Synthesis and characterization of new poly(ester-amide)s containing diarylidenecyclohexanone in the main chain. Part: II

A new category of poly(ester-amide)s based on diarylidenecyclohexanone in the main chain were synthesized via interfacial polycondensation of two monomers namely: 2,6-bis(4-hydroxybenzylidene) cyclohexanone I and 2,6-bis(4-hydroxy-3-methoxybenzylidene) cyclohexanone II with diacid chlorides IIIa–c. The model compounds were synthesized by reacting one mole of compounds IVa–c with two monomers I and II. The structure of the model compounds was confirmed by correct elemental and spectral analyses. The various characteristics of the resulting polymers including: solubility, viscosity, thermal analysis, and X-ray diffraction analysis were determined and discussed. The majority of the polymers were insoluble in most common organic solvents. The viscosity measurements in dimethylsulfoxide showed the values 0.58–0.79 dl/g. Thermal analysis showed that they were thermally stable up to 500 °C. X-ray analysis showed that the polymers had some degree of crystallinity in the region 2θ = 5–50°.     

Investigation of steam reforming of acetic acid to hydrogen over Ni–Co metal catalyst

Catalytic generation of hydrogen by steam reforming of acetic acid over a series of Ni–Co catalysts have been studied. The catalyst with the molar ratio of 0.25:1 between Ni and Co was superior to other catalysts. The effects of reaction temperature, liquid hourly space velocity (LHSV) and molar ratios of steam-to-carbon (S/C) were studied in detail over this catalyst. At T = 673 K, LHSV = 5.1 h⁻¹, S/C = 7.5:1, the catalyst exhibited the best performances. Acetic acid was converted completely to hydrogen, while H₂ selectivity reached up to 96.3% and CO₂ selectivity up to 98.1% was obtained, respectively. Ni–Co catalyst showed rather stable performances for the 70 h time-on-stream without any deactivation.     

Electron beam irradiation of fluoropolymers containing polyethers

A highly fluorinated monomer, 1,3-bis(1,1,1,3,3,3-hexafluoro-2-pentafluorophenyl methoxy-2-propyl)benzene (12F-FBE) was polymerized with some diphenols by polycondensation and then was electron beam irradiated between 100 and 1000 kGy to determine degradation radiochemistry yield (G_s) by gel permeation chromatography (GPC). The samples were characterized after irradiation by DSC, FTIR, and nuclear magnetic resonance (NMR). The fluoropolymers show apparent degradation in mechanical properties at 300 kGy, except 12F-FBE polymerized with biphenol and bisphenol A, when they did not show any apparent physical change up to 300 kGy; and continue to be flexible and transparent, with a radiochemical yield scission (G_s) of 0.75, 0.53, 0.88, and 0.38 for 12F-FBE/SDL aliphatic, 12F-FBE/biphenol, 12F-FBE/bisphenol A, and 12F-FBE/bisphenol O, respectively. The number average molecular weights for three of the polymers decrease upon 1000 kGy irradiation to 10% of their original values; however, the polymer from bisphenol A is much more stable and its M_n decreases to only 24% of original.     

Hole-transporting glass-forming indolo[3,2-b]carbazole-based diepoxy monomer and polymers

Hole-transporting indolo[3,2-b]carbazole-based diepoxy monomer and polymers are reported. The polymers were prepared by polyaddition reaction of indolo[3,2-b]carbazole diepoxide with aromatic dithiols in the presence of triethylamine. Their number average molecular weights range from 11500 to 14310 and polydispersity indices are in the range of 2.96–3.08. Thermal, optical, photophysical, electrochemical and photoelectrical properties of the title compounds were studied. Both the monomer, 5,11-di-2,3-epoxypropyl-6-pentyl-5,11-dihydroindolo[3,2-b]carbazole and the polymers were found to form glasses with the glass transition temperatures ranging from 37 °C for the monomer to 99 °C for one of the polymers. Time-of-flight hole drift mobilities observed in the solid amorphous films of the monomer exceeded 10^?4 cm² V^?1 s^?1 at an electric field of 10⁶ V cm^?1.     

