M(, , ) a function - N(, , ) a function - p pressure - p* p/1/2U ², dimensionless pressure - Q(, , ) a function - R radius of the tube - r radial distance - Re 2RU/, Reynolds number - t time - U inlet velocity, constant for all time, uniform over the cross section - u velocity in the boundary layer - u* u/U, dimensionless velocity - u ₁ velocity in the inviscid core - x axial distance - y distance perpendicular to the axis of the tube - y* y/R, dimensionless distance perpendicular to the axis - boundary layer thickness - * displacement thickness - /R, dimensionless boundary layer thickness - momentum thickness - absolute viscosity of the fluid - /, kinematic viscosity of the fluid - x/(R Re), dimensionless axial distance - density of the fluid - tU/(R Re), dimensionless time - _w wall shear stress     

Study of transient and quasi-steady ablation of polytetrafluoroethylene layers

A study of the transient one-dimensional ablation of a PTFE-layer heated by a constant heat flux at the surface and cooled by finite heat transfer at the back is performed using a previously presented analytical model. The influences of various parameters upon the course of ablation are investigated and some limiting cases are discussed. The numerical solution for the quasi-steady ablation is presented by graphs, which are also approximated by correlations for the computation of the coupled boundary layer and PTFE-ablator.

---

Instationäre und quasi-stationäre Ablation von PTFE-Schichten

Zusammenfassung Die instationäre, eindimensionale Ablation einer PTFE-Schicht wird untersucht, der ein konstanter Wärmestrom an der Oberfläche zugeführt und ein Kühlstrom durch endlichen Wärmeübergang an der Rückseite abgeführt wird. Dabei wird ein analytisches Modell zugrundegelegt, über das kürzlich berichtet wurde, und verschiedene Einflüsse auf den Ablationsverlauf betrachtet sowie Grenzfälle diskutiert. Die numerische Lösung für quasistationäre Ablation kann Diagrammen entnommen werden. Außerdem werden hierfür Korrelationen angegeben für die simultane Berechnung des PTFE-Ablators mit einer Grenzschicht.

---

Nomenclature a thermal diffusivity - c polymer mass fraction: density ratio of the decomposing and the undecomposed material - k coefficient of heat transmission - m ablation rate (ablating mass flux) - q heat flux to the surface - Q dimensionless heat flux - t time - T temperature - x coordinate - x_O initial layer thickness - y₁ (x-)/(-), transformed coordinate - y₂ (x-)/(-), transformed coordinate - penetration bond - phase interface - thermal conductivity of crystalline PTFE at the melting point - layer thickness Indices k coolant - at the phase interface (melting point) - at the surface     

About the Regularized Navier–Stokes Equations

The first goal of this paper is to study the large time behavior of solutions to the Cauchy problem for the 3-dimensional incompressible Navier–Stokes system. The Marcinkiewicz space L^3, is used to prove some asymptotic stability results for solutions with infinite energy. Next, this approach is applied to the analysis of two classical regularized Navier–Stokes systems. The first one was introduced by J. Leray and consists in mollifying the nonlinearity. The second one was proposed by J.-L. Lions, who added the artificial hyper-viscosity (–)^{/ 2}, > 2 to the model. It is shown in the present paper that, in the whole space, solutions to those modified models converge as t toward solutions of the original Navier–Stokes system.     

On surface waves in generalized thermoelasticity

Knowles' representation theorem for harmonically time-dependent free surface waves on a homogeneous, isotropic elastic half-space is extended to include harmonically time-dependent free processes for thermoelastic surface waves in generalized thermoelasticity of Lord and Shulman and of Green and Lindsay.r , , r , , .This work was done when author was unemployed.     

Study of initial segment of turbulent jets of various gases in a parallel air stream

Results are presented of a study of the gasdynamic parameters and the geometric characteristics of the mixing zone of axisymmetric jets of gases of differing density (Freon-12, air, and helium) propagating in a parallel air stream, within the limits of the initial segment (0x/R3–30). Experimental data are presented on the effect of different densities (0. 27 n8.2) and velocities (0m1.7) of the gas jet and the parallel stream on the mixing process.     

Das erweiterte Korrespondenzgesetz für die dynamische Idealviskosität und die Idealwärmeleitfähigkeit reiner Stoffe

Zusammenfassung Zur Berechnung der dynamischen Idealviskosität Ideal (T) und der Idealwärmeleitfähigkeit ideal (T) benötigt man die kritische TemperaturT _kr, das kritische spezifische Volum _kr, die MolmasseM, den kritischen Parameter _kr und die molare isochore WärmekapazitätC _v(T). Sowohl das theoretisch, als auch das empirisch abgeleitete erweiterte Korrespondenzgesetz ergeben eine für praktische Zwecke ausreichende Genauigkeit für die Meßwertwiedergabe, die bei den assoziierenden Stoffen und den Quantenstoffen jedoch geringer ist als bei den Normalstoffen.

