Thermodynamics and kinetics of hydrogen absorption–desorption of highly crystalline LaNi<Subscript>5</Subscript>

Lanthanum penta-nickel (LaNi₅) has been considered as potential candidates for hydrogen storage application at room temperature (20 °C). The intermetallic could store more than 1.36 mass % hydrogen. Substantially, work has been done on the hydrogenation–dehydrogenation kinetics and thermodynamics of LaNi₅. It has been reported that the hydrogen storage capacity reduced after single activation due to the deep trap of hydrogen. The kinetics and thermodynamics of trap hydrogen need to be quantified to understand the nature of trap and the required temperature to release the trapped hydrogen. In the current study, thermodynamics and kinetics of hydrogenation–dehydrogenation of high phase purity crystalline LaNi₅ were investigated. Sievert’s apparatus was used to investigate the pressure composition-temperature measurement to find out the cyclic hydrogen storage capacity and the thermodynamic parameters. The thermodynamic data obtained were evaluated using high-pressure differential scanning calorimetric technique. The trap hydrogen and their desorption kinetics were studied using thermogravimetric–thermal analysis–mass spectrometric techniques.     

Hydrogen absorption kinetics of V–Al alloy

The vanadium–aluminum alloy has been prepared by aluminothermy process. The alloy ingot obtained was refined by electron beam melting and homogenized by vacuum arc melting technique. The refined alloy was crushed into small pieces. These pieces were kept isothermally in a thermobalance attached to the Sieverts apparatus for the hydrogen charging. Reacted fraction α was calculated using isothermal thermo-gravimetry method. The reacted fraction α–t data thus obtained have been linearly fitted over a suitable reaction mechanism function. Rate constants at different temperatures are determined using slope of these linearly fitted curves. Activation energy of hydrogen charging has been calculated using Arrhenius equation.     

Thermodynamics,structure and kinetics in the system Ga–O–N

Within the ternary system Ga–O–N we performed experimental and theoretical investigations on the thermodynamics, structure and kinetics of new stable and metastable compounds.We studied the ammonolysis of β-Ga₂O₃ at elevated temperatures by means of ex situ X-ray diffraction, ex situ neutron diffraction, and in situ X-ray absorption spectroscopy (XAS). From total diffraction pattern refinement with the Rietveld method we analyzed the anionic occupancy factors and the lattice parameters of β-Ga₂O₃ during the reaction. Within the detection limits of these methods, we can rule out the existence of a crystalline oxynitride phase that is not derived from wurtzite-type GaN. The nitrogen solubility in β-Ga₂O₃ was found to be below the detection limit of about 2–3 at.% in the anionic sublattice. The kinetics of the ammonolysis of β-Ga₂O₃ to α-GaN and of the oxidation of α-GaN to β-Ga₂O₃ was studied by means of in situ X-ray absorption spectroscopy. In both cases the reaction kinetics could be described well by fitting linear combinations of β-Ga₂O₃ and α-GaN spectra only, excluding that other crystalline or amorphous phases appear during these reactions. The kinetics of the ammonolysis can be described well by an extended Johnson–Mehl–Avrami–Kolmogorow model with nucleation and growth of GaN nuclei, while the oxidation kinetics can be modeled by a shrinking core model where Ga₂O₃ grows as a layer. Investigations by means of TEM and SEM support the assumptions in both models.To investigate the structure and energetics of spinel-type gallium oxynitrides (γ-galons) we performed first-principles calculations using density-functional theory. In addition to the ideal cubic γ-Ga₃O₃N we studied gallium deficient γ-galons within the Constant-Anion-Model.In highly non-stoichiometric, amorphous gallium oxide of approximate composition GaO_1.2 we found at a temperature around 670 K an insulator–metal transition, with a conductivity jump of seven orders of magnitude. We demonstrate through experimental studies and density-functional theory calculations that the conductivity jump takes place at a critical gallium concentration and is induced by crystallization of stoichiometric β-Ga₂O₃ within the metastable oxide matrix. By doping with nitrogen the critical temperature and the conductivity in the highly conducting state can be tuned.     

