Evaluation of the thermal oxidative stability of polyimides via TGA techniques

Thermogravimetric analysis (TGA) has been used for many years to evaluate polymer thermal stability. The objective of this study is to determine if weight-loss curves from TGA and isothermal TGA (IGA) can be used to determine degradation activation energies and thus rank the thermal stability (TS) and thermooxidative stability (TOS) for selected polyimides. Two high-temperature stable addition-cured polyimides and two aromatic condensation polyimides, all four containing fluorinated connecting linkages in the dianhydride monomers, were compared. Three TGA kinetic methods (Coats/Redfern, Ingraham/Marier, Horowitz/Metzger) were used to determine the activation energy for decomposition in air. The results were then used to rank polyimide stability compared to more traditional rankings based on long-term isothermal air aging weight-loss (IWL) studies and thermal decomposition temperatures (T_d) from TGA data. Use of TGA coupled to a Fourier transform infrared (TGA–FTIR) spectrophotometer allowed for the simultaneous identification and relative quantification of evolved decomposition products (CO₂, CO, ArNCO, and CHF₃) of the four polyimides degraded in air or nitrogen. Isothermal TGA–FTIR (IGA–FTIR) was also done in air to determine the relative rate of product evolution at a constant temperature. Activation energies using TGA and IGA data were determined and then compared with IWL values for the degradation of the polyimide to examine for correlations of real-life thermal oxidative aging to accelerated aging techniques. The Coats/Redfern method and T_d were found to best reproduce stability rankings of those from long-term, high-temperature IWL studies. Together, they may provide a time-saving technique to evaluate polyimide thermal oxidative stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3943–3956, 1999     

An in situ Fourier transform infrared spectroscopy method for collecting real-time data for the liquid-phase reaction of CO2 and mono-ethanolamine in alcoholic solvent systems

A novel Fourier transform infrared (FTIR) spectroscopy method of analysis was developed to study the industrially important reaction of CO₂ with the primary amine, mono-ethanolamine (MEA), in n-propanol as representative alcoholic solvent. A semi-batch reactor with a piston like ‘floating’ head was specifically designed in order to study the reaction in the liquid phase, thereby eliminating the mass transfer limitations of a gas-liquid system. An attenuated total reflectance (ATR) probe was used to monitor the change in reagent and product concentrations in-situ. Successful spectral peak identification and calibrations were performed in order to collect real time, reaction kinetic data. Data analysis confirmed that the zwitterion reaction mechanism most accurately describes the reaction in non-aqueous systems.     

Correlating light and thermal stability of silver carboxylate complexes by infrared and 13C NMR spectroscopy

Bond nature of carboxylic groups can play an important role in Ag(I)-carboxylate compounds because light and thermal stability are important requirements for future applications such as antibacterial additives. A linear correlation between bond character and light stability of silver carboxylate complexes has been predicted by a direct relationship of infrared and ¹³C NMR spectroscopic data. This correlation is in agreement with the thermogravimetric analysis and provides a new approach to explore the interaction and the physical properties of metal-carboxylate bonds.     

The effect of TiO2 on the structure and devitrification behavior of potassium titanium germanate glass

The effect of replacing 20 mol% of GeO₂ by TiO₂ on the properties of potassium germanate glass was investigated. The structure and devitrification behaviour of glasses were studied by Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA) and X-ray diffraction (XRD). It was observed that potassium titanium germanate has a higher glass transition temperature and a higher thermal stability vs. crystallization. The presence of two exothermic peaks on the DTA curve of potassium germanate glass indicates the complex crystallization process. The XRD pattern of this glass heated at the temperature of the first crystallization peak indicated that the GeO₂ and K₂Ge₇O₁₅ were formed. Only the K₂TiGe₃O₉ phase was identified, in a case when potassium titanium germanate glass was heated at the temperature of the crystallization peak.     

