Electrospinning of the hydrophilic poly (2-hydroxyethyl methacrylate) and its copolymers with 2-ethoxyethyl methacrylate

The goal was to electrospin 2-hydroxyethyl methacrylate — based biocompatible polymers and prepare submicron fibres (nanofibers) for biomedicinal applications. Syntheses of poly(2-hydroxyethyl methacrylate) (HEMA) and its copolymer with 2-ethoxyethyl methacrylate (EOEMA), and their characterization by viscometry and molecular weight are described. Their relation to electrospinning is discussed. Electrospinning of HEMA homopolymer from water-ethanol is successful for molecular weights 6.31 × 10⁵ and 1.80 × 10⁶ g/mol. Electrospinning of HEMA/EOEMA copolymers is feasible from ethanol.      

Magnetic poly(glycidyl methacrylate)-based microspheres prepared by suspension polymerization in the presence of modified La0.75Sr0.25MnO3 nanoparticles

With the aim of preparing new magnetic poly(glycidyl methacrylate) (PGMA) microspheres suitable for magnetic separation, La_0.75Sr_0.25MnO₃ nanoparticles were selected as a core material. In order to improve their compatibility with PGMA, the surface of the nanoparticles was treated with penta(methylethylene glycol) phosphate methacrylate (PMGPMA) as a stabilizer. Subsequently, the nanoparticles were encapsulated by the suspension polymerization of glycidyl methacrylate (GMA) resulting in a relatively homogeneous distribution of La_0.75Sr_0.25MnO₃ nanoparticle aggregates inside the polymer microspheres. Microspheres in the size range of a hundred micrometers with a broad particle size distribution were obtained. PMGPMA can be considered to be an efficient compatibilizer between La_0.75Sr_0.25MnO₃ nanoparticles and PGMA. Both PMGPMA-coated La_0.75Sr_0.25MnO₃ nanoparticles and magnetic PGMA microspheres were characterized in terms of morphology, particle size, composition and magnetic properties by the appropriate methods, such as X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), transmission electron microscopy (TEM), light microscopy and SQUID magnetometry.     

A novel route to poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers

The vinyl of the ester group of 2-vinyloxyethyl methacrylate was first selectively reacted with acetic acid to obtain 2-[1-(acetoxy)ethoxy]ethyl methacrylate ( 2 ). This protected monomer was subjected to anionic polymerization in tetrahydrofuran at −60°C in the presence of LiCl, using 1,1-diphenylhexyllithium as initiator. The molecular weight of the polymer could thus be controlled and a narrow molecular weight distribution obtained. The protecting group, 1-(acetoxy)ethyl, could be easily eliminated (by quenching the polymerization reaction with methanol and water) to generate poly(2-hydroxyethyl methacrylate) (poly(HEMA)). Block copolymers were also prepared by the sequential anionic polymerization of MMA and 2 or styrene and 2 . They possess narrow molecular weight distributions, and controlled molecular weights and compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1865–1872, 1998     

Magnetic hydrophilic methacrylate-based polymer microspheres for genomic DNA isolation

Carboxyl groups containing magnetic and non-magnetic microspheres were used in solid-phase reversible immobilization (SPRI) of genomic DNA. Magnetic non-porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)--P(HEMA-co-EDMA), poly(glycidyl methacrylate)--PGMA and P(HEMA-co-GMA) microspheres with hydrophilic properties were prepared by dispersion copolymerization of the respective monomers in the presence of colloidal iron oxides. DNA from chicken erythrocytes and DNA isolated from bacterial cells of Bifidobacterium longum was used for testing of adsorption/desorption properties of magnetic microspheres. The occurrence of false negative results in polymerase chain reaction (PCR) caused by the presence of extracellular inhibitors in DNA samples has been solved using SPRI. The P(HEMA-co-EDMA) and P(HEMA-co-GMA) microspheres were used for isolation of DNA from different dairy products followed by PCR identification of Bifidobacterium strains.     

On the preparation of stable poly(2-hydroxyethyl methacrylate) nanoparticles

A comprehensive experimental study of aqueous heterophase homopolymerization of 2-hydroxyetyl methacrylate revealed special conditions that must be fulfilled in order to obtain stable latex particles in the nanometer size range. The results clearly show that the formation and the stability of this kind of hydrophilic latex particle strongly depends on the hydrophobic-hydrophilic properties of both the initiating radicals and the stabilizers. Hydrophobic initiators in combination with sodium alkyl sulfate surfactants of proper chain lengths or ionic surface-active initiators lead to stable latex particles. In the latter case the particles keep their identity and spherical shape even after drying of the aqueous dispersion.     

