Synthesis of aromatic hyperbranched PAMAM polymers

Our preliminary results towards the synthesis of hyperbranched polyamidoamine (PAMAM) polymers as ‘dendrimer equivalents’ is described. An aromatic AB₂ bis-amino acid monomer was polymerised at 165 °C (under vacuum) and the crude mixture purified by dialysis. Analysis by GPC and MALDI-TOF mass spectroscopy showed that the purified hyperbranched polymers possessed an M_n of 2000 and a PD of 3.2.     

Synthesis and applications of hyperbranched polymers

The development of hyperbranched polymers is a rapidly expanding field in the area of macromolecular science. This short review highlights some of the notable examples in the synthesis of hyperbranched polymers and some of the key advances that have been made in the application of these hyperbranched materials in the areas of material property modifications and in high value technologies.     

Synthesis and characterization of hyperbranched polyurethane-benzyltetrazole

A series of hyperbranched polyurethane-benzyltetrazoles（H-PBTZs） with different linkage structures were synthesized via the polycondensation of hexamethylenediisocyanate as an A₂ type monomer with（4-（1H-tetrazol-5- yl）benzyl）-diethanolamine（TBDEA） as a BB’₂ type monomer in the absence of catalyst at different temperatures.The FTIR, and ¹³C and ¹H-NMR spectroscopy were used to characterize the molecular structures of TBDEA and H-PBTZs as well as the counterpart linear polyurethane-benzyltetrazole（L-PBTZ）.The molecular composition was determined by the reaction selectivity that the isocyanate group reacted with the hydroxyl group in diethanolamine segment or the active hydrogen atom on tetrazole ring.Raising reaction temperature was propitious to the reaction of isocyanate group with the active hydrogen atom on tetrazole ring.The degrees of branching（DB） for H-PBTZs obtained from the ¹H-NMR spectra increased with raising reaction temperature.The wider molecular weight distribution of 1.7-2.9 for H-PBTZs was obtained via GPC analysis.TGA results showed that H-PBTZs had high thermal stability compared with L-PBTZ.     

超支化聚芴的合成与性能研究

采用2,7-二(4-羟基苯基)-9,9-二烷基芴(A2)与四对甲基苯磺酸季戊四醇酯(B4)通过A2+B4型缩聚反应合成了一系列共轭型超支化聚合物.利用紫外和荧光谱对聚合物予以表征,结果表明,此类聚合物均可发出稳定、纯正的蓝光.DSC和TGA显示,4种聚合物在150℃以下没有明显的相态变化,300℃以内无明显的热分解现象,这表明此类聚合物具有良好的热稳定性,有利于材料的发光效率及发光稳定性.     

Synthesis and characterization of hyperbranched polyurethane-urea coatings

A series of hyperbranched polyurethane (HBPU)-urea coatings were synthesized by a systematic two-step reaction process. Initially, isocyanate terminated PU prepolymers were prepared from a hyperbranched polyester polyols with isophorone diisocyanate at NCO/OH ratio of 1.6:1 for 5 h at 70-80 °C. The excess NCO content after the synthesis of NCO terminated HBPU prepolymer was completely reacted with atmospheric moisture. The obtained HBPU-urea networks were characterized with Fourier transform-infrared (FT-IR) spectroscopy for the quantitative evolution of the extent of urethane and urea bonds as well as to study the structure-property relationship. In order to find out the changes and types of intermolecular H-bonding interaction in the HBPU-urea films with the variation in polyester structure, the deconvolution of FT-IR spectra were carried out using Origin 6.0 software through Gaussian curve-fitting method. The viscoelastic properties and thermal stability of the synthesized coatings were determined by dynamic mechanical and thermal analyzer and thermogravimetric analyzer, respectively. For HBPU-urea samples glass transition temperature and thermal stability increased with the generation number from the first to the third. Polyester samples showed single step decomposition profile and HBPU-urea samples showed two-steps decomposition with good thermal stability.     

Synthesis and properties of hyperbranched conjugated porphyrins

[reaction: see text] Hyperbranched conjugated porphyrin arrays were prepared by one-pot Suzuki polycondensation of AB3 and AB3 + C4 approaches.     

Synthesis of thioether derivatives of hyperbranched carbosilane polymer

Novel hyperbranched functional and non-functional carbosilane polymers bearing the thioether groups were synthesized. Thioether derivatives were prepared by the UV initiated hydrothiolation of the hyperbranched poly(allyl)carbosilane polymer with 1-decanethiol and 3-mercaptopropyl(methyl)dimethoxysilane.     

Synthesis of hyperbranched aromatic polyamides by direct polycondensation

Some hyperbranched aromatic polyamides have been synthesized by direct polycondensation using the modified Higashi's method. Structures of the above polymers have been realized taking in proper account the analogies with amide group sequences of poly(p-phenyleneterephthalamide) (PPDT) and poly(p-benzamide) (PBA). Therefore, AB₂- type monomers as well as suitable combinations of different bi- and trifunctional reactants (AA + B₃) (e.g., p-phenylenediamine + trimesic acid or other trifunctional acids) have been considered. For the latter systems, network formation has been minimized. In the present paper, our results on their direct polyamidation together with some preliminary characterization data on the resultant hyperbranched aramids are given.     

