Integrating advanced functionality in a microfabricated high-throughput fluorescent-activated cell sorter

The integration of complete analyses systems "on chip" is one of the great potentials of microfabricated devices. In this study we present a new pressure-driven microfabricated fluorescent-activated cell sorter chip with advanced functional integration. Using this sorter, fluorescent latex beads are sorted from chicken red blood cells, achieving substantial enrichments at a sample throughput of 12000 cells s(-1). As a part of the sorter chip, we have developed a monolithically integrated single step coaxial flow compound for hydrodynamic focusing of samples in flow cytometry and cell sorting. The structure is simple, and can easily be microfabricated and integrated with other microfluidic components. We have designed an integrated chamber on the chip for holding and culturing of the sorted cells. By integrating this chamber, the risk of losing cells during cell handling processes is eliminated. Furthermore, we have also developed integrated optics for cell detection. Our new design contributes to the ongoing efforts for building a fully integrated micro cell sorting and analysing system.     

A low-cost and high-throughput benchtop cell sorter for isolating white blood cells from whole blood

The ability to isolate and purify white blood cells (WBCs) from mixed ensembles such as blood would benefit autologous cell-based therapeutics as well as diagnosis of WBC disorders. Current WBCs isolation methods have the limitations of low purity or requiring complex and expensive equipment. In addition, due to the overlap in size distribution between lymphocytes (i.e., a sub-population of WBCs) and red blood cells (RBCs), it is challenging to achieve isolation of entire WBCs populations. In this work, we developed an inertial microfluidics-based cell sorter, which enables size-based, high-throughput isolation, and enrichment of WBCs from RBC-lysed whole blood. Using the developed inertial microfluidic chip, the sorting resolution is sharpened within 2 μm, which achieved separation between 3 and 5 μm diameter particles. Thus, with the present cell sorter, a full population of WBCs can be isolated from RBC-lysed blood samples with recovery ratio of 92%, and merely 5% difference in the composition percentage of the three subpopulations of granulocytes, monocytes, and lymphocytes compared to the original sample. Furthermore, our cell sorter is designed to enable broad application of size-based inertial cell sorting by supplying a series of microchips with different sorting cutoff size. This strategy allows us to further enrich the lymphocytes population by twofold using another microchip with a cutoff size between 10 and 15 μm. With simplicity and efficiency, our cell sorter provides a powerful platform for isolating and sorting of WBCs and also envisions broad potential sorting applications for other cell types.     

Microfluidic sorting of fluorescently activated cells depending on gene expression level

During the last few years, fluorescence activated cell sorter has played an important role in a variety of biological investigations as well as clinical diagnostics. However, the conventional fluorescence activated cell sorter has several limitations, such as large size, large sample volumes required for operation, and high cost. In this paper, we present a novel microfluidic device that can separate cells based on various fluorescent protein expression levels. Our system consists of three major parts: focusing, detection, and separation. The operating principles are briefly as follows: first fluorescent cells were delivered into the microfluidic chip and focused in the center of channel by sheath flow. Subsequently, the cells were excited by a 532 nm laser at 30 μW and concurrently detected by a photomultiplier tube. Based on their fluorescence intensities, the cells were separated into three outlets by a dielectrophoretic force. Using this system, we successfully separated the genetically modified cells at 0.1 μL/min (sample flow rate) to sheath flow rate at 1:5, 5 Vpp voltage, and 800 kHz frequency. The separation efficiency was measured as high as 94.7%. In conclusion, we found that our system has the capability of separating genetically modified cells with various fluorescent intensities and help study biology and medicine in a molecular level.     

Pulsed laser triggered high speed microfluidic fluorescence activated cell sorter

We report a high speed and high purity pulsed laser triggered fluorescence activated cell sorter (PLACS) with a sorting throughput up to 20,000 mammalian cells s(-1) with 37% sorting purity, 90% cell viability in enrichment mode, and >90% purity in high purity mode at 1500 cells s(-1) or 3000 beads s(-1). Fast switching (30 μs) and a small perturbation volume (~90 pL) is achieved by a unique sorting mechanism in which explosive vapor bubbles are generated using focused laser pulses in a single layer microfluidic PDMS channel.     

