Liquid crystalline dendrimers containing photoactive cinnamate units

Cinnamate‐containing dendrimers have been prepared by peripheral functionalization of the amine groups of a poly(propyleneimine) dendrimer with 4‐methoxycinnamate‐ or 4‐(N,N‐dimethylamino)cinnamate‐derived units and/or 4‐cyanobiphenyl units in different proportions. The synthesis, full characterization in solution, thermal properties and optical properties of the novel monomers, homodendrimers and codendrimers are reported. The composition of the molecular structure of the codendrimers has been elucidated by matrix assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). These liquid crystalline dendrimers display lamellar SmA mesophases. The codendrimers have been tailored in such a way that the photoactive units and the liquid crystal units absorb in different regions in order to allow better control over the processes induced by light. Linearly polarized UV light irradiation studies performed on thin films of the cinnamate codendrimers show that they are photoresponsive. A photoinduced anisotropy is generated with increasing exposure time, but in‐plane amplification of anisotropy by thermal annealing in the mesophase was not observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New Liquid Crystalline Materials Based on Two Generations of Dendronised Cyclophosphazenes

A divergent approach was used for the synthesis of dendritic structures based on a cyclotriphosphazene core with 12 or 24 hydroxyl groups, by starting from [N₃P₃(OC₆H₄OH‐4)₆] and using an acetal‐protected 2,2‐di(hydroxymethyl)propionic anhydride as the acylating agent. Hydroxyl groups in these first‐ and second‐generation dendrimers, G1‐(OH)₁₂ or G2‐(OH)₂₄ , were then condensed in turn with mono‐ or polycatenar pro‐mesogenic acids to study their ability to promote self‐assembly into liquid crystalline structures. Reactions were monitored by using ³¹P{¹H} and ¹H NMR spectroscopy and the chemical structure of the resulting materials was confirmed by using different spectroscopic techniques and mass spectrometry (MALDI‐TOF MS). The results were in accordance with monodisperse, fully functionalised cyclotriphosphazene dendrimers. Thermal and liquid crystalline properties were studied by using optical microscopy, differential scanning calorimetry and X‐ray diffraction. The dendrimer with 12 4‐pentylbiphenyl mesogenic units gives rise to columnar rectangular organisation, whereas the one with 24 pentylbiphenyl units does not exhibit mesomorphic behaviour. In the case of materials that contain polycatenar pro‐mesogenic units with two aromatic rings ( A4 vs. A5 ), the incorporation of a short flexible spacer connected to the periphery of the dendron (acid A5 ) was needed to achieve mesomorphic organisation. In this case, both dendrimer generations G1 A5 and G2 A5 exhibit a hexagonal columnar mesophase.     

Synthesis,mesomorphic behaviour and optoelectronic properties of phosphorus-based thermotropic liquid crystalline dendrimers

A new series of thermotropic phosphorus-based liquid crystalline (LC) dendrimers based on a thiophosphoryl-phenoxymethyl(methylhydrazono) core (thiophosphoryl-PMMH) up to the fifth generation has been synthesised by solution condensation of aldehyde groups, surface-functionalised thiophosphoryl-PMMH dendritic substrates of generation numbers G_0.5 to G_5.5, with the appropriate molar equivalents of the pro-mesogenic n-hexadecylaniline mono-functional building block. Their chemical composition has been confirmed by ¹H/¹³C/³¹P nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis. Optical properties have been studied by ultraviolet-visible absorption, photoluminescence spectroscopy and polarised optical microscopy, and thermal characteristics by differential scanning calorimetry. Electrical studies have been made using the current-voltage characteristics of organic light-emitting diodes consisting of multi-layered indium tin oxide/dendrimer/aluminium tris(8-hydroxyquinoline)Al architecture. It has been demonstrated that the molecular engineering approach adopted can successfully lead to phosphorus-containing dendritic organic semiconductors (OSCs) which show tunable mesomorphic behaviour (extension of the observed smectic mesophase) and (opto) electronic properties, owing to their peripheral decoration with a tunable number of azomethine-based optically active chromophoric units. This rare combination of ‘tunable by design’ properties makes this series of thermostable thiophosphoryl-PMMH-based LC dendrimers a particularly appealing class of OSCs for use in optically and/or electronically active layers of (opto)electronic devices such as light-emitting diodes, field-effect transistors, solar cells and lasers.     

