Effect of nitrile butadiene rubber/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/YSZ fillers for PMMA denture base on the thermal and mechanical properties

This study is to investigate the effect of nitrile butadiene rubber (NBR as impact modifier) together with Al₂O₃/YSZ (toughening) as filler loading in PMMA denture base on the thermal and mechanical properties. PMMA matrix without fillers was mixed between PMMA powder and 0.5 mass% of BPO, and it is used as the control group. The liquid components consist of 90% of methyl methacrylate (MMA) and 10% as the cross-linking agent of ethylene glycol dimethacrylate. The denture base composites were fabricated by incorporating PMMA powder and BPO and fixed at 7.5 mass% NBR particles and filler loading (1, 3, 5, 7 and 10 mass%) of Al₂O₃/YSZ mixture filler by (1:1 ratio) as the powder components. The ceramic fillers were treated with silane (γ-MPS) and the powder/liquid ratio (P/L) according to dental laboratory practice. The TGA data obtained show that the PMMA composites have better thermal stability compared to unreinforced PMMA, while DSC curves show slightly similar Tg values. DSC results also indicated the presence of unreacted monomer content for both reinforced and unreinforced PMMA composites. The fracture toughness, Vickers hardness and flexural modulus values were statistically increased compared to the unreinforced PMMA matrix (P?<?0.05).     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Carbon nanofibers reinforced soy polyol-based polyurethane nanocomposites

Vapor-grown carbon nanofiber (CNF)-modified soy polyol-based polyurethane (PU) nanocomposites with different hydroxyl value of polyols (OH) were synthesized. The glass transition, thermal stability, mechanical properties, and morphology of the PU nanocomposites were characterized through differential scanning calorimetry, thermogravimetry, universal test machine, and scanning electron microscopy. The addition of CNFs increased the glass transition temperature as well as significantly improved tensile strength and Young’s modulus of PU nanocomposites. Meanwhile, thermal and mechanical properties of PU composites were influenced by the different hydroxyl value of polyols due to those different structures. In particular, in the case of 2 mass% CNF addition in PU derived from soy polyol with the OH number of 164 mg KOH g^?1, 20.8 °C improvement in the glass transition temperature, 115 % increment in tensile strength, and nearly eightfold increase in Young’s modulus were obtained.     

CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation using mixed matrix membrane-based polyurethane incorporated with ZIF-8 nanoparticles

This study presents using zeolitic imidazolate framework-8 (ZIF-8) as porous filler dispersed phase and polyurethane (PU) as continuous phase to synthesis mixed matrix membranes (MMMs). ZIF-8 nanoparticles were synthesized using centrifugal method. The synthesized nanoparticles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA). In order to investigate the effect of ZIF-8 loading on the membrane performance in CO₂/CH₄ separation, different membranes were prepared with various amounts of ZIF-8 (0–50 wt%). Membranes properties were characterized by SEM, XRD, TGA, differential scanning calorimetry (DSC), and tensile analysis. SEM images exhibit that the ZIF-8 is dispersed uniformly in cross section of membrane. Thermal stability of membranes increases with addition of the ZIF-8 nanoparticles into the polymer matrix. Both tensile strength and strain at break in the MMMs increase with the ZIF-8 loading. To study the effect of feed pressure on CO₂ and CH₄ transport properties of the membranes, single gas experiments were conducted at 4, 8, and 12 bar feed pressures. Incorporation of ZIF-8 crystals into continuous PU matrix resulted in high-performance gas separation membranes. Increasing feed pressure, significantly, increased separation performances in all the membranes.     