Selected electrochemical properties of Pd–Au alloys: hydrogen absorption and surface oxidation

Hydrogen absorption into and surface oxidation of Pd–Au alloys in acidic solutions were studied by cyclic voltammetry (CV) and chronoamperometry (CA) coupled with the electrochemical quartz crystal microbalance (EQCM). The influence of alloy bulk and surface composition on the process of oxidation of absorbed hydrogen was examined. The stresses induced by hydrogen insertion in Pd–Au alloys were compared with the case of pure Pd. The potential corresponding to the formation of a monolayer of surface oxide was determined for Pd–Au alloys of different surface states. Electrochemical dissolution of Pd–Au alloys was investigated.     

Hydrogen sorption–desorption studies on ZrCo–hydrogen system

The ZrCo–H₂ system was investigated in this study owing to its importance as a suitable candidate material for storage, supply, and recovery of hydrogen isotopes. Desorption hydrogen pressure-composition isotherms were generated at six different temperatures in the range of 524–624 K. A van’t Hoff plot was constructed using the plateau pressure data of each pressure-composition isotherms and the thermodynamic parameters were calculated for the hydrogen desorption reaction of ZrCo hydride. The enthalpy and entropy change for the desorption of hydrogen were found to be 83.7 ± 3.9 kJ mol^?1 H₂ and 122 ± 4 J mol^?1 H₂ K^?1, respectively. Hydrogen absorption kinetics of ZrCo–H₂ system was studied at four different temperatures in the range of 544–603 K and the activation energy for the absorption of hydrogen by ZrCo was found to be 120 ± 5 kJ mol^?1 H₂ by fitting kinetic data into suitable kinetic model equation.     

Formation and nitridation of vanadium–aluminum intermetallic compounds

V(5)Al(8) and V(3)Al intermetallics have been formed by interdiffusion, by annealing of sputtered V/Al-multilayers at 700 degrees C in vacuo; sapphire (102) was used as substrate. The V/Al intermetallics were nitridated in NH(3) at 900 degrees C for 1 min by RTP (rapid thermal processing). The samples were investigated with XRD (X-ray diffraction), SNMS (secondary neutral mass spectrometry), and AFM (atomic force microscopy). A 5-10 nm thick AlN film (001 textured) was formed by nitridation of V(5)Al(8) (110 textured) and 2-3% nitrogen was incorporated in the V(5)Al(8) bulk. Nitridation of V(3)Al resulted in the formation of VN and AlN. Direct nitridation of V/Al-multilayers showed that near the surface nitridation is faster than intermixing of the V and Al layers. The capability of VN as diffusion barrier for Al could also be shown.     

Microstructure and hydrogen production activity of Pt–TiO2 prepared by precipitation–photodeposition

A series of Pt–TiO₂ photocatalysts were prepared by a facile precipitation–photoreduction method under different pH conditions, using H₂PtCl₆ as platinum precursor. The microstructure and chemical state of Pt loaded on the surface of TiO₂ were analyzed by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). It was revealed that the size and distribution of Pt nanoparticles on TiO₂ surface is closely related to the initial pH of H₂PtCl₆ solution. The optimal pH value for forming highly dispersed Pt nanoparticles is 12. The photocatalytic activities of the prepared samples were investigated in terms of hydrogen production. The results indicated that the Pt–TiO₂ sample prepared by precipitation–photodeposition method shows much higher activity than that prepared by traditional photodeposition method.     

Bubble points of hydrogen chloride–water–isopropanol and hydrogen chloride–water–isopropanol–benzene systems and liquid–liquid equilibria of hydrogen chloride–water–benzene and hydrogen chloride–water–isopropanol–benzene systems

Bubble points of the HCl–water–isopropanol and the HCl–water–isopropanol–benzene systems and liquid–liquid equilibria (LLE) of the HCl–water–benzene and the HCl–water– isopropanol–benzene systems were measured at 25–85°C and 30–70°C, respectively. The electrolyte nonrandom two-liquid model proposed by Chen et al. [C.-C. Chen, H.I. Britt, J.F. Boston, L.B. Evans, AIChE J. 28 (1982) 588–596] can satisfactorily correlate bubble points and liquid–liquid equilibria of the present mixed-solvent electrolyte systems over the entire range of temperature and concentrations using only binary adjustable parameters.     

