Using TG–FTIR and TG–MS to study thermal degradation of metal hypophosphites

Three typical metal hypophosphite flame retardants La(H₂PO₂)₃·H₂O (LHP), Ce(H₂PO₂)₃·H₂O (CHP), and Al(H₂PO₂)₃ (AHP) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis (TG), derivative thermogravimetric analysis, and differential thermal analysis. The thermal degradation products from the synthesized metal hypophosphites were also investigated using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG–FTIR) and thermogravimetry coupled with mass spectrometry (TG–MS). The synthesized metal hypophosphites were also used as flame retardants for poly (1,4-butylene terephthalate) (PBT), and the combustion properties of flame-retarded PBT were evaluated using the limiting oxygen index and UL-94 tests. The results showed that the metal hypophosphites LHP, CHP, and AHP can be used as effective flame retardants for PBT, and these compounds can be obtained through a simple precipitation method. TG–FTIR and TG–MS results showed that the degradation process of AHP involves two steps, corresponding to the removal PH₃ reaction and the further dehydration reaction of the hydrogen phosphate aluminum. While LHP and CHP have three degradation steps, the additional step is due to that LHP and CHP which will loss the crystal water at lower temperature.     

Study on the effects of flame retardants on the thermal decomposition of wood by TG–MS

The effect of three flame retardants, K₂CO₃, Na₂SiO₃·9H₂O, and Na₂B₄O₇·10H₂O on the process and composition of volatile products of the thermal degradation of wood has been investigated by the thermogravimetric (TG), differential thermogravimetry (DTG), differential thermal analysis (DTA), and the synchronous thermogravimetry–mass spectrometry (TG–MS) analysis methods. The results showed that the ion current intensity and ion peak area of m/z = 18 and 44 MS signals were increased by the flame retardants but the ion peak area of m/z = 28 MS signal was decreased (except K₂CO₃) at the meantime. What’s more, the ion current intensity and ion peak area of m/z = 60 and 68 MS signals were also decreased (except K₂CO₃), which mean that Na₂B₄O₇ can significantly enhances the dehydration and inhibits the depolymerization of wood. Although K₂CO₃ accelerates the dehydration reaction, it cannot inhibit the depolymerization reaction effectively, so the flame retardant efficiency of K₂CO₃ is decreased with the higher concentration. The catalysis of dehydration reaction of Na₂SiO₃ is the worst one.     

Study of effect of phosphate and uranium ions on the thermal properties of surfactant-modified natural red clay using TG–FTIR–MS techniques

Products of sorption of uranyl ions on HDTMA-red clay in the presence of phosphates were characterized by thermal analysis. It was established on the basis of DTG curves of the sorption products and FTIR spectra of the gaseous phase of sorption products decomposition that the thermal stability of the mineral increased when P(V) ions were sorbed along with U(VI) ions, i.e., the temperature of defragmentation/oxidation of surfactant increased when going from U(VI)–HDTMA-clay to U(VI)–P(V)–HDTMA-clay to P(V)–HDTMA-clay. The DSC curves of the sorption products showed that defragmentation/oxidation was an exothermic process and dehydration and dehydroxylation had an endothermic character. The investigated sorption system has practical importance, since an evident increase in U(VI) sorption over the entire pH range is observed when going from U(VI)–HDTMA-clay to U(VI)–P(V)–HDTMA-clay.

     

Thermal decomposition of RDX/AP by TG–DSC–MS–FTIR

The method of TG–DSC–MS–FTIR simultaneous analysis has been used to study the thermal decomposition mechanism of the RDX/AP (1/2) mixture. TG–DSC showed that there were two mass loss processes for thermal decomposition of RDX/AP. The first one was mainly ascribed to the thermal decomposition of RDX. Addition of AP to RDX causes decomposition to take place abruptly, after melting, resulting in a very sharp and strong peak at lower temperature. The apparent activation energies, calculated by model-free Friedman method, of this process were negative. The second mass loss process of RDX/AP was confirmed to be the thermal decomposition of AP, catalyzed by RDX. This process can be divided into three stages, which were an nth-order autocatalytic and two one-dimensional diffusion stages, respectively. There was a competition among the formation reactions of N₂O, HNCO, and HCl for the first stage and between NO₂ and N₂O for the later two stages. The production of N₂O dominated in the second stage, while NO₂ did in the third stage.     

