Characterization of methylated nanoscale MCM-41 material

In this study, nanoscale MCM-41 molecular sieve was prepared under a basic condition by a hydrothermal method using cetyltrimethylammonium bromide as a template and tetraethyl orthosilicate as a silica source. Methylated nanoscale MCM-41 molecular sieve was prepared from the nanoscale MCM-41 by post-synthesis method using trimethylchlorosilane (TMCS) as coupling agent. The product was characterized by means of element analysis, powder X-ray diffraction, Fourier transform infrared (FT-IR) spectroscopy, low-temperature nitrogen adsorption-desorption technique at 77 K, scanning electron microscopic (SEM), thermogravimetry-differential thermal analysis (TG-DTA). Powder XRD showed that the framework of the molecular sieve was well retained and the degree of ordering of the methylated MCM-41 decreases. IR spectra and the low-temperature nitrogen adsorption-desorption technique suggested that methyl was successfully grafted to the inner surface of the methylated MCM-41 and the mesoporous channels of the methylated MCM-41 were still maintained. Scanning electron microscopic results showed that the average size of the methylated MCM-41 prepared was 112 nm. Differential thermal analysis showed that the prepared material has preferable thermal stability and the methylated MCM-41 can be stable at 903 °C.     

脂溶性金属酞菁衍生物在介孔分子筛中的封装及其催化性质研究

采用浸法将钴酞菁衍生物组装进入介孔分子筛MCM－41中,通过XRD、UV－Vis紫外漫反射光谱,热分析、Raman光谱和N2吸附等方法对组装体进行了表征,并研究了共对硫醇氧化性能,结果表明,与体相钴酞菁衍生物相比,组装体具有优良的催化性能。     

Photoluminescence study of mesoporous MCM-41 and Ti-grafted MCM-41

Photoluminescence combined with diffuse reflectance UV—Vis spectroscopy was used to characterise both the pure siliceous MCM-41 and Ti-MCM-41 containing tetrahedral Ti(IV) species anchored onto the inner walls of the siliceous MCM-41. Both Ti-MCM-41 and MCM-41 showed complex photoemission signals and this study allows, for the first time, the distinction of the emission signals of tetrahedral Ti9IV) ions from those due to silica surface centres.     

Spherical MCM-41 as support material in enantioselective HPLC

Spherical MCM-41 particles covalently linked with (R)-naphthylethylamine as selector are reported as a new chiral stationary phase for HPLC and show excellent resolution and efficiency in combination with low inlet pressures.     

Kinetic study of template removal of MCM-41 nanostructured material

The siliceous MCM-41 molecular sieve was synthesized starting from a hydrogel with the following molar composition: 4.58SiO₂:0.437Na₂O:1CTMABr:200H₂O. The cetyltetramethylammonium bromide (CTMABr) was used as structure template. A kinetic study of template removal after the syntheses was performed by Vyazovkin model-free kinetic method obtaining apparent activation energy of 166±8.2 kJ mol^-1. This revised version was published online in August 2006 with corrections to the Cover Date.     

Encapsulation and Fluorescence of the Functional Supramolecular Material Between MCM-41 and Rh6G

Molecular sieves encapsulated organic dyesand metal chelates have been reviewed[1 ],theluminescentbehaviorof someorganic compoundsin molecularsieveshasalso been studied[2 ,3].Rh6 G(Rhodamine6 G) isone kind of organicdye which iswidely used in many fieldssuch asoptics,spectroscopy and laser techniques.It has a high stability and an efficiency quantumyield as an excellent fluorescent compound.The mesoporous molecular sieve MCM- 41 pos-sesses advantageous absorption property.Itis conceivable t…     

MCM-41-罗丹明B超分子功能材料的组装及其发光

随着化学及高新技术的发展,一门新兴的边缘学科超分子化学和器件正在引起理论和实验化学家的广泛重视.超分子化学可定义为由多个分子通过分子间非键合作用而形成的复杂但有组织的体系.     

Formation Process of MCM-41 Precursor and Porous Texture of MCM-41

The formation process of the MCM-41 precursors (silicate/surfactant complex) was investigated on the basis of the pH titration curves of Na(4)SiO(4) in the presence of [C(16)H(33)N(CH(3))(3)]Cl. Measurements of the pH titration curves were carried out using the computer-controlled gravimetric titrator constructed in our laboratory. The white precipitate (MCM-41 precursor) was abruptly formed at pH 11.1 (298 K) and at pH 9.9 (343 K). Formation of the MCM-41 precursor can be explained by coagulation of the rod-like micelle colloids whose surface is covered by the condensed silicate anions of (HSiO(3))(n)(n-). The porous texture of the MCM-41 samples whose precursors were synthesized under different conditions was analyzed on the basis of the adsorption isotherms of nitrogen at 77 K. It has been shown that the MCM-41 sample whose precursor was prepared at pH 9.9 and 343 K shows one sharp peak (r(p) = 1.65 nm) in the pore size distribution curve, but the MCM-41 samples whose precursors were prepared at pH 6.5-5.0 and 343 K give two peaks (r(p) = 1.66 nm and r(p) = 2.12-2.36 nm). The appearance of the second peak (r(p) = 2.12-2.36 nm) has been considered to be in connection with the destruction of the MCM-41 precursor into small fragments in acidic medium. Copyright 2000 Academic Press.     