Synthesis and thermal behavior of Janus dendrimers,part 2

The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures (T_d) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite sides display liquid crystalline phases with exception of 3,5-type G1 dendrimer; while acetonide terminated dendrimers displayed merely melting transitions. Dendrimers having terminal alkyl chains at positions 3,4 or 3,4,5 in aromatic moieties exhibited enantiotropic mesophases. However, the thermal behavior of the dendrimers with 3,5-substitution pattern was different: the 3,5-type G1 dendrimer exhibit a lack of mesomorphic transition, and in the case of the 3,5-type G2 dendrimer, the mesophase was absent in the first heating scan but was observed during the subsequent cooling and heating scans at the rate of 10 °C/min.     

Multifunctional Supramolecular Dendrimers with an s‐Triazine Ring as the Central Core: Liquid Crystalline,Fluorescence and Photoconductive Properties

Novel liquid crystal (LC) dendrimers have been synthesised by hydrogen bonding between an s‐triazine as the central core and three peripheral dendrons derived from bis(hydroxymethyl)propionic acid. Symmetric acid dendrons bearing achiral promesogenic units have been synthesised to obtain 3:1 complexes with triazine that exhibit LC properties. Asymmetric dendrons that combine the achiral promesogenic unit and an active moiety derived from coumarin or pyrene structures have been synthesised in order to obtain dendrimers with photophysical and electrochemical properties. The formation of the complexes was confirmed by IR and NMR spectroscopy data. The liquid crystalline properties were investigated by differential scanning calorimetry, polarising optical microscopy and X‐ray diffractometry. All complexes displayed mesogenic properties, which were smectic in the case of symmetric dendrons and their complexes and nematic in the case of asymmetric dendrons and their dendrimers. A supramolecular model for the lamellar mesophase, based mainly on X‐ray diffraction studies, is proposed. The electrochemical behaviour of dendritic complexes was investigated by cyclic voltammetry. The UV/Vis absorption and emission properties of the compounds and the photoconductive properties of the dendrons and dendrimers were also investigated     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

Connector type‐controlled mesophase structures in poly(propyl ether imine) dendritic liquid crystals of identical dendrimer generations

Poly(propyl ether imine) (PETIM) dendrimers of one to three generations are used as dendritic cores to identify the influence of varying connector types that connect the dendritic core with peripheral mesogens on the emerging liquid crystalline (LC) properties. The LC properties vary in these dendritic liquid crystals, even when the dendrimer generations and thus the number of peripheral mesogenic moieties remain identical. PETIM dendrimer generations one to three, ester and amide connectors varying with succinates, phthalates, and succinamides, are studied herein. Cholesteryl moieties are installed at the peripheries through the above connectors to induce mesogenic properties. These modified dendritic liquid crystals reveal a layered mesophase structure in most ester and amide connector‐derivatives, whereas a third‐generation phthalate ester dendrimer favors a rectangular columnar mesophase structure. A transition from layered to a rectangular columnar structure results by a mere change in the connector varying between a succinate or succinamide or phthalate, within one particular dendrimer generation and without altering the underlying dendrimer core or the number of mesogenic moieties. The study demonstrates that in dendritic liquid crystals with essentially identical chemical constitutions, a change in the connector type connecting the mesogen with the dendrimer core is sufficient to change the mesophase structures. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3665–3678     