松杉灵芝不同部位的红外光谱分析研究

采用红外光谱三级鉴定法对松杉灵芝菌盖、表皮、菌柄、子实体不同部位的红外光谱图进行了整体分析。结果表明:松杉灵芝的各部位均含萜类、甾醇类、氨基酸、多肽、蛋白质和糖苷类等物质。在松杉灵芝的一维红外光谱中,菌盖的1 649cm-1峰的相对强度明显比表皮、菌柄和子实体强,说明菌盖中所含的氨基酸、多肽、蛋白质物质的量比其它部位高;在二阶导数谱中,四者在1 720~1 600cm-1范围内峰形差别较大,进一步说明松杉灵芝不同部位所含氨基酸、多肽、蛋白质物质不一致;而二维相关红外光谱中,各部位自动峰的数目、峰位置和峰相对强度都有所不同,可推断松杉灵芝各部位本身所含的糖苷类物质是不一致的。     

Spectroscopic study of the degradation products in the holy water fonts in Santa Maria della Steccata Church in Parma (Italy)

Two holy water fonts (dated at the beginning of the XVII century) in the Santa Maria della Steccata Church in Parma (Italy) have recently been restored. Before the intervention, a detailed investigation on their degradation products was carried out to understand the mechanisms of alteration of the materials and to suggest appropriate restoration procedures.The analyses were performed by means of powder X-ray diffraction (XRD), micro-Fourier transform infrared (FTIR) and micro-Raman spectroscopies. Calcite, iron oxides, silicates and sodium chloride (from salted holy water) were found in the red coloured calcarenite. On and under the lead coverings, different lead oxides (mainly massicot), other lead salts (lead basic carbonate, cerussite, plumbonacrite Pb₁₀O(OH)₆(CO₃)₆ and lead-chlorine compounds as laurionite PbOHCl and phosgenite Pb₂CO₃Cl₂) were identified by Raman spectroscopy and XRD. Haematite α-Fe₂O₃, goethite α-FeO(OH) and lepidocrocite γ-FeO(OH) were found on and around the iron hinges.Lead compounds and sodium chloride, through crystallization and solubilization cycles, were responsible for the stone's degradation, whereas the iron corrosion materials on the hinges produced mechanical stress and cracks in the stone.Various suggestions have been given on how to restore these fonts and to remove the causes of damage.     

In situ FTIR diagnostics of the radio-frequency plasma decomposition of N2O

The decomposition of N₂O in a 13.56-MHz parallel-plate system was studied usingin situ Fourier transform infrared (FTIR) spectroscopy. Areas of two infrared absorption bands of N₂O recorded at 8 cm^–1 resolution were used to estimate relative gas-phase dissociation as a function of rf power and flow rate at 500 mT. Flow rate was found to strongly affect band areas over the range of powers investigated (10–90 W). The effect of rf power on band areas diminished above 40 W, probably due to poor plasma confinement. Distortion of the band shapes by the plasma permitted rotational temperatures to be estimated. Rotational temperature increased essentially linearly with power at constant flow rate, reaching 450 K at 80 W, but was independent of flow rate at constant power. Rotational temperatures were also found to depend on the temperature of the electrodes, which were heated by plasma exposure. No infrared-active product species were observed even under batch conditions where all N₂O was irreversibly dissociated. This lack of detectable products and a 50% pressure rise observed in a batch study suggest that N₂ and O₂ are the primary stable discharge products.     

Determination of sucrose by flow injection analysis with fourier transform infrared detection

A new methodology for the determination of sucrose in complex aqueous matrices by flow injection analysis with FTIR detection is presented. The methodology based on the enzymatic hydrolytic cleavage of sucrose by means of invertase to -D-glucose and -D-fructose. A special manifold consisting of two internally coupled injection valves being switched simultaneously is applied to facilitate recording FTIR spectra of the sample before and after the enzymatic reaction. The analytical readout is taken from the resulting difference spectrum obtained by subtracting the FTIR spectra of the sample before and after the reaction. The developed methodology uses a GC-IR software to continuously record the FTIR spectra of the effluent from the manifold. The proposed method gives linear results in the range of 10 to 100 mmol/l and has been successfully applied to the analysis of sucrose in synthetic mixtures as well as in real samples such as soft drinks.     

