A modeling study by response surface methodology (RSM) on Th(IV) adsorption optimization using a sulfated β-cyclodextrin inclusion complex

Research on Chemical Intermediates - The inclusion complex (sulfated-β-CD@NAA) of sulfated β-cyclodextrin and α-naphthylacetic acid was synthesized for adsorption of low...     

Adsorption of thorium(IV) from aqueous solutions by poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres

Journal of Radioanalytical and Nuclear Chemistry - Poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres (PZA) was based on hexachlorocyclotriphosphazene (HCCP) and...     

Sequestration of naphthenic acids from aqueous solution using β-cyclodextrin-based polyurethanes

The sorption characteristics of naphthenic acids (NAs) in their anion form with β-cyclodextrin (β-CD) based polyurethanes, as sorbents, from aqueous solutions that simulate the conditions of oil sands process water (OSPW) are presented. The copolymer sorbents were synthesized at various β-CD:diisocyanate monomer mole ratios (e.g., 1:1, 1:2, and 1:3) with diisocyanates of variable molecular size and degree of unsaturation. The equilibrium sorption properties of the copolymer sorbents were characterized using sorption isotherms in aqueous solution at pH 9.00 with electrospray ionization mass spectrometry to monitor the equilibrium unbound fraction of anionic NAs in the aqueous phase. The copolymer sorbents were characterized in the solid state using (13)C CP-MAS NMR spectroscopy, IR spectroscopy and elemental analysis. The sorption results of the copolymer sorbents with anion forms of NAs in solution were compared with a commercially available carbonaceous standard: granular activated carbon (GAC). The monolayer sorption capacities of the sorbents (Q(m)) were obtained from either the Langmuir or the Sips isotherm model used to characterize the sorption characteristics of each copolymer sorbent. The estimated sorption capacity for GAC was 142 mg NAs per g sorbent whereas the polymeric materials ranged from 0-75 mg NAs per g sorbent over the experimental conditions investigated. In general, significant differences in the sorption capacities between GAC and the copolymer sorbents were related to the differences in the accessible surface areas and pore structure characteristics of the sorbents. The Sips parameter (K(eq)) for GAC and the copolymer materials reveal differences in the relative binding affinity of NAs to the sorbent framework in accordance with the synthetic ratios and the value of Q(m). The diisocyanate linker plays a secondary role in the sorption mechanism, whereas the β-CD macrocycle in the copolymer framework is the main sorption site for NAs because of the formation of inclusion complexes with β-CD.     

Solubilization of cholesterol in aqueous solution by two β-cyclodextrin dimers and a negatively charged β-cyclodextrin derivative

Two βCD dimers (linked by succinic acid, 2, or ethylenediaminetetraacetic acid, EDTA, 3, bridges) and a negatively charged monomer derivative of βCD, 1, have been synthesized and their ability to solubilize cholesterol in aqueous solution was studied. The three compounds exhibit a great capacity in solubilizing cholesterol as, for instance, concentrations up to 6 mM of cholesterol were measured in the presence of 25 mM of 3. The phase-solubility diagrams of the two dimers exhibit A _L type profiles while the monomer 1 follows an A _P isotherm. The cholesterol/dimer complexes have 1:1 stoicheiometries while monomer 1 forms two complexes with molar ratios of 1:1 and 1:2 (cholesterol/1). The equilibrium constants are K _1:1 = (5.9 ± 0.3) × 10⁴ M^?1 and K _1:1 = (8.8 ± 0.2) × 10⁴ M^?1 for 2 and 3, respectively, and K _1:1 = 73 ± 19 M^?1 and K _1:2 = 204 ± 65 M^?1 for 1. The comparison of K _1:1(3) with the product K _1:1 × K _1:2 (1) reveals that a chelate effect in binding the cholesterol by 3 exists. The structure of the cholesterol/3 complex was studied by ROESY experiments and by molecular dynamics simulations.     

Complexation of β-cyclodextrin with carborane derivatives in aqueous solution

β-Cyclodextrin formed the most robust complexes with o-carboranols 1b and 1c in aqueous solution, and the association constants estimated from NMR titration studies indicated K_a >1 × 10⁶ M⁻¹ and K_a = 6 × 10⁵ M⁻¹, respectively.     

Different self-assembly behaviors of mono-modified β-cyclodextrin substituted by benzoic acid derivatives

The mono-modified β-cyclodextrin derivative,6-O-(4-aminobenzoyl)-β-cyclodextrin(1) ,was synthesized and characterized. We compared its self-assembling behavior with structurally related β-cyclodextrin derivative,6-O-(4-hydroxybenzoyl)-βcyclodextrin(2) ,in aqueous solution and in the solid state using NMR spectroscopy and single crystal X-ray structure analysis. The two complexes displayed different self-assembling behaviors.Complex 1 formed a head-to-tail helical columnar superstructure in which the substit...     

Interaction of thorium(IV) with nitrate in aqueous solution: medium effect or weak complexation?