Enhanced cell sorting and manipulation with combined optical tweezer and microfluidic chip technologies

Sorting (or isolation) and manipulation of rare cells with high recovery rate and purity are of critical importance to a wide range of physiological applications. In the current paper, we report on a generic single cell manipulation tool that integrates optical tweezers and microfluidic chip technologies for handling small cell population sorting with high accuracy. The laminar flow nature of microfluidics enables the targeted cells to be focused on a desired area for cell isolation. To recognize the target cells, we develop an image processing methodology with a recognition capability of multiple features, e.g., cell size and fluorescence label. The target cells can be moved precisely by optical tweezers to the desired destination in a noninvasive manner. The unique advantages of this sorter are its high recovery rate and purity in small cell population sorting. The design is based on dynamic fluid and dynamic light pattern, in which single as well as multiple laser traps are employed for cell transportation, and a recognition capability of multiple cell features. Experiments of sorting yeast cells and human embryonic stem cells are performed to demonstrate the effectiveness of the proposed cell sorting approach.     

Cell separation based on size and deformability using microfluidic funnel ratchets

The separation of biological cells by filtration through microstructured constrictions is limited by unpredictable variations of the filter hydrodynamic resistance as cells accumulate in the microstructure. Applying a reverse flow to unclog the filter will undo the separation and reduce filter selectivity because of the reversibility of low-Reynolds number flow. We introduce a microfluidic structural ratchet mechanism to separate cells using oscillatory flow. Using model cells and microparticles, we confirmed the ability of this mechanism to sort and separate cells and particles based on size and deformability. We further demonstrate that the spatial distribution of cells after sorting is repeatable and that the separation process is irreversible. This mechanism can be applied generally to separate cells that differ based on size and deformability.     

Micromachined electrochemical T-switches for cell sorting applications

MEMS micro-T-switches actuated via electrochemical bubbles for cell sorting applications in a monolithic chip level are proposed and successfully demonstrated. The electrolysis-bubble actuator, which has the features of low operation temperature and high surface-tension force, is developed to actuate the micro-T-switch sorting structure in our device. The double T-structure design, the T-shape microchannel with the movable micro-T-switch structure located at the junction of the T-shape microchannel, with the electrolysis-bubble actuator makes an active-binary switch function available for cell sorting applications. The room temperature operation and the low voltage required for electrolysis actuation minimize the possibility of cell-damage that happens in the conventional high electric separation instruments, such as flow cytometry. The function of our micro-T-switch chip with a low required actuation voltage of 3.0 approximately 3.5 V is demonstrated by using human hepatoma cells in this paper. The pH-value measurements characterize the pH-value variation and distribution in the actuating chambers and the mainstream microchannels to trace the possible liver-cell injury due to the pH-value variation during electrolysis-actuation operation. The 84.1% cell viability in the sorted human hepatoma cells through our micro-T-switch sorter is observed via the fluorescence assay technique. Furthermore, 70.2% of total injected cells recover in culture after sorting and grow into colonies after micro-T-switch sorting operation. In this paper, we describe the design, microfabrication, and characterization of our micro-T-switch cell-sorting chip. We also report the cell-sorting demonstration and the cell viability results for the mammalian liver cells through our micro-T-switch cell-sorting chip.     

Label-free cell separation and sorting in microfluidic systems

Cell separation and sorting are essential steps in cell biology research and in many diagnostic and therapeutic methods. Recently, there has been interest in methods which avoid the use of biochemical labels; numerous intrinsic biomarkers have been explored to identify cells including size, electrical polarizability, and hydrodynamic properties. This review highlights microfluidic techniques used for label-free discrimination and fractionation of cell populations. Microfluidic systems have been adopted to precisely handle single cells and interface with other tools for biochemical analysis. We analyzed many of these techniques, detailing their mode of separation, while concentrating on recent developments and evaluating their prospects for application. Furthermore, this was done from a perspective where inertial effects are considered important and general performance metrics were proposed which would ease comparison of reported technologies. Lastly, we assess the current state of these technologies and suggest directions which may make them more accessible.     

Reconstituted low density lipoprotein: a vehicle for the delivery of hydrophobic fluorescent probes to cells.

