Ethanolics extracts of Moringa

The use of natural antioxidants has been widely promoted in the food industry, because it is economically viable and very attractive with consumers. In this study, we determined the extractable total phenolic content (FET) of crude ethanol extracts of the leaves (EL), flowers, and seed pods of Moringa oleifera Lam. We also evaluated the antioxidant effect of the extracts on oxidative stability of soybean oil, through the accelerated PDSC and Rancimat^® techniques using the synthetic antioxidants butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ) as positive control. The values of FET in the extracts ranged from 41.75 ± 3.35 to 53.69 ± 1.00 mg GAE g^?1, and EL extract exhibited best result. The results of oxidative stability in both techniques showed that the EL extract provided greater protection to the oil, indicating a correlation between the amount of FET and the protective effect. Comparison made between the synthetic antioxidants and extracts revealed that in the Rancimat technique, extracts were less effective than the synthetic antioxidants TBHQ and BHT, however, in the PDSC technique the EL extract was more effective than BHT, proving to be a good alternative for applications in the soybean oil, replacing this synthetic antioxidant.     

Rancimat and PDSC accelerated techniques for evaluation of oxidative stability of soybean oil with plant extracts

Taking into account the importance of natural antioxidants in the preservation of oils and fats, the present study evaluated the antioxidant action of five plant extracts in the control of soybean oil stability, by means of the accelerated techniques Rancimat and PDSC. These plants are rosemary (Rosmarinus officinalis L.), chamomile (Matricaria recutita L.), coriander (Coriandrum sativum L.), fennel (Foeniculum vulgare), and senna (Cassia angustifolia Vahl). The plant extracts and also the synthetic antioxidant BHT were added to the samples of crude soybean oil at the concentration of 1,000 mg kg^?1. The values of total phenolic contents ranged from 8.7 ± 0.4 to 63.0 ± 2.3 mg GAE g^?1 extract and a strong positive correlation was observed between the total phenolic contents and the overall antioxidant activity of the plant extracts. Such high values indicate a good protection of the analyzed soybean oil, moreover for the Rosemary extract that was superior to the remaining extracts. In the Rancimat technique the rosemary extract was more effective than the synthetic BHT antioxidant. The OIT values of Rosemary extract and the BHT antioxidant were equivalent, and the former, showed the highest phenolic contents among the extracts, for all the performed tests, confirming that it is a powerful natural source of antioxidants.     

Evaluating antioxidants efficiency during storage of ethylic and methylic biodiesel by low pressurized DSC and Rancimat methods

Efficiencies of four commercial antioxidants used during the storage of two biodiesel, BS-ethyl and BS-methyl, respectively obtained from soybean oil by ethylic and methylic routes, were evaluated by measuring their oxidative stability using a low pressurized DSC (low P-DSC) method developed by the authors and by Rancimat method, which is specified by the American ASTM D6751 and European EN 14214 standard methods. The operating temperature of the low P-DSC method was the same as that used in the Rancimat procedure (110 °C). The antioxidants, used in 500 mg kg^?1 content, have the following active components: phenol, biphenol, phenol + amine mixture, and a hydroquinone + organic acid mixture. Samples of each biodiesel–antioxidant mixture were evaluated simultaneously by the two methods, right after their preparation and 30, 60, 90, and 120 days of storage at 23 ± 1 °C. A non-dimensional oxidative induction time parameter, defined as the ratio between the oxidation induction time (OIT) or induction time (IT) values at a storage time t and at t = 0, was used to evaluate the antioxidant activity. For the same mixture, changes of this non-dimensional parameter calculated from OIT or IT show a similar trend with storage time, indicating that it can be determined either from low P-DSC or Rancimat method data. As the efficiency of the studied antioxidants depends on their composition, their interaction with each biodiesel, and on the storage time, this parameter can be used to indicate the best storage time for each antioxidant–biodiesel mixture.     

