A Review on Polymeric-Based Phase Change Material for Thermo-Regulating Fabric Application

Abstract

Phase Changing Materials (PCM) portrays proficiency to liberate perceptible amount of latent heat on the course of phase transformation between liquid-solid or solid-liquid, thereby creating momentary warmth or cooling effect. PCM has been utilized in garments for introducing thermoregulating effect to diminish thermal discomfort of clothing. Assimilation of thermal energy by PCM causes delay in upsurge of microclimate temperature and results in substantial diminution of moisture release from skin thereby leading to inhibition of heat stress conditions and enhancement of thermo-physiological wearing comfort. Simultaneously, the insulating characteristic of such garment can also avert wearer from certain pivotal corollaries like hypothermia or heat syncope, keeping the individual in consolation owing to their automatic acclimatizing attribute in accordance with body and ecological temperature. As the assimilation of PCM into various textile materials have been extensively studied by researchers, an attempt has been made to explicate the recent existing literatures that have successfully integrated and implemented PCM in textile, concentrating on characteristics of PCMs integrated into fibers, and fabrics for potential industrial applications. Finally, various methodologies like coating, spinning & lamination being utilized for applying PCMs onto textiles for developing thermoregulated clothing have been discussed & concludes with challenges & future prospects.     

ASA/SEBS/paraffin composites as phase change material for potential cooling and heating applications in building

Phase change material (PCM) is able to melt and crystalize with a high heat of phase change at constant temperature, which provides new and green cooling and heating strategies for buildings. In this work, PCMs for buildings composed of acrylonitrile‐styrene‐acrylate copolymer (ASA), polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer (SEBS) and paraffin were fabricated by melt blending. The results of the accelerated leakage test indicated an excellent ability of PCMs to keep paraffin from leakage. Thermal properties suggested that the phase change enthalpy of PCMs increased with the increasing content of paraffin and their phase change temperature was close to the comfortable sensible temperature of human body, which made it quite suitable for building cooling and heating. Besides, PCMs presented excellent stability and reusability after several thermal cycling tests. The temperature test conducted with self‐designed cylindrical devices gave a more sufficient and direct demonstration of the cooling and heating effect. Remarkably, excellent cooling and heating performance (both as high as 15°C) of the composites could be obtained with the addition of paraffin. And the time span of the cooling and heating process was as long as 5 and 7.5 hours, respectively. Owing to its excellent cooling and heating capabilities, the ASA/SEBS/paraffin composites are of great potential to be applied in building temperature control.     

Study on thermal properties of organic ester phase-change material embedded with silver nanoparticles

This study investigates the thermal properties of new silver nano-based organic ester (SNOE) phase-change material (PCM) in terms of latent heat capacity, thermal conductivity and heat storage and release capabilities experimentally. Spherical-shaped surface-functionalized crystalline silver nanoparticles (AgNP) prepared were embedded in mass proportions of 0.1 through 5.0 wt% into the pure (base) PCM. Experimental results reveal that dispersion of AgNP into PCM was effective, only physical and no chemical interaction between AgNP and PCM has been exhibited; thereby phase-change temperature of SNOE PCMs were acceptable. These are essential characteristics for SNOE PCMs which signified their thermal and chemical stability on long term. Test results suggest that while compared to pure PCM, degree of supercooling was reduced by 11.7–6.8 % for aforesaid mass proportions of AgNP, whereas latent heat capacities decreased by 7.88 % in freezing and 8.91 % in melting. The interdependencies between thermophysical properties in improving nucleation and growth rate of stable SNOE PCM crystals were signified and discussed. Thermal conductivity of SNOE PCMs were enhanced from 0.284 to 0.765 W m^?1 K^?1 which was expected to be a 10–67 % increase for the above mass loading of AgNP. Furthermore, for SNOE PCMs enhancement span in freezing and melting cycles was improved by 41 and 45.6 %, respectively. Similarly, cooling and melting times were reduced by 30.8 and 11.3 %, respectively. Embedded AgNP helps to achieve improved thermophysical and heat storage characteristics for SNOE PCMs, which in turn can be considered as a potential candidate for cool thermal energy storage applications.     

