Poly(10-undecene-1-ol) characterized by MALDI-TOF MS and NMR spectroscopy

Poly(10-undecene-1-ol)s were synthesized by metallocene-catalyzed polymerization. MALDI-TOF MS allows obtaining detailed information on the monomer units in the polymer chains and the nature of the head and end groups of these polymers in dependence on the Al alkyl triisobutyl aluminum (TIBA) as well as methylalumoxan (MAO), both used as protecting agent for the hydroxyl groups of the monomer. The peak-to-peak distances of the main peaks could be distinctly assigned to the monomer unit 10-undecene-1-ol. Evaluating the MALDI-TOF peak distributions, polymers with -H, -C₄H₉, -CH₃ head groups in combination with vinylidene and saturated (–CH₃) end groups could be detected. By ¹H NMR spectroscopy, it was verified that with the used catalysts polymers with vinylidene end groups were obtained predominantly. The presence of saturated end groups could be proved qualitatively by combination of ¹H and ¹³C NMR spectroscopy for polymers produced by TIBA protection, which strikingly confirm the results from MALDI-TOF MS. For the polymers prepared with only MAO protection, saturated groups are also proved but discrimination between head and end groups was not possible. A polymerization mechanism corresponding to the detected different head and end groups is proposed.     

Synthesis of poly(10-undecene-1-ol) by metallocene-catalyzed polymerization

Poly(10-undecene-1-ol)s as precursors for potential polar macromonomers were synthesized by metallocene-catalyzed polymerization. For the use as macromonomers, polymerizable terminal double bonds are an important requirement and thus, the investigation of the end groups in the polymers was the main focus of this study. The influence of the catalyst and polymerization conditions on the chain length of the polymer backbone, the monomer conversion as well as the end group characteristics were analyzed. It was possible to find conditions for preparing poly(10-undecene-1-ol)s with terminal double bonds using the catalyst system Cp₂ZrCl₂/MAO. Two other chosen catalysts produced mainly internal double bonds. The poly(10-undecene-1-ol)s could be prepared as atactic or isotactic-rich materials depending on the catalyst used.     

Effect of crystalline structure on the hardness and interfacial adherence of flame sprayed poly(ether-ether-ketone) coatings

Flame sprayed PEEK (poly-ether-ether-ketone) coatings, with an amorphous structure, were subjected to isothermal treatments with annealing temperatures from 180 to 300 °C and holding times from 1 to 30 min. The coating structures were studied by means of differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses. All the annealed coatings exhibited semi-crystalline structures. Coexistence of thick and thin lamellae in the spherulites of annealed coatings can be deduced. The Knoop hardness and the interfacial adhesion of the coatings were examined. The annealed coatings exhibit higher hardness than the amorphous one. The formation of the thick lamellae is a determining factor for improving the coating hardness, which could restrict the motions and slippages of the polymer chains. However, the annealed coatings exhibit a weak adherence to the substrate. Some fissures or spherical porosities could be observed, in certain zones, on the coating/substrate interface. The formation of these fissures and porosities could be ascribed to the coating residual stress and the large volume contraction during the crystallization that occurred under the annealing conditions.     

Influence of aspect ratio of carbon nanotubes on crystalline phases and dielectric properties of poly(vinylidene fluoride)

Poly(vinylidene fluoride) (PVDF)-multiwalled carbon nanotube (MWNT) composites with different aspect ratios of MWNT were prepared by a coagulation method. Field emission scanning electron and transmission electron microscopic studies reveal that MWNT are well dispersed in the PVDF matrix. The X-ray diffraction and differential scanning calorimeter data indicate that the composites with high aspect ratio of MWNT have the β phase structure at the MWNT loading level of 2.0wt%, and have a mixture of α and β phase below 2wt% MWNT, and that those composites with low aspect ratio of MWNT, however, always have a mixture of α and β phase for MWNT concentrations ?2.0wt%. The dielectric constant values increase with the increase in MWNT loading level and the percent increase in dielectric constant is much greater in the composite filled with high aspect ratio of MWNT than in that loaded with low aspect ratio. And also, it has been found that the dielectric loss of the composites with MWNT loading level ?2.0wt% is still as low as neat PVDF, which is of significance for dielectric application.     