---

The extended correspondence law for the ideal dynamic viscosity and the ideal thermal conductivity of pure substances

For the calculation of the ideal dynamic viscosity Ideal (T) and the ideal thermal conductivity ideal (T) the critical temperatureT _kr, the critical specific volumev _kr, the molecular massM, the critical parameter _kr, and the molar isochoric heat capacityC _v(T) is needed. Not only the theoretically determined but also the empirically determined extended correspondence law gives for practical use a good representation of the measured data, which for the associating substances and the quantum substances is not so good as for the normal substances.

     

Dynamic melt viscoelastic behavior of random copolymers

Summary The viscoelastic properties of 65/35 styrenen-butyl methacrylate random copolymers were determined using the Eccentric Rotating Disks device of the Rheometrics Mechanical Spectrometer. Similar to the behavior observed in homopolymers, an increase in the molecular weight of the copolymer resulted in extension of the rubbery plateau and in a reduction in the terminal region. The dynamic complex viscosity showed onset of non-Newtonian flow at higher frequencies, with the non-Newtonian region increasing with increasing molecular weight.The elastic modulus,G, was dependent upon the frequency,, asG ^1.5 in the terminal region, rather than asG ² observed for polystyrene. The viscous modulus,G, was proportional to the frequency,, asG , similar to what is observed for polystyrene. The dynamic viscosity | ^*| at high frequencies showed a region independent of molecular weight where a power law of | ^*| ^0.9 is applicable, consistent with entanglement models. Thy dynamic viscosity at low frequencies in the Newtonian region is related to molecular weight as |^*| . Using WLF equations, the coefficient of expansion, _f , was obtained that, together with glass transition, showed a negative deviation from the Fox-Flory relationship.

---

Zusammenfassung Die viskoelastischen Eigenschaften von statistischen 65/35-Styrol/n-Butyl-Methacrylat-Kopolymeren wurden mit Hilfe einer Maxwell-Rheometer-Anordnung in Verbindung mit dem Mechanischen Spektrometer der Fa. Rheometrics bestimmt. Ähnlich dem bei Homopolymeren beobachteten Verhalten ergab sich auch hier mit wachsendem Molekulargewicht eine Verbreiterung des Kautschuk-Plateaus und eine Verkleinerung des Endbereichs. Die komplexe Viskosität zeigte erst bei höheren Frequenzen das Einsetzen nicht-newtonschen Fließens an, wobei der nichtnewtonsche Bereich mit steigendem Molekulargewicht größer wurde.Der SpeichermodulG ergab sich im Endbereich als proportional zu ^1,5, im Unterschied zu der bei Polystyrol beobachteten Proportionalität mit ². Dagegen war der VerlustmodulG der Frequenz direkt proportional, ähnlich wie es auch bei Polystyrol beobachtet worden war. Die dynamische Viskosität | ^*| zeigte unabhängig vom Molekulargewicht bei hohen Frequenzen einen Bereich, in dem eine Potenz-Beziehung | ^*| ~ ^0,9 herrschte, was auf die Wirkung von Verzweigungen hindeutet. Dagegen galt bei den niedrigen Frequenzen des newtonschen Bereichs|^*| ~ . Mit Hilfe der WLF-Gleichung wurde der Ausdehnungskoeffizient _f bestimmt, der ebenso wie der Glasübergang eine negative Abweichung von der Fox-Flory-Beziehung zeigte.

---

---

With 10 figures and 1 table     

Calculation of heat transfer accompanying hypersonic three-dimensional flow of air over slender blunt-nosed cones

The effective length method [1, 2] has been used to make systematic calculations of the heat transfer for laminar and turbulent boundary layers on slender blunt-nosed cones at small angles of attack ( + 5° in a separationless hypersonic air stream dissociating in equilibrium (half-angles of the cones 0 20°, angles of attack 0 15°, Mach numbers 5 M 25). The parameters of the gas at the outer edge of the boundary layer were taken equal to the inviscid parameters on the surface of the cones. Analysis of the results leads to simple approximate dependences for the heat transfer coefficients.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 173–177, September–October, 1981.     