Covalent immobilization of invertase on chemically activated poly(2-hydroxyethyl methacrylate) microbeads

Properties of invertase immobilized on poly(2-hydroxyethyl methacrylate) microbeads activated by epichlorohydrin or cyanuric chloride were studied. After 20 repeated uses for 3 days, the activity of the immobilized enzyme was 92–93%. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1793–1797, October, 2006.     

Preparation of micron-size monodisperse poly(2-hydroxyethyl methacrylate) particles by dispersion polymerization

Dispersion polymerization of 2-hydroxyethyl methacrylate using four categories of polymeric stabilizers in a mixture of good and poor solvents was performed to produce polymeric particles. The stabilizers employed were methyl methacrylate and styrene homopolymers, methacryloyl-terminated poly(methyl methacrylate) and polystyrene macromonomers, an amphiphilic poly(methyl methacrylate-co-methacrylic acid-graft-styrene), and polybutadiene derivatives containing reactive vinyl groups. Dispersion copolymerization with a small amount of the macromonomer gave micron-size particles with relatively narrow size distribution. The amphiphilic graft copolymer and the polybutadiene derivatives also afforded monodisperse particles. The mixed ratio between good and poor solvents greatly affected the particle size and size distribution. © 1996 John Wiley & Sons, Inc.     

Fourier transform infrared study of poly (2-hydroxyethyl methacrylate) PHEMA

 Fourier transform infrared spectra in the wave number range 450–4500 cm^-1 of poly (2-hydroxy-ethyl methacrylate) PHEMA have been studied as functions of water content in the range 38–2.6 wt% and of temperature in the range 300–373 K. The results show changes in the intensities of the stretching frequencies of the carbonyl band, H–O–H bending vibration and O–H stretching vibration with a change in water content and temperature. The results confirm two types of water in the hydrogel polymer system, tightly bound water and loosely bound water. At low concentrations, water is mainly hydrogen-bonded to the polymer and is described as tightly bound water. However, at water concentrations greater than 18% by weight, part of the water exists in a different form and behaves as loosely bound water. For concentrations over 30%, there is some evidence that excess water behaves more loosely bound somewhat like bulk water. Infrared spectroscopic results supplement those obtained by means of NMR by Smyth et al. and by dielectric spectroscopy. Our results also show that some of the water continues to be hydrogen bonded to the polymer until at least a temperature of 373 K when the bulk water should have evaporated. FTIR is found to yield greater site-specific insight into the local behaviour of water in hydrated PHEMA. Received: 22 August 1996 Accepted: 11 November 1996     

Spectral and chemical determination of copolymer composition of poly (butyl acrylate-co-glycidyl methacrylate) from emulsion polymerization

Batch emulsion polymerization was used for preparing poly(butyl acrylate-co-glycidyl methacrylate) with different copolymer compositions at 75 °C with potassium persulfate as an initiator. Solubility and gel content of the prepared copolymers were studied. Four different spectral (¹H-NMR and FTIR) and chemical (elemental analysis and titration) methods were used to determine the copolymer composition. The epoxy was used as a key functional group, particularly in FTIR and titration methods of quantification. Results obtained from the chemical methods showed good agreement with those of the spectral methods. Effects of some probable phenomena occurring during copolymerization were investigated to account for differences of data obtained from the different analytical methods. Finally, the methods were compared and ¹H-NMR and elemental analysis were recognized as preferred approaches for the copolymer composition determination.     

Hydrogen-bond structures in poly(2-hydroxyethyl methacrylate): Infrared spectroscopy and quantum chemical calculations with model compounds

Hydrogen-bond structures in poly(2-hydroxyethyl methacrylate) (PHEMA) were investigated by infrared (IR) spectroscopy and quantum chemical calculations (QCC). A monomer of 2-hydroxyethyl methacrylate (HEMA) and model compounds of methyl acetate (MA) and methanol (MeOH) were also used. Evidences for OHOC and OHOH types of hydrogen-bonds were observed in an IR spectrum of a PHEMA solid. It was estimated from the present study that 47.3% of OH groups on the PHEMA side chain terminal are engaged in the OHOC type of hydrogen-bond, while the rest contributes to the OHOH type of hydrogen-bond.     

