Unexpected reactivity for the RAFT copolymerization of oligo(ethylene glycol) methacrylates

Homo‐ and copolymers of di(ethylene glycol) methyl ether methacrylate (DEGMA) and oligo(ethyleneglycol) methyl ether methacrylate (OEGMA₁₁₀₀) were synthesized with various chain lengths via reversible addition fragmentation chain transfer (RAFT) polymerization in ethanol using [M]/[RAFT] ratios of 100 and 200. Kinetic investigations on the homo‐ and copolymerization of these monomers were performed using a parallel synthesizer resulting in well‐defined polymers with polydispersity indices mostly below 1.3. The polymerization kinetics are presented and discussed in detail surprisingly revealing that the DEGMA homopolymerization is slower than the OEGMA₁₁₀₀ homopolymerization. Transfer coefficients c were estimated to be ～0.5 for the RAFT polymerization of both DEGMA and OEGMA₁₁₀₀ resulting in hybrid behavior at the beginning of the polymerizations. Subsequent copolymerization also revealed fast incorporation of the OEGMA₁₁₀₀ and relatively slow incorporation of DEGMA resulting in well‐defined copolymers with a molecular weight up to 100 kDa and polydispersities around 1.20. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2811–2820, 2009     

Libraries of methacrylic acid and oligo(ethylene glycol) methacrylate copolymers with LCST behavior

Homopolymers of methacrylic acid (MAA), monoethyleneglycol methyl ether methacrylate (MEOMA), diethyleneglycol methyl ether methacrylate (MEO₂MA), oligo(ethyleneglycol) methyl ether methacrylate (OEGMA₄₇₅ and OEGMA₁₁₀₀) and oligo(ethyleneglycol) ethyl ether methacrylate (OEGEMA₂₄₆) were synthesized with various chain lengths via reversible addition fragmentation chain transfer (RAFT) polymerization. The homopolymers of MAA, MEOMA and OEGMA₁₁₀₀ did not show any cloud point (CP) in the range of 0–100 °C, whereas at a pH value of 7, the CPs were found to be 20.6, 93.7, and 20.0 °C for p(MEO₂MA), p(OEGMA₄₇₅) and p(OEGEMA₂₄₆), respectively, with an initial monomer to initiator ratio of 50. Furthermore, statistical copolymer libraries of MAA with OEGMA₄₇₅ and OEGMA₁₁₀₀ were prepared. The cloud points of the random copolymers of MAA and OEGMA₄₇₅ were found to be in the range of 20–90 °C; surprisingly, even though the homopolymers of MAA and OEGMA₁₁₀₀ did not exhibit any LCST behavior, the copolymers of these monomers at certain molar ratios (up to 40% OEGMA₁₁₀₀) revealed a double responsive behavior for both temperature and pH. Finally, the cloud points were found to be in the range of 22–98 °C, measured at pH values of 2, 4, and 7, while no cloud point was detected at pH 10. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7138–7147, 2008     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Alternating copolymers with degradability and quantitatively controlled thermosensitivity

To combine temperature responsivity and degradability, novel alternating copolymers with polyester backbone and oligo(ethylene glycol) side chain were designed and prepared by alternating ring‐opening copolymerization of succinic anhydride (SA) and functional epoxide monomer(s). The epoxide monomer containing one ethylene glycol unit, 2‐((2‐methoxyethoxy)methyl)oxirane (MEMO), has displayed similar copolymerization activity to that containing two ethylene glycol units, 2‐((2‐(2‐methoxyethoxy)ethoxy)methyl)oxirane (ME₂MO), when copolymerized with SA. This feature led to the formation of alternating copolymers with statistical random distribution of MEMO/ME₂MO units along the backbone when mixed MEMO/ME₂MO comonomers were fed. These polyesters possess degradability and quantitatively controlled lower critical solution temperature (LCST; 18–50 °C) and T_g (?40 to ?31 °C) both in linear relations with MEMO/ME₂MO feed ratio. Fine control of LCST near body temperature is thus realized for the reported degradable and thermoresponsive polyesters, which have promising applications in biomedical fields. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Phenylquinoxaline–Aryl ester block copolymers

