Spectroscopic analysis on the resveratrol-DNA binding interactions at physiological pH

The interaction of resveratrol with calf thymus deoxyribonucleic acid (ctDNA) under physiological conditions (Tris–HCl buffer solutions, pH 7.4) was studied by spectroscopy, fluorescence spectroscopy and viscosity measurement method, respectively. Results indicated that a complex of resveratrol with ctDNA was formed with a binding constant of K_{17 °C} = 5.49 × 10³ L mol⁻¹ and K_{37 °C} = 1.90 × 10⁴ L mol⁻¹. The fluorescence quenching mechanism of acridine orange (AO)-ctDNA by resveratrol was shown to be a static quenching type. The thermodynamic parameters of the complex were calculated by a double reciprocal method: , and (37 °C). Spectroscopic techniques together with viscosity determination provided evidences of intercalation mode of binding for the interaction between resveratrol and ctDNA.     

Topotactic Oxidation of the Quadruple-Rutile-Type Chain Structure Na0.875Fe0.875Ti1.125O4

Sodium removal from Na_0.875Fe_0.875Ti_1.125O₄by means of oxidizing agents leads to the formation of the defect solid solution Na_0.875−δFe_0.875−δTi_1.125O₄(0≤δ≤0.44). A systematic increase in theparameter of the orthorhombic unit cell is observed as the sodium content is reduced, while theparameter decreases only slightly. The cell volume remains almost constant as a consequence of the irregular change in theparameter and the different behavior of both theandparameters. Structural changes have been followed by Rietveld powder diffraction analysis. Room- and low-temperature Mössbauer studies confirm the increase in the Fe⁴⁺state with decreased sodium content in the less extracted samples withδ=0.10 and 0.15, whereas a maximum Fe⁴⁺content (about 21%) is reached in a sample withδ=0.25. Surprisingly, the amount of Fe⁴⁺does not increase with further sodium extraction. This is thought to be related to the greater oxidative power of the more oxidized materials, which facilitates a subsequent partial backreduction of Fe⁴⁺formed during the oxidation procedure. Results of both Mössbauer spectroscopy and structure refinements indicate that the Fe⁴⁺cations randomly occupy both octahedral metal positions,M(1) andM(2), of each quadruple rutile unit.     

Volumetric and viscometric study of aqueous binary mixtures of some glycol ethers at T = (275.15 and 283.15) K

The experimental data for the density (ρ) and viscosity (η) are reported for aqueous binary mixtures of different glycol ethers, namely ethylene glycol monomethyl ether (EGMME), ethylene glycol monoethyl ether (EGMEE), diethylene glycol monomethyl ether (DEGMME), and diethylene glycol monoethyl ether (DEGMEE), at different temperatures (T = 275.15 K and 283.15 K) within the concentration range 0 mol · kg⁻¹ to 0.1 mol · kg⁻¹. The values of density (ρ) and viscosity (η) of the solutions were used to compute different derived parameters, such as apparent molar volume (?_V) of the solute, excess molar volume (V^E) of the solution, viscosity B and D coefficients of solution and temperature coefficient of viscosity B-coefficient (dB/dT) of solution. The limiting apparent molar volume of the solutes () have been obtained for aqueous binary mixtures of these glycol ethers by smooth extrapolation of ?_V–m curves to zero concentration. By using the values of , the limiting excess partial molar volumes () have also been calculated. The results are interpreted in term of various interactions such as solute–solvent interactions and hydrogen bonding.     

Diffusion coefficients of the ternary system (2-hydroxypropyl-β-cyclodextrin + caffeine + water) at T = 298.15 K

Ternary mutual diffusion coefficients measured by Taylor dispersion method (D₁₁, D₂₂, D₁₂, and D₂₁) are reported for aqueous solutions of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) + caffeine at T = 298.15 K at carrier concentrations from (0.000 to 0.010) mol · dm⁻³, for each solute, respectively. These diffusion coefficients have been measured having in mind a better understanding of the structure of these systems and thermodynamic behaviour of caffeine and 2-hydroxypropyl-β-cyclodextrin in solution. For example, from these data it will be possible to estimate some parameters, such as the fraction of associated species HP-β-CD (X₁) and caffeine (X₂) in this complex, the monomer and dimer fractions, and , respectively, and the limiting diffusion coefficients of the HP-β-CD, , of the dimers caffeine entities, , and of those complexes (1:1), .     