Determination of chromium,manganese and vanadium in sediments and soils by modifier—free slurry sampling electrothermal atomic absorption spectrometry

Slurried sediment and soil samples of the certified reference materials with a highly elevated level of the metals of interest (Mn, Cr and V) were analysed by electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background correction. The method of slurry preparation and time-temperature programmes were optimized and, finally, the use of chemical modifiers was not necessary. The effect of alternate spectral lines and gas mini-flows on characteristic masses of analytes was studied. The homogeneity of samples and the influence of short sample grinding were also discussed. The simple, aqueous standard based calibration graphs (except Mn at the concentration > 1000 mg kg⁻¹) were applied for the quantification of results. The results of determinations obtained by slurry sampling agreed well with the cetified values, and the relative standard deviations (RSDs) for the over-all analytical procedure repeatability (at slurries concentration level about 2 mg/2 ml) were less than 9.5%, except manganese (10.4%).     

Thermodynamics, kinetics, and photochemistry of β-strand association and dissociation in a split-GFP system

Truncated green fluorescent protein (GFP) that is refolded after removing the 10th β-strand can readily bind to a synthetic strand to recover the absorbance and fluorescence of the whole protein. This allows rigorous experimental determination of thermodynamic and kinetic parameters of the split system including the equilibrium constant and the association/dissociation rates, which enables residue-specific analysis of peptide-protein interactions. The dissociation rate of the noncovalently bound strand is observed by strand exchange that is accompanied by a color change, and surprisingly, the rate is greatly enhanced by light irradiation. This peptide-protein photodissociation is a very unusual phenomenon and can potentially be useful for introducing spatially and temporally well-defined perturbations to biological systems as a genetically encoded caged protein.     

Characterization and preparation of nanocrystalline MgCuZn ferrite powders synthesized by sol–gel auto-combustion method

Nanocrystalline Mg–Cu–Zn ferrite powders were successfully synthesized through nitrate–citrate gel auto-combustion method. Characterization of the nitrate–citrate gel, as-burnt powder and calcined powders at different calcination conditions were investigated by using XRD, DTA/TG, IR spectra, EDX, VSM, SEM and TEM techniques. IR spectra and DTA/TGA studies revealed that the combustion process is an oxidation–reduction reaction in which the NO₃ ⁻ ion is oxidant and the carboxyl group is reductant. The results of XRD show that the decomposition of the gel indicated a gradual transition from an amorphous material to a crystalline phase. In addition, increasing the calcination temperature resulted in increasing the crystallite size of Mg–Cu–Zn ferrite powders. VSM measurement also indicated that the maximum saturation magnetization (64.1 emu/g) appears for sample calcined at 800 °C while there is not much further increase in M _s at higher calcination temperature. The value of coercivity field (H _c) presents a maximum value of 182.7 Oe at calcination temperature 700 °C. TEM micrograph of the sample calcined at 800 °C showed spherical nanocrystalline ferrite powders with mean size of 36 nm. The toroidal sample sintered at 900 °C for 4 h presents the initial permeability (μ _i) of 405 at 1 MHz and electrical resistivity (ρ) of 1.02 × 10⁸ Ω cm.     

Thermodynamics and kinetics of a Gō proteinlike heteropolymer model with two-state folding characteristics

We present results of Monte Carlo computer simulations of a coarse-grained hydrophobic-polar Gō-like heteropolymer model and discuss thermodynamic properties and kinetics of an exemplified heteropolymer, exhibiting two-state folding behavior. It turns out that general, characteristic folding features of realistic proteins with a single free-energy barrier can also be observed in this simplified model, where the folding transition is primarily driven by the hydrophobic force.     

Structure and kinetics of lipid–nucleic acid complexes

The structure and function of lipid-based complexes (lipoplexes) have been widely investigated as cellular delivery vehicles for nucleic acids—DNA and siRNA. Transfection efficiency in applications such as gene therapy and gene silencing has been clearly linked to the local, nano-scale organization of the nucleic acid in the vehicle, as well as to the global properties (e.g. size) of the carriers. This review focuses on both the structure of DNA and siRNA complexes with cationic lipids, and the kinetics of structure evolution during complex formation.     

Thermal,chemical and antimicrobial characterization of bioactive titania synthesized by sol–gel method

Journal of Thermal Analysis and Calorimetry - Chemical stability, anticorrosive properties and photocatalytic activity of titanium dioxide (TiO2) are among the most important characteristics for...     