Two-phase flow in heterogeneous porous media II: Numerical experiments for flow perpendicular to a stratified system

In this work, we make use of numerical experiments to explore our original theoretical analysis of two-phase flow in heterogeneous porous media (Quintard and Whitaker, 1988). The calculations were carried out with a two-region model of a stratified system, and the parameters were chosen be consistent with practical problems associated with groundwater flows and petroleum reservoir recovery processes. The comparison between theory (the large-scaled averaged equations) and experiment (numerical solution of the local volume averaged equations) has allowed us to identify conditions for which the quasi-static theory is acceptable and conditions for which a dynamic theory must be used. Byquasi-static we mean the following: (1) The local capillary pressure,everywhere in the averaging volume, can be set equal to the large-scale capillary pressure evaluated at the centroid of the averaging volume and (2) the large-scale capillary pressure is given by the difference between the large-scale pressures in the two immiscible phases, and is therefore independent of gravitational effects, flow effects and transient effects. Bydynamic, we simply mean a significant departure from the quasi-static condition, thus dynamic effects can be associated with gravitational effects, flow effects and transient effects. To be more precise about the quasi-static condition we need to refer to the relation between the local capillary pressure and the large-scale capillary pressure derived in Part I (Quintard and Whitaker, 1990). Herep _c ¦_y represents the local capillary pressure evaluated at a positiony relative to the centroid of the large-scale averaging volume, and {p _c }¦_x represents the large-scale capillary pressure evaluated at the centroid.In addition to{p _c } ^c being evaluated at the centroid, all averaged terms on the right-hand side of Equation (1) are evaluated at the centroid. We can now write the equations describing the quasi-static condition as , , This means that the fluids within an averaging volume are distributed according to the capillary pressure-saturation relationwith the capillary pressure held constant. It also means that the large-scale capillary pressure is devoid of any dynamic effects. Both of these conditions represent approximations (see Section 6 in Part I) and one of our main objectives in this paper is to learn something about the efficacy of these approximations. As a secondary objective we want to explore the influence of dynamic effects in terms of our original theory. In that development only the first four terms on the right hand side of Equation (1) appeared in the representation for the local capillary pressure. However, those terms will provide an indication of the influence of dynamic effects on the large-scale capillary pressure and the large-scale permeability tensor, and that information provides valuable guidance for future studies based on the theory presented in Part I.Roman Letters A scalar that maps {}*/t onto - A scalar that maps {}*/t onto - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - a vector that maps ({}*/t) onto , m - a vector that maps ({}*/t) onto , m - b vector that maps ({p}– g) onto , m - b vector that maps ({p}– g) onto , m - B second order tensor that maps ({p}– g) onto , m² - B second order tensor that maps ({p}– g) onto , m² - c vector that maps ({}*/t) onto , m - c vector that maps ({}*/t) onto , m - C second order tensor that maps ({}*/t) onto , m² - C second order tensor that maps ({}*/t) onto . m² - D third order tensor that maps ( ) onto , m - D third order tensor that maps ( ) onto , m - D second order tensor that maps ( ) onto , m² - D second order tensor that maps ( ) onto , m² - E third order tensor that maps () onto , m - E third order tensor that maps () onto , m - E second order tensor that maps () onto - E second order tensor that maps () onto - p _c =(), capillary pressure relationship in the-region - p _c =(), capillary pressure relationship in the-region - g gravitational vector, m/s² - largest of either or - - - i unit base vector in thex-direction - I unit tensor - K local volume-averaged-phase permeability, m² - K local volume-averaged-phase permeability in the-region, m² - K local volume-averaged-phase permeability in the-region, m² - {K } large-scale intrinsic phase average permeability for the-phase, m² - K –{K }, large-scale spatial deviation for the-phase permeability, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K ^* large-scale permeability for the-phase, m² - L characteristic length associated with local volume-averaged quantities, m - characteristic length associated with large-scale averaged quantities, m - I _i i = 1, 2, 3, lattice vectors for a unit cell, m - l characteristic length associated with the-region, m - ; characteristic length associated with the-region, m - l _H characteristic length associated with a local heterogeneity, m - - n unit normal vector pointing from the-region toward the-region (n =–n ) - n unit normal vector pointing from the-region toward the-region (n =–n ) - p pressure in the-phase, N/m² - p local volume-averaged intrinsic phase average pressure in the-phase, N/m² - {p } large-scale intrinsic phase average pressure in the capillary region of the-phase, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - P _c p –{p }, capillary pressure, N/m² - {p_c}^c large-scale capillary pressure, N/m² - r ₀ radius of the local averaging volume, m - R ₀ radius of the large-scale averaging volume, m - r position vector, m - , m - S /, local volume-averaged saturation for the-phase - S ^* {}*{}*, large-scale average saturation for the-phaset time, s - t time, s - u , m - U , m² - v -phase velocity vector, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - {v } large-scale intrinsic phase average velocity for the-phase in the capillary region of the-phase, m/s - {v } large-scale phase average velocity for the-phase in the capillary region of the-phase, m/s - v –{v }, large-scale spatial deviation for the-phase velocity, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - V local averaging volume, m³ - V volume of the-phase in, m³ - V large-scale averaging volume, m³ - V capillary region for the-phase within, m³ - V capillary region for the-phase within, m³ - V _c intersection of m³ - V volume of the-region within, m³ - V volume of the-region within, m³ - V () capillary region for the-phase within the-region, m³ - V () capillary region for the-phase within the-region, m³ - V () , region in which the-phase is trapped at the irreducible saturation, m³ - y position vector relative to the centroid of the large-scale averaging volume, m Greek Letters local volume-averaged porosity - local volume-averaged volume fraction for the-phase - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region (This is directly related to the irreducible saturation.) - {} large-scale intrinsic phase average volume fraction for the-phase - {} large-scale phase average volume fraction for the-phase - {}* large-scale spatial average volume fraction for the-phase - –{}, large-scale spatial deviation for the-phase volume fraction - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - a generic local volume-averaged quantity associated with the-phase - mass density of the-phase, kg/m³ - mass density of the-phase, kg/m³ - viscosity of the-phase, N s/m² - viscosity of the-phase, N s/m² - interfacial tension of the - phase system, N/m - , N/m - , volume fraction of the-phase capillary (active) region - , volume fraction of the-phase capillary (active) region - , volume fraction of the-region ( + =1) - , volume fraction of the-region ( + =1) - {p }– g, N/m³ - {p }– g, N/m³     

