Atom transfer radical polymerization of methyl acrylate,methyl methacrylate and styrene in the presence of trolamine as a highly effective promoter

Transition metal-mediated atom transfer radical polymerization(ATRP) is a ‘‘living'/controlled radical polymerization. Recently, there has been widely increasing interest in reducing the high costs of catalyst separation and post-polymerization purification in ATRP. In this work, trolamine was found to significantly enhance the catalytical performance of Cu Br/N,N,N0,N0-tetrakis(2-pyridylmethyl) ethylenediamine(Cu Br/TPEN) and Cu Br/tris[2-(dimethylamino) ethylamine](Cu Br/Me6TREN). With the addition of 25-fold molar amount of trolamine relative to Cu Br, the catalyst loadings of Cu Br/TPEN and Cu Br/Me6 TREN were dramatically reduced from a catalyst-to-initiator ratio of 1 to 0.01 and 0.05,respectively. The polymerizations of methyl acrylate, methyl methacrylate and styrene still showed first-order kinetics in the presence of trolamine and produced poly(methyl acrylate), poly(methyl methacrylate) and polystyrene with molecular weights close to theoretical values and low polydispersities. These results indicate that trolamine is a highly effective and versatile promoter for ATRP and is promising for potential industrial application.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Copper-based reverse ATRP process of styrene in mixed solvents

Xylene/N,N-dimethylformamide (DMF) and xylene/ethanol were employed as mixed solvents, respectively, for the reverse atom transfer radical polymerization (R-ATRP) of styrene with the azobisisobutyronitrile (AIBN)/CuBr₂/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) initiating system. With a limited amount of DMF added in, CuBr₂/PMDETA complex could dissolve well in the reaction system, so the control of polymerization was enhanced compared with the one in which simplex xylene was used as solvent. But the polarity of DMF leaded kinetics to deviation from first order. Ethanol could also improve the solubility of catalyst and be scavenged quickly by argon at 110°, therefore the impact of polarity of solvent on kinetics was negligible. Induction periods were not observed here indicating rapidly establishment of equilibrium between Cu(I) and Cu(II). This method that adding a little amount of polar solvent with low boiling point into non-polar solvent gives a new way to solve the problem of poor solubility of the catalyst in R-ATRP.     

Self-initiated atom transfer radical polymerization of methyl methacrylate in cyclohexanone

The self-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in cyclohexanone (CHO) in the presence of CuCl₂/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) is reported. The linear semilogarithmic plot of ln([M]₀/[M]) vs time, the linear increase of number-average molecular weight (M_n) with conversion, and rather narrow molecular weight distributions (MWDs) have been observed, which are in agreement of the characteristics of living/controlled polymerization. The NMR spectrum revealed the existence of terminal chlorine. The chain extension further proved the living characteristic. The polymerization can only be successful using CHO as the solvent, and is well controlled at the temperature as low as 50 °C. The effects of ligand, solvent, temperature and monomer to catalyst ratio are all discussed.     

Dispersion copolymerization of styrene and butyl acrylate in polar solvents

Monodisperse copolymer particles from 1.1 to 2.6 μm in diameter were obtained by unseeded batch dispersion copolymerization of styrene and butyl acrylate in an ethanol–water medium. A two-level factorial design using bottle polymerizations was initially carried out including the following variables: stabilizer concentration, initiator concentration, polarity of the dispersion medium, initial monomer concentration, and temperature. Once the region of experimental conditions in which monodisperse latexes can be prepared was identified, further effort was devoted to analyze the effect of other variables. It was found that the temperature at which nucleation occurs and the evolution of the temperature after the onset of nucleation were critical to obtain monodisperse particles. The particle size increased with increasing initial monomer concentration and ethanol–water weight ratio, and decreasing stabilizer concentration. A minimum quantity of emulsifier was necessary to avoid coalescence of particles and to obtain monodisperse particles. © 1996 John Wiley & Sons, Inc.     

Iron‐mediated AGET ATRP of methyl methacrylate using metal wire as reducing agent

Methyl methacrylate (MMA) were successfully polymerized by atom transfer radical polymerization with activator generated by electron transfer (AGET ATRP) using copper or iron wire as the reducing agent at 90°C. Well‐controlled polymerizations were demonstrated using an oxidatively stable iron(III) chloride hexahydrate (FeCl₃·6H₂O) as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, and tetrabutylammonium bromide (TBABr) or triphenylphosphine as the ligand. The polymerization rate was fast and affected by the amount of catalyst and type of reducing agents. For example, the polymerization rate of bulk AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀ = 500/1/0.5/1 using iron wire (the conversion reaches up to 82.2% after 80 min) as the reducing agent was faster than that using copper wire (the conversion reaches up to 86.1% after 3 h). At the same time, the experimental M_n values of the obtained poly(methyl methacrylate) were consistent with the corresponding theoretical ones, and the M_w/M_n values were narrow (～1.3), showing the typical features of “living”/controlled radical polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ambient temperature ATRP of benzyl methacrylate as a tool for the synthesis of block copolymers with styrene