Thermal and mechanical characteristics of polyurethane/curaua fiber composites

Polyurethane composites reinforced with curaua fiber at 5, 10 and 20% mass/mass proportions were prepared by using the conventional melt-mixing method. The influence of curaua fibers on the thermal behavior and polymer cohesiveness in polyurethane matrix was evaluated by dynamic mechanical thermal analysis (DMTA) and by differential scanning calorimetry (DSC). This specific interaction between the fibers and the hard segment domain was influenced by the behavior of the storage modulus E′ and the loss modulus E″ curves. The polyurethane PU80 is much stiffer and resistant than the other composites at low temperatures up to 70°C. All samples were thermoplastic and presented a rubbery plateau over a wide temperature range above the glass transition temperature and a thermoplastic flow around 170°C.     

Heterostructured CoO/3D-TiO<Subscript>2</Subscript> nanorod arrays for photoelectrochemical water splitting hydrogen production

Homogeneous p-type cobalt (II) oxide (CoO) nanoparticles were successfully deposited on n-type three-dimensional branched TiO₂ nanorod arrays (3D-TiO₂) through photochemical deposition and thermal decomposition to form a novel CoO/3D-TiO₂ p-n heterojunction nanocomposite. Due to the narrow band gap of CoO nanoparticles (~2.4 eV), the as-synthesized CoO/3D-TiO₂ exhibited an excellent visible light absorption. The amounts of deposited CoO nanoparticles obviously influence the hydrogen production rate in the photoelectrochemical (PEC) water splitting. The as-synthesized CoO/3D-TiO₂-5 obtains the highest PEC hydrogen production rate of 0.54 mL h^?1 cm^?2 after five-time CoO deposition cycles (at a potential of 0.0 V vs Ag/AgCl). The photocurrent density of CoO/3D-TiO₂-5 is 1.68 mA cm^?1, which is ca. 2.5 times greater than that of pure 3D-TiO₂. The results showed that the formation of internal electrical-field between the CoO/3D-TiO₂ heterojunction, which has a direction from n-type TiO₂ to p-type CoO, facilitated the charge separation and transfer and resulted in a high efficiency and stable PEC activity.     

A Novel NiWS-TiO<Subscript>2</Subscript>(w) Catalyst Using NiWO<Subscript>4</Subscript> Nanoparticles as Precursor with Enhanced Hydrodesulfurization Activity

In this work, NiWO₄ nanoparticles were prepared by a novel simple method and loading on the mesoporous TiO₂ whiskers (TiO₂(w)) carrier as the precursor of NiWS. In addition, the NiWS-TiO₂(w) catalysts showing high hydrodesulfurization (HDS) activity is described. The structure and chemical composition of the as-prepared samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, temperature-programmed reduction, NH₃-temperature programmed desorption and transmission electron microscopy, respectively. Results indicate that smaller crystallite size and better dispersion of active NiWO₄ particles could be achieved by using TiO₂(w) as the support to disperse NiWO₄ nanoparticles. TiO₂(w) can also decrease the reduction temperature of Ni–W metal oxide and promote a highly sulfidation degree of Ni and W active sites. The obtained NiWS-TiO₂(w) catalysts show much higher dibenzothiop HDS activity than the unsupported NiWS catalyst, and the sulphur content of desulfurated oil can reach 20 ppm at the mild condition of 260 °C and 2 Mpa.     

Assessment of operating parameters for photocatalytic degradation of a textile dye by Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/clinoptilolite nanocatalyst using Taguchi experimental design

In the current study, a nanophotocatalyst doped with of TiO₂ and Fe₂O₃ nanoparticles supported on Iranian clinoptilolite was synthesized and characterized by XRD, XRF, SEM, and EDX analyses. The results suggested the successful loading of TiO₂ and Fe₂O₃ nanoparticles onto the surface of clinoptilolite. The SEM images confirmed the average size of nanoparticles deposited on zeolite, which was about 20–40 nm. Furthermore, application of the synthesized photocatalyst in photocatalytic degradation of Acid Black 172 dye was studied using the Taguchi method and the chosen parameters were as follows: pH (2–7), dye concentration (50–200 mg/l), irradiation time (30–120 min), and catalyst dosage (0.5–1.5 g/l). The results indicate that dye concentration, pH, and irradiation time are respectively the most effective factors in these experiments while with the minimum dosage of the catalyst (0.5 g/l), up to 90 % removal efficiency could be achieved. The optimum value for each parameter was pH = 2, dye concentration = 50 mg/l, catalyst dosage = 1 g/l and irradiation time = 60 min, and the dye removal efficiency reached up to 100 % at these optimal conditions. Furthermore, after five-times recycling and reusing the catalyst, the efficiency of the photocatalytic degradation was reduced from 91.5 to 65.9 %, which is still an acceptable value.     

MnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles with excellent catalytic activity in thermal decomposition of ammonium perchlorate

MnCo₂O₄ spinel nanoparticles (NPs) have been prepared using Aloe vera gel solution. The characterization of prepared spinel was performed applying Fourier transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, transmission electron spectroscope, scanning electron microscope and dynamic light scattering. The results manifested that the prepared nanoparticles were mainly spherical plus minor agglomeration with average size distribution between 35 and 60 nm. The catalytic activity of the prepared nanoparticles upon thermal degradation of ammonium perchlorate (AP) was evaluated applying differential scanning calorimetry and thermogravimetry instruments. MnCo₂O₄ nanoparticles increased the released heat of AP from 450 to 1480 J g^?1 and decreased the decomposition temperature from 420 to 293 °C. The kinetic parameters obtained from Kissinger methods showed that the activation energy of AP thermal decomposition in the presence of MnCo₂O₄ NPs considerably decreased. Also, a mechanism has been proposed in the presence of catalyst for the process of thermal decomposition of AP.     

Synthesis and thermal decomposition of neodymium(III) peroxotitanate to Nd<Subscript>2</Subscript>TiO<Subscript>5</Subscript>

Neodymium(III) peroxotitanate is used as a precursor for obtaining Nd₂TiO₅. The last one possesses numerous valuable electrophysical properties. TiCl₄, Nd(NO₃)₃·6H₂O and H₂O₂ in mol ratio 1:2:10 were used as starting materials. The reaction ambience was alkalized to pH = 9 with a solution of NH₃. The obtained neodymium(III) peroxotitanate and intermediate compounds of the isothermal heating were proved by the help of quantitative analysis and infrared spectroscopy (IRS). It has Nd₄[Ti₂(O₂)₄(OH)₁₂]·7H₂O composition. The absorption band observed in IRS at 831 cm^?1 relates to a triangular bonding of the peroxo group of Ti, at 1062 cm^?1—terminal groups Ti–OH and at 1491 and 1384 cm^?1—the bridging OH^?-groups Ti–O(H)–Ti. Nd₂TiO₅ was obtained by thermal decomposition of neodymium(III) peroxotitanate. The isothermal conditions for decomposition were determined on the base of differential thermal analysis, thermogravimetric and differential scanning calorimetry results in the temperature range of 20–1000 °C. The mechanism of thermal decomposition of Nd₄[Ti₂(O₂)₄(OH)₁₂]·7H₂O to Nd₂TiO₅ was studied. In the temperature range of 20–208 °C, a simultaneous decomposition of the peroxo groups by the separation of oxygen and hydrate water is conducted and Nd₄[Ti₂O₄(OH)₁₂] is obtained. From 208 to 390 °C, the terminal OH^?-groups are separated and Nd₄[Ti₂O₇(OH)₆] is formed. In the range of 390–824 °C, the bridging OH^?-groups are completely decomposed to Nd₂TiO₅. The optimal conditions for obtaining nanocrystalline Nd₂TiO₅ are 900 °C for 6 h and 20–80 nm.     