端基含4个丁氧基苯介晶基元光致变色液晶树状物的合成、结构及液晶性研究

合成了周边含4个丁氧基偶氮苯介晶基元(M5)端基新的零代光致变色液晶树状物(D0),并用元素分析、核磁共振、基质辅助激光解吸飞行时间质谱、红外、紫外、偏光显微镜、差示扫描量热(DSC)和广角X射线衍射法(WAXD)表征.D0显示向列相,与M5相同,树状物相态由介晶基元相态所决定,D0的相行为:K138N147I145N118K.对零代(D0)、一代(D1)、二代(D2)和三代(D3)液晶树状物的清亮焓、清亮熵、熔化焓和熔化熵进行了比较.     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

端基含108个己氧基偶氮苯介晶基元三代树状碳硅烷液晶研究

用发散法合成以四碳硅烷为核心,周边含108个己氧基偶氮苯介晶基元(M3)端基的三代树状碳硅烷(D3)液晶,并用元素分析、核磁共振、激光解吸电离飞行时间质谱、红外光谱、紫外光谱、偏光显微镜、差示扫描量热(DSC)和X射线衍射法(WAXD)进行表征.D3为向列相液晶,与M3相同,三代(D3)、二代(D2)和一代(D1)树状物的相态由介晶基元的相态决定.D3的液晶态相行为是K79N136I132N,D3的熔点比M3的低19℃,D3的清亮点比M3的增加16℃,D3液晶态温区比M3宽35℃.     

A Novel Pentaerythritol-based Carbosilane Liquid Crystalline Dendrimer Containing 12 Nitroazobenzene Groups on the Periphery

A novel liquid crystalline dendrimer with peripheral mesogenic units was successfully prepared. Azo-reaction and Williamson synthesis were employed in the preparation of the mesogenic unit 4-[4-(6-hydroxyhexyloxy)-phenylazo]nitrobenzene (M-NO2). A terminal Si-Cl functional carbosilane dendrimer based on pentaerythritol was used as dendritic scaffold and subsequently functionalized with the aforementioned groups. Investigation of the liquid crystalline properties of the mesogen-functionalized dendrimer PCSi-IG-NO2 by polarizing optical microscopy, DSC, and X-ray diffraction showed that it exhibits smectic E (SE) phase, different from the corresponding mesogenic unit, which shows nematic phase. Furthermore, the temperatures of both the melting point and the clearing point of the mesogen-functionalized dendrimer decrease, and the temperature region of the SE phase is wider than that of the nematic phase.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

Studies on thermotropic main chain liquid crystalline segmented polyurethanes I. Synthesis and properties of polyurethanes from high aspect ratio mesogenic diol as chain extender

Thermotropic main chain liquid crystalline polyurethanes were prepared from 4-{[4-(6-hydroxyhexyloxy)phenylimino]methyl}benzoic acid 4-{[4-(6-hydroxyhexyloxy)phenylimino]methyl}phenyl ester (mesogenic diol) and 1,6-hexamethylene di-isocyanate. The effects of partial replacement of the mesogenic diol by 20-50 mol% of poly(tetramethylene oxide)glycol (PTMG) of varying molecular mass (M _n =650, 1000, 2000) on the liquid crystalline properties were studied. Structural characterization was carried out by FTIR spectroscopy and the molecular mass distribution was determined by GPC. Differential scanning calorimetry and hot stage polarizing optical microscopy were used to study the mesomorphic properties. It was observed that the partial replacement of the mesogenic diol by PTMG of varying molecular masses influenced the phase transitions and the occurrence of mesophase textures. When the molecular mass of PTMG was enhanced, a higher content of mesogenic agent was needed to obtain liquid crystalline properties.     