Emerging Applications of Phase‐Change Materials (PCMs): Teaching an Old Dog New Tricks

The nebulous term phase‐change material (PCM) simply refers to any substance that has a large heat of fusion and a sharp melting point. PCMs have been used for many years in commercial applications, mainly for heat management purposes. However, these fascinating materials have recently been rediscovered and applied to a broad range of technologies, such as smart drug delivery, information storage, barcoding, and detection. With the hope of kindling interest in this incredibly versatile range of materials, this Review presents an array of aspects related to the compositions, preparations, and emerging applications of PCMs.     

Sandwich Fibrous PEG Encapsulations for Thermal Energy Storage

Phase change materials (PCMs) textiles have been developed for personal thermal management (PTM) while limited loading amount of PCMs in textiles reduced thermal buffering effect. In this work, we proposed a sandwich fibrous encapsulation to store polyethylene glycol (PEG) with PEG loading amount of 45 wt %, which consisted of polyester (PET) fabrics with hydrophobic coating as protection layers, polyurethane (PU) nanofibrous membranes as barrier layers and PEG-loaded viscose fabric as a PCM-loaded layer. The leakage was totally avoided by controlling weak interfacial adhesion between protection layer and melting PEG. The sandwich fibrous PEG encapsulations had an overall melting enthalpy value ranging from 50 J/g to 78 J/g and melting points ranging from 20 °C to 63 °C by using different PEGs. Besides, introduction of Fe microparticles in PCM-loaded layer enhanced thermal energy storage efficiency. We believe that the sandwich fibrous PEG encapsulation has a great potential in various fields.     

Characterization of form-stable phase-change material for solar photovoltaic cooling

Solar PV panel cooling is essential to achieve maximum efficiency of PV modules. Phase-change material (PCM) is one of the prominent options to cool the panel and reduce the temperature, since PCMs have low thermal conductivity. Expanded graphite particles are used to enrich the structure and stability as well as to increase the thermal properties. In the present research work, polyethylene glycol (PEG) 1000 is used as a base material and expanded graphite for inclusive particle. A novel form-stable PEG1000/EG composite PCM mixture is prepared, using impregnation and dispersion method. Expanded graphite and PEG1000/EG sample phase compositions are investigated, using X-ray diffraction technique. No new peak is identified in the composite PCM sample. The surface morphology and structure of EG and PEG1000/EG are investigated, using scanning electron microscopy (SEM). Chemical stability analysis is done by Fourier-transform infrared spectroscopy. Thermal properties of the prepared composite PCMs are analysed by differential scanning calorimetry, thermogravimetric analysis (TGA) and KD2 pro analyser. Results show that addition of EG in various propositions (5%, 10% and 15%) enhances the thermal conductivity of PCM samples from 0.3654 to 1.7866 W mK^?1, while melting point and latent heat of fusion of PCM samples are getting reduced. TGA thermographs are used to investigate the thermal stability of the composite PCM samples. TGA curves show that loss of mass happens above the operating temperature, and it is varied with different mass ratios of EG. Characterization of the prepared composite PCM samples is compared and found that PEG1000-85%/EG-15% is the best form-stable PCM, suitable for cooling the solar PV panel as well as to improve the electrical efficiency coupled with a decrease of temperature in the range of 35 °C to 40 °C.