Poly(Styrene Sulfonate)/Poly(Allylamine Hydrochloride) Encapsulation of TiO<Subscript>2</Subscript> Nanoparticles Boosts Their Toxic and Repellent Activity Against Zika Virus Mosquito Vectors

Green fabricated nanoparticles often need to be encapsulated and stabilized, to ensure uniform dispersion in the aquatic environment and relevant larvicidal activity over time. However, recent research showed that nanoencapsulation processes led to a reduction of nanoparticle larvicidal efficacy. We used an extract of Argemone mexicana to reduce TiO₂ nanoparticles, which were then capped with PSS/PAH (poly(styrene sulfonate)/poly(allylamine hydrochloride)). The toxic and repellent potential of the nanoparticles were compared to elucidate their potential effects against the Zika virus vector Aedes aegypti. Nanoparticles were characterized by biophysical methods including UV–Vis, EDX and FTIR spectroscopy, SEM, TEM, XRD and DLS analyses. In larvicidal and pupicidal experiments, TiO₂ nanoparticles achieved LC₉₀ values from 41.648 (larva I), to 71.74 ppm (pupa). Nanoencapsulated TiO₂ achieved LC₉₀ values from 39.16 (I), to 69.12 ppm (pupa). In adulticidal experiments, LC₉₀ of TiO₂ nanoparticles on Ae. aegypti was 10.31 ppm, while LC₉₀ of nanoencapsulated TiO₂ was 9.54 ppm. At 10 ppm, the repellency towards Ae. aegypti was 80.43% for TiO₂ nanoparticles, and 88.04% for nanoencapsulated TiO₂. This research firstly highlighted the promising potential of PSS/PAH encapsulation, leading to the production of highly effective titania nanostructures, if compared to titania nanoparticles synthesized with eco-friendly routes without further stabilization.     

Charge separation by tetrahexahedron-SrTiO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> heterojunction as an efficient photocatalyst

Charge separation plays a key role in the conversion of solar energy into chemical energy for use in the redox reaction and as well as in the photocatalytic activity. In this study, SrTiO₃ particles with different morphologies including irregular, tetrahexahedron, and cube were synthesized by an in situ solvothermal method. The photocatalytic activity of the synthesized nanoparticles was investigated in the photocatalytic decomposition of methylene blue under UV light irradiation. Tetrahexahedron SrTiO₃ particles exhibited high decomposition activity (70 %), which is about two times higher than those of the irregular and cubic SrTiO₃ particles. The high decomposition activity of tetrahexahedron SrTiO₃ particles could be attributed to the improvement of charge separation achieved on different crystal facets. To reach a good charge separation, tetrahexahedron SrTiO₃/TiO₂ coupled nanoparticles were fabricated by impregnation method. Results showed that coupling tetrahexahedron SrTiO₃ with TiO₂ could produce efficient charge separation between tetrahexahedron SrTiO₃ and TiO₂ due to their matched band edges. In order to achieve better charge separation, the tetrahexahedron SrTiO₃/90 %TiO₂ sample was calcined at different temperatures in the 450–750 °C range. Tetrahexahedron SrTiO₃/90 %TiO₂ coupled nanoparticles calcined at 650 °C show high photocatalytic activity compared with other samples. The prepared samples were characterized by using various techniques such as X-ray diffraction, scanning electron microscopy, photoluminescence emission spectra, and UV–Vis diffuse reflectance spectroscopy.     

Preparation and performance of potassium-based sorbent using SnO<Subscript>2</Subscript> for post-combustion CO<Subscript>2</Subscript> capture

Potassium-based sorbents using γ-Al₂O₃ or TiO₂ as a support or an additive material have disadvantages in terms of their thermal stability and cyclic CO₂ capture. To overcome the shortcomings of these sorbents, a novel potassium-based sorbent (KSnI30) using SnO₂ was developed in this study. The KSnI30 sorbent formed only K₂CO₃ and SnO₂ phases without any inactive alloy species even after calcination at high temperatures (500–700 °C), indicating the good thermal stability of the KSnI30 sorbent regardless of the calcination temperature. Furthermore, the KSnI30 sorbent has an excellent regeneration property (above 98 %), as well as high CO₂ capture capacities (89–94 mg CO₂/g sorbent). Its excellent regeneration property is due to the formation of a KHCO₃ phase without by-products during CO₂ sorption. These results of the present study demonstrate that the SnO₂ shows promise as a new support or an additive material to replace TiO₂ and γ-Al₂O₃ in the preparation of a regenerable potassium-based sorbent for post-combustion CO₂ capture with good thermal stability and excellent regeneration property.     