Crystal Structure of (1R,4R;1S,4S)2-Amino-3-Cyano-1,4-Diphenyl-2-Cyclopentene-1-ol

1INTRODUCTIONIntheearly1970'sthreegroupsofinvestigatorsL,~,'foundthatlow-valenttita-nium,preparedbythereactionofstrongreducingagentswithtitaniumtrichlorideortitaniumtetrachlorideintetrahydrofuran,canabstractoxygenfromketonesoraldehydes,leadingtotheforma-tionofolefins.Theinterestinthereactioninducedbylow--valenttitaniumreagentsisincreasingandalargenumberoffunctionalgroupscanbereduceds4-6).Recent-ly,wefoundthatthetitlecompoundisObtainedbycy-cllzatlonreactionof(3--oxo-1,3-diphenyl)propyl-pro…     

Crystal Structure of Trans-2-Amino-3-Cyano-4-(3',4'-Methylenedioxyphenyl)-1-Phenyl-2-Cyclopentene-r-1-ol

1INTRODUCTIONIntheearlyseventiesthreegroupsofinvestigators('--"establishedthatlow--va-lenttitanium,preparedbythereactionofstrongreducingagentsontitaniumtrichlo-rideortitaniumtetrachlorideintetrahydrofuran,canabstractoxygenfromketonesoraldehydes,leadingtotheformationofolefins.Anincreasinginterestinthereac-tioninducedbylow--valenttitaniumreagentsisobservedandalargenumberoffunc-tionalgroupscanbereducedt4--6).However,thereactionoflow-valenttitaniumreagentwith4,4--dicyano--1,3--diaryl--l-butano…     

Linear trimerization of 1-ethynylcyclohexan-1-ol catalysed by nickel(II) complexes

The catalytic reaction of 1-ethynylcyclohexan-1-ol (EC) in the presence of bisphosphine nickel(II) complexes yields a linear trimer. The trimer could be isolated and characterized by means of MS, IR and NMR spectroscopies. The reaction mechanism is also discussed.     

Simultaneous Improvements of Thermal Stability and Mechanical Properties of Poly（propylene carbonate） via Incorporation of Environmental-friendly Polydopamine

Inspired by the photoprotection, radical scavenging of melanin together with versatile adhesive ability of mussel proteins, polydopamine（PDA） nanoparticles were successfully prepared and incorporated into environmentally friendly polymer, poly（propylene carbonate）（PPC） via solvent blending. The prepared composites exhibited excellent thermal stability in air and nitrogen atmosphere and extraordinary mechanical properties. The composites displayed eminent increase of temperature at 5% weight loss（T5%） by 30-100 K with 0.3 wt%-2.0 wt% loadings, meanwhile, the tensile strength and Young＇s modulus were significantly improved from 11.5 MPa and 553.7 MPa to 40.5 MPa and 2411.2 MPa, respectively. The kinetic calculation indicated that improvement of T5% is presumably derived from suppressing chain-end unzipping. The glass transition temperature（Tg） of the PPC/PDA composites increased by 8-10 K. This is probably due to hydrogen bonding interaction since the abundant proton donors along PDA chains would interact with proton acceptors like C = O and C―O―C in PPC which would cause restriction of segmental motion of PPC chains.     

Excess Molar Enthalpies and Excess Molar Volumes of (Water+Octan-1-ol or +Octan-2-ol) at 298.15 K

The excess molar enthalpies and volumes have been determined for the binary system (water+octan-1-ol or +octan-2-ol) by means of direct calorimetric and densimetric measurements in the miscibility range. The experimental data were described through a Redlich-Kister type equation. For excess enthalpies a sigmoidal shape is predicted,while excess volumes are negative except for a little positive queue observed for(water+octan-1-ol) system at very low water content. Also the partial molar enthalpies of solution and the partial molar volumes of water in the two isomeric octanols at infinite dilution have been evaluated and discussed. A comparison is made between excess enthalpies and excess free energies calculated by the UNIFAC method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal and mechanical properties of cationic guar gum/poly(acrylic acid) hydrogel membranes

Novel hydrogel membranes (coded as GA) based on cationic guar gum (CGG) and poly(acrylic acid) (PAA) were synthesized with various feed compositions. Their structure and properties were studied by Fourier transform infrared spectra, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analyses and tensile tests. The structure analyses indicated that there existed strong electrostatic interaction between CGG and PAA, which resulted in uniform structure and complete miscibility between the two components. On the basis of thermogravimetric analyses, the activation energies (E_a) of the first degradation of the membranes increased from 34.5 to 77.1 kJ/mol with an increase of CGG content, while the residual ratios of the membranes increased from 7.6 to 36.1 wt% at 600 °C. This indicated an elevated thermal stability of PAA-based materials through an introduction of CGG. The tensile tests exhibited the mechanical properties of the membranes were improved with an increase of CGG content, and the maximum value of 41.1 MPa was reached.     