Screening effects in blends of a hyperbranched,dendrimer‐like polyester with poly(4‐vinyl phenol)

We previously reported self‐association and interassociation equilibrium constant values describing hydrogen bonding in solutions of a hyperbranched polyester. These allow us to estimate the extent of intramolecular screening and the fraction of same‐chain contacts in this system as a function of generation number. In this article, we use a similar method to evaluate the degree of intramolecular screening in polymer blends. The calculated values reported here are consistent with those previously reported in our solution study, confirming the validity of the calculation procedures we used to evaluate the accessibility of functional groups in these highly branched systems. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1651–1658, 2001     

涂石蜡大米傅立叶变换红外吸收光谱识别分析

针对11种未涂石蜡大米和18个涂不同量石蜡的大米样品,以石油醚提取的油脂为试样,采用傅立叶变换红外光谱仪,扫描样品的傅立叶变换红外吸收光谱,并对光谱进行预处理,提取红外特征信息,将2855与1746、1462与1163 cm-1处特征峰的面积比值为坐标,采用Origín 6.0软件作识别分类图.结果表明:特征峰的面积比值与所涂石蜡量成线性变化,大米油脂的特征峰面积比值在一定的区域分布,涂以0.05%以上石蜡的大米,其油脂特征峰面积比值与未涂石蜡米油脂的值有一定区别.     

傅里叶变换红外光谱体表无创探测乳腺肿瘤

利用傅里叶变换红外(FTIR)光谱仪联合衰减全反射(ATR)探头的中红外光导纤维对46名健康志愿者及113名乳腺肿物患者的体表皮肤进行无创红外光谱测定, 并从分子水平比较、分析了正常乳腺和有肿物乳腺体表皮肤的红外光谱特征. 结果表明, 健康志愿者乳房皮肤8个FTIR光谱测定部位的图谱趋于一致; 正常乳腺体表与有肿瘤乳腺体表的吸收峰差异明显, 而1080 cm^-1处核酸相关吸收峰的变化对鉴别肿瘤的良、 恶性有重要意义.     

水汽在涂层中的扩散传输行为和存在形式

利用石英晶体微天平(QCM)为主要手段,研究了水汽在醇酸清漆和聚氨酯清漆涂层中的扩散传输行为.当相对湿度(RH)大于30％时,吸附和脱附动力学都符合Fick第二扩散定律,溶解性遵守Henry定律.计算出了平均扩散系数D.当吸水后的样品重新暴露于干燥空气时,总有一部分水残留于涂层中.傅利叶变换红外光谱仪(FTIR)测定表明吸水前和脱水后涂层分子结构发生了变化.残留水与涂层分子中的羰基C=O形成了氢键.水在涂层中有相当部分可能是以相互置换的链传递方式传输.形成氢键的速度比扩散速度快得多,当RH大于30％时,涂层中水的浓度足以支持其反应,扩散为吸水过程的控制步骤,此时表现为符合Fick第二扩散定律;当RH低于30％时,涂层中水的浓度不足以支持其反应,反应速度降到和扩散速度可相比,此时吸水过程开始偏离Fick第二扩散定律.     

Quantitative analysis of near surfaces three‐dimensional orientation of polymer chains in PET and PEN films using polarized ATR FTIR spectroscopy

Polarized attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy was utilized to characterize the three‐dimensional orientation of polymer chains near highly anisotropic surfaces generated by uniaxial drawing. A versatile method was proposed to analyze the molecular orientation of the polymers by combining the experimental refractive indices and optimized contact pressure by an anvil for solving the optical contact problem. This method is effective even when changes in the molecular orientation along the thickness direction caused by drawing are remarkable. In addition, this method enables quantitative comparison of the molecular orientation among different polymers in the same coordinate system. From the molecular orientation analysis of poly (ethylene terephthalate) (PET) and poly (ethylene naphthalate) (PEN), it was revealed that this method has a broader range of applications with high accuracy in estimating the molecular orientation of polymers compared with the conventional methods. The significant changes in the molecular orientation caused by uniaxial and biaxial drawing of PET and PEN films were quantitatively analyzed, and the reasons for the significant in‐plane orientation of PEN chains on the film plane are discussed. In addition, the difference in the molecular orientation between both sides of the films was also demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 870–879, 2010     

Miscibility,specific interactions,and self‐assembly behavior of phenolic/polyhedral oligomeric silsesquioxane hybrids

