PAMAM structure-based multifunctional fluorescent conjugates for improved fluorescent labelling of biomacromolecules

Fluorescent probes are of increasing interest in medicinal and biological applications for the elucidation of the structures and functions of healthy as well as tumour cells. The quality of these investigations is determined by the intensity of the fluorescence signal. High dye/carrier ratios give strong signals. However, these are achieved by the occupation of a high number of derivatisation sites and therefore are accompanied by strong structural alterations of the carrier. Hence, polyvalent substances containing a high number of fluorescent dyes would be favourable because they would allow the introduction of many dyes at one position of the compound to be labelled.A large number of different dyes have been investigated to determine the efficiency of coupling to a dendrimer scaffold and the fluorescence properties of the oligomeric dyes, but compounds that fulfil the requirements of both strong fluorescence signals and reactivities are rare. Herein we describe the synthesis and characterisation of dye oligomers containing dansyl-, 7-nitro-2,1,3-benzoxadiazol-4-yl- (NBD), coumarin-343, 5(6)-carboxyfluorescein and sulforhodamine B2 moieties based on polyamidoamine (PAMAM) dendrimers. The PAMAM dendrimers were synthesised by an improved protocol that yielded highly homogeneous scaffolds with up to 128 conjugation sites. When comparing the fluorescent properties of the dye oligomers it was found that only the dansylated dendrimers met the requirements of enhanced fluorescence signals. The dendrimer containing 16 fluorescent dyes was conjugated to the anti-epidermal-growth-factor receptor (EGFR) antibody hMAb425 as a model compound to show the applicability of the dye multimer compounds. This conjugate revealed a preserved immunoreactivity of 54%.We demonstrate the applicability of the dye oligomers to the efficient and applicable labelling of proteins and other large molecules that enables high dye concentrations and therefore high contrasts in fluorescence applications.     

Ionic liquids as surfactants

Problems of self-assembling in systems containing ionic liquids (ILs) are discussed. Main attention is paid to micellization in aqueous solutions of dialkylimidazolium ILs and their mixtures with classical surfactants. Literature data are reviewed, the results obtained by the authors and co-workers are presented. Thermodynamic aspects of the studies and problems of molecular-thermodynamic modeling receive special emphasis. It is shown that the aggregation behavior of dialkylimidazolium ILs is close to that of alkyltrimethylammonium salts (cationic surfactants) though ILs have a higher ability to self-organize, especially as it concerns long-range ordering. Some aspects of ILs applications are outlined where their common features with classical surfactants and definite specificity are of value.     

Arginine conjugates of metallo-supramolecular cylinders prescribe helicity and enhance DNA junction binding and cellular activity

The conjugation of arginine residues at the ends of a metallo-supramolecular triple-helical cylinder enables absolute control over the helicity of the cylinder core, and boosts the DNA junction recognition by the complexes and their activity against a cancer cell line.     

Cidofovir peptide conjugates as prodrugs

Cidofovir (HPMPC, Vistide®) is a broad-spectrum anti-viral agent that is used to treat AIDS-related CMV retinitis. Currently, cidofovir is of particular interest as a potential therapy for orthopox virus infections, including smallpox. An important limitation of cidofovir and analogous nucleotide drugs in a therapeutic role is their low oral bioavailability and poor transport into cells. In principle, bioavailability of a drug can be improved by structural modification targeting transporters expressed in human intestine. To be effective, the transported prodrug must be cleaved by endogenous enzymes to its parent compound. In this work, three examples of novel cyclic cidofovir (cHPMPC) prodrugs incorporating dipeptides were synthesized and evaluated in a rat oral bioavailability model, in which the prodrugs showed significantly enhanced transport vs. HPMPC and cHPMPC. The prodrugs inhibited Gly-Sar uptake in a competitive binding assay using DC5 cells over-expressing hPepT1.     