Thermal investigation of heavy crude oil by simultaneous TG–DSC–FTIR and EDXRF

Present study investigates thermal behavior of two heavy crude oils with different °API values by simultaneous thermogravimetry–differential scanning calorimetry–fourier transform infrared spectroscopy (TG–DSC–FTIR), and an evaluation of the chemical element levels present in the oils’ ashes was done by energy dispersive X-ray fluorescence spectrometry. TG and DSC curves were obtained for two samples in nitrogen atmosphere. Among all inorganic components evaluated, the highest concentration in the two oils was SO₃. Thus this study may contribute to a better understanding of the thermal behavior of heavy crude oils and their composition.     

TG–DSC–FTIR–MS study of gaseous compounds evolved during thermal decomposition of styrene-butadiene rubber

The thermal decomposition behavior of styrene-butadiene rubber was studied using a system equipped with thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, and mass spectroscopy. Two different experiments were conducted. From these experiments, thermogravimetric analysis results indicated a mass loss of 58 % in the temperature range of ~290–480 °C and a mass loss of 39 % in the temperature range beyond 600 °C. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed the presence of oxides, even at 1,000 °C, accounting for the Zn, Mg, Al, Si, and Ca in the original sample.     

Study on thermal decomposition of polymers by simultaneous measurement of TG–DTA and miniature ion trap mass spectrometry equipped with skimmer-type interface

Simultaneous thermogravimetry–differential thermal analysis and miniature ion trap mass spectrometry (TG–DTA–ITMS) instrument equipped with a skimmer-type interface has been successfully developed. The system allows precise real-time monitoring analysis of activated organic compounds such as pyrolysates because gaseous transformation of the evolved gases from the TG–DTA is suppressed by the skimmer-type interface. Also, excessive fragmentation during ionization of molecules can be avoided with the soft ionization method by photoionization. In addition, the miniaturized ITMS is equipped with unique tandem MS capability. These features permit a better understanding of the complicated thermal behavior and the precise pyrolysates of materials. The pyrolysis of various standard reagent polymers such as polymethyl methacrylate, polystyrene, and polyphenylene sulfide has been examined by the TG–DTA–ITMS in inert atmosphere. The synergy effect of the skimmer-type interface and the ITMS was evaluated comparatively with conventional quadrupole mass spectrometry results. It was confirmed that the real-time monitoring ITMS/MS worked satisfactorily. Here, we demonstrate a valuable application of the TG–DTA–ITMS in the detailed analysis of commercial polymers.     

Study of the MS response by TG–MS in an acid mine drainage efflorescence

The aim of this study is to employ a thermogravimetric analyzer coupled to a mass spectrometer to research into the influence of heating rate and sample mass on the response of the detector. That response is examined by means of a particular efflorescence taken from an acid mine drainage environment. This mixture of weathered products is mainly composed by secondary sulfate minerals, which are formed in evaporation conditions, appearing as efflorescence salts. Thermogravimetry coupled to mass spectrometry has been used to analyze the three main loss steps that happen when this combination of minerals is heated from 30 to 1,100 °C. This inorganic material is based on a mixture of hexahydrite, zinc sulfate hexahydrate, apjonite, gypsum, plumbojarosite, calcite, quartz, and magnetite. While heating, three main effluent gases evolved from this efflorescence. At a standard heating rate of 10 °C/min, loss of water (dehydration) occurred over 30–500 °C in four major steps, loss of carbon dioxide (decarbonisation) occurred over 200–800 °C in three steps, and loss of sulfur trioxide (desulfation) occurred over 400–1,100 °C in three steps. According to the results, thermal analysis is an excellent technique for the study of decomposition in these systems.     