The partial molar heat capacity, expansion, isentropic, and isothermal compressions of thymidine in aqueous solution at T = 298.15 K

Solution densities have been determined for aqueous solutions of thymidine at T = (288.15, 298.15, 303.15, and 313.15) K. The partial molar volumes at infinite dilution, , obtained from the density data were used to derive the partial molar isobaric expansion at infinite dilution for thymidine at T = 298.15 K, . The partial molar heat capacity at infinite dilution for thymidine, , at T = 298.15 K has also been determined. Sound speeds have been measured for aqueous solutions of thymidine at T = 298.15 K. The partial molar isentropic compression at infinite dilution, , and the partial molar isothermal compression at infinite dilution, , have been derived from the sound speed data. The , , , and results for thymidine are critically compared with those available from the literature.     

Activity coefficients at infinite dilution of organic solutes in N-alkylpyridinium bis(trifluoromethylsulfonyl)imide ([CnPY][NTf2], n = 2, 4, 5) using gas–liquid chromatography

The activity coefficients at infinite dilution, for both polar and non-polar solutes in the ionic liquids N-alkylpyridinium bis(trifluoromethylsulfonyl)imide ([C_nPY][NTf₂], n = 2, 4, 5) have been determined by gas–liquid chromatography using the ionic liquid as the stationary phase. The measurements were carried out at the temperatures from (303 to 353) K. The partial molar excess enthalpies at infinite dilution of the solutes in the ionic liquids were also derived from the temperature dependence of the values. The values of the selectivity for the hexane/benzene and cyclohexane/benzene separation problems were calculated from experimental infinite dilution activity coefficient values and compared to the other ionic liquids, taken from the recent literatures.     

Volumetric behaviour of binary and ternary liquid systems composed of ethanol, isooctane, and toluene at temperatures from (298.15 to 328.15) K. Experimental data and correlation

The densities and speeds of sound of (ethanol + isooctane), (ethanol + toluene), and (ethanol + isooctane + toluene) were measured at four temperatures over the range (298.15 to 328.15) K, and the respective values of excess volumes and adiabatic compressibility κ_S were calculated. The and κ_S values for the binary systems were fitted to the Redlich–Kister equation. The respective ternary data together with corresponding binary data were then fitted to the modified Redlich–Kister equation considering various numbers of ternary constants. It was found that even for the systems containing self-associating alcohol, only one ternary parameter is sufficient to describe well the ternary system.     

Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide

The activity coefficients at infinite dilution, for 36 solutes: alkanes, cycloalkanes, alkenes, alkynes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, ethers, acetone, and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide [bmPY][NTf₂] were determined by gas–liquid chromatography at temperatures from 298.15 K to 368.15 K. The partial molar excess enthalpies at infinite dilution values were calculated from the experimental values obtained over the temperature range. The selectivity for different separation problems were calculated from the and compared to the literature values for other ionic liquids, N-methyl-2-pyrrolidinone (NMP) and sulfolane.     