Previous studies have shown that the cholesteryl ester core of plasma low density lipoprotein (LDL) can be extracted with heptane and replaced with a variety of hydrophobic molecules. In the present report we use this reconstitution technique to incorporate two fluorescent probes, 3-pyrenemethyl-23, 24-dinor-5-cholen-22-oate-3 beta-yl oleate (PMCA oleate) and dioleyl fluorescein, into heptane-extracted LDL. Both fluorescent lipoprotein preparations were shown to be useful probes for visualizing the receptor-mediated endocytosis of LDL in cultured human fibroblasts. When normal fibroblasts were incubated at 37 degrees C with either of the fluorescent LDL preparations, fluorescent granules accumulated in the perinuclear region of the cell. In contrast, fibroblasts from patients with the homozygous form of familial hypercholesterolemia (FH) that lack functional LDL receptors did not accumulate visible fluorescent granules when incubated with the fluorescent reconstituted LDL. A fluorescence-activated cell sorter was used to quantify the fluorescence intensity of individual cells that had been incubated with LDL reconstituted with dioleyl fluorescein. With this technique a population of normal fibroblasts could be distinguished from a population of FH fibroblasts. The current studies demonstrate the feasibility of using fluorescent reconstituted LDL in conjunction with the cell sorter to isolate mutant cells lacking functional LDL receptors.     

A dielectrophoretic continuous flow sorter using integrated microelectrodes coupled to a channel constriction

In this article, we propose a novel dielectrophoretic continuous flow sorter using planar micro electrodes coupled to a channel constriction. This design enables a high particle sorting efficiency at low voltages while relying on a simple fabrication and integration process. We have numerically simulated the AC electrokinetic effects and the fluid behavior to predict particle trajectories. Simulation results are in accordance with experimental data: 10 and 5 μm polystyrene beads were continuously sorted with <2% errors at flow speeds of 100 μm/s. We were also able to change the particle buffer while sorting beads. Finally, to demonstrate the interest of our device for cell sorting, we also sorted dead and living yeast cells according to their different dielectric properties. Living cell concentration was enriched by a factor of 4 versus dead cell concentration after passing the sorting device.     

Recent advances in microfluidic cell sorting techniques based on both physical and biochemical principles

Microfluidic technologies for isolating cells of interest from a heterogeneous sample have attracted great attentions, due to the advantages of less sample consumption, simple operating procedure, and high separation accuracy. According to the working principles, the microfluidic cell sorting techniques can be categorized into biochemical (labeled) and physical (label‐free) methods. However, the inherent drawbacks of each type of method may somehow influence the popularization of these cell sorting techniques. Using the multiple complementary isolation principles is a promising strategy to overcome this problem, therefore there appears to be a continuing trend to integrate two or more sorting methods together. In this review, we focus on the recent advances in microfluidic cell sorting techniques relied on both physical and biochemical principles, with emphasis on the mechanisms of cell separation. The biochemical cell sorting techniques enhanced by physical principles and the physical cell sorting techniques enhanced by biochemical principles, are first introduced. Then, we highlight on‐chip magnetic‐activated cell sorting, on‐chip fluorescence‐activated cell sorting, multi‐step cell sorting and multi‐principle cell sorting techniques, which are based on both physical and biochemical separation mechanisms. Finally, the challenges and future perspectives of the integrated microfluidics for cell sorting are discussed.     

Determination of formaldehyde in single cell by capillary electrophoresis with LIF detection

As a small molecule gas, formaldehyde (FA) is the simplest carbonyl active material and plays an important role in the carbon cycle of metabolism. However, due to the volatile nature of the gas, it is difficult to accurately quantify its content, which limits the study of the mechanism of action in life activities. Thus, an efficient approach to quantitative detection of FA in cells especially in single cell is urgent needed. Nevertheless, no method for quantifying FA in single cell has been reported to date. In this work, a fluorescent probe N‐propyl‐4‐hydrazino‐naphthalimide (NPHNA), which has highly desirable attributes and has been applied to living biological samples, was chosen as labeling reagent to detect endogenous FA at single cell level. After optimization of separation conditions, fast baseline separation of the FA derivative N‐propyl‐4‐hydrazone‐naphthalimide product (NPHNA‐FA) and NPHNA was achieved in about 5 min by CE with LIF detection. The detection limit for FA was 5 amol (S/N ratio of 3). The developed method was validated by the measurements of intracellular levels of FA in single cell.     