An Encapsulation of the Rare Earth Complex in Modified Mesoporous Molecular Sieve MCM-41

Rare earth (RE) organic complexes usually exhibit intense narrow band emission via anenergy transfer from the ligands to the central rare earth ions under UV excitation.Although RE complexes especially for the complex with 6-diketone, have strongluminescence, their photostability and thermal stability are not very good enough for thephosphor. Therefore, the key problem related to rare earth complex is to try to find asuitable matrix material to load them. Inorganic solid matrixes are promisi…     

Microwave absorption by nanostructural ferric oxide encapsulated within MCM-41

A new functional material with nonzero microwave absorption ability at zero applied magnetic field results from loading MCM-41 to a high percentage by weight with ferric oxide.     

Metastability of MCM-41 and Al-MCM-41

The apparent stability of MCM-41 and Al-MCM-41 in water was appraised in a series of solubility experiments. MCM-41 is a siliceous, mesoporous material of hexagonal symmetry and exceptionally high surface area first synthesized in 1992. The dissolution experiments were carried out at several solid/water ratios: 1/200, 1/100, and 1/75. Results indicated that MCM-41 and Al-MCM-41 are more soluble than amorphous silica at ambient temperatures. Using standard thermodynamic data, a minimum Gibbs free energy of formation of -847.9 kJ/mol for MCM-41 was calculated compared to -848.85 kJ/mol for amorphous silica and -856.3 kJ/mol for quartz. X-ray diffraction (XRD) analyses of recovered solids indicated a progressive loss of crystallinity in MCM-41 and Al-MCM-41 over the 79 day dissolution experiment. BET nitrogen surface area analyses of recovered solids revealed no appreciable change in the surface area of either material after 79 days of reaction in water. Field emission scanning electron microscope (SEM) images taken of the 79 day MCM-41 sample showed some degradation of the initial structure-fine, worm-like particles.     

Optical spectra of a novel polyoxometalate occluded within modified MCM-41

The novel polyoxometalate ([(Eu2PW10O38)4(W3O8(H2O)2(OH)4)]22-), also referred to herein as Eu8P4W43, has been immobilized inside the channels of MCM-41 mesoporous molecular sieve material by means of the incipient wetness method. For proper host-guest interaction, amine groups were introduced into the system as a result of an aminosilylation procedure. A stable and integrated Eu8P4W43 polyoxometalate was shown to be formed inside the channels of the modified MCM-41. The products were characterized by XRD, UV-vis absorption, emission, Raman excitation, Raman, and 31P solid-state NMR measurements. Infrared and Raman spectra of the polyoxometalate/MCM-41 composite systems are interpreted as showing spectral shifts due to site induced electrostatic interactions. The photoluminescent behavior of the composite at room temperature indicates a characteristic Eu3+ emission pattern corresponding to 5D0- 7F(J) transitions. A strong photoluminescence suggests the potential utility of the polyoxometalate as a luminescent material.     

MCM-41 mesoporous material modified carbon paste electrode for the determination of cardiac troponin I by anodic stripping voltammetry

An anodic stripping voltammetric method for the determination of cardiac troponin I (cTnI) at a MCM-41 mesoporous material modified carbon paste electrode (MCM-MCPE) was investigated. The test was based on the dual monoclonal antibody “sandwich” principle using colloidal gold as a labeled substrate. Four main steps were carried out to obtain the analytical signal, i.e. electrode preparation, immunoreaction, silver enhancement, and anodic stripping voltammetric detection. The anodic stripping peak current increased linearly with the concentration of cTnI over the range of 0.8-5.0 ng/ml. A detection limit of 0.5 ng/ml was obtained. The established method was applied to detect cTnI in acute myocardial infarction (AMI) samples using routine enzyme-linked immunoadsorbent assay (ELISA) for comparison analysis, and good results were obtained.     

Eu(TTA)_3/MCM-41介孔复合体的溶胶凝胶法组装

利用溶胶 凝胶法将稀土配合物Eu(TTA) 3 组装到MCM 41介孔分子筛的孔道中 ,并初步认定客体分子Eu(TTA) 3 是以加合物形式包裹于表面活性剂胶束中。该法制得的介孔复合体Eu(TTA) 3/MCM 41,用XRD、HRTEM技术证实具有短程有序的、规整的六方介孔结构和大小分布均匀的纳米晶粒。对其光致发光和荧光寿命的研究发现 :与乙醇溶液中相比 ,Eu3 的荧光寿命没有发生改变 ,但Stokes位移却明显增大 ;复合体中 ,能量是从主体MCM 41传递到客体Eu(TTA) 3 上。     