Microcalorimetric titrations were performed to study the Th(IV)/nitrate interaction in aqueous solution. The results show the formation of a weak mononuclear complex of Th(IV) with nitrate and allow the determination of the complexation thermodynamic parameters at 298 K and ionic strength 1.0 mol dm(-3). The reaction is endothermic and entropy driven. Data and comparison with similar actinide(IV) complexes allow to confirm the inner-sphere nature of the Th(NO(3))(3+) complex.     

Adsorption of lead(II) from aqueous solution onto several types of activated carbon fibers

In this work, the adsorption of Pb(II) from aqueous solution was investigated on various types of activated carbon fibers (ACFs) manufactured from polyacrylonitrile and phenolic resin. The textural and physicochemical properties of the ACFs were determined by the N₂-BET method and acid-base titration. The experimental adsorption equilibrium data of Pb(II) on the ACFs were obtained in a batch adsorber, and the Langmuir isotherm model better fitted the experimental data. The effects of the type of ACF and precursor of ACF, solution pH and temperature upon the adsorption of Pb(II) on the ACFs were examined in detail. The adsorption capacity was highly dependent upon the precursor of ACF. The Pb(II) adsorption capacity of the ACFs augmented when the solution pH and temperature were increased from 2 to 4 and from 288 to 308 K, respectively. The effect of the pH was attributed to the interactions between the surface of the ACF and Pb²⁺ ions present in the water solution. The Pb(II) adsorption capacity of the ACFs was enhanced by oxidation with HNO₃ solution and the enhancement factor was between 1.1 and 1.4. The reversibility of the adsorption of Pb(II) was investigated by first adsorbing Pb(II) on an ACF and then desorbing the Pb(II). It was noticed that Pb(II) was substantially desorbed from ACF while reducing the solution pH to 2. It was concluded that the Pb(II) was mainly adsorbed on the ACFs by chemisorption, electrostatic interactions and ion exchange.     

Synergistic enhancement of the fluorescence intensity of 4,5-benzopiaselenol by surfactants and β-cyclodextrin in aqueous solution

The synergistic enhancement of the fluorescence intensity of 4,5-benzopiaselenol (I _F ^Se-DAN ) by surfactants (Sf) and -cyclodextrin (-CD) has been studied. The (I _F ^Se-DAN ) in sodium dodecyl sulfate (SDS)//gb-CD was approximately 30 times greater than that in water, and 5–6 times greater than that in either SDS or -CD solutions alone, and a blue-shift of the emission wavelength was observed.¹H-NMR experiments and determination of CMC values of Se-DAN/-CD, Se-DAN/SDS, and Se-DAN/SDS/-CD systems reveal that the synergistic fluorescence enhancement was produced by the SDS monomer/-CD inclusion complex. In essence, the synergistic enhancement is due to the altered microenvironment experienced by Se-DAN upon its transfer from water to the hydrophobic cavity upon complexation.     

The development of a cholesterol biosensor using a liquid crystal/aqueous interface in a SDS-included β-cyclodextrin aqueous solution

Sodium dodecyl sulphate (SDS) including β-cyclodextrin (β-CD) (β-CD_SDS) was used to detect cholesterol at the 4-cyano-4′-pentylbiphenyl (5CB)/aqueous interface in transmission electron microscopy (TEM) grid cells. The β-CD acts as a host for SDS (guest). The guest SDS enclosed within the β-CD cavity was replaced with cholesterol by injecting cholesterol solution into the TEM cell at concentrations greater than 3 μM. The replacement of SDS with cholesterol was confirmed by pH measurement and high performance liquid chromatography (HPLC). The SDS excluded from the β-CD altered the planar orientation of the 5CB confined within the TEM grid cell to a homeotropic orientation. This planar-to-homeotropic transition was observed using a polarized optical microscope under crossed polarizers. This convenient TEM grid cell provides a new method for the selective detection of cholesterol without immobilization of the detecting receptors (enzyme, antibody, or aptamer) or the use of sophisticated instruments.     

Solvent extraction of uranium(VI) and thorium(IV) by N,N′-di-p-tolylpyridine-2,6-dicarboxamide from nitric acid solution

Synthesis and characterization of N,N′-di-p-tolylpyridine-2,6-dicarboxamide (DTPDA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time and temperature) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.5DTPDA and Th(NO₃)₄·1.5DTPDA. The related thermodynamic functions were calculated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Adsorption of phenylalanine from aqueous solution onto active carbon and silica gel

The adsorption isotherms of phenylalanine from aqueous solution on active carbon andsilica gel at varying pH,and the influence of inorganic salt upon the ad rption have been studied(at 25℃).The adsorption amount of phcnylalanine on the silica gel is very low due to the strong ad-sorption of water by silica gel.The results on the active carbon show:(1)The adsorption is found to bepH-dependent,within pH 4.1—5.1 it increases with pH,within pH 5.1—11.8 it decreases with pH,atpH 5.1 the adsorption reaches its maximum;(2)The phenylalanine is adsorbed mainly in the formof zwitterion;(3)A certain amount of cations and anions of phenylalanine are also adsorbed with vander Waals interaction;(4)After adding NaCl,the adsorption of phenylalanine increases markedly.     

