Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide

New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine,（4-（4-（2,6-diphenylpyridin-4yl）phenoxy）phenyl）-3,5-diaminobezamide（DPDAB）, and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate（TPP） and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR,¹H-NMR,UV-Vis spectroscopy, fluorimetry and elemental analysis.The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g.All the polymers exhibited solubility in common polar aprotic solvents such as NMP,DMAc,DMF,DMSO,pyridine,HMPA,and even in less polar solvents such as THF and m-cresol at room temperature.Thermal properties of polyamides were evaluated by means of DSC,DMTA and TGA.These polymers showed glass transition temperatures（T_g） in the range of 138-210℃. Their initial decomposition temperature（T_i） varied from 265℃to 310℃under N₂.The dilute solution（0.2 g/dL） of polyamides in DMF exhibited fluorescence emission withλ_max in the range of 470-550 nm.     

Microwave-assisted clean synthesis of aromatic photoactive polyamides derived from 5-(3-acetoxynaphthoylamino)-isophthalic acid and aromatic diamines in ionic liquid

Dicarboxylic acid, 5-(3-acetoxynaphthoylamino)isophthalic acid was prepared in three steps. The direct polycondensation of this novel diacid with several aromatic diamines was studied in 1,3-diisopropylimidazolium bromide as an ionic liquid (IL) under microwave irradiation and conventional heating. The polymerization reaction was effectively preceded in IL, and triphenyl phosphite as an activating agent, and the resulting novel photoactive polyamides were obtained in high yields and moderate inherent viscosities in the range of 0.44-0.69 dL/g. Thermogravimetric analysis showed that polymers are thermally stable, 10% weight loss temperatures in excess of 390 and 470 °C, and char yields at 600 °C in nitrogen higher than 60%. These macromolecules exhibited maximum UV-vis absorption at 265 and 300 nm in N,N-dimethylformamide (DMF) solution. Their photoluminescence in DMF solution demonstrated fluorescence emission maxima around 361 and 427 nm for all of the polyamides. It is very important to note that, because of, high polarizability of ILs, they are very good solvents for absorbing microwaves.     

Structure-property relationships for novel wholly aromatic polyamide-hydrazides containing various proportions of para-phenylene and meta-phenylene units: I. Synthesis and characterization

A series of novel wholly aromatic polyamide-hydrazides was synthesized by a low temperature solution polycondensation reaction of either 4-amino-3-hydroxybenzhydrazide or 3-amino-4-hydroxybenzhydrazide with an equimolar amount of either terephthaloyl chloride (TCl), isophthaloyl chloride (ICl), or mixtures of various molar ratios of TCl and ICl in anhydrous N,N-dimethylacetamide (DMAc) as a solvent. Polymer structures were identified by elemental analysis and infrared spectroscopy. All the polymers have the same structural formula except the way of linking phenylene units inside the polymer chain. The content of para- and meta-phenylene moieties was varied within this series so that the changes in the latter were 10 mol % from polymer to polymer, starting from an overall content of 0-100 mol %. The prepared polymers were characterized for their properties in order to acquire clear understanding of the influence exerted by controlled structural variations in these polymers upon some of important properties, such as solubility, intrinsic viscosity, moisture regain, mechanical properties and thermal as well as thermo-oxidative stability. The polymers were readily soluble in several organic polar solvents such as DMAc, N,N-dimethylformamide, dimethyl sulphoxide, N-methyl-2-pyrrolidone and hexamethyl phosphoramide and could be cast into flexible films. Their solubilities were found to increase remarkably with introduction of meta-phenylene moieties into the polymer chains. Their intrinsic viscosities ranged from 0.73 to 4.83 dl g⁻¹ in DMAc at 30 °C and increased with the increase of para-phenylene units content. Mechanical properties of the films produced from these polymers are improved markedly by substitution of para-phenylene units for meta-phenylene units. Thermogravimetric studies revealed that the completely para-oriented type of polymer has better thermal and thermo-oxidative stability relative to that of the other polymers. Moreover, the results reveal that the prepared polymers have a great affinity to water sorption. The hydrophilic character increases as a function of meta-oriented phenylene rings incorporated into the polymer chains.     

A novel route for synthesizing esters and polyesters from the Diels-Alder adduct of levopimaric acid and acrylic acid

A novel route for the esterification of the Diels-Alder adduct between abietic acid, in its isomer form of levopimaric acid, and acrylic acid was established. The high purity Diels-Alder adduct was prepared starting from rosin acids. When the adduct was subjected to a condensation reaction in the presence of a cyclic carbonate ester and of an efficient amine catalyst, hydroxyalkyl esters were obtained. The corresponding linear polyesters were synthesized by the advanced polycondensation of the above intermediates at high temperature, under vacuum, and in the presence of some adequate polyesterification catalysts. In the work 1,3-dioxolan-2-one as cyclic carbonate ester, triethylamine as esterification catalyst, and toluene-4-sulfonic acid monohydrate or tetrabutyl titanate as polycondensation catalysts, were preferred for exemplifications. The polyesters were soluble in dimethylacetamide, trichloromethane, tetrahydrofuran, 1,1,2,2-tetrachloroethane, or 1,4-dioxane. The thermal and electric studies showed that the polymers were substances with good thermal stability and high dielectric properties.     

Control of product distribution in the domino metathesis reactions of N-alkynyl 2-azabicyclo[2.2.1]hept-5-en-3-ones. A convenient synthesis of functionalized γ-lactams and indolizidinones

In this report we describe the domino metathesis of N-alkynyl-2-aza-3-oxo-[2.2.1]hept-5-enes. The distribution of products of the domino processes of ROM-CM or ROM-RCM-CM depends on the starting material and on the catalyst used. A sequence of metathesis events has been proposed to account for these results. The procedure can be of use for the synthesis of lactams and indolizidinones.     

A convenient and new approach to the synthesis of ω-heterocyclic amino acids from carboxy lactams through ring-chain-transformation. Part 2: Synthesis of (2R)-/(2S)-2-aminomethyl-3-(1-aryl-/1,5-diaryl-1H-pyrazol-3-yl)-propionic acid

Making use of amide activation, a convenient and short path synthesis of optically pure ω-heterocyclic-β-amino acids has been achieved from (1R,3R)- and (1R,3S)-5-oxo-1-(1-phenyl-ethyl)-pyrrolidine-3-carboxylic acid methyl ester. The key step of the synthesis involves a regiospecific ring-chain-transformation of the enaminones when subjected to 1,2-binucleophilic attacks. The method is illustrated by the synthesis of (2R)-/(2S)-2-aminomethyl-3-(1-aryl-/1,5-diaryl-1H-pyrazol-3-yl)-propionic acid.