Synthesis and crystal structure of the isotypic rare earth thioborates Ce[BS3], Pr[BS3], and Nd[BS3]

The orthothioborates Ce[BS₃], Pr[BS₃] and Nd[BS₃] were prepared from mixtures of the rare earth (RE) metals together with amorphous boron and sulfur summing up to the compositions CeB₃S₆, PrB₅S₉ and NdB₃S₆. The following preparation routes were used: solid state reactions with maximum temperatures of 1323 K and high-pressure high-temperature syntheses at 1173 K and 3 GPa. Pr[BS₃] and Nd[BS₃] were also obtained from rare earth chlorides RECl₃ and sodium thioborate Na₂B₂S₅ by metathesis type reactions at maximum temperatures of 1073 K. The crystal structure of the title compounds was determined from X-ray powder diffraction data. The thioborates are isotypic and crystallize in the orthorhombic spacegroup Pna2₁ (No. 33; Z=4; Ce: , , ; Pr: , , ; Nd: , , ) . The crystal structures contain isolated [BS₃]^3‐ groups with boron in trigonal-planar coordination. The sulfur atoms form the vertices of undulated kagome nets, which are stacked along [100] according to the sequence ABAB. Within these nets every second triangle is occupied by boron and the large hexagons are centered by rare earth ions, which are surrounded by overall nine sulfur species.     

Dimethylsulfoxide as a kinetic booster for the chemical generation of singlet oxygen in methanol

The kinetic booster effect of dimethylsulfoxide on the chemical generation of singlet oxygen, ¹O₂, from the disproportionation of hydrogen peroxide catalyzed by molybdate ions in methanol has been evidenced by detection of the IR luminescence of ¹O₂ at 1270 nm and by ⁹⁵Mo NMR spectroscopy. DMSO interacts rapidly, through a direct oxygen transfer with the stable tetraperoxomolybdate , leading to DMSO₂ and to the unstable triperoxomolybdate , which releases ¹O₂. The procedure was applied to accelerate the dark singlet oxygenation of β-citronellol and α-terpinene.     

Magnetic and transport properties of RCr0.3Ge2 (R=Tb, Dy, Ho and Er) compounds

The magnetic and transport properties of ternary rare-earth chromium germanides RCr_0.3Ge₂ (R=Y and Tb-Er) have been determined. X-ray and neutron diffraction studies indicate that these compounds have the CeNiSi₂-type structure (space group Cmcm) [1]. Magnetic measurements reveal the antiferromagnetic ordering below T_N equal to 18.5 K (R=Tb), 11.8 K (Dy), 5.8 K (Ho) and 3.4 K (Er). From the neutron diffraction data the magnetic structures have been determined. For TbCr_0.3Ge₂ and DyCr_0.3Ge₂ at low temperatures the magnetic ordering can be described by two vectors k₁=(,0,0) and k₂=(,0,), and k₁′=(,0,0) and k₂′=(,0,), respectively. In HoCr_0.3Ge₂ and ErCr_0.3Ge₂ the ordering can be described by one propagation vector equal to (,,0) and (0,0,0.4187(2)), respectively. In DyCr_0.3Ge₂ some change in the magnetic ordering is observed at T_t=5.1 K. In temperature range from T_t to T_N the magnetic ordering is given by one propagation vector k=(,0,0). YCr_0.3Ge₂ is a Pauli paramagnet down to 1.72 K which suggests that in the entire RCr_0.3Ge₂ series the Cr atoms do not carry magnetic moments. All compounds studied exhibit metallic character of the electrical conductivity. The temperature dependencies of the lattice parameters reveal strong magnetostriction effect at the respective Nèel temperatures.     

A highly diastereoselective synthesis of 4-octulose and 2-deoxy-4-octulose from a d-fructose derivative

Bishydroxylation of methyl 1 with osmium tetraoxide proceeded with extremed high diastereoselectivity to give only methyl 2. Configurations of the new stereogenic centers (C-2,3) in 2 were determined by degradation of the C-5,6,7,8 fragment to the well-known methyl 7. Transformation of 2 into the required 10, was achieved by a methodology that implied, protection to 8, reduction of the ester group in 8 to a hydroxymethyl group in 9, and finally deprotection to the free 10. On the other hand, epoxidation reaction on 11 afforded only the corresponding 2,3-anhydro derivative 12 with configuration, as could be demonstrated by degradation to (S)-1,2,4-trimetoxybutane 16, which synthesis is reported herein.     