Enhanced electrochemical capacitance of nitrogen-doped carbon gels synthesized by microwave-assisted polymerization of resorcinol and formaldehyde

Nitrogen-doped carbon gels were synthesized by ammonia-assisted carbonization of resorcinol–formaldehyde (RF) polymers obtained under microwave irradiation without any basic catalyst. Compared with the RF polymer synthesized by the conventional hydrothermal method, microwave polymerization produced spherical beads with a higher surface area (1710 m²/g vs. 1080 m²/g), and smaller (∼700 nm vs. ∼5 μm) but more uniform bead sizes. The majority of their pores were micropores. As a result, the electrochemical capacitance of microwave-assisted nitrogen-doped carbons was significantly higher than that of materials prepared by the conventional hydrothermal method. Thus microwave-assisted polymerization followed by ammonia-assisted carbonization is a useful method to synthesize nitrogen-doped carbon gels for electrochemical double layer capacitors.     

Li/LiFePO4 batteries with room temperature ionic liquid as electrolyte

Room temperature ionic liquid (RTIL) was prepared on basis of N-methyl-N-butylpiperidinium bis(trifluoromethanesulfonyl)imide (PP₁₄TFSI), which showed a wide electrochemical window (?0.1–5.2 V vs. Li⁺/Li) and is theoretically feasible as an electrolyte for batteries with metallic Li as anodes. The addition of vinylene carbonate (VC) improved the compatibility of PP₁₄TFSI-based electrolyte towards lithium anodes and enhanced the formation of solid electrolyte interphase film to protect lithium anodes from corrosion. Accordingly, Li/LiFePO₄ cells initially delivered a discharge capacity of about 127 mAh g^?1 at a current density of 17 mA g^?1 in the ionic liquid with the addition of VC and showed better cyclability than in the neat ionic liquid. Electrochemical impedance spectroscopy disclosed that the addition of VC enhanced Li-ion diffusion and depressed interfacial resistance significantly.     

Determination of triclosan,triclocarban and methyl-triclosan in aqueous samples by dispersive liquid–liquid microextraction combined with rapid liquid chromatography

In this study, dispersive liquid–liquid microextraction (DLLME) combined with ultra-high-pressure liquid chromatography (UHPLC)–tunable ultraviolet detection (TUV), has been developed for pre-concentration and determination of triclosan (TCS), triclocarban (TCC) and methyl-triclosan (M-TCS) in aqueous samples. The key factors, including the kind and volume of extraction solvent and dispersive solvent, extraction time, salt effect and pH, which probably affect the extraction efficiencies were examined and optimized. Under the optimum conditions, linearity of the method was observed in the range of 0.0500–100 μg L^?1 for TCS, 0.0250–50.0 μg L^?1 for TCC, and 0.500–100 μg L^?1 for M-TCS, respectively, with correlation coefficients (r²) > 0.9945. The limits of detection (LODs) ranged from 45.1 to 236 ng L^?1. TCS in domestic waters was detected with the concentration of 2.08 μg L^?1. The spiked recoveries of three target compounds in river water, irrigating water, reclaimed water and domestic water samples were achieved in the range of 96.4–121%, 64.3–84.9%, 77.2–115% and 75.5–106%, respectively. As a result, this method can be successfully applied for the rapid and convenient determination of TCS, TCC and M-TCS in real water samples.     

Synthesis,characterization and thermal studies of new polyhydrazides and its poly-1,3,4-oxadiazoles based on dihydro-9,10-ethanoanthracene in the main chain

New interesting class of new polyhydrazides having inherent viscosities in the range 0.45–0.71 dI/g were prepared by polymerizing a series of diacid chlorides, e.g., sebacoyl, isophthaloyl or terphthaloyl with 9,10-dihydro-9,10-ethanoanthracene-11,12-dihydrazide I in polar aprotic solvent and by the low-temperature polycondensation technique. In order to characterize the polymers, a model compound II was synthesized from I and benzoyl chloride. All the hydrazide polymers are semi crystalline in nature and are readily soluble in various polar solvents such as N-methyl pyrrolidine (NMP) and dimethylsulfoxide (DMSO). Their T_gs were recorded in the range of 78–95 °C and could be thermally dehydrated into the corresponding polyoxadiazoles in the region of 310–20 °C, as evidenced by the DTA thermograms. The oxadiazole polymers showed a dramatically decreased in solubility and higher T_g when compared to their respective hydrazide prepolymers. The morphology of polyhydrazide V was examined by SEM.     