Phenylquinoxaline–aryl ester block copolymers were synthesized using well-defined phenolic hydroxyl terminated oligomers via a monomers/oligomer approach. Phenylquinoxaline oligomers with molecular weights of 5600 and 12,900 g/mol were prepared from the condensation of 1,4-bis(phenylglyoxalyl)benzene and 3,3′-diaminobenzidine in the presence of 4-hydroxylbenzil. The oligomers were copolymerized with isophthaloyl chloride and bisphenol A in tetrachloroethane to afford the desired phenylquinoxaline–aryl ester block copolymers. Copolymers with polyester compositions ranging from 15–50 wt % were prepared by controlling the monomers/oligomer stoichiometry. The majority of the materials displayed single phase morphologies with T_gs intermediate to the T_gs for the poly (phenylquinoxaline) and polyester homopolymers. Plots of the reciprocal of the T_g of the copolymers versus composition agreed well with values predicted by the Fox equation. A multiphase morphology was obtained for the copolymer with the highest polyester block length (? 13,000 g/mol), which displayed a T_g at 190 and 300°C indicative of a glassy–glassy system. Significant improvement in the elongations were observed for the copolymers relative to the poly(phenylquinoxaline) homopolymer. The improved elongations were obtained with minimal sacrifice to the modulus. These materials represent the first example of poly(phenylquinoxaline) block copolymers from well-defined phenylquinoxaline oligomers.     

Synthesis and characterization of ABA-type block copolymer of poly(trimethylene carbonate) with poly(ethylene glycol): Bioerodible copolymer

ABA-type block copolymers of poly(trimethylene carbonate) with poly(ethylene glycol) (M_n 6820), PTMC-b-PEG-b-PTMC, were synthesized by the ring-opening polymerization of 1,3-dioxan-2-one (trimethylene carbonate) in the presence of poly-(ethylene glycol) with stannous octoate catalyst, and the copolymers with various compositions were obtained. The PTMC-b-PEG-b-PTMC copolymers were characterized with Fourier transform infrared and nuclear magnetic resonance spectroscopies. The intrinsic viscosities of resulting copolymers increased with the increase of 1,3-dioxan-2-one content in feed while the molar ratio of monomer over catalyst kept constant. It has been observed that the glass transition temperature (T_g) of the PTMC segments in copolymers, recorded from differential scanning calorimetry, was dependent on the composition of copolymers. The melting temperature (T_m) of PEG blocks in copolymer was lower than that of PEG polymer, and then disappeared as the length of PTMC blocks increased. The results of dynamic contact angle measurement clearly revealed that the hydrophilicity of resulting copolymers increased greatly with the increase of PEG content in copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 695–702, 1998     

Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Properties of ethylene–propylene–vinyl chloride graft copolymers. I. Viscoelasticity of ethylene–propylene copolymers

The viscoelastic behavior of two different ethylene–propylene copolymers was studied as a function of the molar ratios of the components and the distribution of the lengths of the ethylene and propylene sequences. The glass transition temperatures T_g agree with the values calculated from relations between T_g and component ratio established by other authors. The copolymer with longer ethylene and propylene sequences was found to exhibit a relaxation spectrum with a slope less steep than ?0.5. This broadening is explained by the broader distribution of friction factors of the statistical segments in this copolymer and by differences in crystallike nearest-neighbor packing.     

Oxyethylene copolymers with chloromethyl and (alkylthio)methyl or (alkylsulfonyl)methyl side groups: Syntheses and Tg/composition relationships