Synthesis of hyperbranched polymers with precise conjugation length

A set of AB₂ type monodisperse conjugated oligomers carrying two bromo functional groups and one boronic ester functional group were prepared by iterative deprotection and Sonogashira cross‐coupling reactions. Suzuki polycondensation of these AB₂ type monodisperse oligomers afforded hyperbranched polymers. The hyperbranched conjugated polymers we prepared possess not only precisely controlled conjugation length like monodisperse conjugated oligomers but also the structural feature of hyperbranched polymers. Optical property investigation demonstrated that the maximum absorption and emission wavelength red‐shifted along with the increasing of the conjugation length between the two branching points and the hyperbranched structure could effectively reduce the aggregation of the conjugated polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1084–1092, 2007     

Synthesis and thermal degradation behaviors of hyperbranched polyphosphate

A novel epoxy-terminated hyperbranched polyphosphate (E-HBPP) was synthesized by employing an A₂ + B₃ polycondensation and characterized by FTIR, ¹H NMR and GPC. E-HBPP was used as a reactive-type flame retardant for diglycidyl ether of bisphenol-A/m-phenylene diamine (DGEBA/mPDA) system. A series of flame retardant resins were prepared and their flame retardancy was monitored by the limiting oxygen index (LOI). The results showed that the LOI value of the cured samples and the degree of expansion of the formed char after burning increased along with the E-HBPP content. Their thermal degradation behaviors were investigated by thermogravimetric analysis and in situ FTIR and showed that the phosphate group of E-HBPP first degraded to form poly(phosphoric acid)s at around 300 °C, which had a major contribution to form the compact char to protect the sample from further degradation. The dynamic mechanical thermal properties were studied by dynamic mechanical thermal analysis (DMTA) and the results showed a good miscibility between E-HBPP and DGEBA. The mechanical properties of the cured films were also investigated. Less than 20% E-HBPP addition improved both the tensile strength and elongation at break.     

超支化分子桥联受阻酚抗氧化剂的合成与表征

以正十八胺为核的1.0代超支化大分子和β-(3,5-二叔丁基-4-羟基苯基)丙酰氯为原料,通过酰胺化缩合反应,合成了一种具有长链烷基和2个受阻酚基团的新型超支化分子桥联受阻酚类抗氧化剂.通过正交实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成体系为:3,5-丙酰氯为酰化剂、K_2CO_3为缚酸剂、苯和水为反应溶剂.通过条件优化实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成条件为:3,5-丙酰氯与1.0代超支化大分子的物质的量比为6∶1、反应温度为25 ℃、反应时间为12 h、体系苯与水体积比为6∶1、3,5-丙酰氯与缚酸剂K_2CO_3的物质的量比为1∶1,在此条件下,超支化分子桥联受阻酚类抗氧化剂的收率高达75.5%.FT-IR和1H NMR证实了合成抗氧化剂的化学结构与其理论结构相符.超支化分子桥联受阻酚类抗氧化剂在聚乙烯树脂中的抗氧化性能优于抗氧化剂1076,且随着烷基链长度的增加,抗氧化性能增强.     

Synthesis of hyperbranched polyester polymaleic acids third generation

The third generation hyperbranched polyesterpolyol has been modified with maleic anhydride at various ratios of the polyol to the modifying agent, from 1: 6 to 1: 18. The prepared modified polyols are capable of the complex formation with copper(II), cobalt(II), and nickel(II) ions.     

Synthesis of photocrosslinkable hyperbranched polyesters and their film properties

Hyperbranched polyesters with terminal methacryloyl groups (HBPEAc) were synthesized by the one‐pot polyaddition of bisphenol A diglycidyl ether and trimesic acid in the presence of methacrylic acid with a number‐average molecular weights of 5100–7700 in 70–83% yields. The photoradical polymerization of HBPEAc was examined in the presence of 2‐methyl‐1‐[4‐(methylthio)phenyl]‐2‐morpholinopropan‐2‐one (Irgacure 907®) as a photoinitiator in the film state upon UV irradiation to afford the corresponding cured films quantitatively. The crosslinking densities of the cured films of HBPEAc were higher than those of the corresponding linear ones, and birefringence cannot be detected for the cured films of HBPEAc because of their random structures. Furthermore, an alkaline‐developable hyperbranched polyester containing pendant carboxyl groups (HBPEAc‐COOH) was prepared by the addition reaction of HBPEAc with cis‐1,2,3,6‐tetrahydrophthalic anhydride, and its patterning properties were examined to give the resolution of a 55‐μm‐line and 275‐μm‐space pattern by UV irradiation with 700 mJ/cm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4642–4653, 2005     

Synthesis of multi-arm star polystyrene with hyperbranched polyether core

Multi-arm star polystyrenes with hyperbranched poly(3-ethyl-3-oxetanemethanol) (PEOM, 3) core were synthesized by atom transfer radical polymerization (ATRP) method. The structures of polymers were confirmed by FT-IR and ¹H NMR. GPC results showed that the resultant polymers had relatively low polydispersity indices (PD = 1.47-2.03). DSC analysis indicated that polystyrene star polymers had a glass transition temperature (T_g = 42.2-91.5 °C) that changed with the amount of the polystyrene in the polymers. In addition, the aggregation behavior of the multi-arm star polystyrenes in a selective solvent (THF/cyclohexane) was probed with polystyrene arms that encapsulated in the aggregates and PEOM cores hidden in the center of the micelles.     