Microfluidic sorting system based on optical waveguide integration and diode laser bar trapping

Effective methods for manipulating, isolating and sorting cells and particles are essential for the development of microfluidic-based life science research and diagnostic platforms. We demonstrate an integrated optical platform for cell and particle sorting in microfluidic structures. Fluorescent-dyed particles are excited using an integrated optical waveguide network within micro-channels. A diode-bar optical trapping scheme guides the particles across the waveguide/micro-channel structures and selectively sorts particles based upon their fluorescent signature. This integrated detection and separation approach streamlines microfluidic cell sorting and minimizes the optical and feedback complexity commonly associated with extant platforms.     

Continuous sorting of magnetic cells via on-chip free-flow magnetophoresis

The ability to separate living cells is an essential aspect of cell research. Magnetic cell separation methods are among some of the most efficient methods for bulk cell separation. With the development of microfluidic platforms within the biotechnology sector, the design of miniaturised magnetic cell sorters is desirable. Here, we report the continuous sorting of cells loaded with magnetic nanoparticles in a microfluidic magnetic separation device. Cells were passed through a microfluidic chamber and were deflected from the direction of flow by means of a magnetic field. Two types of cells were studied, mouse macrophages and human ovarian cancer cells (HeLa cells). The deflection was dependent on the magnetic moment and size of the cells as well as on the applied flow rate. The experimentally observed deflection matched well with calculations. Furthermore, the separation of magnetic and non-magnetic cells was demonstrated using the same microfluidic device.     

Flow-through sampling for electrophoresis-based microfluidic chips using hydrodynamic pumping

This work presents a novel electrophoretic microchip design which is capable of directly coupling with flow-through analyzers for uninterrupted sampling. In this device, a 3 mm wide sampling channel (SC) was etched on quartz substrate to create the sample inlet and outlet and the 75 microm wide electrophoretic channels were also fabricated on the same substrate. Pressure was used to drive the sample flow through the external tube into the SC and the flow was then split into outlet and electrophoretic channels. A gating voltage was applied to the electrophoretic channel to control the sample loading for subsequent separations and inhibit the sample leakage. The minimum gating voltage required to inhibit the sample leakage depended on the solution buffer and increased with the hydrodynamic flow-rate. A fluorescent dye mixture containing Rhodamine B and Cy3 was introduced into the sample stream at either a continuous or discrete mode via an on-line injection valve and then separated and detected on the microchip using laser-induced fluorescence. For both modes, the relative standard deviation of migration time and peak intensity for consecutive injections was determined to be below 0.6 and 8%, respectively. Because the SC was kept floating, the external sampling equipment requires no electric connection. Therefore, such an electrophoresis-based microchip can be directly coupled with any pressure-driven flow analyzers without hardware modifications. To our best knowledge, this is something currently impossible for reported electrophoretic microchip designs.     

SPLITT Cell Analytical Separation of Silica Particles. Non-Specific Crossover Effects: Does the Shear-Induced Diffusion Play a Role?

The gravitational split-flow lateral transport thin fractionation is known to be a fast, simple, theoretically tractable and tunable tool for the binary separation of molecular or particulate samples into different dimensional fractions. This fractionation is performed in a so-called SPLITT cell and is due to the combined effect of the gravitational force field and the flow rates inside the separation channel. It is known that separation performance is strongly dependent on the flow rate conditions and feed flow concentration, however, to date, few studies have been conducted to investigate the effect non-specific crossover has on separation. The aim of this work is to establish whether diffusive processes stemming from hydrodynamic effects contribute in any way to the quality of separation. A silica sample of known granule size distribution was chosen for this study which has environmental applications.     