Preparation of aqueous crosslinked dispersions of functionalized poly(d,l-lactic acid) with a thermomechanical method

Aqueous crosslinked microparticle dispersions were prepared from a copolymer of d,l-lactic acid, 1,4-butanediol, and itaconic acid with a thermomechanical method. The copolymer was prepared in one step polycondensation reaction using Sn(Oct)₂ as a catalyst. A polymer with M_n of 2800 g mol^?1 and a molecular weight distribution of 1.41 was obtained (as determined by SEC), that contained double bonds introduced by the itaconic acid monomer units (6 mol-%, as determined by NMR). Crosslinking ability of the prepared copolymer was demonstrated in bulk by adding a thermal initiator and altering amounts of ethylene glycol dimethacrylate (EGDMA) crosslinking agent into molten polymer at 60–150 °C. A crosslinked gel was formed in less than 15 min at 80 °C when 10 wt.% of EGDMA was added and benzoyl peroxide (BPO) was used as the initiator. Aqueous dispersions were prepared of the non-crosslinked copolymer with a thermomechanical method that involved slow addition of aqueous polyvinyl alcohol (PVA) solution into molten copolymer at 60 °C under shear. Dispersions were prepared with 10 wt.% of EGDMA and 2 wt.% of BPO. Crosslinking of the dispersed microparticles was achieved by heating the dispersions at 80 °C for 30 or 60 min. The dispersions were characterized by SEM, DSC, TGA, FT-IR, solid state NMR, and gel content measurements. The effect of crosslinking was clearly seen in SEM images of films cast from the dispersions. The films cast from non-crosslinked dispersions had smooth morphology whereas in films cast from crosslinked dispersions separate spherical particles were observed. During the crosslinking reactions, glass transition temperatures increased (as determined by DSC), thermal stability of the samples increased (as determined by TGA), and the gel content of the samples increased.     

Cyanamide-derived non-precious metal catalyst for oxygen reduction

Cyanamide was used in the preparation series of metal–nitrogen–carbon (M–N–C) oxygen reduction catalysts. The best catalyst, treated at 1050 °C, shows good performance versus previously reported non-precious metal catalysts with an OCV ~ 1.0 V and a current density of 105 mA/cm² (iR-corrected) at 0.80 V in H₂/O₂ fuel cell testing (catalyst loading: 4 mg cm^? 2). Although nitrogen content has been previously correlated positively with ORR activity, no such trend is observed here for any nitrogen type. The combined effects of nitrogen and sulfur incorporation into the carbon may account for the high activity of the 1050 °C catalyst.     

Sensitive liquid chromatography–tandem mass spectrometry method for the determination of pantoprazole sodium in human urine

A sensitive and selective liquid chromatographic–tandem mass spectrometric (LC–MS–MS) method was developed to determine pantoprazole sodium (PNT) in human urine. After solid-phase extraction with SPE cartridge, the urine sample was analysed on a C₁₈ column (symmetry 3.5 μm; 75 mm × 4.6 mm i.d) interfaced with a triple quadrupole tandem mass spectrometer. Positive electrospray ionization was employed as the ionization source. The mobile phase consisted of acetonitrile–water (90:10, v/v). The method was linear over a concentration range of 1–100 ng mL^?1. The lower limit of quantitation was 1 ng mL^?1. The intra-day and inter-day relative standard deviation across three validation runs over the entire concentration range was <10.5%. The accuracy determined at three concentrations (8.0, 50.0 and 85.0 ng mL^?1 PNT) was within ±1.25% in terms of relative errors.     

Synthesis and physical characterization of electrically conducting polymers of polynuclear aromatic sulfonyl compounds

Potentially useful conducting polymers of sulfonyl substituted phenanthrene derivatives and non-conducting linear polymers, such as, polystyrene and poly(N-vinylcarbazole) have been synthesized and characterized using IR, thermogravimetric and dielectric measurements. The phenanthrene-based benzene, naphthalene and biphenyl copolysulfones have also been prepared and characterized through these techniques. These pendant and backbone polymer sulfones have exceptionally high thermal stability and electrical conductivity, such that dc conductivity in the range 2.80 × 10^?16 to 2.82 × 10^?7 Ω^?1 cm^?1 and ac conductivity in the range 1.69 × 10^?7 to 2.10 × 10^?6 Ω^?1 cm^?1.     