A complete evaluation of thermal and oxidative stability of chia oil

Chia (Salvia hispanica L.) seed oil is the richest natural source of α-linolenic acid, an n ? 3 polyunsaturated fatty acid (ω-3 PUFA), contributing to its use as functional and nutraceutical food in large part of Latin America. However, a food with such fatty acid composition could be highly susceptible to lipid oxidation. Thus, the present study was conducted to determine the thermal and oxidative stability of chia oil by various methods. Rancimat method was used to evaluate the effect of synthetic and natural antioxidants in the oxidative stability. Pressurized differential scanning calorimetry (PDSC), Schaal test and ¹H NMR spectroscopy were used to assess the thermal stability. The effect of frying temperature and/or heating time on fatty acid composition was assessed by ¹H NMR. The results show that tert-butylhydroquinone (TBHQ) and a mixture of TBHQ and rosemary extract were effective in increasing the oxidative stability of chia oil. Concerning the storage conditions, PDSC, Schaal test and ¹H NMR data showed that chia oil is stable at 60 °C; hence, there is no need for special storage conditions. PDSC and ¹H NMR results indicate that chia oil cannot be used in cooking and frying, because at high temperatures severe degradation of the unsaturated groups and loss of the nutritional properties of the oil occur.     

Ethanolic extracts of Moringa oleifera Lam.

This paper reports the evaluation of the antioxidant potential of the ethanolic extracts of the leaves (EL), flowers (EF), seed pods (EP) and seeds (ES) from Moringa oleifera Lam. The antioxidant potential was assessed, upon the addition of the extracts to fish oil, by means of the total extractable phenol content (TEP), the DPPH^· free radical scavenging efficiency and using pressurized differential scanning calorimetry (P-DSC). The results of TEP and DPPH^· showed that the ES extract does not present a potential to be used as an antioxidant additive, and it was thus discarded from the remaining analyses. Thus, the following treatments were prepared: pure fish oil, fish oil with BHT (100 mg kg^?1), fish oil with TBHQ (100 mg kg^?1) and fish oil with EL, EF and EP—all at the concentration of 100 mg kg^?1, in relation to the total extractable phenolics contained in each one of the extracts. The leaf and flower extracts displayed a protecting effect, with an increase in about 20 and 11 % of the OIT values, respectively. However, such protection was smaller than that conferred by the synthetic antioxidants utilized. As for the thermal analysis results, it was noticed that EL presented the highest thermal stability among the extracts.     

Evaluation of antioxidants on the thermo-oxidative stability of soybean biodiesel

This work shows the evaluation of three antioxidants (2,6-di-t-butyl-4-methylphenol (BHT)—synthetic antioxidant, hydrogenated cardanol (HC), and alkyl hydrogenated cardanol (AHC)—both derived from cashew nut shell liquid) on the thermo-oxidative stability of the soybean biodiesel. The antioxidants were added at concentrations of 200, 300, and 400 ppm, and the oxidative stability of the biofuel with and without antioxidants were investigated by thermogravimetric analysis (TG-DTG and IPDT) and Metrohm 743 Rancimat per the EN 14112 method. The results showed that all antioxidants contributed for the thermo-oxidative stability of the soybean biodiesel as follows: soybean biodiesel < soybean biodiesel + BHT < soybean biodiesel + HC < soybean biodiesel + AHC. In the Rancimat method, the results showed that the antioxidants influenced the biodiesel stability with an increase of at least 71 %.     

Sunflower biodiesel

The higher is the degree of unsaturation in ester chain of a biodiesel, the smaller is its oxidation stability. Sunflower biodiesel obtained by the ethyl route possesses a high amount of unsaturated fatty acids, mainly oleic acid (C18:1) and linoleic acid (C18:2), thus being more prone to the oxidation process. In Brazil, with the purpose of meeting the specifications of the Brazilian National Agency of Petroleum, Natural Gas and Biofuels (ANP), antioxidant additives, from synthetic and natural origins, have been added to the biofuel. Antioxidants are an alternative to prevent the oxidative deterioration of the fatty acid derivatives, as they are substances able to reduce the oxidation rate. In this study, the oxidative stability of sunflower biodiesel, obtained by the ethyl route and additivated with different concentrations of the antioxidants butylated hydroxytoluene (BHT) and t-butylhydroquinone (TBHQ), was evaluated by means of Pressure differential scanning calorimetry (P-DSC) and the Accelerated oxidative stability test (Rancimat, Method EN 14112). The results obtained by the two techniques showed the same oxidation tendency. Thus, P-DSC can be used as an alternative to determine the oxidative stability of biodiesel. The antioxidant TBHQ, added to biodiesel at the concentrations of 2000 and 2500 mg kg⁻¹, raised the oxidation induction time to a value higher than 6 h, the limit established by the Resolution ANP number 7/2008, thus being the best alternative among the studied antioxidants.     