New classes of copolymers, poly[oxy(chloromethyl)ethylene]/poly[oxy-((alkylthio)methyl)ethylene] copolymers (CE-ATEs), poly[oxy((alkylthio)methyl)-ethylene]s (ATEs), poly[oxy(chloromethyl)ethylene]/poly[oxy((alkylsulfonyl)meth-yl)ethylene] copolymers (CE-ASEs), and poly[oxy((alkylsulfonyl)methyl)ethylene]s (ASEs) have been made for the first time. The thioether-containing polymers (CE-ATEs and ATEs) were synthesized by reacting poly[oxy(chloromethyl)ethylene] (CE, poly(epichlorohydrin)) with different amounts of sodium alkanethiolates. The sulfone-containing polymers (CE-ASEs and ASEs) were synthesized by oxidizing the CE-ATEs and ATEs using m-chloroperoxybenzoic acid. The Fox equation, a linear relationship, fit the T_g/composition data for most CE-ATEs. The T_g's of the CE-ASEs showed positive deviations from those calculated using the Fox equation. The Johnston equation, in which steric and/or polar interactions between dissimilar monomeric units are considered by using T_gAB (the T_g of the AB or BA dyad), fit the T_g/composition data for all copolymers in this study. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 495–504, 1998     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

Preparation of cycloolefin copolymers of a bulky tricyclopentadiene

Copolymerizations of ethylene and tricyclopentadiene (TCPD) are realized without formation of a gel with a high activity (3–18 × 10⁶ g/molZr·h) using a catalytic system of [Ph₂C(Flu)(Cp)]ZrCl₂/MMAO. The monomer reactivity ratios, r_ethylene and r_TCPD, determined through the Fineman‐Ross plot, are 6.4 and 0.044, respectively, indicating that TCPD insertion is unfavorable, negligibly allowing the successive TCPD insertions. A significant higher glass transition temperature (T_g) is attained than those observed for other reported cycloolefin copolymers at the same cycloolefin content. A T_g as high as 214 °C is attainable at 41 mol % TCPD content. The remaining double bond can be hydrogenated to saturated hydrocarbon or converted to an epoxide group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of repeating sequence copolymers of lactic,glycolic, and caprolactic acids

Repeating sequence copolymers of poly(lactic‐co‐caprolactic acid) (PLCA), poly(glycolic‐co‐caprolactic acid) (PGCA), and poly(lactic‐co‐glycolic‐co‐caprolactic acid) (PLGCA) have been synthesized by polymerizing segmers with a known sequence in yields of 50–85% with M_ns ranging from 18–49 kDa. The copolymers exhibited well‐resolved NMR resonances indicating that the sequence encoded in the segmers used in their preparation is retained and that transesterification is minimal. The exact sequences allowed for unambiguous assignment of the NMR spectra, and these standards were compared with the data previously reported for random copolymers. The glass transition temperatures (T_gs) of the PLCA and PGCA copolymers were found to depend primarily on monomer ratio rather than sequence. Sequence dependent T_gs were, however, noted for the PLGCA polymers with 1:1:1 L:G:C ratios; poly LGC and poly GLC exhibited T_gs that differed by nearly 8 °C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Glass transition temperatures of ABA poly(styrene-b-isoprene) block copolymers by differential scanning calorimetry

The glass transition behavior of two sets of ABA poly(styrene-b-isoprene) block copolymers was examined by differential scanning calorimetry. In one series, the triblock copolymers had different total molecular weights and the same (30 wt %) polyisoprene content, in the other, the molecular weight was constant (30,000 g/mol) and the elastomer content was the variable. For all triblock copolymers studied, the data show an inward shift for the glass transition temperatures T_g of the corresponding homopolymers. This shift increases for the rigid-phase T_g as the polystyrene block length decreases. Depending on their molecular characteristics, two, three, or only one T_g were found. The third T_g was interpreted in terms of the existence of an interphase. Some of these conclusions could be confirmed by transmission electron microscopy.     

