新型大尺寸透中红外氧氟化物光学玻璃研究

红外光学玻璃是很多重要军、民用系统的关键窗口材料之一,但其高性能化、大尺寸化制备面临重要挑战。针对氟化物玻璃易挥发、抗析晶性能较差等特点,通过向含TeO2的氟铝酸盐玻璃中引入碱土金属氧化物BaO,显著降低了玻璃在熔制中的挥发,同时提高了玻璃的热稳定性。通过Raman光谱的分析,发现BaO的增加抑制了富TeO2玻璃分相,有利于碲酸盐玻璃与氟铝酸盐玻璃之间的融合,促进了玻璃网络结构的稳定。所得的氧氟化物红外光学玻璃有优异的红外透射性能,和氟化钙晶体性能对比,显示出低成本优势和更强的环境适应性。     

新型红外氧氟玻璃及其雷达隐身技术

红外玻璃是很多重要军用系统的关键窗口材料之一,红外玻璃的高性能、大尺寸化制备面临重要挑战,同时红外技术和光电对抗技术的发展对红外窗口的雷达隐身性能也提出了很高的要求。阐述了新型红外玻璃的设计思想,基于此发展了一种新型的中红外光学玻璃—氟镓酸盐(FGa)玻璃,并以FGa玻璃为基质,成功研制出新型具有雷达隐身功能的中红外光功能材料。     

红外导引头整流罩技术研究

从材料选择和整流罩设计两方面,介绍了如何解决高速红外导引头整流罩问题.针对高速红外成像导引头使用环境的要求,分析了整流罩材料选择应考虑的因素.通过比较材料的透过率、硬度、抗弯强度和热膨胀等性能参数,得出尖晶石是较理想的高速导弹整流罩材料,其机械性能和光学性能良好,易于制备,并已取得成功应用;红外玻璃特别适合大尺寸和复杂形状制备.为了减小整流罩气动加热效应,分析了解决气动加热问题的途径,提出可通过镀金刚石膜、信号处理、共形设计等技术来减小影响,并简要介绍共形整流罩设计原理和制造.     

新型远红外Ge-Te-Se-Sn硫系玻璃的热学与光学性质研究

采用熔融淬冷法制备了新型远红外Te基硫系玻璃Ge20-xTe65 Se15 Snx(x=0,2,4).在Ge-Te-Se玻璃的基础上,通过引入重金属Sn,研究其对玻璃组成、结构和性能的影响.测试了样品的中红外热成像、X射线衍射(XRD)图谱、差热分析曲线(DSC)、可见/近红外吸收光谱、红外透射光谱.利用经典的Tauc...     

机载光电设备红外8～12μm光学窗口技术研究

基于机载光电设备红外窗口的性能要求，对几种8～12μm波段红外材料的性能进行了比较，分析ZnS材料作为长波红外窗口的优越性，并对两种不同工艺制备的ZnS的光学、力学和热性能进行了分析和比较，对以ZnS为基底的窗口材料的镀膜选择进行了分析．介绍了一种红外窗口厚度的确定方法，并对不同厚度及镀膜前后的ZnS样品进行了透过率的测试．     

远红外窗口聚乙烯性能研究

采用压缩模塑法制备了聚乙烯远红外窗口,对红外窗口材料的成型条件和性能进行了测试分析。结果表明,成型温度为150℃,样品的成型压力对红外透过率没有影响,窗口材料的红外透过率随厚度的增加而减小,最后选定样品厚度为2mm,在15μm以后具有较好的透过率。抗腐蚀性能测试结果表明,材料耐强酸、强碱及部分有机溶剂。     

表界面调控米级二维单晶原子制造

随着芯片尺寸不断缩小,短沟道效应、热效应日趋显著.开发全新的量子材料体系以实现高性能芯片器件应用已成为当前科技发展的迫切需求.二维材料作为一类重要的量子材料,其天然具备原子层厚度和平面结构,能够有效克服短沟道效应并兼容当代微纳加工工艺,非常有望应用于新一代高性能器件方向.与硅基芯片发展类似,二维材料芯片级器件应用必须基于高质量、大尺寸的二维单晶材料制造.然而,由于二维材料的表界面特性,现有体单晶制备技术不能完全适用于单原子层结构的二维单晶制造.因此,亟需发展新的制备策略以实现大尺寸、高质量的二维单晶原子制造.有鉴于此,本文重点综述表界面调控二维单晶大尺寸制备技术发展现状,总结梳理了米级二维单晶原子制造过程中的3个关键调控方向,即单畴生长调控、单晶衬底制备和多畴取向控制.最后,系统展望了大尺寸二维单晶在未来规模化芯片器件方向的潜在应用前景.     

RF-PECVD法制备大面积类金刚石薄膜性能的研究

采用RF-PECVD法在锗、硅红外光学窗口上制备了大面积(基底直径φ=150～250mm)类金刚石薄膜.采用拉曼光谱分析了大面积DLC膜的结构组成,对RF-PECVD法制备的大面积DLC膜的均匀性、红外光学性能、机械力学性能以及其抗恶劣环境的能力进行了检测和分析.膜层厚度均匀性在3%以内.锗、硅红外窗口双面镀制DLC膜后,极值透过率分别达92%和96%以上,可显著提高红外光学窗口的显微硬度.膜层具有极强的抗盐雾、耐海水腐蚀和抗摩擦的能力.     

Ge-Se基硫系玻璃在通信波段的三阶非线性与光谱特性研究

在Ge-Se二元体系中引入相同摩尔比的Ga, Sn, Sb, Te四种元素, 使用熔融淬冷法制备了一系列硫系玻璃. 利用吸收光谱获得了不同元素引入下硫系玻璃能带结构的变化, 并结合拉曼光谱详细研究了产生光学特性变化的微观表征. 使用Z扫描方法测试了各个硫系玻璃样品在1550 nm波长下的三阶非线性参数, 发现加入Sn的玻璃的三阶非线性折射率n₂最大, 达到了6.36×10^-17 m²/W, 且其品质因子大于23, 表明Sn引入能够增强硫系玻璃在通信波段的三阶非线性, 这一研究结果为以后的高性能红外器件的设计及制备提供了一种环保且性能优良的候选材料.     

PbI2对远红外Te基硫系玻璃光学性能的影响

用传统的熔融淬冷法制备了一系列新型Ge-Te-PbI₂硫系玻璃,并且讨论了玻璃的形成区域. 利用X射线衍射(XRD)、差热分析(DTA)、可见/近红外吸收光谱、红外透过光谱等技术,研究重金属卤化物PbI₂对Ge-Te硫系玻璃组成、结构和性能的影响. 利用Tauc方程计算了样品的直接和间接光学带隙,根据金属标准和能量带隙理论讨论了玻璃光学带隙与组分变化的关系. 结果表明:PbI₂的引入,提高了Te玻璃的形成能力,而且玻璃的热稳定性良好;随着PbI₂含量的增加,玻璃的密度和折射率均增大,光学带隙减小,短波吸收截止边发生红移,玻璃的红外截止波长基本不变,达到了25 μm. 该系列玻璃可用于制备远红外长波波导器件. 关键词： Te基玻璃 2')" href="#">PbI₂ 光学带隙 红外光谱     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.