Porphyrin-aminoquinoline conjugates as telomerase inhibitors

A series of metalloporphyrins was prepared in order to target the G-quadruplex structure of telomeric DNA for the design of antitelomerase compounds. The initial cationic tetramethylpyridiniumyl porphyrin was modified by the replacement of one or two methylpyridiniumyl groups by one or two 4-aminoquinoline moieties, at the meso position, in order to increase the cell penetration and the quadruplex affinity. The porphyrins were either metallated by manganese or by nickel. The degradation of quadruplex DNA was assayed in vitro with the manganese redox-active derivatives. All porphyrins complexes were capable of inhibiting the telomerase enzyme with IC50 values in the micromolar range (TRAP assay).     

Effect of surfactants on the chemiluminescence of acridinium dimethylphenyl ester labels and their conjugates

Chemiluminescent acridinium dimethylphenyl esters, containing two methyl groups flanking the phenolic ester bond, display excellent chemiluminescence stability and are used as labels in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered with alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride. Under these conditions, light emission is rapid and is complete in <5 s. In the present study we examined the effect of various surfactants on light emission from acridinium dimethylphenyl ester labels and their conjugates containing hydrophilic linkers derived either from hexa(ethylene)glycol or a sulfobetaine zwitterion. Sulfobetaine zwitterions are very polar and incorporation of these functional groups in acridinium dimethyphenyl esters and their conjugates represents a new approach to improving the aqueous solubility of these chemiluminescent labels. Our results indicate that in general, surfactants affect light emission from these labels and their conjugates by two discrete mechanisms. Cationic surfactants, but not anionic or non-ionic surfactants, accelerate overall light emission kinetics and a more modest effect is observed with zwitterionic surfactants. Surfactants also enhance total light output and the magnitude of this enhancement is maximal for cationic surfactants and a sulfobetaine zwitterionic surfactant. These observations are the first to clearly delineate the role of the surfactant on the chemiluminescence reaction pathway of acridinium esters and can be rationalized based on known effects of surfactant aggregates on bimolecular and unimolecular reactions.     

Formulation and characterization of a biocompatible microemulsion composed of mixed surfactants: lecithin and Triton X-100

We report on the formation and characterization of a biocompatible microemulsion (ME) system composed of lecithin (L), Triton X-100 (T) as the surfactant(s), butyl lactate (BL) as the cosurfactant, and isopropyl myristate (IPM) as the oil phase and water. Detailed phase construction reveals that mixing of surfactants (L and T) produces larger single-phase ME region compared to L. In the mixed surfactant systems, a three-phase body appears which is otherwise not obtained in the single surfactant counterparts signifying the synergistic solubilization behaviour upon mixing. The maximum solubilization capacity decreases as the content of T increases in the mixture. Viscosity, conductance and adiabatic compressibility measurements of the single-phase ME systems at a constant amphiphile concentration (80 % w/w) show a linear trend with increasing water content revealing a droplet-type structure of all the studied formulations. FTIR studies in the water-in-oil (w/o) region identify the presence of three distinct types of water molecules in these systems and their relative content changes with the interfacial composition as well as the total water content in the system. Our study offers a biocompatible mixed ME system in which the physical properties do not differ much from those of the lecithin-based systems with the additional advantage of having higher solubilization capacity, low pH dependency and low viscosity, which renders its potential to be used for specific pharmaceutical applications.     

60]Fullerene-based monolayers as neuroprotective biocompatible hybrid materials

Here we report on the surface immobilization of redox-active [60]fullerene derivatives and the consequent neuroprotective effects toward l-glutamate induced excitotoxicity in human derived undifferentiated neuroblastoma cells.     

Neamine-heterocycle conjugates as potential anti-HIV agents

A series of neamine-heterocycle conjugates were designed and synthesized. All new compounds displayed more potent inhibitory effect on HIV replication than neamine, among them two compounds displayed stronger anti-HIV activity than neomycin B. The results suggested that itmight be a promising approach to modify neamine for the discovery of new anti-HIV agents.     