An alternative method by pressurized DSC to evaluate biodiesel antioxidants efficiency

The purpose of this article is to present an alternative method developed using pressurized differential scanning calorimetry (P-DSC) to evaluate the oxidative behavior of biodiesel obtained from soybean oil, produced by ethylic route (BSET), with and without the addition of synthetic antioxidants, as well as to compare the results with those obtained by Rancimat Method, which were carried out according to the European Official Standard Method EN 14112. BSET samples were analyzed using four different types of synthetic antioxidants at concentrations varying between 250, 500, and 1000 mg kg⁻¹. The measurements done by P-DSC were performed using static air at 80 psi and isothermal conditions at 110 °C, the same operating temperature than the Rancimat method. The experimental results of the oxidative stability measured from both methods have shown good correlations, which depend on the antioxidant, showing a gradual improvement in the oxidative stability of BSET with increasing added concentration of antioxidants. Opposite result behavior occurred for the measurements done in the presence of one of the antioxidants, which was composed by a significant content of components volatile below 110 °C, which accelerate the induction of the biodiesel oxidation in P-DSC method, but apparently do not interfere in the electrical conductivity measurement method (Rancimat). The advantages of the developed method using P-DSC technique with respect to Rancimat method is that it allows one to use a smaller sample, increases sensitivity to antioxidant action, reduces the analysis time for the evaluation of the antioxidant efficiency and detects any occurring oxidative process, independently of the volatility of the formed products, which may form oxidated products that remain in the liquid phase and that are non detectable by Rancimat method.     

Comparison of the oxidative stability of soybean and sunflower oils enriched with herbal plant extracts

The present study was conducted to determine and compare the oxidative stability of soybean and sunflower oils using differential scanning calorimetry (DSC). These edible oils were enriched with marjoram (Origanum majorana L.), thyme (Thymus vulgaris L.), and oregano (Origanum vulgare L.) extracts at three different concentrations and synthetic antioxidant (BHA). The fatty acid composition of studied oils was determined by gas chromatography mass spectrometry to evaluate the content of unsaturated fatty acids that are sensitive to oxidation process. Oil samples were heated in the DSC at different heating rates (4.0, 7.5, 10.0, 12.5, and 15.0 °C min^?1) and oxidation kinetic parameters (activation energy, pre-exponential factor, and oxidation rate constant) were calculated. The results showed that the oxidative stability of sunflower oil samples enriched with oregano extracts and soybean oil supplemented with thyme extracts was improved compared to samples without the addition of herbal plant extracts and the synthetic antioxidant.     

Influence of the purification process on the stability of <Emphasis Type="Italic">Jatropha curcas</Emphasis> biodiesel

The aim of this work was to evaluate the influence of the purification process on the stability of Jatropha curcas biodiesel. The biodiesel was obtained using a variety of purification processes: three wet methods with different drying processes (vacuum oven, conventional oven and anhydrous sodium sulfate) and one dry method (purification with adsorbent magnesium silicate). Biodiesel was characterized through the analysis of carbon residue, acidity index, infrared and gas chromatography. The composition J. curcas oil indicated 56.3 % of unsaturated fatty acids and 43.7 % of saturated fatty acids. Jatropha oil presented high quantity of saturated acids, which are less susceptible at oxidation. The biodiesel sample that was chemically purified (PUsq) presented better purity, indicating be the process more efficient in remove the residues of synthesis. Thermogravimetric curves of purified biodiesel by wet method, PUsq, with chemical drying using anhydrous sodium sulfate, and PUsv, with vacuum drying, showed the highest initial decomposition temperatures, indicating higher thermal stability. The carbon residue and infrared analyses suggested that contamination by catalyst residue is a determining factor in reduction of the oxidative stability of biodiesel. The oxidative stability was evaluated using Rancimat and pressure differential scanning calorimetry. Biodiesel samples showing better oxidative stability were purified using PUsq and PUsv, which obtained stability of 6 h using the Rancimat technique, the minimum limit set by Brazilian legislation, without the addition of antioxidant, suggesting that these methods least influenced the stability of biodiesel.     