Cyclam‐Cored Dendrimers Appended with Four Dendrons of Two Different Types: Intradendrimer Energy Transfer

We have synthesized two cyclam‐cored dendrimers appended with dendrons of two different types by proper protection/deprotection of the cyclam unit. The resulting dendrimers contain six naphthyl and two dansyl units ( N6 D2 ) or two dansyl and six naphthyl units ( N2 D6 ) at the periphery. Their photophysical properties have been compared to those of a dendrimer containing 8 dansyl units ( D8 ) and a previously investigated dendrimer containing 8 naphthyl units ( N8 ). The absorption spectra are those expected on the basis of the number of chromophores, demonstrating that no ground state interaction takes place. The emission spectra of N2 D6 and N6 D2 show naphthalene localized and naphthalene excimer emission similar to those observed in the case of N8 , together with a much stronger dansyl emission with maximum at 525 nm. Addition of CF₃SO₃H to dendrimer solutions in CH₃CN/CH₂Cl₂ 1:1 (v/v) leads to protonation of the aliphatic amine units of the cyclam core at first and then of the aromatic amine of each dansyl chromophores. Cyclam can be diprotonated and this affects dansyl absorption and, most significantly, emission bands by a charge perturbation effect. Each dansyl unit is independently protonated in both dendrimers. The most interesting photophysical feature of these heterofunctionalized cyclam‐cored dendrimers is the occurrence of an intradendrimer photoinduced energy transfer from naphthyl to dansyl chromophores of two different dendrons (interdendron mechanism). The efficiency of this process is 50 % for N6 D2 and it can be increased up to 75 % upon protonation of the cyclam core and formation of N6 D2 (2H⁺). This arises from the fact that protonation of the amine units of the cyclam prevents formation of exciplexes upon naphthyl excitation, thus shutting down one of the deactivation processes of the fluorescent naphthyl excited state.     

Ionic liquid crystals derived from the protonation of poly(propylene imine) dendrimers with a cholesterol-based carboxylic acid

The liquid crystalline character of salts resulting from the interaction of poly(propylene imine) dendrimers with 3-cholesteryloxycarbonylpropanoic acid has been studied. The supramolecular structure and consequently the observed liquid crystalline phases are dictated by the degree of protonation of primary amino groups as compared with that of tertiary ones, determined by FTIR spectroscopy in the bulk and by NMR spectroscopy in solution. Glass transition temperatures of the materials are about 38°C. At higher temperatures they are transformed to smectic C* phases while a second-order smectic C phase to smectic A phase transition is observed between 90 and 110°C depending on dendrimer generation. At about 150°C the onset of degradation is observed. The influence of the ionic dendrimeric scaffold on the thermotropic properties is discussed.     

Ionic liquid crystals derived from the protonation of poly(propylene imine) dendrimers with a cholesterol-based carboxylic acid

The liquid crystalline character of salts resulting from the interaction of poly(propylene imine) dendrimers with 3-cholesteryloxycarbonylpropanoic acid has been studied. The supramolecular structure and consequently the observed liquid crystalline phases are dictated by the degree of protonation of primary amino groups as compared with that of tertiary ones, determined by FTIR spectroscopy in the bulk and by NMR spectroscopy in solution. Glass transition temperatures of the materials are about 38°C. At higher temperatures they are transformed to smectic C* phases while a second-order smectic C phase to smectic A phase transition is observed between 90 and 110°C depending on dendrimer generation. At about 150°C the onset of degradation is observed. The influence of the ionic dendrimeric scaffold on the thermotropic properties is discussed.     

Luminescent Iridium-containing liquid crystalline polymers in the side chain

Luminescent liquid crystalline polymers consisting of Iridium attached to polysiloxanes are prepared. 4-Cyanophenyl 4-(allyloxy) benzoate (M₁) and an Iridium complex (Ir-M₂) grafted to poly(methylhydrogeno)siloxane are used for the preparation of the Iridium-containing liquid crystalline polymers. The chemical structures are characterised by Fourier transform infrared spectroscopy and ¹H NMR. The mesomorphic properties and phase behaviour are investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy and X-ray diffraction. The polymers containing <1.2 mol% of the Iridium ions reveal reversible mesomorphic phase transition, wide mesophase temperature ranges and high thermal stability. The introduction of the Iridium ions does not change the liquid crystalline state of polymer systems; on the contrary, the polymers are enabled with the luminescent properties. With the Iridium ion contents ranging between 0.3 and 1.2 mol%, luminescent intensity of polymers gradually increased. The temperature dependence of luminescent intensity was studied in the liquid crystalline phase.     