Synthesis of novel hyperbranched polyimide for liquid crystal alignment

A novel hyperbranched polyimide (HPPI) was synthesized from a new four‐functional amine and 1,2,3,4‐cyclobutanetetracarboxylic dianhydride. The polyimide with hyperbranched structure exhibited excellent alignment for nematic liquid crystal (LC) compared with traditional linear polyimides. The solution viscosities of the poly(amic acids) (PAAs) and the surface morphology of PI films were investigated using an Ubbelhode‐type viscometer and atomic force microscopy, respectively. The viscosities of the hyperbranched PAAs were much lower than that of the linear PAA solution at any monomer ratio (amine:dianhydride). Pretilt angles of LCs above 2.8° were achieved with HPPI.     

Synthesis and characterization of a flame retardant hyperbranched polyether

<正>A brominated hyperbranched polyether has been synthesized from cyanuric chloride and sodium salt of tetrabromobisphenol-A by an A_2+B_3 approach.The synthesized polyether was characterized by ~1H-NMR,~(13)C-NMR,UV, FTIR spectroscopy and X-ray diffraction studies,measurements of solution viscosity,molecular weight and solubility and elemental and thermogravimetric analyses.The flame retardancy of the synthesized polyether and its blends with commercially available plasticized poly(vinyl chloride)(PVC) and low density polyethylene(LDPE) was investigated by measurements of limiting oxygen index(LOI) value and thermogravimetric analysis.The properties are compared with a non-halogenated similar type of bisphenol-A based aromatic polyether after blending at different dose levels with the same base polymers.The LOI values of these blends indicated that these hyperbranched polyethers acted as flame retardant additives,and antimony trioxide had prominent synergistic effect with the bromo hyperbranched polyether for the above base polymers,and an increment of 4 to 6 units in LOI values was observed.     

Synthesis and characterization of hyperbranched polyesters and polyurethane coatings

Polyurethane (PU) coatings are widely used for variety of high‐performance applications in today's coating technology. The emerging hyperbranched polymers having three‐dimensional morphology have opened a new avenue to tailor the architecture of PU coatings. The methodology followed here is based on preparation of PU coatings from hyperbranched polyester. Initially, different hyperbranched polyester polyols (HPs) were synthesized by varying the hydroxyl‐terminated precursors that is, pentaerythritol, trimethylol propane or glycerol and keeping the diacid that is, adipic acid quantity constant at various mole ratios of 1:0.6, 1:0.8, 1:0.9, and 1:1, respectively. The obtained HPs were characterized by nuclear magnetic resonance (NMR) spectroscopy, matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF)‐mass spectrometry, and Fourier transform‐infrared (FTIR) spectroscopy. The degree of branching and the quantity of different structural units present in the various HPs were calculated by integrating the quaternary carbon and carbonyl zone in ¹³C NMR spectroscopy. The extent of condensation in different HPs was also calculated from ¹H NMR spectra. Later on, NCO‐terminated PU prepolymers (NCO‐PU) were synthesized by reacting HPs with isophorone diisocyanate (IPDI) at NCO/OH ratio of 1.6:1. In the third step, the excess NCO content in the NCO‐capped PU prepolymers were reacted with atmospheric moisture and hyperbranched polyurethane (HPU) coatings were formed. The coating films were analyzed by FTIR and dynamic mechanical thermal analysis instruments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2673–2688, 2007     

Synthesis and characterization of hyperbranched mesoporous silica SBA-15

Branched mesoporous silica SBA-15 materials have been prepared in a simple process using non-ionic surfactant in acidic conditions in the presence of metal ions.     

Synthesis of novel low-viscosity liquid epoxidized aromatic hyperbranched polymers

Low-viscosity liquid epoxidized aromatic hyperbranched polymers are synthesized by the reaction between epichlorohydrin (ECH) and carboxy-end hyperbranched polymers prepared from low-cost products trimellitic anhydride (B₃ TMA) and dihydroxy alcohols (A₂). The low-viscosity property, especially the lowest viscosity of epoxidized aromatic hyperbranched polymers is only 350 cp which has not reported among epoxidized aromatic hyperbranched polymers before, make them can be used to coatings and adhesion fields without organic solvent hopefully. The properties of the epoxidized aromatic hyperbranched polymers are measured by GPC, FT-IR and viscometer.