Rosemary (Rosmarinus officinalis L.) extract

The restriction to the use of synthetic antioxidants has fostered the research on natural antioxidants, taking into account that the prolonged usage of these substances can harm seriously the human being provoking degenerative diseases. In the present study, the antioxidant effect of the ethanolic rosemary (Rosmarinus officinalis L.) extract on the oxidative stability of edible vegetable oils was investigated by means of the pressurized differential scanning calorimetry (PDSC) and oven test techniques. The rosemary extract, at the concentration of 2,000 mg kg^?1, as well as the synthetic antioxidant tert-butylhydroquinone (TBHQ) at the concentrations of 100 and 200 mg kg^?1 were added to samples of sunflower oil, corn oil, and soybean oil. The fatty acid profiles of the vegetable oils were determined by gas chromatography–mass spectrometry confirming the elevated contents of unsaturated fatty acids. The thermogravimetric analysis showed that the rosemary extract is stable at the frying temperature of the oils. The results of the oxidative stability demonstrated that the extract of Rosmarinus officinalis displayed a more effective protective action in the PDSC technique, when compared with the synthetic antioxidant TBHQ, indicating that it is a promising source of natural antioxidants for edible vegetable oils.     

Comparative study of biodiesel oxidation stability using Rancimat,PetroOXY, and low P-DSC

Oxidation stability of biodiesel is one of the most important factors used to evaluate its quality, allowing its commercialization and ensuring its shelf life. In this context, several accelerated methods have been used to measure oxidative stability to predict the maximum storage time at which biodiesel can be submitted without compromising its quality. In the present study, the oxidation stability of two commercial biodiesel and of their blends with two antioxidants was evaluated using the standard methods described in the EN 14214 norm (Rancimat Method) and in ASTM D7545 (PetroOXY method), as well as by low pressurized differential scanning calorimetry (low P-DSC). Both biodiesel were obtained from soybean oil, produced by methylic and ethylic route. The antioxidants, which were used in different concentrations, have the following active components: bisphenol and phenol. The three assessed methodologies can be used to determine the effect of the commercial antioxidants on the oxidative stability of the studied biodiesel. As each method is based on the measurement of different parameters to obtain the respective oxidation induction time, their results cannot be compared directly. But when the results are expressed in terms of the percentage change of the respective oxidation induction times, there is a higher correlation between those obtained by Rancimat and PetroOXY methods than when compared with the results obtained by low P-DSC. Because of their characteristics, the bisphenolic antioxidant is more effective than the phenolic one and, at a same antioxidant concentration, the oxidation stability of the ethylic biodiesel is higher than that of the methylic one. Considering analysis time and sensitivity, the low P-DSC method is the one that better attends both parameters among the applied methods.     

Mass spectrometry characterisation of fatty acids from metabolically engineered soybean seeds

Improving the quality and performance of soybean oil as biodiesel depends on the chemical composition of its fatty acids and requires an increase in monounsaturated acids and a reduction in polyunsaturated acids. Despite its current use as a source of biofuel, soybean oil contains an average of 25 % oleic acid and 13 % palmitic acid, which negatively impacts its oxidative stability and freezing point, causing a high rate of nitrogen oxide emission. Gas chromatography and ion mobility mass spectrometry were conducted on soybean fatty acids from metabolically engineered seed extracts to determine the nature of the structural oleic and palmitic acids. The soybean genes FAD2-1 and FatB were placed under the control of the 35SCaMV constitutive promoter, introduced to soybean embryonic axes by particle bombardment and down-regulated using RNA interference technology. Results indicate that the metabolically engineered plants exhibited a significant increase in oleic acid (up to 94.58 %) and a reduction in palmitic acid (to <3 %) in their seed oil content. No structural differences were observed between the fatty acids of the transgenic and non-transgenic oil extracts.

Biosynthesis,characterization, and antimicrobial effect of silver nanoparticles obtained using <Emphasis Type="Italic">Lavandula</Emphasis> × <Emphasis Type="Italic">intermedia</Emphasis>

The use..... of aqueous leaf extract of Lavandula × intermedia for biosynthesis of silver nanoparticles (AgNPs) is presented. The plant extract was obtained by boiling dried leaves and using the obtained filtrate for the synthesis of AgNPs. The study was conducted to investigate an ecofriendly approach to metal nanoparticle synthesis and to evaluate the antimicrobial potential of both the aqueous plant extract and resulting silver nanoparticles against different microbes using the disc diffusion method. The synthesis of silver nanoparticles was monitored using ultraviolet–visible (UV–v is) spectroscopy, which showed a localized surface plasmon resonance band at 411 nm and a shift of the band to higher wavenumber of 422 nm after 90 min of reaction. Powder X-ray diffraction analysis and transmission electron microscopy of the obtained AgNPs revealed their crystalline nature, with average size of 12.6 nm. Presence of elemental silver was further confirmed by energy-dispersive X-ray spectroscopy. Fourier-transform infrared spectroscopy confirmed presence of phytochemicals from Lavandula × intermedia leaf extract on the AgNPs. The AgNPs showed good antimicrobial activity with inhibition zone ranging from 10 to 23 mm; the largest inhibition zone (23 mm) occurred against Escherichia coli. Generally, the AgNPs displayed more antimicrobial activity against all investigated pathogens compared with Lavandula × intermedia leaf extract, and were also more active than streptomycin against Klebsiella oxytoca and E. coli at the same concentration. The silver nanoparticles showed prominent antimicrobial activity with a lowest minimum inhibitory concentration (MIC) value of 15 μg/mL against E. coli, K. oxytoca, and Candida albicans.     