Discotic liquid crystalline poly(propylene imine) dendrimers based on triphenylene

The design, synthesis, and mesomorphic properties of a new series of homodendrimers consisting of the commercially available poly(propylene imine) (PPI) dendrimers (G = 1-5), PPI-(NH(2))(n)() (n = 4, 8, 16, 32, 64), functionalized with a discotic triphenylene moiety are reported. The liquid crystalline behavior was investigated by means of differential scanning calorimetry (DSC), polarizing-light optical microscopy (POM), and X-ray diffractometry (XRD). All of the homodendrimers showed mesomorphic properties, with the second to fifth generations giving a hexagonal columnar mesophase (Col(h)) and the first generation a rectangular columnar mesophase (Col(r)). The X-ray study reveals that these mesophases show a highly ordered structure with segregation of triphenylenes and dendrimers into separate columns and a regular stacking distance inside the triphenylene columns. GPC analysis showed that the dendrimers had good monodispersity and MALDI-TOF studies of the first three generations gave good evidence that all of the terminal amino groups of the dendrimers were functionalized with a discotic unit.     

A New Conformationally Symmetrical Calix[4]pyrrole Based Supramolecular System for Liquid Crystalline and Window Layer Solar Cell Applications

The newly symmetrical liquid crystalline compounds (CPB₁ – CPB₄) based on calix[4]pyrrole as central rigid core are synthesized via esterification reaction. All the four functionalized compounds exhibit columnar hexagonal phase (Col_h) over a higher mesophase temperature range and further stabilized mesophase upto room temperature. The thermal behavior and optical texture are identified by using differential scanning calorimetry (DSC), Polarizing optical microscopy (POM) while the molecular organization of compound in mesogenic state by X-ray diffraction technique. The molecular system based on calix[4]pyrrole core with symmetrical nature exhibited columnar type self-assembly at room temperature. All these four supramolecules with different side spacer show higher thermal stability. Based upon the optimization, compound CPB₂ has been further tested to implicate as optical window layer in thin films solar cell devices. The calix[4]pyrrole functionalized supramolecular liquid crystalline compound based thin films showed suitable transmittance, optical energy band gap together with absorbance and extinction coefficient. The linear dependence of current on the voltage demonstrated Ohmic behavior of the CPB₂ films. The surface morphology to the developed samples designated nearly uniform deposition of the CPB₂ thin films together with grain growth. The findings warrant suitability of the films to implicate these as an eco-friendly optical window layer in thin films based solar cells.     

Vinyl‐terminated liquid‐crystalline dendrimers based on dendritic polyols and their siloxane‐based elastomers

A new series of side‐chain liquid‐crystalline dendrimers (LCDs) by grafting vinyl‐terminated phenyl benzoate‐based promesogens to a novel polypropyleneimine‐derived dendritic polyols are reported. Polarized optical microscopy and X‐ray diffraction studies show that both the compounds display a smectic‐A (SmA) mesophase. The second‐generation dendrimer bearing eight‐branched promesogens exhibits a more stable SmA mesophase with a wide mesomorphic temperature range. It is demonstrated that “promoting groups” in the structure of LCD for the enhancement of mesomorphic stability are unnecessary in the case of strong anisotropic interactions. In contrast to conventional LCDs, these two compounds possess reactive vinyl terminals that endow them with the potential for the preparation of polymeric materials. For the first time, a type of thermoset elastomers is explored from LCDs via hydrosilylation crosslinking reaction of vinyl terminals and siloxane crosslinker. Two‐dimensional X‐ray diffraction study indicates that the lamellar structures of original dendrimers are reserved in the elastomer networks. Stress–strain curves reveal that these elastomers exhibit excellent elasticity under successive uniaxial compression. The combination of anisotropic structures of rigid units and elasticity of flexible networks in this novel series of elastomers makes them promising candidates for the application in artificial muscles or cartilages. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013