Double spiral microchannel for label-free tumor cell separation and enrichment

This work reports on a passive double spiral microfluidic device allowing rapid and label-free tumor cell separation and enrichment from diluted peripheral whole blood, by exploiting the size-dependent hydrodynamic forces. A numerical model is developed to simulate the Dean flow inside the curved geometry and to track the particle/cell trajectories, which is validated against the experimental observations and serves as a theoretical foundation for optimizing the operating conditions. Results from separating tumor cells (MCF-7 and Hela) spiked into whole blood indicate that 92.28% of blood cells and 96.77% of tumor cells are collected at the inner and the middle outlet, respectively, with 88.5% tumor recovery rate at a throughput of 3.33 × 10(7) cells min(-1). We expect that this label-free microfluidic platform, driven by purely hydrodynamic forces, would have an impact on fundamental and clinical studies of circulating tumor cells.     

A simple mechanism for reliable particle sorting in a microdevice with combined electroosmotic and pressure-driven flow

Selective transport and sorting of particles in microfluidic devices by electroosmosis is complicated due to superposition of uncontrolled hydrodynamic pressure contributions on the electroosmotic force. In this paper, we present a microfluidic concept for the reliable and simple separation and sorting of particles in a microchip by electroosmosis combined with pressure-driven flow. The presented device allows fluid quantities to be switched and particles to be sorted within a channel manifold using only a single power supply with fixed voltage and an electric switch. Consequently, chip operation and fluid switching procedure are greatly simplified compared to a situation, in which several independent power sources are used for flow balancing, as is the common procedure. With the triple-T channel design presented, backpressure flow disturbing the electrokinetic fluid and particle separation process is eliminated by introducing controlled opposed hydrodynamic flow of buffer from side channels. This pressure-driven flow is generated on-chip by setting up differences in the reservoir pressures in a defined manner. A detailed flow analysis based on the equivalence of fluid flow and electric current is performed and the conditions for reliable chip function are worked out.     

Effect of flow development region and fringing magnetic force field on annular split-flow thin fractionation

Split-flow thin (SPLITT) fractionation devices have been widely used to separate macromolecules, colloids, cells and particles. Recently, the quadrupole magnetic flow sorter (QMS) has been reported in the literature as another family of SPLITT fractionation device. However, the separation performance observed in the experimental measurements is generally found to deviate from the ideal behaviour. Possible causes such as hydrodynamic lift force, high particle concentration and imperfect geometries have been extensively examined. However, the effects of flow development regions and fringing magnetic force field at the separation channel inlet and outlet, which are ignored by the theory, have not been investigated. The error introduced by ignoring these effects need to be rigorously studied so that the theory can be used to optimise operation flow rates with confidence. Indeed, we find in this paper that these ignored effects are responsible to the discrepancy between the experimental data and the theoretical predictions. A new theory has been proposed for optimisation of device operation.     

Study of magnetic particles pulse-injected into an annular SPLITT-like channel inside a quadrupole magnetic field

Advantages of the continuous magnetic flow sorting for biomedical applications over current, batch-wise magnetic separations include high throughput and a potential for scale-up operations. A continuous magnetic sorting process has been developed based on the quadrupole magnetic field centered on an annular flow channel. The performance of the sorter has been described using the conceptual framework of split-flow thin (SPLITT) fractionation, a derivative of field-flow fractionation (FFF). To eliminate the variability inherent in working with a heterogenous cell population, we developed a set of monodisperse magnetic microspheres of a characteristic magnetization, and a magnetophoretic mobility, similar to those of the cells labeled with a magnetic colloid. The theory of the magnetic sorting process has been tested by injecting a suspension of the magnetic beads into the carrier fluid flowing through the sorter and by comparing the theoretical and experimental recovery versus total flow-rate profiles. The position of the recovery maxima along the total flow-rate axis was a function of the average bead magnetophoretic mobility and the magnetic field intensity. The theory has correctly predicted the position of the peak maxima on the total flow-rate axis and the dependence on the bead mobility and the field intensity, but has not correctly predicted the peak heights. The differences between the calculated and the measured peak heights were a function of the total flow-rate through the system, indicating a fluid-mechanical origin of the deviations from the theory (such as expected of the lift force effects in the system). The well-controlled elution studies using the monodisperse magnetic beads, and the SPLITT theory, provided us with a firm basis for the future sorter evaluation using cell mixtures.