Effect of Streamwise Streaky Structures on Turbulization of a Circular Jet

Experimental investigations of the influence of streamwise streaky structures on turbulization of a circular laminar jet are described. The qualitative characteristics of jet evolution are studied by smoke visualization of the flow pattern in the jet and by filming the transverse and longitudinal sections of the jet illuminated by the laser sheet with image stroboscopy. It is shown that the streaky structures can be generated directly at the nozzle exit, and their interaction with the Kelvin–Helmholtz ring vortices leads to emergence of azimuthal beams ( structures) by a mechanism similar to threedimensional distortion of the twodimensional Tollmien–Schlichting wave at the nonlinear stage of the classical transition in nearwall flows. The effect of the jetexhaustion velocity and acoustic action on jet turbulization is considered.     

Flow in porous media II: The governing equations for immiscible,two-phase flow

The Stokes flow of two immiscible fluids through a rigid porous medium is analyzed using the method of volume averaging. The volume-averaged momentum equations, in terms of averaged quantities and spatial deviations, are identical in form to that obtained for single phase flow; however, the solution of the closure problem gives rise to additional terms not found in the traditional treatment of two-phase flow. Qualitative arguments suggest that the nontraditional terms may be important when / is of order one, and order of magnitude analysis indicates that they may be significant in terms of the motion of a fluid at very low volume fractions. The theory contains features that could give rise to hysteresis effects, but in the present form it is restricted to static contact line phenomena.Roman Letters (, = , , and ) A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the -phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - g gravity vector, m²/s - H mean curvature of the- interface, m^–1 - H area average of the mean curvature, m^–1 - H – H , deviation of the mean curvature, m^–1 - I unit tensor - K Darcy's law permeability tensor, m² - K permeability tensor for the-phase, m² - K viscous drag tensor for the-phase equation of motion - K viscous drag tensor for the-phase equation of motion - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - n unit normal vector pointing from the-phase toward the-phase (n = –n ) - p _c p – P , capillary pressure, N/m² - p pressure in the-phase, N/m² - p intrinsic phase average pressure for the-phase, N/m² - p – p , spatial deviation of the pressure in the-phase, N/m² - r ₀ radius of the averaging volume, m - t time, s - v velocity vector for the-phase, m/s - v phase average velocity vector for the-phase, m/s - v intrinsic phase average velocity vector for the-phase, m/s - v – v , spatial deviation of the velocity vector for the-phase, m/s - V averaging volume, m³ - V volume of the-phase contained within the averaging volume, m³ Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m² - surface tension of the- interface, N/m - viscous stress tensor for the-phase, N/m² - / kinematic viscosity, m²/s