Synergetic effect of poly(vinyl butyral) and calcium carbonate on thermal stability of poly(vinyl chloride) nanocomposites investigated by TG–FTIR–MS

In order to improve poly(vinyl chloride) (PVC) thermal stability, poly(vinyl butyral) (PVB) matrix and calcium carbonate nanoparticles were incorporated in plasticized PVC. Thermal properties of these composites were investigated by thermogravimetry analysis coupled with mass spectrometry and Fourier transform infrared spectroscopy (FTIR). This approach highlighted the efficiency of both PVB and CaCO₃ as HCl scavengers by postponing both the onset degradation temperature and the HCl release. Moreover, a synergetic effect was evidenced regarding the HCl release. Finally, kinetic parameters of the PVC first degradation stage, determined using the Flynn–Wall–Ozawa’s method, revealed a significant increase of the activation energy by incorporation of CaCO₃ in the presence or not of PVB.     

Investigation on the thermal decomposition and flame retardancy of wood treated with a series of molybdates by TG–MS

A flame-retardant wood was prepared using a series of insoluble molybdates through the double bath technique. The flame retardancy of the wood samples was studied with the limiting oxygen index (LOI) method. The relationships between the flame-retardant performance and the thermal property of wood were studied by the thermogravimetry (TG), derivative thermogravimetry (DTG), differential thermal analysis (DTA), scanning electron microscopy (SEM), and the thermogravimetry–mass spectrometry (TG–MS) analysis methods. The results showed that the insoluble molybdates, which were precipitated into the wood by the double bath technique, can obviously improve the flame retardancy of wood. Similarly, the transition metal molybdates showed higher flame-retardant efficiency than the main group metal molybdates do, which probably due to the thermal barrier effect that Fe₂(MoO₄)₃ acts during the combustion of the samples. At the same time, Fe₂(MoO₄)₃ catalyzed the dehydration and carbonization reactions of wood, and caused an increase in the amount of char produced, and an improvement of the stability of the char residue. Moreover, the mass spectrometry results indicated that the excess transition metal ions speed up the deep decomposition of the char residue, and resulting in the smoldering of wood.     

Kinetics of coal and char oxycombustion studied by TG–FTIR

Coal and char oxycombustion is a complex process because of very high reaction rate of oxygen with coals and chars carbon. Very important process during oxycombustion is diffusion of O₂ to surface of coal and char grain. This process can be minimized using small samples and high flow of the gas, but it is also dependent on temperature. For this reason, it is impossible to eliminate diffusion processes which cause significant impact on calculated kinetic parameters. This paper describes the results of thermogravimetric studies of oxycombustion process with evolved gas analysis by FTIR. Ultimate and proximate analysis of coal and char were made. Thermogravimetric experiments of coal and its char oxycombustion were conducted using five heating rates, namely 2.5, 5, 10, 20 and 40 K min^?1, and gas mixture composed of 20 % O₂ in CO₂. Activation energies of coal and char oxycombustion were calculated by isoconversional methods: integral Vyazovkin and differential Friedman. Activation energies for three ranges of heating rates were calculated. This paper shows influence of heating rate on calculated activation energy. The reason of this phenomenon is due to change of the mechanism of coal and char oxycombustion from the chemical kinetic control regime to mixed chemical kinetic–diffusion control regime.     

Simultaneous TG/DTG–DSC–FTIR characterization of collagen in inert and oxidative atmospheres

In this paper, a TG/DTG–DSC–FTIR study of type I collagen extracted from bovine Achilles tendon both in inert (nitrogen) and oxidative atmosphere (synthetic air and oxygen) from room temperature to 700 °C was performed. The thermal analysis results have shown that after initial dehydration, collagen exhibits a single decomposition step in nitrogen (due to pyrolysis), while in air and oxygen two steps are observed due to thermo-oxidative decomposition, the latter being highly exothermic. The CO₂ bands dominate the FTIR spectra of evolved gases in all atmospheres (especially in air and oxygen), along with the characteristic bands of ammonia, water, HNCO, methane. In nitrogen, the bands of pyrrole, HCN, and ethane were also identified, while in oxidative atmospheres, nitrogen oxides and CO are released. A study was also performed by comparing the DTG and gas evolution curves observed for the three atmospheres.     