The miscibility of a phenolic resin with polyhedral oligomeric silsesquioxane (POSS) hybrids and the specific interactions between them were investigated with Fourier transform infrared (FTIR) spectroscopy and wide‐angle X‐ray diffraction (WAXD). An analysis of the morphology and microstructure was performed with polarized optical microscopy and atomic force microscopy (AFM). The interassociation equilibrium constant between the phenolic resin and POSS (38.7) was lower than the self‐association equilibrium constant of pure phenolic (52.3) according to the Painter–Coleman association model. This result indicated that POSS was partially miscible with the phenolic resin. A polarized optical microscopy image of a phenolic/POSS hybrid material (20 wt % POSS) indicated that the crystals of POSS were arranged evenly in the phenolic matrix; the self‐assembled array of POSS crystals was also confirmed by AFM. This phenomenon was consistent with the FTIR spectroscopy and WAXD analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1127–1136, 2004     

Mössbauer, vibrational spectroscopic and solution X-ray diffraction studies of the structure of iron(III) complexes formed with indole-3-alkanoic acids in acidic aqueous solutions

The chemical reactions between iron(III) and indole-3-acetic (IAA), -propionic (IPA), and -butyric (IBA) acids were studied in acidic aqueous solutions. The motivation of this work was that IAA is one of the most powerful natural plant-growth-regulating substances (phytohormones of the auxin series). Mössbauer spectra of the frozen aqueous solutions of iron(III) with indole-3-alkanoic acids as ligands (L), showed parallel reactions between Fe³⁺ and the ligands. Partly, it resulted in a complex formation which precipitated in aqueous solution and partly, in a redox process with iron(II) and the oxidised indole-3-alkanoic acids as products. The Mössbauer parameters of the Fe²⁺ species suggested a hexaaquo coordination environment. The chemical composition and coordination structure of the precipitated complexes were investigated using elemental analysis, Mössbauer spectroscopy, Fourier transform infrared (FTIR) and Raman spectroscopic techniques. The complexes were soluble in some organic solvents. So, Mössbauer, FTIR and solution X-ray diffraction measurements were carried out on the solution of complexes in acetone, hexadeutero acetone and methanol, respectively. The data obtained supported the existence of the μ-dihydroxo-bridging structure of the dimer: [L₂Fe<(OH)₂>FeL₂] (where L is indole-3-propionate, -acetate or -butyrate).     

Preliminary study on application of mid infrared spectroscopy for the evaluation of the virgin olive oil "freshness"

The freshness of virgin olive oils (VOO) from typical cultivars of Garda regions was evaluated by attenuated total reflectance (ATR) and Fourier transform infrared (FTIR) spectroscopy, in combination with multivariate analysis. The olive oil freshness decreased during storage mainly because of oxidation processes. In this research, 91 virgin olive oils were packaged in glass bottles and stored either in the light or in the dark at room temperature for different periods. The oils were analysed, before and after storage, using both chemical methods and spectroscopic technique.Classification strategies investigated were partial least square discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and soft independent modelling of class analogy (SIMCA).The results show that ATR-MIR spectroscopy is an interesting technique compared with traditional chemical index in classifying olive oil samples stored in different conditions. In fact, the FTIR PCA results allowed a better discrimination among fresh and oxidized oils, than samples separation obtained by PCA applied to chemical data. Moreover, the results obtained by the different classification techniques (PLS-DA, LDA, SIMCA) evidenced the ability of FTIR spectra to evaluate the olive oil freshness. FTIR spectroscopy results are in agreement with classical methods. The spectroscopic technique could be applied for the prediction of VOOs freshness giving information related to chemical modifications. The great advantages of this technique, compared to chemical analysis, are related to rapidity, non-destructive characteristics and low cost per sample. In conclusion, ATR-MIR represents a reliable, cheap and fast classification tool able to assess the freshness of virgin olive oils.     