Influence of oxidative injury and monitoring of blood plasma by DSC on patients with psoriasis

Oxidative stress induced by oxygen free radicals (OFRs) is a casual factor in psoriasis. Our aim was to detect the oxidative stress parameters and blood plasma changes with differential scanning calorimetry (DSC) in psoriatic patients. The study included untreated (n = 39) and treated (retinoids, methotrexate, biologic response modifiers; n = 33) white adult patients from both sex. To monitor oxidative stress concentration of malondialdehyde (MDA), reduced glutathione and sulfhydryl groups, production of OFRs, and activity of myeloperoxidase (MPO), superoxide dismutase, and catalase were measured. Denaturation of plasma components was detected in SETARAM Micro DSC-II calorimeter. Total production of OFRs and MPO activity, and the concentration of MDA were significantly increased both in untreated patients with moderate and severe symptoms and in all drug-treated groups compared with controls (p < 0.001). All of the scavengers and antioxidants were significantly decreased in untreated patients and better preserved after retinoid and biological therapy. DSC scans of blood plasma showed melting temperature a characteristic parameter to follow the severity of disease. The calorimetric enthalpy is exhibiting a moderate decrease with the progression of the inflammation. These findings suggest that an imbalance exists between pro-oxidants and antioxidants in untreated severe psoriatic patients. All drug therapy reduced the changes, mainly the biologic response modifiers. Similarly, DSC showed differences between untreated and conventional systemic drug treatment.     

Biodiesel from soybean oil,castor oil and their blends

Even not being described in the EN 14112 standard, PDSC has been used for the determination of the biodiesel oxidative stability, by OIT and OT measurements. In this study, biodiesel blends were obtained by mixing soybean (BES) and castor (BEM) ethyl esters and its induction periods were measured by Rancimat and PDSC. The blends (BSM _X ) showed intermediate values of OSI, OT, and OIT, compared with BES and BEM. Although, the molar fraction of the components varied linearly in BSM _X , OSI, OT, and OIT values increased exponentially in relation to the castor biodiesel amount in the blends. Introduction of castor oil biodiesel increased the blend stability, so the BSM₃₀ blend reached the OSI limit of 6 h. OSI, OIT, and OT showed a high-linear correlation, pointing out that PDSC can be used in the analysis of this kind of biodiesel, with a smaller sample and analysis time, as compared to Rancimat. The use of biodiesel blends was a good alternative in the correction of the oxidative stability of the final product without the need of antioxidant addition.     

Determination of Phenolic Anti-Oxidants in Edible Oil by High-Performance Liquid Chromatography with Amperometric Detector

Abstract

A high-performance liquid chromatography (HPLC) with amperometric detection was investigated for the analysis of 2-and 3-tert-butyl-4-hydroxyanisole (BHA), 3,5-di-tert?butyl-4-hydroxytoluene (BHT), and tert?butyl-hydroquinone (TBHQ) in edible oil. The reversed-phase system developed was combined with an amperometric detector, the working electrode of which was made of glassy carbon, in order to compare the sensitivity and selectivity of ultraviolet and fluorometric detection. For the amperometric detection of HPLC, cyclic voltammetry was used to monitor the electrochemical properties of the phenolic antioxidants. A simple isolation procedure, based on the continuous liquid-liquid partition technique, was examined for the extraction and clean up of the antioxidants from edible oil. The recovery rates of BHA, BHT, and TBHQ added salad oil were between 90.2-107.7% in the range of 1-50 ppm of the antioxidants. By the present method, BHA, BHT, and TBHQ were well separated, identified and quantitated with a high sensitivity.     