钴(Ⅱ)和铜(Ⅱ)膦酸配位聚合物的热、磁性能

3-氨基-1-羟基丙叉-1,1-二膦酸与钴或铜离子的水热反应得到新的配聚物Co2(NH3CH2CH2C(OH)(PO3)(PO3H))2·2H2O (1) 和Cu3{[NH3CH2CH2C(OH)(PO3)2](H2O)2} (2).研究了两个配合物的热稳定性,采用变温磁化率研究了在5-300 K范围内的磁性能. 结果表明:在配合物1中,钴离子间存在着弱的反铁磁偶合作用,理论拟合值为J=-2.1 cm-1,g=2.18;配合物2中,铜离子间的磁作用较复杂.     

Synthesis and liquid crystalline properties of poly(1‐alkyne)s carrying triphenylene discogens

Triphenylene‐containing 1‐decynes with different alkyl chain lengths and their polymers are synthesized and the effects of the structural variables on their mesomorphic properties are investigated. The monomers [HC?C(CH₂)₈CO₂C₁₈H₆ (OC_mH_2m+1)₅; m = 4–9] are prepared by consecutive etherization, coupling, and esterification reactions. The monomers form columnar phases at room temperature. The polymerizations of the monomers are effected by [Rh(nbd)Cl]₂, producing soluble polymers in high yields (up to 84%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, TGA, DSC, POM, and XRD analyses. All the polymers are thermally stable, losing little of their weights when heated to 300 °C. The isotropization temperature of the polymers increases initially with the length of alkyl chain but decreases on further extension. Although the polymers with shorter and longer alkyl chain lengths adopt a homogeneous hexagonal columnar structure, those with intermediate ones form mesophases with mixed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2960–2974, 2008     

Synthesis, characterization and photolysis studies on liquid crystalline poly[4-(4′-x-biphenyl)yl-4″-(m-methacryloyloxyalkyloxy) cinnamate]’s

Three series of side chain liquid crystalline polymers containing terminally substituted biphenyl cinnamoyl esters were synthesized and characterized. The para position in the cinnamoyl group was connected with polymer backbone through various even numbers of methylene spacers. The terminal electron acceptor and donor substituted biphenyl groups were linked to cinnamoyl group through ester linkages. Polarizing microscopic and DSC studies confirm the formation of thermotropic mesophase up on heating. All the polymers exhibited nematic/grainy mesophases. The TGA and DSC studies showed that the nature of the terminal substituents have significant effect on mesophase temperatures as well as in thermal stability of these liquid crystalline polymers. UV light promoted photocrosslinking studies reveal that the clear involvement on photocrosslinking efficiency, although they are linked to the olefinic bond of cinnamoyl group through their ester linkage. It is observed that electron-donating group accelerate the photocrosslinking rate, while acceptor group retard the phase of the reaction on the other hand, the unsubstituted polymers show an intermediate rate.     

Morphology,crystalline structure,and properties of poly(vinylidene fluoride)/silica hybrid composites

Poly(vinylidene fluoride)/silica (PVDF/SiO₂) hybrid composite films were prepared via sol–gel reactions from mixtures of PVDF and tetraethoxysilane in dimethylacetamide. Their morphology, crystalline structure, and thermal, mechanical, and electrical properties were examined. For morphology measurements, scanning electron microscopy and optical microscopy were applied. X‐ray diffraction and infrared analyses showed that the crystalline structure of PVDF was not changed much by the addition of SiO₂, indicating that there was no interaction between PVDF and SiO₂. With increasing SiO₂ content, the melting temperature rarely changed, the degree of crystallinity and the dielectric constant decreased, and the decomposition temperature slightly increased. A PVDF/SiO₂ hybrid composite film with 5 wt % SiO₂ exhibited balanced mechanical properties without a severe change in the crystalline structure of PVDF, whereas for the hybrid composites with higher SiO₂ contents (>10 wt %), the mechanical properties were reduced, and the spherulite texture of PVDF was significantly disrupted by the presence of SiO₂ particles. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 19–30, 2002     