Ultrasonic velocities, densities, and excess molar volumes of binary mixtures of N,N-dimethyl formamide with methyl acrylate, or ethyl acrylate, or butyl acrylate, or 2-ethyl hexyl acrylate at T = 308.15 K

Ultrasonic velocities, u, densities, ρ, of binary mixtures of N,N-dimethyl formamide (DMF) with methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), and 2-ethyl hexyl acrylate (EHA), including pure liquids, over the entire composition range have been measured at T = 308.15 K. Using the experimental results, the excess molar volume, , partial molar volumes, , , and excess partial molar volumes, , have been calculated. Molecular interactions in the systems have been studied in the light of variation of excess values of calculated properties. The excess properties have been fitted to Redlich–Kister type polynomial and the corresponding standard deviations have been calculated. The positive values of indicate the presence of dispersion forces between the DMF and acrylic ester molecules. Further theoretical values of sound velocity in the mixtures have been evaluated using various theories and have been compared with experimental sound velocities to verify the applicability of such theories to the systems studied. Theoretical ultrasonic velocity data have been used to study molecular interactions in the binary systems investigated.     

Volumetric and conductometric studies on the interactions of dipeptides with sodium acetate and sodium butyrate in aqueous solutions at T = 298.15 K

Densities and conductivity data for the sodium carboxylate (sodium acetate and sodium butyrate)–dipeptides {(glycyl-l-glutamine and l-alanyl-l-glutamine) + water} systems were determined at T = 298.15 K. The apparent molar volumes of the peptides and the molar conductivity (Λ) of sodium acetate and sodium butyrate have been calculated. These data have been utilized to deduce the standard partial molar volumes (), standard partial molar volumes of transfer for dipeptide from water to aqueous sodium carboxylate solutions (Δ_tV^°), volumetric interaction coefficient, the limiting molar conductivity (Λ_°), and Walden product (Λ_°η). Both and Δ_tV^° for the dipeptides increase with increasing concentration of sodium carboxylate. The interpretation is that this result arises from the dominant interactions of the sodium carboxylate with the charged group and polar groups of peptides. The decrease in Λ_° of sodium carboxylate with increasing dipeptide concentration and nonconstant Walden product are attributed to the interactions of sodium carboxylate with peptide and friction resistance of the solvent medium.     

NMR spectroscopic study of xenon fluorides in the gas phase and of XeF2 in the solid state

The xenon fluorides, XeF₂, XeF₄, and XeF₆, were characterized by gas-phase and NMR spectroscopy, providing the first gas-phase NMR spectroscopic data for the xenon fluorides. Xenon difluoride was also characterized in the solid state by static and magic angle spinning (MAS) and NMR spectroscopy, providing experimental values for the (4260±10 ppm) and (125±5 ppm) shielding anisotropies in XeF₂. A method for encapsulating reactive fluoride samples for study by MAS NMR spectroscopy is also described.     

Thermodynamics and activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 1-butyl-1-methylpyrrolidinium tetracyanoborate

The activity coefficients at infinite dilution, , for 45 solutes, including alkanes, cycloalkanes, alkenes, alkynes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, ethers, acetone, and water, in the ionic liquid 1-butyl-1-methylpyrrolidinium tetracyanoborate, [BMPYR][TCB], were determined by gas–liquid chromatography at temperatures from 318.15 K to 368.15 K. The values of the partial molar excess Gibbs free energy , enthalpy , and entropy at infinite dilution were calculated from the experimental values obtained over the temperature range. The gas–liquid partition coefficients, K_L were calculated for all solutes and the Abraham solvation parameter model was discussed. The values of the selectivity for different separation problems were calculated from and compared to literature values for N-methyl-2-pyrrolidinone (NMP), sulfolane, 1-ethyl-3-methylimidazolium tetracyanoborate, [EMIM][TCB], 1-decyl-3-methylimidazolium tetracyanoborate, [DMIM][TCB], and similar ionic liquids. The densities of [BMPYR][TCB] in temperatures range from 318.15 K to 368.15 K, the temperature of fusion and the enthalpy of fusion were measured.     