The rapid atom transfer radical polymerization (ATRP) of benzyl methacrylate (BnMA) at ambient temperature was used to synthesize block copolymers with styrene as the second monomer. Various block copolymers such as AB diblock, BAB symmetric and asymmetric triblock, and ABABA pentablock copolymers were synthesized in which the polymerization of one of the blocks namely BnMA was performed at ambient temperature. It is demonstrated that the block copolymerization can be performed in a controlled manner, regardless of the sequence of monomer addition via halogen exchange technique. Using this reaction condition, the composition (ratio) of one block (here BnMA) can be varied from 1 to 100. It is further demonstrated that in the multiblock copolymer syntheses involving styrene and benzyl methacrylate, it is better to start from the PS macroinitiator compared with PBnMA macroinitiator. The polymers synthesized are relatively narrow dispersed (<1.5). It is identified that the ATRP of BnMA is limited to certain molecular weights of the PS macroinitiator. Additionally, a preliminary report about the synthesis of the block copolymer of BnMA‐methyl methacrylate (MMA), both at ambient temperature, is demonstrated. Subsequent deprotection of the benzyl group using Pd/C? H₂ results in methacrylic acid (MAA)–methyl methacrylate (MAA–MMA) amphiphilic block copolymer. GPC, IR, and NMR are used to characterize the synthesized polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2848–2861, 2006     

Ambient temperature living radical copolymerization of styrene and methyl methacrylate with sodium hypophosphite as reducing agent

A facile, safe and economical reducing agent, sodium hypophosphite(Na H2PO2·H2O), has been successfully employed for ambient temperature living radical copolymerization of styrene(St) and methyl methacrylate(MMA). Such effective reducing agent significantly improved the reactivity of low reactive St monomers during the copolymerization, where the reactivity ratios of St and MMA were determined to be 0.50 and 0.36 by Finemann-Ross method. Thus the copolymerizations proceeded fast and showed typical living/controlled features, as evidenced by pseudo first-order kinetics of polymerization, linear increase in molecular weight versus monomer conversion, and low polydispersity index values. Effects of the concentration of reducing agent and the monomer feed ratio on the copolymerization were investigated in detail. Furthermore, gel permeation chromatography and 1H-NMR analyses as well as chain extension experiments confirmed the high chain-end functionality of the resultant copolymer.     

Straightforward synthesis of poly(lauryl acrylate)-b-poly(stearyl acrylate) diblock copolymers by ATRP

Lauryl (LA) and stearyl (SA) acrylates were successfully polymerized by atom transfer radical polymerization (ATRP), leading to well defined homopolymers and diblock copolymers (PDI < 1.2). Interestingly, the polymerization was very well controlled using N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), a ligand which had initially been reported to be unadvisable for the polymerization of such monomers. Both kinetic studies and chain extension reactions supported our conclusions. A PLA₆₅-b-PSA₄₇ diblock copolymer was characterized by differential scanning calorimetry and dynamic thermo-mechanical analysis, revealing that both blocks exhibit side-chain crystallinity and phase segregate in the crystalline state. The diblock behaves as a brittle rigid polymer when both blocks are crystalline, as a ductile material after the melting of the PLA phase and becomes a viscous liquid when both blocks are molten. This work could be extended to the preparation of PSA-b-PLA-b-PSA bio-issued thermoplastic elastomers.     

Direct synthesis of amphiphilic block copolymers, consisting of poly(methyl methacrylate) and poly(sodium styrene sulfonate) blocks through atom transfer radical polymerization

Amphiphilic block copolymers of methyl methacrylate (MMA) and sodium styrene sulfonate (SSNa) were successfully synthesized via direct atom transfer radical polymerization (ATRP) of SSNa. First, poly(sodium styrene sulfonate) (PSSNa) or poly(methyl methacrylate) (PMMA) macroinitiators were prepared using proper ATRP systems for each case. In some cases, functional initiators, which allow further reactions, were used. The macroinitiators were characterized and further used to synthesize PSSNa/PMMA block copolymers, by using proper solvent combinations, such as N,N-dimethylformamide/water or methanol/water at appropriate volume ratios, in order to ensure solubility of the synthesized amphiphilic copolymers. The molecular weight of the copolymers was determined by gel permeation chromatography, using water as eluent. By using a combination of analytical techniques like ¹H NMR, FTIR and thermogravimetry, the chemical structure and the actual copolymer composition were determined. Since, the block copolymers were soluble in water, forming hydrophilic/hydrophobic domains in aqueous solution, their micellization behavior was further studied by pyrene fluorescence probing.     