Graft polymerization of 2-hydroxyethyl methacrylate via ATRP with poly(acrylonitrile-co-p-chloromethyl styrene) as a macroinitiator

Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacrylonitrile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuCl/2,2’-bipyridine at 50 °C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitiator is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these amphiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.     

Iminodiacetic acid-modified magnetic poly(2-hydroxyethyl methacrylate)-based microspheres for phosphopeptide enrichment

Magnetic non-porous hydrophilic poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) microspheres prepared by the dispersion polymerization and modified with iminodiacetic acid (IDA) were employed for the IMAC separation of phosphopeptides. Fe³⁺ and Ga³⁺ ions immobilized on IDA-modified magnetic microspheres were used for the enrichment of phosphopeptides from the proteolytic digests of two model proteins differing in their physico-chemical properties and phosphate group content: porcine pepsin A and bovine α-casein. The optimum conditions for phosphopeptide adsorption and desorption in both cases were investigated and compared. The phosphopeptides separated from the proteolytic digests were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The ability of the prepared Fe³⁺- and Ga³⁺-IDA-modified magnetic microspheres to capture phosphopeptides from complex mixtures was shown on an example of bovine milk proteolytic digest.     

含氨基聚甲基丙烯酸羟乙酯树脂对胆红素的吸附性能研究

以交联聚甲基丙烯酸羟乙酯树脂为载体,以己二胺和多乙烯多胺为功能基制备了一系列胆红素吸附剂,研究了它们在不同吸附温度、离子强度和胆红素浓度等条件下,对胆红素的吸附性能的影响.研究表明,该类吸附剂对胆红素具有良好的吸附性能,其中以己二胺和质子化己二胺为功能基的吸附剂对胆红素的吸附作用最佳.     

Surface modification of thermally expandable microspheres by grafting poly(glycidyl methacrylate) using ARGET ATRP

This study demonstrates the surface modification of thermally expandable core/shell microspheres by grafting glycidyl methacrylate (GMA) using activators regenerated by electron transfer (ARGET) ATRP. To retain the expansion properties it was essential to minimize the shear forces, use solvents compatible with the microspheres and keep the reaction times short (three hours or less). Using microspheres with hydroxyl groups on the surface, it was found that after converting these to α-bromo esters, GMA could be grafted by ARGET ATRP using only 50 ppm of copper catalyst in toluene at 30 °C. Decent control of the polymerization was achieved with PMDETA as ligand reaching PDIs of 1.4 for the solution polymerization of GMA. When microspheres were present, the polymerization was less controlled with higher PDIs. The epoxide groups of the grafted microspheres were hydrolyzed by HCl in THF providing a hydrophilic surface of the microsphere. The expansion property of the microspheres was studied after each reaction step by thermal mechanical analysis, and it was found that the expansion capacity was well preserved with only limited negative effect on the microspheres.     

Redox polymerization of 2-hydroxyethyl methacrylate (HEMA). I. Influence of surfactants on polymerization kinetics

Oxidation of ferrous orthophenanthroline (FeP) by peroxydiphosphate (PP) in aqueous medium at pH 1 was followed spectrophotometrically. Kinetic analysis has shown that oxidation occurs via the formation of an intermediate complex between FeP and PP. Equi-librium and rate constants were calculated. Influence of surfactants on the oxidation of FeP by PP was also Investigated. The equilibrium constant for complex formation was found to be higher in the presence of surfactants. The enhanced complex formation has been attributed to the ionic interactions between the charged surfactant and the ionic species in the reaction medium. Polymerization of HEMA initiated by the redox system,FeP/PP, was carried out in aqueous medium, under the conditions of excess reductant over oxidant and excess oxidant over reductant. The polymerization followed different mech-anisms under these conditions; with excess oxidant, the growing polymer radicals underwent oxidative termination, while with excess reductant, primary radical termination was pre-ferred. The effect of surfactants on the aqueous polymerization of HEMA using the redox system FeP/PP was also investigated. In addition to the decrease in rate, the polymerization followed a different mechanism in the presence of surfactants, the growing radicals ter-minated by mutual interaction. © 1995 John Wiley & Sons, Inc.     