Activation energy in the thermal decomposition of MgH2 powders by coupled TG–MS measurements

The thermal desorption of hydrogen from commercial MgH₂ powders was investigated by coupled thermogravimetry and mass spectroscopy (TG–MS). The analysis of the evolved gas species gives a detailed picture of the composition of the initial specimen and of its thermal decomposition: just before the H₂ release from MgH₂, additional H₂O and CO₂ are detected, sensing the presence of MgCO₃ and Mg(OH)₂ in the initial specimen. Measurements done at different heating rates allowed the determination of apparent activation energies for the whole thermal process. Moreover, by considering appropriate ion current signals of the MS data, the activation energies of the single chemical reactions, leading to the formation of H₂O, CO₂, and H₂, were obtained. Differences coming from the choice of the (model-free isoconversion) method of analysis (Kissinger–Akahira–Sunose; Flynn–Wall–Ozawa; Starink; Friedman equations) are evidenced and discussed.     

Effect of different nanoparticles on thermal decomposition of poly(propylene sebacate)/nanocomposites: Evaluation of mechanisms using TGA and TG–FTIR–GC/MS

In the present study poly(propylene sebacate) (PPSeb) nanocomposites containing 2 wt% of fumed silica nanoparticles (SiO₂) or multiwalled carbon nanotubes (MWCNTs), or montmorillonite (MMT) were prepared by in situ polymerization. The thermal degradation of nanocomposites was studied using thermogravimetric analysis (TGA). It was found that the addition of MWCNTs and MMT enhances the thermal stability of the polymer, while SiO₂ nanoparticles do not affect it. From the variation of the activation energy (E) with increasing degree of conversion it was found that the decomposition of nanocomposites proceeded with a complex reaction mechanism with the participation of at least two different steps. To evaluate the thermal decomposition mechanisms and mainly the effect of nanoparticles on the thermal decomposition of PPSeb, TGA/FTIR and a combination of TG-gas chromatography–mass spectrometry (TG/GC–MS) were used. From mass ions detection of the formed decomposition compounds it was found that the decomposition of PPSeb and its nanocomposites, takes place mainly through β-hydrogen bond scission and, secondarily, through α-hydrogen bond scission. The main decomposition products were aldehydes, alcohols, allyl, diallyl, and carboxylic acids.     

Monitoring of N-doped organic xerogels pyrolysis by TG–MS

Pyrolysis of N-doped organic xerogels prepared from different N-containing precursors has been studied by TG–MS. The pyrolytic process has been ascertained to consist of three steps. The first step (up to cca. 250 °C) has been interpreted as water loss (humidity, fixed water from pores) and in some cases as formaldehyde loss. The second step has been connected with volatile substances evolution (cca. 250–450 °C) with predominant release of NH₃, CO₂ and products of melamine (M) or urea decomposition. Reaction/pore water and formaldehyde have also been detected in this step. The third step of pyrolysis (450–1,000 °C) has been ascribed to carbonization reaction when the other releases of NH₃, CO₂, reaction/pore water and M decomposition products have continued. This was accompanied with evolution of H₂ and 3-hydroxypyridine. On the basis of TG measurements, it was found that increasing time of condensation of organic xerogels and amount of used catalyst lead to higher yield of carbonaceous products. In addition, adsorption experiments of Pb(II) on N-doped carbon xerogels proved that relationship between adsorption properties of xerogels and nitrogen loss during pyrolysis exists. When the sample contains only amino groups, they are lost during pyrolysis as ammonia and the adsorption ability is low, while nitrogen comprised in the aromatic rings of N-precursors stays in the structure and causes enlarging of adsorption capacity.     