Iminosugar-ferrocene conjugates as potential anticancer agents

We prepared a series of new iminosugar-ferrocene hybrids displaying potent inhibition of fucosidase (bovine kidney) and inactivation of MDA-MB-231 breast cancer cells proliferation at low micromolar concentrations. The synthetic route brought to light an unprecedented isomerisation of a 2-ethanalylpyrrolidine.     

Silver coordination complexes as room-temperature multifunctional materials

A series of bischelate ionic silver complexes [Ag(L*)(2)][X] was prepared by complexation of a newly synthesized 2,2'-bipyridine containing chiral alkoxy chains in the 4,4' positions. The appropriate choice of the construction motifs allows the preparation of new materials in which several functionalities can be introduced. Indeed, when the anion X(-) is a triflate or a dodecylsulfate group, the right combination of intermolecular interactions promotes the production of liquid crystalline mesophases. Therefore, the presence of coordinating anions, which drives the supramolecular assembly, is essential to generate, at the same time, room-temperature columnar hexagonal mesomorphism, the columnar helical supramolecular structure, and excimeric emission.     

Donor-and-acceptor substituted truxenes as multifunctional fluorescent probes

A series of dimesitylboryl acceptor (mesityl=2,4,6-trimethylphenyl) and/or diphenylamino donor (-N(Ph)2)-substituted truxene derivatives, classified as D-or-A substituted compounds and D-and-A substituted charge-transfer compounds, have been synthesized. Two D-and-A substituted truxene compounds, namely, 2-dimesitylboryl-7,12-di(N,N-diphenylamino)-5,5',10,10',15,15'-hexaethyltruxene (BN2) and 2,7-di(dimesitylboryl)-12-(N,N-diphenylamino)-5,5',10,10',15,15'-hexaethyltruxene (B2N), exhibit extraordinarily large solvatochromism ranging from 420 nm (in hexane) to 580 nm (in acetonitrile) in aprotic solvents, which can be used to probe the polarity of the solution environment. Due to proton-donor interactions, the solvatochromic red shift of BN2 and B2N in protic solvents has been significantly decreased, and this effect can be used to identify local protic and aprotic environment. Furthermore, because of the interaction between F- and acceptor, BN2 and B2N show sharp spectral response to fluoride ion concentration. The simultaneous "turn-off" at 500 nm and "turn-on" at 380 nm of the fluorescence signal have provided a good example of a fluorescent ratiometric method, which can greatly enhance the sensitivity of the fluoride ion probe. Underlying these interesting spectral phenomena and multifunctional probe properties is the charge-transfer strategy of grafting donor and acceptor moieties, as A-pi-D2 or A2-pi-D style, to the triangular truxene.     

Dipeptide and tripeptide conjugates as low-molecular-weight hydrogelators

Dipeptide and tripeptide conjugates are receiving significant current interest as LMWG, driven by the accessibility of these materials, their relatively low cost and also the large number of examples that successfully form hydrogels. Their behaviour can easily modified by changes in the amino acids or the aromatic end groups chosen. The assembly process has been relatively well described for a small subset of these gelators, giving a good idea of the behaviour of these molecules and allowing an understanding of the conditions under which assembly will occur. Here, we critically review the literature in this area and consider the importance of gelator choice and method of assembly on the outcome of the gelation. We also discuss the applications of these hydrogels.     

Microbubble-sonosensitiser conjugates as therapeutics in sonodynamic therapy

A Rose Bengal sonosensitiser has been covalently attached to a lipid microbubble and the resulting conjugate shown to produce higher levels of singlet oxygen, enhanced cytotoxicity in a cancer cell line and a greater reduction in tumour growth than the sonosensitiser alone.     