Synthesis and properties of 4,4′-biphenyldicarboxylic acid and 2,6-naphthalenedicarboxylic acid

This article describes the synthesis and the properties of polyesters and copolyesters prepared from ethylene glycol, terephthalic acid, 4,4′ biphenyldicarboxylic acid (BDA), and 2,6-naphthlenedicarboxylic acid (NDA). The effect of incorporating varying levels of BDA and NDA on polyethylene terephthalate (PET) is described. Depending on the concentration, incorporation of BDA into PET leads to an improvement in glass transition temperature (T_g), strength, modulus, and barrier properties. Copolymers of PET containing up to about 50% BDA derived units are clear and have T_g's ranging from 85 to 105°C, making them suitable for applications where a high T_g along with clarity is important. Copolymers with higher BDA concentration are highly crystalline, with high rates of crystallization from the melt. Copolymerization of NDA with oligoethyleneterephthalate leads to copolymers that are generally amorphous. Crystallinity can be developed in copolymers with low concentration of NDA by thermal annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3139–3146, 1999     

The effects of polyelectrolytes on the inhibition and aggregation of calcium oxalate crystallization

The influence of polyelectrolytes with different architecture on spontaneous batch crystallization of calcium oxalate was investigated. A series of acidic acrylate block copolymers were been made, by radical polymerization, with defined molecular weight and structure. Radical polymerization of acrylic acid (AA) was carried out in the presence of α‐thiopolyethylene glycol monomethylether as a chain transfer agent to produce poly(ethylene glycolblockacrylic acid) copolymers. Poly(ethylene glycol) (PEG) block length in the copolymers was controlled by using three different molecular weight chain transfer agents (M_n = 350, 750 and 2000 g/mol). The presence of copolymers inhibited the crystal growth of calcium oxalate possibly through adsorption onto the active growth sites for crystal growth due to the charge and hydrophilic effects. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Self-association effects on phase behavior and thermal properties of poly(styrene-co-itaconic acid)/poly(butyl methacrylate-co-4-vinylpyridine) blends

Blends based on poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA11, PSIA27) and poly(n-butyl methacrylate-co-4-vinylpyridine) containing 26 or 37 mol% of 4-vinylpyridine (PBM4VP26, PBM4VP37) were prepared. Their phase behavior and thermal properties were investigated by several techniques. Specific interactions that occurred between these copolymers were evidenced by FTIR from the appearance of characteristic new bands. The different T _g-composition behaviors of these systems evidenced by DSC and interpreted in terms of different types and strength of interactions that occurred within these blends, were analyzed by Kwei and “BCKV” (Brostow, Chiu, Kalogeras, Vassilikou-Dova) approaches. The positive deviation from the weight average of their constituent T _g’s, observed with the PSIA11/PBM4VP26 and PSIA11/PBM4VP37 systems, is due to the presence of strong specific interactions that occurred within this system while the practically similar S shaped curves obtained with PSIA27/PBM4VP26 and PSIA27/PBM4VP37 blends indicate that, due to self-association of carboxylic groups within PSIA27, a reduced number of efficient specific interactions occurred within these blends even though containing relatively higher amounts of interacting species. A thermogravimetric analysis confirmed improved thermal stability of these blends over the individual copolymers.     

Metal‐free synthesis of responsive polymers: Cloud point tuning by controlled “click” reaction

Nitroxide‐mediated radical polymerization has been used for the preparation of pentafluorostyrene (PFS) homopolymers and random copolymers of PFS and oligo(ethyleneglycol) methacrylate (OEGMA_8.5). The poly(pentafluorostyrene) homopolymers were reacted with thiophenol at different ratios at room temperature in the presence of triethylamine. The “clicked” polymers were characterized by ¹H and ¹⁹F NMR spectroscopy and size exclusion chromatography. Moreover, the copolymerization kinetics of the PFS and OEGMA_8.5 copolymers was followed, and the phase transition behavior of random copolymers with different compositions was discussed. Furthermore, copolymers of PFS and 2‐(dimethylamino) ethyl methacrylate (DMAEMA) were prepared at various mole ratios, and the copolymer with a 10:90 ratio, respectively, was soluble in water at room temperature. Turbidimetry measurements were performed for PFS and OEGMA_8.5 or DMAEMA copolymers to determine their cloud points. Finally, the PFS and OEGMA_8.5 copolymer with a mole ratio of 60:40 was reacted further with thiophenol to increase the hydrophobic part in the copolymer. The cloud points of the obtained copolymers could be tuned from 87 to 33 °C by using not only the controlled radical polymerization but also the “click” reaction in a controlled fashion. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1278–1286, 2010