Cubic-BN nanocrystals synthesis by pulsed laser induced liquid–solid interfacial reaction

Cubic boron nitride (c-BN) nanocrystals have been synthesized by pulsed laser induced liquid–solid interfacial reaction. It is shown that the diameters of the prepared quasi-spherical c-BN nanocrystals vary from 30 to 80 nm via transmission electron microscopy (TEM). The 2θ values of the X-ray diffraction (XRD) peaks of the resultant c-BN nanocrystals are 43.16°, 74.16°, 90.08° and 136.1°, respectively, corresponding to the (1 1 1), (2 2 0), (3 1 1) and (3 3 1) crystalline planes of a c-BN phase. Fourier transform infrared (FTIR) spectroscopy has also been used to characterize the structure of boron nitride. The formation of c-BN nanocrystals upon pulsed laser ablation at the liquid–solid interface is discussed in detail.     

Investigation of the Pt–Ni–Pb/C ternary alloy catalysts for methanol electrooxidation

This research is aimed to increase the activity of anodic catalysts and thus to lower noble metal loading in anodes for methanol electrooxidation. The Pt–Ni–Pb/C catalysts with different molar compositions were prepared. Their performance were tested by using a glassy carbon disk electrode through cyclic voltammetric curves in a solution of 0.5 mol L⁻¹ CH₃OH and 0.5 mol L⁻¹ H₂SO₄. The performances of Pt–Ni–Pb/C catalyst with optimum composition (the molar ratio of Pt/Ni/Pb is 5:4:1) and Pt/C (E-Tek) were also compared. Their particle sizes and structures were determined by means of X-ray diffraction (XRD). The XRD results show, compared with that of Pt/C, the lattice parameter of Pt–Ni–Pb (5:4:1)/C catalyst decreases, its diffraction peaks are shifted slightly to a higher 2θ values. This indicates the formation of an alloy involving the incorporation of Ni and Pb atoms into the fcc structure of Pt. The electrochemical measurement shows the activity of Pt–Ni–Pb/C catalyst with an atomic ratio of 5:4:1 for methanol electrooxidation is the best among all different compositions. The activity of Pt–Ni–Pb (5:4:1)/C catalyst is much higher than that of Pt/C (E-Tek).     

Ultra-preconcentration and determination of thirteen organophosphorus pesticides in water samples using solid-phase extraction followed by dispersive liquid–liquid microextraction and gas chromatography with flame photometric detection

An ultra-preconcentration technique composed of solid-phase extraction (SPE) and dispersive liquid–liquid microextraction (DLLME) coupled with gas chromatography–flame photometric detection (GC–FPD) was used for determination of thirteen organophosphorus pesticides (OPPs) including phorate, diazinon, disolfotane, methyl parathion, sumithion, chlorpyrifos, malathion, fenthion, profenphose, ethion, phosalone, azinphose-methyl and co-ral in aqueous samples. The analytes were collected from large volumes of aqueous solutions (100 mL) into 100 mg of a SPE C₁₈ sorbent. The effective variables of SPE including type and volume of elution solvent, volume and flow rate of sample solution, and salt concentration were investigated and optimized. Acetone was selected as eluent in SPE and disperser solvent in DLLME and chlorobenzene was used as extraction solvent. Under the optimal conditions, the enrichment factors were between 15,160 and 21,000 and extraction recoveries were 75.8–105.0%. The linear range was 1–10,000 ng L^?1 and limits of detection (LODs) were between 0.2 and 1.5 ng L^?1. The relative standard deviations (RSDs) for 50 ng L^?1 of OPPs in water with and without an internal standard, were in the range of 1.4–7.9% (n = 5) and 4.0–11.6%, respectively. The relative recoveries of OPPs from well and farm water sat spiking levels of 25 and 250 ng L^?1 were 88–109%.     

Radiation induced in-situ generation of conductivity in the blends of polyaniline-base with chlorinated-polyisoprene

Radiation induced acid doping of PANI to generate electrical conductivity was achieved by radiation induced HCl release from chlorinated-polyisoprene (ClPIP). Blends of PANI with ClPIP were prepared by mechanical mixing/grinding in the composition range of 9–43% ClPIP by weight and pelletized under 10 t press. The pellets were irradiated in ⁶⁰Co Gammacell in air at room temperature to doses up to 300 kGy. The maximum electrical conductivity increase was observed for the blend PANI43 which changed from 10^?10 to 10^?4 S cm^?1 when it was irradiated to 300 kGy dose. Radiation induced changes on the blends were also studied by UV–vis spectroscopy using reflection technique and FTIR spectroscopy. The broad absorption band in the visible range (630 nm) increased by increasing irradiation dose. The band (1110 cm^?1) in the IR spectra which is indicative of conductivity showed linear correlation with irradiation dose.     

