Synthesis and characterization of Co(OH)<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanotube composites as supercapacitor materials

A novel composite of Co(OH)₂ and TiO₂ nanotubes was synthesized by a chemical precipitation method. Co(OH)₂/TiO₂ nanotube composites and its microstructure were characterized by transmission electron microscopy (TEM), X-ray diffraction pattern (XRD). The electrochemical capacitance performance of this composite was investigated by cyclic voltammetry and charge–discharge tests with a three-electrode system in 6 M KOH solution. We synthesized different weight ratios of Co(OH)₂/TiO₂ nanotubes, a maximum specific capacitance of 229 F/g was obtained for the composite. Based on these tests, we propose that TiO₂ nanotubes provide the three-dimensional nanotube network structure for the composite and make the Co(OH)₂ dispersed. For these reasons, the TiO₂ nanotubes used as a framework for Co(OH)₂ improve the utilization of Co(OH)₂ greatly.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Polymorphism and thermal decomposition of [Ni(DMSO)<Subscript>4</Subscript>]I<Subscript>2</Subscript>

Tetrakis(dimethyl sulphoxide)nickel(II) bis(iodide) was studied by thermogravimetry (TG) and simultaneous differential thermal analysis (SDTA) and differential scanning calorimetry (DSC). The gaseous products of the decomposition were on-line identified by a quadrupole mass spectrometer (QMS). Thermal decomposition of the title compound proceeds in three main stages. In the first stage, which starts just above ca. 419 K, the compound loses two dimethyl sulphoxide (DMSO) molecules per one formula unit and small amount of iodide ion. In the second stage (464–552 K) the next DMSO ligands and the iodide ion simultaneously are released. In the last stage (552–900 K) NiSO4 is created which next decomposes to NiO and SO₃.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

TiO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> binary xerogels: Synthesis and characterization

Silica/titania binary xerogels were prepared by joint hydrolysis of the ingredients. Gels of various compositions were characterized by ¹H NMR spectroscopy, IR spectroscopy, and thermogravimetry. The spectral characteristics of binary systems differ considerably from mere superposition of the spectra of the two constituent compounds and the spectrum of a mechanical mixture. A feasibility was demonstrated for controlling the acid properties of binary oxide gels via varying the component mole ratio.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

Synthesis of nanocrystalline ZnO by the thermal decomposition of [Zn(H<Subscript>2</Subscript>O)(O<Subscript>2</Subscript>C<Subscript>5</Subscript>H<Subscript>7</Subscript>)<Subscript>2</Subscript>] in isoamyl alcohol

It was studied how the conditions of heat treatment of a [Zn(H₂O)(O₂C₅H₇)₂] solution in isoamyl alcohol at 120–140°C for 2–60 min affect the precursor decomposition mechanism and the characteristics of the obtained nanocrystalline zinc oxide. In all the cases, the product was a crystalline substance with the wurtzite structure and a size of crystallites of 14–18 nm, which was independent of the synthesis conditions. The thermal behavior and microstructure of the separated and dried nanostructured ZnO powder were investigated. It was determined how the duration and temperature of the heat treatment of the precursor solution affects the microstructure of ZnO coatings dip-coated onto glass substrates using dispersions produced at 120 and 140°C. The nanosized ZnO application procedure was shown to be promising for creating a gas-sensing layer of chemical gas sensors for detecting 1% H₂ (\(R_0 /R_{H_2 } \) was 58 ± 2 at an operating temperature of 300°C) and 4 ppm NO₂ (\(R_{NO_2 } /R_0\) were 15 ± 1 and 1.9 ± 0.1 at operating temperatures of 200 and 300°C, respectively).     

Preparation and radioluminescent characteristics of Li<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaF<Subscript>2</Subscript> glasses doped with Ce(III) and Gd(III)

A method has been developed for the preparation of homogeneous moisture-resistant glasses with the composition Li₂O-B₂O₃-P₂O₅-CaF₂ : Ce³⁺-Gd³⁺. Energy transfer from Gd³⁺ to Ce³⁺ was noted in a study of the radioluminescence spectra of these samples using ²⁴¹Am as the excitation source (60 keV). The decay time of the Ce³⁺ radioluminescence in the glasses obtained was 20-25 ns.     

Synthesis and thermal decomposition of potassium peroxotitanate to K2Ti2O5

Potassium peroxotitanate was synthesized by the peroxo method. During the thermal decomposition K₂Ti₂O₅ can be obtained. The isothermal conditions for decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O were determined on the base of DTA, TG and DSC results. DTA and TG curves were recorded in the temperature range 20 and 900°C at a heating rate of 10°C min^–1. The obtained intermediate compounds were characterized by means of quantitative analysis and IR spectroscopy. The mechanism of thermal decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O to K₂Ti₂O₅ was studied. The optimal conditions for obtaining K₂Ti₂O₅ were determined (770°C for 10 h).     

Synthesis,crystal structure,and thermal decomposition kinetics of complex [Nd(BA)<Subscript>3</Subscript>bipy]<Subscript>2</Subscript>

The complex of [Nd(BA)₃bipy]₂ (BA = benzoic acid; bipy = 2,2′-bipyridine) has been synthesized and characterized by elemental analysis, IR spectra, single crystal X-ray diffraction, and TG/DTG techniques. The crystal is monoclinic with space group P2(1)/n. The two–eight coordinated Nd³⁺ ions are linked together by four bridged BA ligands and each Nd³⁺ ion is further bonded to one chelated bidentate BA ligand and one 2,2′-bipyridine molecule. The thermal decomposition process of the title complex was discussed by TG/DTG and IR techniques. The non-isothermal kinetics was investigated by using double equal-double step method. The kinetic equation for the first stage can be expressed as dα/dt = A exp(−E/RT)(1 − α). The thermodynamic parameters (ΔH ^≠, ΔG ^≠, and ΔS ^≠) and kinetic parameters (activation energy E and pre-exponential factor A) were also calculated.     