Rapid Determination of Phenolics,Flavonoids, and Antioxidant Properties of Physalis ixocarpa Brot. ex Hornem. and Physalis angulata L. by Infrared Spectroscopy and Partial Least Squares

Physalis ixocarpa Brot. ex Hornem. and Physalis angulata L. are two edible species of the family Solanaceae, which have an important variety of antioxidant compounds present in their roots, stems, leaves, calyces, and fruits. This work reports the development of multivariate models based on the use of partial least square (PLS) analysis and Fourier transform infrared (FTIR) spectroscopy for the quantitative determination of total phenolics, total flavonoids, free radical scavenging activity, total antioxidant capacity, and reducing power in the extracts of roots, stems, and leaves of both P. ixocarpa and P. angulata. Standard chromatographic and colorimetric techniques were used to determine the quantitative actual values (references) in the extracts, which served as input data to develop the multivariate PLS models. Optimized FTIR-PLS models were realized by cross-validation procedures, obtaining the determination coefficients for prediction between 0.792 and 0.905 for P. ixocarpa, and between 0.756 and 0.893 for P. angulata. In this form, FTIR spectroscopy with multivariate analysis could represent a versatile tool to evaluate quantitatively concentrations of bioactive compounds and antioxidant properties in the extracts of both species, requiring a very short time at low cost.     

SEM–FTIR spectroscopic evaluation of deterioration in an historic coffered ceiling

Microorganisms generally degrade wood when moisture, oxygen and other environmental factors provide favorable growing conditions. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to study the development and transformation of the products formed during the biomineralization process that follows the deterioration of wood from an historical coffered ceiling (Cloister of St Francesc (XIV century), Palma de Mallorca, Spain). After fungi colonization, cellulose and lignin disappear and inorganic salts are formed. Thus, the secretion of numerous acids (initially oxalic acid) by fungal hyphae also leads to the precipitation of authigenic salts. Damaged cells or tissues enhance the formation and growth of crystals, which is strongly favored by fungi that function as calcification nuclei. Finally, the presence of dihydrated calcium sulfate reveals the contribution of environmental factors to the weathering of wood.     

Sequestration of Aqueous Lead(II) Using Modified and Unmodified Red Onion Skin

The efficacy of onion skins, both unmodified and chemically modified with thioglycolic acid, was investigated as alternative low-cost adsorbents for the sequestration of aqueous lead(II) ions from aqueous solution. The adsorbents were characterised using Fourier transform infrared spectroscopy and scanning electron microscopy – energy dispersive X-ray spectroscopy. Adsorption experiments were performed using batch sorption processes. The effects of contact time, pH, initial Pb(II) concentration, adsorbent dose, and temperature were investigated. Optimum sorption conditions were found at pH 4 and a 150?min equilibrium time for the modified onion skin and unmodified onion skin. The Langmuir, Freundlich, Dubinin-Radushkevich and Temkin models were used to characterize the equilibrium experimental results. The equilibrium process was best described by the Freundlich isotherm. The maximum adsorption capacities of 4.878 and 6.173?mg/g were obtained for modified and unmodified adsorbents, respectively, using the Langmuir model. Kinetic studies indicated that the sorption of Pb(II) ions followed a pseudo-second-order model. Thermodynamic parameters such as standard enthalpy change (ΔH°), entropy change (ΔS°), and free energy change (ΔG°) were evaluated from the sorption experimental measurements. The results showed that the sorption process of Pb(II) ions on unmodified and modified onion skins was feasible and exothermic under the conditions used in this study. The sorption process followed the mechanism of physisorption.     

傅里叶变换红外光谱鉴别正常和良恶性乳腺组织

应用傅立叶变换红外光谱及衰减全反射法, 检测乳腺手术中切除的四种新鲜离体乳腺组织77例,包括正常乳腺组织18例,乳腺增生13例,乳腺纤维腺瘤21例,乳腺癌25例. 用方差分析和秩和检验的方法比较上述四类乳腺组织红外光谱各谱带的峰位、相对峰强及半高宽结果表明：与蛋白、脂质、糖类与核酸相关的谱带在上述四种不同类型乳腺组织之间均存在高度的统计学差异（P<0.05）. 因此,应用FTIR（Fourier Transform Infrared Spectroscopy）可以区分正常乳腺组织、乳腺增生、乳腺纤维腺瘤以及乳腺癌四种乳腺组织,这将为今后在手术中运用原位在体FTIR指导外科医生进行精准手术奠定基础.