     

Kinetics of the thermal decomposition of processed poly(lactic acid)

The kinetics of the thermal decomposition of processed poly(lactic acid) has been studied and compared to that of raw material. Processing consisted of two different industrial processes: 1) Injection (with or without further annealing); 2) Extrusion followed by injection (with or without further annealing). For this study, an integral method (based on the general analytical solution), differential methods (based on the first conversion derivative and on the 2nd derivative) and special methods have been used. On the other hand, a method based on the maximum decomposition rate has been considered. By doing that, the kinetic parameters (reaction order, frequency factor and activation energy) have been determined. It has been demonstrated that there was only one first-order reaction for the entire conversion range. A new equation (based on the second conversion derivative plot as a function of temperature) was developed allowing the calculation of the reaction order. This method quantifies peak areas (and not peak heights, as reported by Kissinger). It is very useful because it considers both peak shape and width. Activation energy, as determined by using the general analytical solution, was 318 kJ/mol for unprocessed poly(lactic acid) whereas it was 280 ± 5 kJ/mol for processed materials. All the processed materials had approximately the same thermal stability (T₅ = 333.0-335.8 °C, at 95% confidence level), which was slightly lower than that of unprocessed materials (T₅ = 337.5 °C). PLA melting (during extrusion and injection) was responsible for depolymerization reactions (the small molecules formed during melting processes can volatilize readily).     

Thermal performance and flammability of phase change material for medium and elevated temperatures for textile application

Thermal energy storage and insulation have potential applications in many fields such as incorporating phase change material (PCM) in textile materials for insulation in medium and elevated temperatures when the high heat flux 80–84 kW m^?2 results from flashover conditions in a firefighting environment. The feasibility of four selected PCMs is considered in this research. The lack of guidance of hazards of sugar alcohols as a potential PCM is analyzed from molecular structure point of view. The results showed that isomerism of PCMs has a tremendous influence on the flash point of PCMs and hence flammability. Differential scanning calorimeter thermal performance showed that the four candidate PCMs have a remarkable melting temperature and enthalpy of fusion. Different heating rates were observed (1.11, 0.43, and 0.095 %) in the melting temperatures: at 50, 20, and 5 °C·min^?1, respectively. Smaller heating rates are preferable for accurate data. PCMs also undergo degradation due to the high-temperature exposure. Although dulcitol and d-mannitol have the same molecular formula, dulcitol requires higher temperature for degradation than does d-mannitol, and this difference is around 26.08 K. The analysis of results showed that the position of functional group has tremendous influence on the thermal performance. Salt hydrates have a multistep thermal degradation and the lowest loss of mass compared with sugar alcohols. This is because salt hydrates have higher intermolecular forces, which make them undergo high thermal endothermic and exothermic processes.     

Flame-retarded mechanism of SEBS/PPO composites modified with mica and resorcinol bis(diphenyl phosphate)

The flame retardancy of styrene-b-ethylene/butylene-b-styrene triblock polymer (SEBS)/poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) blends was greatly improved by the combined use of mica and resorcinol bis(diphenyl phosphate) (RDP). The limiting oxygen index (LOI), vertical burning and cone calorimeter test were performed to evaluate the flame-retarded effect. The composite of SEBS/PPO/maleic anhydride grafted SEBS (SEBS-g-MAH) with a mass ratio of 11/11/3 passed a V-0 rating in the UL94 test by the addition of 10–15 wt% mica and 15–10 wt% RDP with total amount of 25 wt%. The synergism was confirmed by the mathematical evaluation of the synergistic effect index (SE) in LOI, the residue, the peak heat release rate (PHRR) and the total heat evolved (THE) per mass loss (THE/ML). The flame-retarded mechanism of the composite was also proposed on the results of cone calorimeter test, TGA-FTIR, SEM micrographs and SEM/EDS analysis of the residues. It was found that the degradation rate of SEBS/PPO/SEBS-g-MAH matrix was slowed down, a more consolidated char layer with higher residue was promoted by the combination of RDP and mica. The flame-retardancy of RDP with mica in SEBS/PPO/SEBS-g-MAH matrix was synergistic through gas and condensed phase action.     