TG–FTIR analysis applied to the study of thermal behaviour of some edible mushrooms

The article is devoted to the study on the thermal behaviour of three species of edible mushrooms: Boletus edulis (foot and cap), Pleurotus ostreatus (foot and cap), Lactarius deterrimus (cap) by the TG–FTIR-coupled technique, in air, over the 30–900 °C temperature range. The analysis of the TG–DTG–DTA curves reveals the thermal degradation mechanism to be complex and specific to every species under the recording conditions applied. A similar degradation mechanism is noticed for the foot and cap of Pleurotus ostreatus in comparison with the Boletus edulis and Lactarius deterrimus species where the mechanisms are different. The TG–FTIR analysis, combustion heats and IR spectra of the starting samples also support these results. The initial degradation temperatures from TG–DTG indicate the temperature range where these species are thermally stable and their nutrient features maintained making them proper for food. The TG–FTIR analysis gives information on the gaseous species evolved by the thermal degradation bringing thus a contribution to the elucidation of the changes developing by processing the edible mushrooms (industrialization, conservation, culinary preparations, etc.) at temperatures above the initial degradation temperature. At the same time, the environmental impact, when the mushroom failed cultures are burned, is also important.     

Luminescence and thermal behavior by simultaneous TG/DTG–DTA coupled with MS of neutral copper (I) complexes with heterocyclic thiones

Copper(I) halide complexes formulated as [(L)CuX(μ₂-L)₂CuX(L)] (X = Cl, Br and L = pyridine-2-thione (py2SH), or 4,6-dimethylpyrimidine-2-thione (dmpymtH)) were prepared, and their photoluminescence and thermal properties were investigated. The complexes are strongly emissive in the solid state, with the emissions being dominated by large Stokes shifts (>200 nm), which are depending on both the heterocyclic thione and the nature of the halogen. These emissions can be assigned to MLCT with some mixing of the halide-to-ligand (XL) CT characters. Simultaneous TG/DTG–DTA technique, coupled with MS for the analysis of the gaseous decomposition products, was used for two complexes with the dmpymtH ligand to determine their thermal degradation, which was found to be very complicated. In inert atmosphere the residues at 1,000 °C (verified with PXRD) were a mixture of Cu₂S and CuX, while at 1,300 °C a mixture of Cu₂S and Cu. In oxygen atmosphere the residues were CuO.     

TG–MS–FTIR (evolved gas analysis) of kaolinite–urea intercalation complex

The products evolved during the thermal decomposition of kaolinite–urea intercalation complex were studied by using TG–FTIR–MS technique. The main gases and volatile products released during the thermal decomposition of kaolinite–urea intercalation complex are ammonia (NH₃), water (H₂O), cyanic acid (HNCO), carbon dioxide (CO₂), nitric acid (HNO₃), and biuret ((H₂NCO)₂NH). The results showed that the evolved products obtained were mainly divided into two processes: (1) the main evolved products CO₂, H₂O, NH₃, HNCO are mainly released at the temperature between 200 and 450 °C with a maximum at 355 °C; (2) up to 600 °C, the main evolved products are H₂O and CO₂ with a maximum at 575 °C. It is concluded that the thermal decomposition of the kaolinite–urea intercalation complex includes two stages: (a) thermal decomposition of urea in the intercalation complex takes place in four steps up to 450 °C; (b) the dehydroxylation of kaolinite and thermal decomposition of residual urea occurs between 500 and 600 °C with a maximum at 575 °C. The mass spectrometric analysis results are in good agreement with the infrared spectroscopic analysis of the evolved gases. These results give the evidence on the thermal decomposition products and make all explanation have the sufficient evidence. Therefore, TG–MS–IR is a powerful tool for the investigation of gas evolution from the thermal decomposition of materials and its intercalation complexes.     

Thermal characterization and compounds identification of commercial Stevia rebaudiana Bertoni sweeteners and thermal degradation products at high temperatures by TG–DSC,IR and LC–MS/MS

Journal of Thermal Analysis and Calorimetry - The thermal behavior of two commercially available sweeteners based on Stevia rebaudiana Bertoni was studied by TG–DSC and EGA. The composition...