Thermal stability of flexible polyurethane foams containing modified layered double hydroxides and zinc borate

Abstract

Flexible polyurethane foams (FPUFs) have been modified to contain layered double hydroxides (LDHs) by dihydrogen phosphate (H₂PO₄ ^?). The thermal stability of the prepared foams has been characterized using thermogravimetric analysis (TGA) at 5, 10, 20, 30, and 40?°C/min heating rates. The experimental data indicate that the temperature range for the two pyrolysis stages of FPUF is about 212–350?°C and 350–565?°C, respectively. Integral programmed decomposition temperature (IPDT) has been calculated according to the measured data, which was found that the IPDT of the modified FPUF was increased to 526?°C. Additionally, the thermal stability of FPUF composite has been also evaluated by the activation energy (E) on the basis of the pyrolysis kinetics of FPUF composites during thermal decomposition using Coats–Redfern integral method. These results manifest that the presence of intercalated LDHs enhances the thermal stability of FPUF.     

Sonication-polished anodic TiO<Subscript>2</Subscript> nanotube array-based photoanode for efficient solar energy conversion

In this work, the capping layer atop anodic TiO₂ nanotube arrays (NTAs), which hinders filling of other guest materials and transport of charge carriers, is discerned to be TiO₂ nanotapes. Then, it is completely removed by a novel sonication-polishing (SP) treatment, after which Sb₂S₃ is subsequently introduced to fill the nanotubes by chemical bath deposition. The morphological, structural, and optical properties of the SP-treated TiO₂ NTAs and TiO₂ NTAs/Sb₂S₃ heterogeneous structures are characterized systematically. The results indicate that SP treatment opens the tops of nanotubes with diameters of ～120 nm, which endure a phase conversion from amorphous to anatase after calcination at 450 °C; besides, stibnite Sb₂S₃ with a band gap of ～1.75 eV inside the TiO₂ networks is formed upon heat treatment at 330 °C in Ar, which enhances the absorption in visible light range. The photoelectrochemical (PEC) and photovoltaic properties for the SP-treated TiO₂ NTAs are investigated. Results shows that the photoresponse of TiO₂ NTAs is improved by the SP treatment, and the photocurrent for the TiO₂ NTAs/Sb₂S₃ electrode is substantially enhanced as compared to the bare TiO₂ one. A high efficiency of 6.28 % is achieved in a TiO₂ NTAs/Sb₂S₃ PEC cell. In addition, charge recombination in the photoanode of dye-sensitized solar cells (DSSCs) is observed to be greatly retarded by using the SP-treated TiO₂ NTAs as compared to TiO₂ nanoparticles (NPs). Thus, the SP anodic TiO₂ NTAs are promising in applications in various PEC areas such as photocatalysis and sensitized solar cells.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

Poly(ether–imide)/polyurethane foams reinforced with graphene nanoplatelet: Microstructure,thermal stability,and flame resistance

Novel poly(ether–imide)/polyurethane (PEI/PU)-based nanocomposite and foamed systems reinforced with graphene nanoplatelet (GNP) were developed. Field emission scanning electron microscopy revealed hexagonal nanocelluar morphology due to fine interaction between PEI/PU and functional GNP. Compression strength and modulus values were raised up to 72.3 MPa and 27.3 GPa, respectively, for PEI/PU/GNP Foam 1, thus revealing a defensive role of GNP layer against damage. T_max of PEI/PU/GNP Foam 0.1–1 was measured as 479–565°C. The UL 94 showed V-0 rating for nanocomposite, while foams attained V-1 rating. Water absorption capacity was improved steadily with time and was at maximum after 96 h for PEI/PU/GNP Foam 1 (12.3%).     