ATRP of 3-(triethoxysilyl)propyl methacrylate and preparation of “stable” gelable block copolymers

ATRP of a gelable monomer, 3-(triethoxysilyl)propyl methacrylate (TESPMA), mediated by CuBr/N,N,N’,N’’,N”-pentamethyldiethylenetriamine (PMDETA) using ethyl 2-bromoisobutyrate (2-EBiB) as initiator was studied. The results indicate that polymerization follows the first-order kinetic. PolyTESPMA (PTESPMA) is much more stable to moisture which is important for exploring the properties of its block copolymer. A series of PEO-b-PTESPMA block copolymers with different composition were prepared. Self-assembly of PEO-b-PTESPMA has also been explored in a mixture of methanol and water and polymeric vesicles have been obtained. By introducing the gelation catalyst, the block copolymer vesicles can be stabilized by the silica networks.     

Synthesis of bis-allyloxy functionalized polystyrene and poly (methyl methacrylate) macromonomers using a new ATRP initiator

A new bis-allyloxy functionalized ATRP initiator, viz, 4,4-bis (4-(allyloxy) phenyl) pentyl-2-bromo-2-methylpropanoate was synthesized starting from commercially available 4,4-bis (4-hydroxyphenyl) pentanoic acid. Atom transfer radical polymerization of styrene in bulk and that of methyl methacrylate in anisole using CuBr/N,N,N′,N′,N″-pentamethyldiethylenetriamine system was carried out. The kinetic study of styrene polymerization showed controlled polymerization behavior. Bis-allyloxy functionalized well-defined polystyrene (M_n^GPC: 13,600–28,250, PDI: 1.07–1.09) and poly (methyl methacrylate) (M_n^GPC: 10,100–18,450, PDI: 1.23–1.34) macromonomers were obtained. The presence of allyloxy functionality was confirmed by ¹H NMR spectroscopy. The reactivity of allyloxy functionality was demonstrated by carrying out organic reactions such as addition of bromine and hydrosilylation on polystyrene macromonomer. Polystyrene macromonomer with bis-allyloxy functionality was transformed into bis-epoxy functionalized polystyrene macromonomer using 3-chloroperoxybenzoic acid.     

Controlled/“living” atom transfer radical polymerization of methyl methacrylate in the synthesis of triblock copolymers from a poly(oxyethylene) macroinitiator

Atom transfer radical polymerization of methyl methacrylate initiated by a poly(oxyethylene) macroinitiator by the esterification of PEG 1500 with 2-chloro propionyl chloride was synthesized. These polymerization proceeds both in bulk and solution with a quantitative initiation efficiency, leading to A-B-A triblock copolymers. The macroinitiators and their block copolymers were characterized by FT-IR, FT-NMR and GPC analyses. In bulk polymerization, the kinetic study showed that the relationship between ln[M]₀/[M] vs time was linear showing that there is a constant concentration of active species throughout the polymerization and follow the first order kinetics with respect to monomer. Moreover, the experimental molecular weight of the block copolymers increased linearly with the monomer conversion and the polydispersity index remained between 1.3 and 1.5 throughout the polymerization. No formation of homo poly(methyl methacrylate) could also be detected, and all this confirms that the bulk polymerization proceeds in a controlled/“living” manner.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

原子转移自由基聚合合成(甲基)丙烯酸酯类模型聚合物及其动力学研究

本文采用一种新颖的活性自由基聚合—原子转移自由基聚合（ＡＴＲＰ）的方法，以１－溴代苯乙烷作为引发剂，过渡金属卤化物与配位剂络合物（ＣｕＢｒ／２，２’－联吡啶）为催化体系，环己酮为溶剂，进行了甲基丙烯酸正丁酯（ＢＭＡ）和丙烯酸正丁酯（ＢＡ）的活性聚合。得到具有指定分子量和窄分子量分布（１．２＜Ｍｗ／Ｍｎ＜１．５）的模型聚合物。计算并讨论了两聚合体系的ＡＴＲＰ的动力学数据     

A neutral Ni(II) acetylide-mediated radical polymerization of methyl methacrylate using the atom transfer radical polymerization method

A neutral nickel σ-acetylide complex [Ni(CCPh)₂(PBu₃)₂] (NBP) is used for possible atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in conjunction with an organic halide as an initiator [R-X: CCl₄, CH₃Cl, BrCCl₃, C₂H₅Br, and C₅H₉Br] in toluene at 80 °C. Among these initiating systems, BrCCl₃/NBP gave the best controlled radical polymerization of MMA and produced polymer with relatively narrow molecular weight distribution (M_w/M_n≈1.3). The ATRP of MMA is preliminarily identified by the following facts: (1) the present MMA polymerization initiated by BrCCl₃/NBP is completely hindered by the addition of TEMPO; (2) the conversion shows a typical linear variation with time in semilogarithmic coordinates; (3) the measured number-average molecular weights of polymer show a linear increase with conversion and agree closely with the theoretical values; (4) the resulting polymer chain contains a dormant carbon-halogen terminal.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005