Solubility of Eu<Subscript>2</Subscript>(SeO<Subscript>3</Subscript>)<Subscript>3</Subscript> and sorption of Eu(III) onto TiO<Subscript>2</Subscript> in the presence of Se(IV)

Metal ions sorption can be significantly affected by the presence of other sorbates, especially of complexing ligands. In this study, the effect of Se(IV) on Eu(III) sorption onto TiO₂ at different pH and Eu(III) concentration was investigated. Se(IV) was found to enhance Eu(III) sorption as a function of Se(IV) concentration. Constant capacitance model was successfully used to interpret the sorption experimental data. The solubility product of Eu₂(SeO₃)₃ at ambient temperature was investigated to highlight the sorption mechanism of ternary sorption system. The pK _sp value of Eu₂(SeO₃)₃ was found to be 31.51 ± 0.95.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Iron(II) complexes [Fe(DfgH)<Subscript>2</Subscript>(3-CONH<Subscript>2</Subscript>-Py)<Subscript>2</Subscript>] and [Fe(DfgH)<Subscript>2</Subscript>(4-COOC<Subscript>2</Subscript>H<Subscript>5</Subscript>-Py)<Subscript>2</Subscript>]: Synthesis and structures

The complexes [Fe(DfgH)₂(3-CONH₂-Py)₂] (I) and [Fe(DfgH)₂(4-COOC₂H₅-Py)₂] (II), where DfgH₂ is α-benzyl dioxime, were obtained and examined by X-ray diffraction analysis. The equatorial planes of the coordination octahedra of the metal ions consist of two monodeprotonated α-benzyl dioxime residues united through intramolecular hydrogen bonds O-H…O into a pseudomacrocyclic system. The neutral molecules 3-CONH₂-Py and 4-COOC₂H₅-Py are coordinated to the Fe²⁺ ion through the N atom of the heterocycle. Structure I is layered and structure II is molecular. Intermolecular interactions N-H…O are responsible for the formation of layers in crystal structure I.     

TiO<Subscript>2</Subscript> Photocatalytic Oxidation: III. Gas-Phase Reactors

A number of reactor designs for photocatalytic oxidation in the gas phase are considered: cylindrical reactors with photocatalysts supported by various techniques, a reactor with a vibrationally fluidized bed of a photocatalyst, and a coil reactor with the reactivation of a photocatalyst at regular intervals. It was found that the vibrational fluidization of catalyst grains enhanced catalyst activity because of the effect of periodic illumination of different grain sides. The results of testing of two types of domestic photocatalytic air purifiers commercially manufactured in Russia are reported.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 466–473.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

Photooxidation of Ethylbenzene with TiO<Subscript>2</Subscript> and Metal Coated TiO<Subscript>2</Subscript> and its Kinetics

Summary. Photooxidation of ethylbenzene with oxygen to give ethylbenzene hydroperoxide has been achieved in a stirred photochemical reactor that was cooled by a water system by irradiation with a 400W high-pressure mercury lamp and using TiO₂ powder and metal coated TiO₂. The effects of the amount of copper or silver coated on TiO₂ and of the temperature on the rate of oxidation have been investigated. It is suggested that thermal cleavage of the O–O bond and photochemically generated singlet oxygen should be considered as the initiating step in a radical chain mechanism. An optimum loading of 6% Ag or 4–5% Cu was observed for photooxidation of ethylbenzene.     

Interactions in the Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript>-Ti<Subscript>2</Subscript>O<Subscript>3</Subscript> System

Interactions in the Al₂TiO₅-Ti₂O₃ system were studied and the regions of existence of Al_2?2xTi _2x ³⁺ Ti⁴⁺O₅ solid solutions with a pseudobrookite structure were determined.     

Adsorption of NO,NH<Subscript>3</Subscript> and H<Subscript>2</Subscript>O on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The adsorption of small molecules NO, NH₃ and H₂O on V₂O₅/TiO₂ catalysts is studied with the semiempirical SCF MO method MSINDO as pre-stage for the selective catalytic reduction of NO. The mixed catalyst is represented by hydrogen-terminated cluster models. The local arrangement of the cluster atoms is in accordance with available experimental information. Partial relaxation of cluster atoms near the adsorption sites is taken into account. Calculated adsorption energies are compared with experimental literature data. Rapid convergence of computed properties with cluster size is observed. A possible reaction mechanism for the catalytic reduction of NO with NH₃ and O₂ is outlined.     

The effect of specific surface area of TiO<Subscript>2</Subscript> on the thermal decomposition of ammonium perchlorate

The thermal decomposition of ammonium perchlorate (AP) is considered to be the first step in the combustion of AP-based composite propellants. In this report, the effect of the specific surface area of titanium oxide (TiO₂) catalysts on the thermal decomposition characteristics of AP was examined with a series of thermal analysis experiments. It was clear that the thermal decomposition temperature of AP decreased when the specific surface area of TiO₂ increased. It was also possible that TiO₂ influences the frequency factor of AP decomposition because there was no observable effect on the activation energy.     

Coefficients of thermal expansion of KPb<Subscript>2</Subscript>Cl<Subscript>5</Subscript> and RbPb<Subscript>2</Subscript>Br<Subscript>5</Subscript> crystals

The temperature dependence of unit cell parameters for monoclinic KPb₂Cl₅ and tetragonal RbPb₂Br₅ crystals was studied in the range of 100–298 K. Linear and volume thermal expansion coefficients were determined.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.