Detection of joint capsule changes by differential scanning calorimetry (DSC) in different types of hip disorders to evaluate surgical techniques (a preliminary report)

In this study, paraffin-/ultrasonic-treated diatomite was characterized for use as phase change material (PCM) for thermal energy storage in buildings. The diatomite was treated with ultrasound at various periods of time. The diatomite treated with ultrasound for 60 min (DA-60) was the optimum condition providing the highest surface area without structural degradation. The melting point and latent heat of the paraffin/DA-60 composite PCM were 59 °C and 45.90 J g^?1, respectively. The obtained form-stable PCM had good thermal reliability after 500 cycles of thermal cycling test. The thermal performance of PCM was tested by incorporating the paraffin/DA-60 composite PCM into gypsum board. The results showed that the gypsum board containing the paraffin/DA-60 composite PCM had better thermal energy absorption and release characteristics than those of the control sample. The incorporation of paraffin/DA-60 composite PCM into suitable building materials could thus considerably reduce the energy consumption of cooling system in buildings.     

Fe(II) hydrolysis in aqueous solution: A DFT study

Species arising from Fe(II) hydrolysis in aqueous solution have been investigated using density-functional methods (DFT). The different tautomers and multiplicities of each species have been calculated. The solvation energy has been estimated using the UAHF–PCM method. The hydrolysis free energies have been estimated and compared with the available experimental data. The different hydrolysis species have distinct geometries and electronic structures. The estimated ionization potential of the hydrolyzed species is linearly dependent to the number of hydroxyls present in the complex. The estimated Fe(II)/Fe(III) oxidation potential is in good agreement with previously published results about 0.29 V larger than the experimental value. The results highlight the importance of the chemical speciation in describing electron transfer processes at a molecular level. The PBE/TZVP/UAHF–PCM method has been found to describe correctly the hydrolysis free energies of Fe(II) with an average error about 5 kcal mol⁻¹ from the experimental values.     

Influence of melting conditions on the thermal behaviour of poly(l-lactic acid)

The influence of melting temperature and time on the thermal behaviour of poly(l-lactic acid) (PLLA) was studied with differential scanning calorimetry (DSC). Different melting conditions were investigated at temperature ranging from 200 to 210 °C, and for time from 2 to 20 min. For lower-molecular-weight PLLA, a single exothermic peak could be observed at cooling rate of 2 °C/min, after melted at different conditions. The obtained peak temperature and degrees of crystallinity dramatically increased with an increase of melting temperature or time. During subsequent heating scans, double melting peaks could be observed, which were significantly affected by prior melting conditions. The degradation of this material in the melt and the melt/re-crystallization mechanism might be responsible for the observations above. Apart from double melting, double cold crystallization peaks were observed during heating traces for this material after fast cooling (20 °C/min) from the melt. Prior melting conditions could significantly influence the cold crystallization behaviour. The competition between the crystallization from the nuclei remained after cooling, and that from spontaneous nucleation might be responsible for the appearance of double peaks. Additionally, the influence of melting conditions on the thermal behaviour of PLLA was dependent on the initial molecular weight.     

Thermal energy storage behavior of composite using hybrid nanomaterials as PCM for solar heating systems

In this study, thermal and heat transfer characteristics of the newly prepared composite as phase change material (PCM) comprising paraffin and hybrid nanomaterials (50 % CuO–50 % TiO₂) have been investigated for solar heating systems. Composite PCMs with 0.25, 0.5, 0.75, and 1.0 mass% of hybrid nanomaterials were prepared individually for assessing their better performances than paraffin alone. Sodium dodecylbenzene sulfonate (SDBS) was preferred as the surfactant to ensure the dispersion stability of the nanomaterials in the paraffin and mass fraction of SDBS was 1.2 times of the mass fraction of hybrid nanomaterials in the paraffin. The thermal properties of the composite PCMs were determined by differential scanning calorimetry in terms of mass fractions of hybrid nanomaterials and number of thermal cycles. The thermal stabilities of the paraffin and composite PCMs were tested by thermogravimetric analyzer. The thermal conductivity and viscosity of the paraffin due to the addition of various mass fractions of CuO, TiO₂, and hybrid nanomaterials were determined by LFA 447 NanoFlash analyzer and Brookfield DV-III Ultra programmable rheometer, respectively. The experimental results proved that the heating and cooling rates of composite PCMs were faster due to the dispersion of hybrid nanomaterials. For composite PCM with 1.0 mass% of hybrid nanomaterials, the melting and freezing times were reduced by 29.8 and 27.7 %, respectively, as compared with the paraffin.     