Plant-derived surfactants as an alternative to synthetic surfactants: surface and antioxidant activities

Biosurfactants have great advantages as an eco-friendly alternative to synthetic surfactants. Surface active properties and antioxidant activity of extracts prepared from Sapindus mukorossi, Verbascum densiflorum, Equisetum arvense, Betula pendula and Bellis perennis have been studied. The extract from Sapindus mukorossi served as a standard because it belongs to the most widely used natural surfactants. The surface active properties of these nonionic surfactants were also compared with the properties of common synthetic surfactants such as sodium lauryl sulfate (SLS) and Tween® 80. In many cases, the plant-derived surfactants showed better properties than the synthetic ones, e.g. minimum critical micelle concentration values were observed for E. arvense (0.033 g L^?1), B. perennis (0.076 g L^?1), or minimum surface tension reached for the extract of B. perennis (36.8 mN m^?1).     

Arginine as an effective additive in gel permeation chromatography

A major problem in gel permeation chromatography (GPC) or size exclusion chromatography is non-specific binding of applied proteins to the column matrix (stationary phase). We have tested an aqueous arginine solution as the GPC mobile phase on silica-based and polymer-based columns, using mouse monoclonal antibody and recombinant human activin, interleukin-6, basic fibroblast growth factor, and interferon-gamma as model proteins. We observed that addition of arginine to the mobile phase improves separation of the proteins and their soluble aggregates from the GPC columns, which suggests that arginine is an effective additive for the GPC mobile phase.     

C12 hydroxyester ethoxylates as nonionic surfactants

A series of ethoxylates of 2,2,4-trimethyl-1,3-pentanediol mono-isobutyrate representing a synthetic C12 hydroxyester hydrophobe was obtained. The solubility parameters, surface tension and critical micelle concentrations for model solutions were investigated. The new surfactants were found to produce extremely low foam levels and a non-standard surface interfacial behavior was determined. It was observed that the ethoxylates of the C12 hydroxyester formed an oriented monolayer at the interface regardless of their average polyaddition degree. Such behavior is different from the surface activities of commonly known linear nonionic surfactants and it indicates self organization of the surfactants at the interface. This feature offers possibility for application of these surfactants in nanotechnology as well as in the conventional cleaning processes.     

Nonionic ortho ester surfactants as cleavable emulsifiers

Acid labile surfactants containing an ortho ester link are used as emulsifiers for an aliphatic oil, squalane. The emulsions were made in the presence of a cationic polymer, either polyamine or the corresponding hydrophobically modified polyamine. Spontaneous hydrolysis of the surfactant resulted in emulsions stabilized by polymer together with degradation products from the surfactant. The effect of breakdown of the surfactant on the emulsion was evaluated by means of droplet size measurements and kinetic stability. One linear and one branched nonionic ortho ester surfactant with the same number of oxyethylene units were characterized and used for the purpose. The ortho ester surfactants are complex mixtures of components, ranging from very hydrophilic to very hydrophobic species. The chemical shift of the central methine proton in the ortho ester link is extremely sensitive to the substitution pattern and it was possible to identify by (1)H NMR the components that make up the surfactants, as has been reported earlier. The change in emulsion stability, the change in droplet size and the rate of surfactant hydrolysis were studied at acidic pH at room temperature. Both gas chromatography and (1)H NMR were used in order to monitor the surfactant degradation. The presence of a polymer gave a more sluggish breakdown of the surfactants, probably due to hydrophobic shielding by the polymer. There was a good correlation between increase of droplet size and degree of surfactant decomposition.     

Biomimetic multifunctional porous chalcogels as solar fuel catalysts

Biological systems that can capture and store solar energy are rich in a variety of chemical functionalities, incorporating light-harvesting components, electron-transfer cofactors, and redox-active catalysts into one supramolecule. Any artificial mimic of such systems designed for solar fuels production will require the integration of complex subunits into a larger architecture. We present porous chalcogenide frameworks that can contain both immobilized redox-active Fe(4)S(4) clusters and light-harvesting photoredox dye molecules in close proximity. These multifunctional gels are shown to electrocatalytically reduce protons and carbon disulfide. In addition, incorporation of a photoredox agent into the chalcogels is shown to photochemically produce hydrogen. The gels have a high degree of synthetic flexibility, which should allow for a wide range of light-driven processes relevant to the production of solar fuels.