Comparison of the effect of <Emphasis Type="Italic">Pleurotus citrinopileatus</Emphasis> extract and vitamin E on the stabilization properties of camellia oil

We selected Camellia tenuifolia (Hayata) seed oil to compare the effects of mushroom extract and vitamin E on its stabilization properties. Camellia tenuifolia was selected for its higher oil content, but its proportions of unsaturated fatty acids and natural antioxidants as well as its oxidation stability are lower than those of Camellia oleifera oil. Our aim was to improve the oxidation stability, thermal stability, and photodegradation of C. tenuifolia seed oil and then compare the advantages of mixing traditional antioxidant (vitamin E) and mushroom natural antioxidant components (mushroom extract) in the oil. The focus was on the analysis of the effects of Pleurotus citrinopileatus (Singer) extract and vitamin E on the stabilization properties of C. tenuifolia seed oil, which involved some degradation research, such as evaluating the thermal, oxidation, and antioxidant effects as well as the irradiative (pulsed light) stability of the original oil and oil mixed with additives for comparing the differences by differential scanning calorimetry tests and isothermal microcalorimeter (TAM Air) analyses. We determined the effects of stabilization additives vitamin E and various PC extract doses by using pulsed light irradiation (0, 30, and 60 pulses) and found that the 3 mass% PC extract had the best antiphotodegradation characteristics, and the 0.1 mass% vitamin E indicated the outstanding oxidation stability for among all of the additives in this study. Overall, we obtained the following suitable conditions to stabilize camellia oil: addition of vitamin E, addition of 3 mass% PC extract, and a nitrogen atmosphere.     

The Purification and Characterization of Lipases from <Emphasis Type="Italic">Lasiodiplodia theobromae</Emphasis>, and Their Immobilization and Use for Biodiesel Production from Coconut Oil

The coconut kernel-associated fungus, Lasiodiplodia theobromae VBE1, was grown on coconut cake with added coconut oil as lipase inducer under solid-state fermentation conditions. The extracellular-produced lipases were purified and resulted in two enzymes: lipase A (68,000 Da)—purified 25.41-fold, recovery of 47.1%—and lipase B (32,000 Da)—purified 18.47-fold, recovery of 8.2%. Both lipases showed optimal activity at pH 8.0 and 35 °C, were activated by Ca²⁺, exhibited highest specificity towards coconut oil and p-nitrophenyl palmitate, and were stable in iso-octane and hexane. Ethanol supported higher lipase activity than methanol, and n-butanol inactivated both lipases. Crude lipase immobilized by entrapment within 4% (w/v) calcium alginate beads was more stable than the crude-free lipase preparation within the range pH 2.5–10.0 and 20–80 °C. The immobilized lipase preparation was used to catalyze the transesterification/methanolysis of coconut oil to biodiesel (fatty acyl methyl esters (FAMEs)) and was quantified by gas chromatography. The principal FAMEs were laurate (46.1%), myristate (22.3%), palmitate (9.9%), and oleate (7.2%), with minor amounts of caprylate, caprate, and stearate also present. The FAME profile was comparatively similar to NaOH-mediated transesterified biodiesel from coconut oil, but distinctly different to petroleum-derived diesel. This study concluded that Lasiodiplodia theobromae VBE1 lipases have potential for biodiesel production from coconut oil.     

Bioethanol Production from Soybean Residue via Separate Hydrolysis and Fermentation

Bioethanol was produced using polysaccharide from soybean residue as biomass by separate hydrolysis and fermentation (SHF). This study focused on pretreatment, enzyme saccharification, and fermentation. Pretreatment to obtain monosaccharide was carried out with 20% (w/v) soybean residue slurry and 270 mmol/L H₂SO₄ at 121 °C for 60 min. More monosaccharide was obtained from enzymatic hydrolysis with a 16 U/mL mixture of commercial enzymes C-Tec 2 and Viscozyme L at 45 °C for 48 h. Ethanol fermentation with 20% (w/v) soybean residue hydrolysate was performed using wild-type and Saccharomyces cerevisiae KCCM 1129 adapted to high concentrations of galactose, using a flask and 5-L fermenter. When the wild type of S. cerevisiae was used, an ethanol production of 20.8 g/L with an ethanol yield of 0.31 g/g consumed glucose was obtained. Ethanol productions of 33.9 and 31.6 g/L with ethanol yield of 0.49 g/g consumed glucose and 0.47 g/g consumed glucose were obtained in a flask and a 5-L fermenter, respectively, using S. cerevisiae adapted to a high concentration of galactose. Therefore, adapted S. cerevisiae to galactose could enhance the overall ethanol fermentation yields compared to the wild-type one.