聚乙二醇/二醋酸纤维素相变材料的组成与储能性能间的关系

以刚性的二醋酸纤维素 (CDA)链为骨架 ,接枝上聚乙二醇 (PEG)柔性链段 ,可得到一种具有固固相变性能的网状储能材料 .利用该材料的PEG支链从结晶态到无定形态间的相转变 ,可以实现储能和释能的目的 .具体研究了PEG的百分含量及PEG的分子量对材料储能性能的影响 .研究结果表明 ,通过改变PEG的百分含量与PEG的分子量 ,可以得到不同相变焓和不同相变温度的材料     

Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties

This paper deals with the thermal performances of shape-stabilized phase change materials (SSPCM) for energy saving in various fields. This study enhanced thermal properties of SSPCM using exfoliated graphite nanoplatelets (xGnP). SSPCM, which contains the xGnP, was prepared by mixing and melting techniques for high dispersibility, thermal conductivity, and latent heat storage. In the experiment, we used hexadecane, octadecane, and paraffin as phase change materials (PCMs), and they have 254.7, 247.6, and 144.6 J g^?1 of latent heat capacity, and melting points of 20.84, 30.4, and 57.09 °C, respectively. The characteristics of SSPCMs were determined using SEM, DSC, FTIR, TG, TCi, and Energy simulation. SEM morphology showed homogenous dispersion of PCM and xGnP in the porous diatomite. DSC analysis results showed the latent heat capacity of SSPCM and SSPCM/xGnP composites, and TG analysis results showed the thermal reliability of the samples. Also, we checked the thermal conductivity of the SSPCM that contains xGnP, by TCi analysis.     

Crystallization kinetics of virgin and processed poly(lactic acid)

Poly(lactic acid) (PLA) is an emerging material mainly because it can be synthesized from renewable resources and is thus environmentally and ecologically safe. The mechanical properties, above all the thermal resistance of PLA are determined by the crystalline content: the heat deflection temperature of crystalline PLA can reach 100 °C, whereas amorphous PLA loses mechanical properties at temperatures slightly higher than 60 °C. However, PLA has a low crystallization rate, so that after processing it remains mostly amorphous. This characteristic heavily limits the use of PLA for commercial applications. Many studies have been recently published on the crystallization kinetics of PLA. The effect of processing on this feature is however often neglected. In this work, the significance of processing on the crystallization kinetics of a commercial PLA was investigated. Two processing methods were explored: extrusion and injection moulding. The obtained materials, and the starting pellets of virgin polymer, were analyzed by calorimetry in order to obtain the crystallization kinetics. Two protocols were adopted to determine the crystallization rates during cooling from the melt or heating from the solid. The parameters of a kinetic equation were determined for all the materials and protocols adopted and it was thus possible to describe the evolution of crystallinity during heating and during cooling.     