Cr/MCM-41催化剂的结构特征及其纳米尺寸孔内聚乙烯的形成

合成了纯硅MCM-41,并以浸渍法在表面负载烯烃聚合催化活性中心---过渡金属元素Cr;通过对所得Cr/MCM-41样品的结构特征及Cr物种的存在形成进行XRD,低温N2吸附,FTIR,Raman,^2^9SiNMR等表征发现,Cr/MCM-41具有良好的长程有序结构、较高的比表面积及均一的孔径分布。负载于MCM-41表面的Cr物种通过与羟基的相互作用分散于载体孔道内。Cr负载量较低时,Cr物种主要以孤立态存在,随着Cr含量增加,出现聚合态的Cr物种。Cr/MCM-41的一维孔道内,不仅可进行乙烯的聚合形成聚乙烯,而且反应后MCM-41的长程结构保持不变。     

An overview of studies on the highly dispersed uranium oxide species occluded within mesoporous MCM-41 and MCM-48 host materials

In this article we have consolidated our recent studies on anchoring of uranyl groups and encapsulation of highly dispersed nano-particles of -U₃O₈ in mesoporous MCM samples. The size of uranium oxide crystallites and the binding of uranyl groups at framework sites of host matrix depended on the preparation method, viz. wet impregnation, exchange of template cations, and the hydrothermal route. These uranium species contributed individually to the catalytic oxidation of organic molecules, such as methanol, toluene and benzyl alcohol; the uranyl groups playing a more important role at lower reaction temperatures. Also, the size and the lattice oxygen of uranium oxide crystallites played a vital role, not only in the lowering of reaction onset temperature but also in deciding the nature and the reactivity of the transient surface species formed during the oxidation of above mentioned organics. For instance, the results of in situ IR spectroscopy experiments have shown that while larger-size U₃O₈ crystallites help in the growth of certain oxymethylene (–OCH₂) and polymerized oxymethylene (–OCH₂)_n species, adsorption of methanol on smaller size particles helped in the additional formation of formate-type complexes. Thus, a relationship was found between the size of uranium oxide crystallites, the nature of the transient species formed and the catalytic conversion of methanol to form CO₂, CO and methane. In addition, the uranyl ions anchored within the pore system of host matrix are found to serve as efficient heterogeneous photocatalysts for the sunlight-assisted deep oxidation of organic molecules in the vapor phase and at room temperature. The reaction mechanisms, accounting for the catalytic properties of occluded UO_x species without and in the presence of radiation, are discussed in the light of the above mentioned results.     

Preparation, characterization and optical properties of lanthanum-(nanometer MCM-41) composite material

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nanocomposite materials were characterized by means of powder X-ray diffraction, spectrophotometric anaylsis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered mesoporous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric anaylsis indicates that lanthanum exists in the prepared nanocomposite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nanocomposite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locates in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence.     

Adsorption of 2-methylbenzoic acid onto MCM-41 mesoporous material: kinetics and equilibrium studies

Ordered mesoporous molecular sieves are widely studied as alternative materials in areas where sorptive and catalytic applications are required. MCM-41 type mesoporous material was tested as sorbent of 2-methylbenzoic acid (MBA), an aromatic carboxylic acid selected as model molecule for adsorption studies on mesoporous silicas. Adsorption kinetic studies of MBA on MCM-41 type materials were carried out using ethanol solutions at different MBA concentrations. Experimental results followed Langmuir isotherm model showing large adsorption capacity (3.5?g/g). Two kinetic models, the pseudo first- and second-order, were selected to describe the adsorption process and to determine the best model fitting with the experimental data. Kinetic parameters for each kinetic equation were calculated and discussed. It was shown that the MBA adsorption process onto MCM-41 material could be described by the pseudo-second-order equation and that the MCM-41 performs as a suitable adsorbent material.     

NMR study of the adsorption-desorption kinetics of dissolved tetraalanine in MCM-41 mesoporous material

In this study we show how deuterium magic-angle spinning NMR spectroscopy can be used to investigate the adsorption-desorption kinetics of molecules in solution at surface-liquid interfaces. An aqueous solution of deuterium-labeled tetraalanine is inserted in the pores of MCM-41 mesoporous material, and its 2H MAS NMR spectrum is measured as a function of temperature and fraction of filling of the pores. Prior to this study, the different types of water in MCM-41 are characterized as a function of water loading of the pores. Analysis of 2H MAS sideband line shapes enabled the determination of the adsorption and desorption rates and the activation energies of desorption.     

Synthesis and Characterization of Ce-Containing MCM-41

SUMMARY. The cerium-containing MCM-41 (Ce-MCM-41) has been synthesized with size in the micrometer range by direct hydrothermal method. Transmission electron microscopy shows the regular hexagonal array of uniform channel characteristics of MCM-41. Five peaks were detected in the lov-angle XRD patterns,an interplanar spacing d100 = 40.6 A was obtained that can be indexed on a hexagonal unit cell with a0 = 46.9 A. Nitrogen adsorption isotherm at 77 K revealed a surface area of 920 m2/g, pore size of 26.2 A and wall thickness of 18.1 A. A cell contraction of 2.6 A upon calcination was observed. The spectroscopic studies indicate that the synthesized sample is with MCM-41 structure and Ce is in the framework position. A weak Lewis acidity was indicated by infrared spectra of pyridine adsorption. The synthesized Ce-MCM-41 exhibits fairly catalytic activity for the NO reduction by CO.