Bacterial adhesion-resistant poly(2-hydroxyethyl methacrylate) derivative for mammalian cell cultures

In an attempting to find new biomaterials for mammalian cell culture, PHEMA derivatives with ester side groups are synthesized by one-step polymer-analogous reaction. These polymers show excellent antifouling properties against S. epidermidis and P. aeruginosa while their cytotoxicity and proliferation activity for HDF cell are on a similar level as commercially available TCPS. The interesting bioadhesion property is systematically correlated with surface properties of the PHEMA derivatives.     

A mixed film composed of oligonucleotides and poly(2-hydroxyethyl methacrylate) brushes to enhance selectivity for detection of single nucleotide polymorphisms

Preliminary studies of mixed films composed of oligonucleotides and poly(2-hydroxyethyl methacrylate) (PHEMA) have recently been shown to enhance the selectivity for detection of 3 base-pair mismatched (3 bpm) oligonucleotide targets. Evaluation of selectivity for detection of single nucleotide polymorphisms (SNP) using such mixed films has now been completed. The selectivity was quantitatively determined by considering the sharpness of melt curves and melting temperature differences (ΔT_m) for fully complementary targets and SNPs. Stringency conditions were investigated, and it was determined that the selectivity was maximized when a moderate ionic strength was used (0.1-0.6 M). Increases of ΔT_m when using mixed films were up to 3-fold larger compared to surfaces containing only immobilized oligonucleotide probes. Concurrently, increases in sharpness of melt curves for 1 bpm targets were observed to be up to 2-fold greater for mixed films. The co-immobilization of PHEMA resulted in a more homogeneous distribution of oligonucleotide probes on surfaces. Lifetime measurements of fluorescence emission from immobilized oligonucleotide probes labeled with Cy3 dye indicated the difference in microenvironment of immobilized oligonucleotides in the presence of PHEMA.     

Preparation and surface modification of magnetic poly(methyl methacrylate) microspheres

~~Preparation and surface modification of magnetic poly(methyl methacrylate) microspheres~~     

Immobilization of glucoamylase onto novel porous polymer supports of vinylene carbonate and 2-hydroxyethyl methacrylate

Glucoamylase was immobilized onto novel porous polymer supports. The properties of immobilized glucoamylase and the relationship between the activity of immobilized enzyme and the properties of porous polymer supports were investigated. Compared with the native enzyme, the temperature profile of immobilized glucoamylase was widened, and the optimum pH was also changed. The optimum substrate concentration of immobilized glucoamylase was higher than that of native enzyme. After storage for 23 d, the immobilized glucoamylase still maintained about 84% of its initial activity, whereas the native enzyme only maintained about 58% of the initial activity. Moreover, after using repeatedly seven times, the immobilized enzyme maintained about 85% of its initial activity. Furthermore, the properties of porous polymer supports had an effect on the activity of the immobilized glucoamylase.     

Swelling behaviour of crosslinked hydrogels based on (2-hydroxyethyl methacrylate) with a zwitterionic comonomer (1-3-sulfopropyl-2-vinyl-pyridinium-betaine)

Copolymeric hydrogels were prepared by the chemically initiated free radical copolymerization in aqueous solution of mixtures of [1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (SPV) and (2-hydroxyethyl methacrylate) (HEMA) in the presence of a crosslinking agent N,N′-methylene-bis-acrylamide (MBA). The hydrogels were swollen to equilibrium in water and aqueous KSCN at 298 K and their swelling behaviour has been investigated using gravimetric measurements. The effects of the concentration of KSCN and the mole fraction of SPV in the feed (F_s) have been noted and discussed. The main findings are:(a) In water, the water content (W₁) of copolymeric hydrogels is insensitive to SPV content at F_s ? 0.45. In contrast, W₁ decreases sharply with decreasing F_s within the range of 0 < F_s < 0.45. (b) In aq. KSCN, the degree of total swelling (W) exceeds the value in pure water, the enhancement in swelling being most marked at low values of [KSCN]. The content of water within the hydrogel increases with KSCN concentration in the swelling medium for low values of [KSCN], but thereafter falls with further increase in salt concentration. In contrast, the salt content within the swollen hydrogel displays a continuous increase with increasing [KSCN]. All these results of item (b) are for copolymeric hydrogels within the full range of F_s (0 < F_s < 1). (c) at a fixed aq. KSCN concentration, both W and W₁ increase sharply with increasing F_s over the entire range of copolymer composition.