Synthesis and properties of bisphenol A–terphenol poly(arylene ether sulfone)–polydimethylsiloxane segmented block copolymers

We have synthesized new poly(arylene ether sulfone) (PAES) and polydimethylsiloxane (PDMS) segmented block copolymers where the PAES segments contain 20–30% of 4,4′-dihydroxyterphenol (DHTP) and 70–80% of bisphenol A (BA) units. The tensile and thermal properties of these new polymeric materials were measured and were compared to those of existing bisphenol A PAES–PDMS segmented block copolymers (BA PAES-b-PDMS). Also, a high molecular weight BA–DHTP PAES random copolymer containing 80% BA and 20% DHTP was prepared and its properties were compared to Udel®, a commercial PAES based on BA. The BA–DHTP PAES random copolymer had a significantly higher modulus, 1800 MPa and a higher T_g, 196 °C when compared to Udel®. In the segmented block copolymer materials, increased modulus and tensile strain at break (elongation) were also found when DHTP was incorporated into the PAES segments.     

Latent heat nano composite building materials

Heat storage for heating and cooling of buildings reduces the conventional energy consumption with a direct impact on CO₂ emissions. The goal of this study was to find the physico-chemical fundamentals for tailoring phase change material (PCM)-epoxy composites as building materials depending on phase change temperature and latent heat using the optimal geometry for each application. Thus, some nano-composite materials were prepared by mixing a PCM with large latent heats with epoxy resin and Al powder. Some polyethylene glycols of different molecular weights (1000, 1500, and 2000) were used as PCMs. Subsequently these PCM-epoxy composites were thermo-physically characterized by DSC measurements and found to be suitable for building applications due to their large latent heat, appropriate phase change temperature and good performance stability. Moreover these cross-linked three dimensional structures are able to reduce the space and costs for encapsulation.     

Thermal analysis study of LiFeO<Subscript>2</Subscript> formation from Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mechanically activated reagents

Series of n-octadecane/expanded graphite composite phase-change materials (PCMs) with different mass ratio were prepared using n-octadecane as PCMs, expanded graphite as multi-porous supporting matrix through vacuum impregnation method. Microstructure, crystallization properties, energy storage behavior, thermal cycling property and intelligent temperature-control performance of the composite PCMs were investigated. Results show that the composite PCMs have a good energy storage property. The melting enthalpy and crystallization enthalpy can reach 164.85 and 176.51 J g^?1, respectively. Furthermore, the good thermal conductivity of expanded graphite reduces the super-cooling degree of n-octadecane and endows the composite PCMs with fast thermal response rate and excellent thermal cycling stability. As a result, the phase-change temperatures and phase-change enthalpy almost have no change after 50 thermal-cooling cycles. The test of intelligent temperature-control performance shows that the electronic radiator filled with the composite PCMs possesses a high intelligent temperature-control performance, and its temperature can sustain in the range of 22–27.5 °C for about 6120 s. These results indicate that the prepared composite PCMs possess good comprehensive property and can be widely used in energy storage and thermal management systems.     

Simultaneous determination of UV filters and polycyclic musks in aqueous samples by solid-phase microextraction and gas chromatography–mass spectrometry

A simple, precise and accurate method for the simultaneous determination of four UV filters and five polycyclic musks (PCMs) in aqueous samples was developed by solid-phase microextraction coupled with gas chromatography–mass spectrometry (SPME-GC–MS). The operating conditions affecting the performance of SPME-GC–MS, including fiber thickness, desorption time, pH, salinity, extraction time and temperature have been carefully studied. Under optimum conditions (30 μm PDMS fiber, 7 min desorption time, pH 7, 10% NaCl, 90 min extraction time at 24 °C), the correlation coefficients (r²) of the calibration curves of target compounds ranged from 0.9993 to 0.9999. The limit of detection (LOD) and limit of quantification (LOQ) ranged from 0.2 to 9.6 ng L⁻¹ and 0.7 to 32.0 ng L⁻¹, respectively. The developed procedure was applied to the determinations of four UV filters and five PCMs in river water samples and internal standard was used for calibration to compensate the matrix effect. Good relative recoveries were obtained for spiked river water at low, medium and high levels. The proposed SPME method was compared with traditional SPE procedure and the results found in river water using both methods were in the same order of magnitude and both are quite agreeable.