Optical and thermal behavior of novel fluorinated polyimides capable of preparing colorless, transparent and flexible films

A new diamine, 1,5-bis(2-amino-4-trifluoromethylphenoxy)naphthalene (DA1524) was synthesized by the nucleophilic substitution reaction of 1,5-dihydroxynaphthalene and 4-chloro-3-nitrobenzotrifluoride in the presence of potassium carbonate in N,N-dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C in ethanol. DA1524 was then utilized to prepare a novel class of CF₃-containing polyimides. Intrinsic viscosities [η] of the polymer solutions at 25 °C were measured by the extrapolation of their viscosity numbers till zero concentration. and values of the resulting polymers were determined using gel-permeation chromatography (GPC). The polymers showed a good film-forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. In addition, the absorption edge values (λ₀) obtained from their UV–vis curves were determined, and all the resulting polyimides films exhibited high optical transparency. Thermal stability of the polymers was investigated using TGA analyses. The T_g values of the polyimides obtained from their DSC plots were quantified. Solubility of the samples in a variety of organic solvents was also tested.     

Isopiestic determination of the osmotic and activity coefficients of the {yKCl + (1 − y)K2HPO4}(aq) system at T = 298.15 K

The osmotic coefficients of aqueous mixtures of KCl and K₂HPO₄ have been measured at T = (298.15 ± 0.01) K by the isopiestic vapor pressure method over the range of ionic strengths from (2.3700 to 11.250) mol · kg⁻¹ using CaCl₂(aq) as the reference solution. Our new experimental results were modeled with an extended form of Pitzer’s ion-interaction model equations, both with the usual mixing terms and with Scatchard’s neutral–electrolyte mixing terms, and with the Clegg–Pitzer–Brimblecombe equations based on the mole-fraction-composition scale. There is a dearth of previously published isopiestic data for mixtures containing salts of and, consequently, no previous measurements are available for comparison with the present results. The present study yields mixing parameters for these three models that are needed for modeling the thermodynamic activities of solute components of natural waters and other complex aqueous electrolyte mixtures.     

Synthesis and crystal structure of a novel mixed valence tri-iron complex salt: [hexakis(thiazole)iron(II)][μ-oxo- bis(trichloroiron(III))]

The title compound, [Fe(tz)₆][Fe₂OCl₆] (1) (tz = thiazole) has been synthesized under argon by the reaction of anhydrous FeCl₃ with thiazole in ethanol. 1 crystallises in the cubic space group (no. 205) with . 1 consists of a face-centered cubic array of [Fe(tz)₆]² cations, with the oxo-bridged [Fe₂OCl₆]²⁻ anion occupying the cell and edge centres.     

Isotope and surface preparation effects on alkaline dioxygen reduction at carbon electrodes

The reduction of dioxygen in base was examined on several carbon electrode surfaces, particularly polished and modified glassy carbon (GC). Electrochemical pretreatment, fracturing, and vacuum heat treatment shifted the reduction peak positive, while adsorption of several covalent and physisorbed organic compounds shifted it negative. A reverse wave for O⁻₂ oxidation was observed in tetraethylammonium hydroxide electrolyte, and on GC surfaces preadsorbed with Co(II) phthalocyanine. An isotope effect was observed when H₂O + KOH and D₂O + KOD electrolytes were compared, with the largest effect observed on surfaces exhibiting the most positive reduction peak potential. The results indicate involvement of proton transfer in the rate limiting step of reduction, and a strong dependence of the electron transfer rate on the carbon surface condition. The results support a mechanism involving adsorption of O⁻₂ and associated enhancement of proton transfer from water to O⁻₂. Activation of the dioxygen reduction by surface pretreatment is attributed to increasing the concentration of adsorbed O⁻₂.