Separation of benzene/cyclohexane mixtures using polyurethane–silica hybrid membranes

Mixed sols were prepared by dissolving polyurethane (a 30 wt% solution in n-propanol, PU) and tetraethylorthosilicate (TEOS) in ethanol at PU:TEOS mass ratios of 1:2, 1:1, 2:1 and 3:1. Each of the sols was coated on a porous α-alumina support tube by the dipping method, and green membranes were heat-treated at 200°C for 1 h in an atmosphere of nitrogen. A PU membrane was also prepared with PU alone. The membranes were 5–6 μm thick. The polyurethane–silica membranes were swollen in benzene but only slightly in cyclohexane at room temperature. The degree of swelling in benzene decreased with increasing fractions of TEOS in the hybrid sols. The selectivity of benzene to cyclohexane was improved due to the suppression of swelling as a result of hybridization with TEOS. The total permeation flux and benzene/cyclohexane selectivity in the membrane prepared with a sol of PU:TEOS=1:1 were 3×10⁻⁵ kg m⁻² s⁻¹ and 19, respectively.     

Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide

A task-specific ionic liquid as an environmentally eco-friendly green catalyst has been synthesized and used in the ring opening of epoxides under green conditions. In order to use protic ionic liquids (PIL), we decided to synthesize 1,2-azidoalcohols via a ring opening reaction of epoxides with 1-hydrogen-3-methylimidazolium azide ([Hmim]N₃), which actually acts as a solvent, a reagent and an activator of the epoxide ring. The reaction was carried out in short times (50–70 min) at 70 °C to give 1,2-azidoalcohol in 80–94% isolated yields.     

[Cu(bpdo)2·2H2O]2+-supported SBA-15 nanocatalyst for efficient one-pot synthesis of benzoxanthenone and benzochromene derivatives

A novel [Cu(bpdo)₂·2H₂O]²⁺-supported SBA-15 catalyst (bpdo = 2,2′-bipyridine,1,1′-dioxide) was prepared by the impregnation method. The catalyst was characterized by XRD, TEM, and BET nitrogen adsorption–desorption method, FT-IR, UV–vis, and chemical analysis. XRD patterns and TEM analysis of [Cu(bpdo)₂·2H₂O]²⁺/SBA-15 showed highly ordered hexagonal mesoporous silica, even after immobilization. Also, nitrogen adsorption–desorption isotherms exhibited type-IV isotherms and H1 hysteresis loops according to the IUPAC classification of mesoporous materials. This green support was tested for the synthesis of benzoxanthenone and benzochromene derivatives under solvent-free conditions, with high yield of products via a simple experimental and work-up procedure.     

Interfacial tensions of binary mixtures of ethanol with octane,decane, dodecane,and tetradecane

This contribution is devoted to the experimental characterization of interfacial tensions of a representative group of binary mixtures pertaining to the (ethanol + linear hydrocarbon) series (i.e. octane, decane, dodecane, and tetradecane). Experimental measurements were isothermically performed using a maximum differential bubble pressure technique, which was applied over the whole mole fraction range and over the temperature range 298.15 K < T/K < 318.15 K.Experimental results show that the interfacial tensions of (ethanol + octane or decane) negatively deviate from the linear behavior and that sharp minimum points on concentration, or aneotropes, are observed for each isotherm. The interfacial tensions of (ethanol + dodecane or tetradecane), in turn, are characterized by combined deviations from the linear behavior, and inflecting behavior observed on concentration for each isotherm. The experimental evidence also shows that these latter mixtures are close to exhibit aneotropy.For the case of (ethanol + octane or decane) mixtures, aneotropy was clearly induced by the similarity of the interfacial tension values of the constituents. The inflecting behavior of the interfacial tensions of (ethanol + dodecane or tetradecane), in turn, was observed in the vicinity of the coordinates of the critical point of these mixtures, thus pointing to the fact that the quasi-aneotropic singularity that affects these mixtures was provoked by the proximity of an immiscibility gap of the liquid phase.Finally, the experimental data of interfacial tensions were smoothed with the Scott–Myers expansion, from which it is possible to conclude that the observed aneotropic concentrations weakly depend on temperature for all the analyzed mixtures.