Thermo‐mechanical Properties of PEO‐PU/PAN Semi‐Interpenetrating Polymer Networks and their LiClO4 Salt‐Complexes

This paper is an investigation on the thermo‐mechanical properties of a new class of materials, which holds promise for its potential use as solid polymer electrolytes, i.e., SPE material. A series of poly(ethylene oxide)‐polyurethane/poly(acrylonitrile) (PEO‐PU/PAN) semi‐IPNs, along with their LiClO₄ salt complexes, were characterized for their thermal, mechanical and dimensional stability using DSC, TG‐DTA, UTM and DMTA. The glass transition temperature (T_g) of both the undoped and doped semi‐IPNs, obtained by DSC, remained well below room temperature (～?50°C to ?35°C), satisfying one of the essential requirements to serve as a SPE host matrix. The crystallization process in the PEO segments of the PEO‐PU/PAN semi‐IPNs was prevented at higher salt concentrations, which is attributed to the Li⁺ ion mediated pseudo‐crosslinks. Good thermal stability of the semi‐IPNs was evident from the degradation onset temperature (T₀～240°C) with a three‐stage degradation process, which is independent of the PAN content as observed from differential thermogravimetric studies. The incorporation of PAN in the PEO‐PU networks results in improved mechanical properties, such as tensile strength and modulus while retaining the flexibility of the semi‐IPNs. The peak temperatures and storage modulus obtained from DMTA correlates well with the observations of DSC and tensile measurements.     

Electrospun Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> composite nanofibers for enhanced high-rate lithium ion batteries

Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers with the mean diameter of ca. 60 nm have been synthesized via facile electrospinning. When the molar ratio of Li to Ti is 4.8:5, the Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers exhibit initial discharge capacity of 216.07 mAh g^?1 at 0.1 C, rate capability of 151 mAh g^?1 after being cycled at 20 C, and cycling stability of 122.93 mAh g^?1 after 1000 cycles at 20 C. Compared with pure Li₄Ti₅O₁₂ nanofibers and Li₂TiO₃ nanofibers, Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers show better performance when used as anode materials for lithium ion batteries. The enhanced electrochemical performances are explained by the incorporation of appropriate Li₂TiO₃ which could strengthen the structure stability of the hosted materials and has fast Li⁺-conductor characteristics, and the nanostructure of nanofibers which could offer high specific area between the active materials and electrolyte and shorten diffusion paths for ionic transport and electronic conduction. Our new findings provide an effective synthetic way to produce high-performance Li₄Ti₅O₁₂ anodes for lithium rechargeable batteries.     

Effect of Ag Loading on the Microstructure of TiO<Subscript>2</Subscript> Electrospun Nanofibers

In this research work, crystalline structure, phase transformation, morphology and mean size of titanium dioxide (TiO₂) electrospun nanofibers have been tailored by loading with 2.5, 5.0 and 7.5 wt.% of silver (Ag) which was followed by calcination. The as prepared non woven mats of nanofibers were calcinated at 500 °C to allow the reaction moieties to leave the TiO₂ matrix and subsequently formation of Ag clusters. The effect of Ag loading and calcination on the transformation of microstructure of these electrospun nanofibers have been characterized by XRD, FESEM, FT-IR and Raman spectroscopy (RS). The mean diameter of Ag loaded nanofibers has been found to decrease upon calcination which was estimated to 70 nm whereas length was in the order of mm range. XRD and RS results have strongly supported the transformation of crystalline phase from rutile (A) to anatase (R) above 2.5 wt.% of Ag loading in TiO₂ after calcination. The roughness on the outer surfaces of these nanofibers has been observed to increase with the Ag loading consequent to calcination, which has been attributed to the formation Ag nanoparticles that were found adsorbed at the surfaces. An interesting finding of this study is the existence of 1D nanofibers’ structure even at higher (7.5 wt.%) Ag loading, as observed by the SEM micrographs.