Adsorption behavior of As(V) from aqueous solution by using Fe3+–MnO4−-modified activated carbon (Leucaena leucocephala (Lam) de Wit)

Research on Chemical Intermediates - The objective of this work was to prepare a highly efficient adsorbent from Leucaena leucocephala (Lam) de Wit via pyrolysis and chemical activation (H3PO4)...     

Inclusion of the herbicide difenzoquat (1,2-dimethyl-3,5-diphenyl-pyrazolium) byβ-cyclodextrin in aqueous solution

The herbicide difenzoquat, 1,2-dimethyl-3,5-diphenyl-pyrazolium methylsulphate, forms a weak inclusion complex with CD having 1 : 1 stoichiometry and a formation constant ofK=70±12 mol^–1 L. The complexation changes the solution conductivity and substantially enhances the fluorescence intensity. The probable configuration of the inclusion complex is the insertion of the pyrazole ring into the cavity, leaving both phenyl substituents outside.     

Extraction of cobalt(Ⅱ) from aqueous solution by N,N'-carbonyl difatty amides

The development of economic and environmentally friendly extractants to recover cobalt metal is required due to the increasing demand for this metal.In this study,solvent extraction of Co(Ⅱ) from aqueous solution using a mixture of N,N’-carbonyl difatty amides(CDFAs) synthesised from palm oil as the extractant was carried out.The effects of various parameters such as acid,contact time,extractant concentration,metal ion concentration and stripping agent and the separation of Co(Ⅱ) from other metal ions such as Fe(Ⅱ),Ni(Ⅱ),Zn(Ⅲ) and Cd(Ⅱ) were investigated.It was found that the extraction of Co(Ⅱ) into the organic phase involved the formation of 1:1 complexes.Co(Ⅱ) was successfully separated from commonly associated metal ions such as Fe(Ⅱ),Ni(Ⅱ),Zn(Ⅲ) and Cd(Ⅱ).Co(Ⅱ) stripping from the loaded organic phase was studied in aqueous solution.These results are useful to recover Co(Ⅱ) from aqueous solution utilising(CDFAs) as an extractant.     

Inclusion complexes of Sulconazole with β-cyclodextrin and hydroxypropyl β-cyclodextrin: characterization in aqueous solution and in solid state

Complexation between sulconazole (SULC), an imidazole derivative with in vitro antifungal and antiyeast activity, and β-cyclodextrins (β-CD and HP-β-CD) was studied in solution and in solid states. Complexation in solution was evaluated using solubility studies and nuclear magnetic resonance spectroscopy (¹H-NMR). In the solid state, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM) and RX diffraction studies were used. Solubility studies suggested the existence of inclusion complex between SULC and β-CD or HP-β-CD. ¹H-NMR spectroscopy studies showed that the complex formed occurs by complexation of imidazole ring into inner cavity. DSC studies showed the existence of a complex of SULC with β-CD. The TGA and RX studies confirmed the DSC results of the complex. Solubility of SULC in solid complexes was studied by the dissolution method and it was found to be much more soluble than the uncomplexed drug.     

The complexation of flurbiprofen with β-cyclodextrin: a NMR study in aqueous solution

The complexation process between racemic flurbiprofen and β-cyclodextrin in solution was investigated by 1D and 2D proton NMR spectroscopy. In the presence of β-cyclodextrin, the aromatic protons of flurbiprofen were the most affected, suggesting a strong involvement of the phenyl groups in the inclusion mechanism. The stoichiometry of the complex was determined by the method of continuous variation, using the chemical induced shifts of both host and guest protons. The association constant, K_a of the obtained complex was calculated and found to be 2483.8 M^?1. On the other hand, signals belonging to the protons associated with the carboxyl group are split in the presence of β-cyclodextrin indicating enantiomeric differentiation. Rotating frame NOE spectroscopy, (ROESY), was used to ascertain the solution geometry of the host–guest complex. The result suggested that the flurbiprofen molecule fully penetrates the β-cyclodextrin cavity with the carboxyl group protruding from the primary hydroxyl side and the phenyl group close to the secondary rim.     

Liquid–liquid extraction of mercury(II) from aqueous solution using furosemide in benzyl alcohol

Journal of Radioanalytical and Nuclear Chemistry - A simple, efficient and economical liquid–liquid extraction method has been developed for quantitative extraction of mercury(II) from...     

Study of complexation of gliclazide with β-cyclodextrin in solution by nmr techniques

The study of complexation between GL and -CD in liquid medium has been carried out by phase-solubility,¹H and¹³C NMR studies. A formation complex is observed from the phase solubility diagram, being the average association constant of 1094 M^–1, The NMR studies revealed the preferent complexation of the aliphatic moiety of GL. The aromatic moiety is also entrapped, but in minor extent, by the CD molecules.