Pyrolysis and combustion kinetics of microcapsules containing carbon nanofibers by thermal analysis–mass spectrometry

The thermal properties of microcapsules containing carbon nanofibers (CNFs) suspended in ethyl phenylacetate (EPA) were investigated by thermogravimetric analysis coupled with mass spectrometry (TGA–MS). The pyrolysis of these microcapsules consisted of two stages. During the first one (100–150 °C), the emissions of aromatic compounds coming from the decomposition of EPA were identified. In the second one (150–290 °C), NH₂–CO coming from primary amide decomposition was mainly detected.A multiple-step model was used to predict the thermal decomposition of the synthesized microcapsules under both inert and oxidant atmospheres. Furthermore, pyrolysis and combustion kinetic parameters such as pre-exponential factor and activation energy of these microcapsules were estimated by nonlinear regression. An excellent agreement between experimental and predicted data was observed and confirmed from the statistical point of view.     

Analysis of neem oils by LC–MS and degradation kinetics of azadirachtin-A in a controlled environment

Since it was first isolated, the oil extracted from seeds of neem (Azadirachtin indica A juss) has been extensively studied in terms of its efficacy as an insecticide. Several industrial formulations are produced as emulsifiable solutions containing a stated titer of the active ingredient azadirachtin-A (AZ-A). The work reported here is the characterization of a formulation of this insecticide marketed under the name of Neem-azal T/S and kinetic studies of the major active ingredient of this formulation. We initially performed liquid–liquid extraction to isolate the neem oil from other ingredients in the commercial mixture. This was followed by a purification using flash chromatography and semi-preparative chromatography, leading to ¹³C NMR identification of structures such as azadirachtin-A, azadirachtin-B, and azadirachtin-H. The neem extract was also characterized by HPLC–MS using two ionization sources, APCI (atmospheric pressure chemical ionization) and ESI (electrospray ionization) in positive and negative ion modes of detection. This led to the identification of other compounds present in the extract—azadirachtin-D, azadirachtin-I, deacetylnimbin, deacetylsalannin, nimbin, and salannin. The comparative study of data gathered by use of the two ionization sources is discussed and shows that the ESI source enables the largest number of structures to be identified. In a second part, kinetic changes in the main product (AZ-A) were studied under precise conditions of pH (2, 4, 6, and 8), temperature (40 to 70 °C), and light (UV, dark room and in daylight). This enabled us to determine the degradation kinetics of the product (AZ-A) over time. The activation energy of the molecule (75±9 kJ mol^–1) was determined by examining thermal stability in the range 40 to 70 °C. The degradation products of this compound were identified by use of HPLC–MS and HPLC–MS–MS. The results enabled proposal of a chemical degradation reaction route for AZ-A under different conditions of pH and temperature. The data show that at room temperature and pH between 4 and 5 the product degrades into two preferential forms that are hydrolyzed to a single product over time and as a function of pH change.     

Sol–gel synthesized vanadium doped TiO2 photocatalyst: physicochemical properties and visible light photocatalytic studies

Vanadium doped titanium dioxide (V–TiO₂) photocatalyst was synthesized by the sol–gel method using ammonium vanadate as vanadium source. The prepared samples were characterized by XRD, N₂ adsorption–desorption method, UV–Vis DRS, Fourier transform infrared (FTIR), scanning electron microscope–energy dispersive X-ray and photoluminescence (PL) analysis. The results show that V⁵⁺ ions were successfully incorporated into the crystal lattice of TiO₂ as a consequence, not only an obvious decrease in the band gap and a red shift of the absorption threshold into the visible light region was recorded for the V modified TiO₂, but, also a decrease in photogenerated electrons and holes recombination rate was observed as demonstrated by PL analysis. FTIR study indicated that in undoped TiO₂ sample the acetate group favored a bidentate bridging mode of binding with titanium atoms, whereas a bidentate chelating mode of linkage was observed in V–TiO₂ powders. The crystallite size of the samples calcined at 300 and 500 °C were decreased beyond the molar ratio of 200:1 (V:Ti), this may be due to dopant presence in the grain boundaries hindering the crystal growth. The photocatalytic activities for both pure and vanadium doped TiO₂ powders were tested in the discoloration of a reactive dyestuff, methylene blue, under visible light. The 100:1 (V:Ti) doped photocatalyst, calcined at 300 °C showed enhanced photocatalytic activity under visible light with a rate constant (k_obs) of 5.024 × 10^?3 min^?1 which is nearly five times higher than that of pure TiO₂, as result of low band gap value, high specific surface area and a decrease in recombination rate.