Effect of poly(ethylene oxide) on the structure and properties of poly(vinyl alcohol)

To improve the drawability of poly(vinyl alcohol) (PVA) thermal products, poly(ethylene oxide) (PEO), a special resin with good flexibility, excellent lubricity, and compatibility with many resins, was applied, and the Fourier transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WXRD) were adopted to study the hydrogen bonds, water states, thermal properties, crystal structure, and nonisothermal crystallization of modified PVA. It was found that PEO formed strong hydrogen bonds with water and PVA, thus weakened the intra‐ and inter‐hydrogen bonds of PVA, changed the aggregation states of PVA chains, and decreased its melting point and crystallinity. Moreover, the interactions among PVA, water, and PEO retarded the water evaporation and made more water remain in the system to plasticize PVA. The existence of PEO also slowed down the melt crystallization process of PVA, however, increased the nucleation points of system, thus made more and smaller spherulites formed. The weakened crystallization capability of PVA and the lubrication of PEO made PVA chains to have more mobility under the outside force and obtain high mechanical properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1946–1954, 2010     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

Thermal properties of poly(butylene oxalate) copolymerized with azelaic acid

Poly(butylene oxalate) (PBO) and poly(butylene oxalate/butylene azelate) random copolymers (PBOBAz) of various compositions were synthesized in bulk and characterized in terms of chemical structure and thermal properties. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All copolymers were found to be partially crystalline and thermally stable up to about 290 °C. The main effect of copolymerization was a decrease in melting and glass transition temperatures with respect to PBO homopolymer. The pure crystalline phase characteristic of PBO was evidenced by means of X-ray measurements in all the copolymers under investigation. The fusion temperatures appeared to be well correlated to composition by Baur's equation.Amorphous samples were obtained after melt quenching and showed a monotonic decrease of glass transition temperatures as the content of the flexible butylene azelate units is increased. Fox equation described well the T_g-composition data. Lastly, the overall crystallization rate of PBO was found to decrease regularly with increasing butylene azelate unit content.     

Thermal and dynamic mechanical properties of poly(propylene carbonate)

Summary Thermal and dynamic mechanical properties of carbon dioxide and propylene oxide alternative copolymer, poly(propylene carbonate) (PPC), and the end-capped PPC with maleic anhydride were investigated by means of TG and DMA. A master curve of the storage modulus vs. frequency can be deduced from the isochronal curves. Physical parameters of both plain and MA end-capped PPC were discussed. The results showed that for maleic anhydride (MA) end-capping PPC, an improvement of its thermal stability and mechanical properties accompanied with some modifications of the viscoelastic behavior were obtained.     

Synthesis and properties of novel conjugated poly(silylacetylene silazane)s

A series of novel conjugated polymers, poly(silylacetylene silazane)s having different substituents, were prepared by ammonolysis of the corresponding α,ω‐dichlorosilyleneacetylene oligomers. The structures and properties of the poly(silylacetylene silazane)s were characterized by Fourier transform infrared, ¹H, ¹³C, ²⁹Si NMR, and elemental analyses, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and spectrofluorophotometry. The resulting polymers had good thermal properties and were moderately fluorescent. Their thermal stability was improved, and obvious red shift was observed when a phenyl substituent was attached on a silicon atom of polymers in the emission spectra. These polymers have the potential to be used as light‐emitting materials with good thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2897–2903, 2004     

反式-9, 10-二氢-9, 10-二(1-萘基)-9, 10-菲二醇的包合现象 与晶体结构

按文献方法合成了一个螯形主体分子,反式-9,10-二氢-9,10-二(1-萘基)-9,10-菲二醇。研究发现该主体可以和一些含氮杂环化合物形成一定比例的晶体包合物。用X-射线衍射分析二环己胺包合物的晶体结构表明,包合物中主客体之间存在O-H…N氢键相互作用,客体分子包合在主体分子形成的空腔中。