三元体系MgCl2-CO(NH2)2-H2O在25℃时的等温溶度与新相研究

测定了25℃时三元体系MgCl₂-CO(NH₂)₂-H₂O的等温溶度及饱和溶液的折光率和密度,且绘制成溶度图和性质-组成图.在三元体系内形成2个三元化合物新相:MgCl₂·CO(NH₂)₂·4H₂O(记作A)和Mgcl₂·4CO(NH₂)₂·2H₂O(记作B),B为新化合物.三元体系的溶度图由4支单饱和线[对应单饱和固相为MgCl₂·6H₂O、三元化合物A和B、CO(NH₂)₂]组成,这4支单饱和线两两交于3个三元无变点[对应双饱和固相为MgCl₂·6H₂O+A、A+B、B+CO(NH₂)₂].     

The multichannel reaction NH2 + NH2 at ambient temperature and low pressures

NH₂ profiles were measured in a discharge flow reactor at ambient temperature by monitoring reactants and products with an electron impact mass spectrometer. At the low pressures used (0.7 and 1.0 mbar) the gas-phase self-reaction is dominated by a ‘bimolecular’ H₂-eliminating exit channel with a rate coefficient of k_3b(300 K) = (1.3 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and leading to N₂H₂ + H₂ or NNH₂ + H₂. Although the wall loss for NH₂ radicals is relatively small (k_w ≈ 6–14 s⁻¹), the contribution to the overall NH₂ decay is important due to the relatively slow gas-phase reaction. The heterogeneous reaction yields N₂H₄ molecules.     

Structural Characterizations of Spherical Octadecavanadates Encapsulating Na+, K+ or I- and Ellipsoidal Octadecamolybdate Encapsulating two Anions of SO42-

Polyoxoanions of tungsten, molybdenum, and vanadium have been the subject of interest since their wide variety of compositions, structures, and properties give rise to numerous important applications^[1]. From the NH₄VO₃/Na₂S_x (or (NH₄)₂S_x) reaction system we synthesized several spherical octadecavanadates with Na⁺,K⁺, NH₄⁺ or I encapsulated using hydrothermal method. These complexes include (NH₄)₁₁[V₁₈O₄₂(Na)]·(H₂O)₂₀ 1; (NH₄)₁₁[V₁₈O₄₂(K)]·(H₂O)₆, 2; (NH₄)₁₀(Na)[V₁₈O₄₂(Na)]·(H₂O)₂₆, 3; (NH₄)₁₁[V₁₈O₄₂(NH4]·(H₂O)₂₀, 4; and (NH₄)₂₀(I)₇[V₁₈O₄₂(I)]·(H₂O)₁₂, 5, in which the structures of 1, 2, 3, and 5 have been determined by X-ray analyses. In the analogous reaction system of (NH₄)₂MoS₄/(NH₄)₂S_x, we also obtained one ellipsoidal octadecamolybdate, (NH₄)₄[Mo₁₈O₅₄(2SO₄)]·(H₂O)₄, 6 with a standard Wells-Dawson structure^[2]. The Ortep drawings of the two kinds of structures are viewed as follows.     

Cationic cobaltammine as anion receptor: Synthesis, characterization, single crystal X-ray structure and packing analysis of hexaamminecobalt(III) chloride (R,R)-tartrate monohydrate

In an effort to utilize the [Co(NH₃)₆]³⁺ cation as a new anion receptor (binding agent) for dihydroxy dicarboxylate anion i.e., tartrate, orange single crystals of hexaamminecobalt(III) chloride (R,R)-tartrate monohydrate, [Co(NH₃)₆]Cl(C₄H₄O₆)·H₂O, were obtained by reacting hexaamminecobalt(III) chloride with potassium–sodium tartrate tetrahydrate in a 1:1 molar ratio in hot water. The single crystal X-ray structure determination of [Co(NH₃)₆]Cl(C₄H₄O₆)·H₂O revealed that a distinctive network of hydrogen bonding interactions (N–HO, N–HCl⁻, O–HO) stabilize the crystal lattice. This is the first complex salt of hexaamminecobalt(III) with dihydroxy dicarboxylate anion i.e., tartrate.     

The use of MIDI basis set at the correlated level

The H₂O + H₂O, the NH₃ + NH₃, the BH₃ + H₂O and the Ne + Ne systems have been studied in the supermolecule approach, using several medium sized basis sets (especially the so-called MIDI basis set). The calculations have been carried out by the use of localized molecular orbitals (LMOs).

The dispersion interaction energies have been computed by a new method (Kozmutza and Kapuy; Int. J. Quantum Chem., 38 (1990) 665), whose essence lies in the use of LMO contributions at the correlated level.

The method proposed seems to be useful for the H₂O + H₂O, the NH₃ + NH₃, and the Ne + Ne systems at different intermolecular distances, using the MIDI basis, but fails in describing correctly the correlation energy for the BH₃ + H₂O system.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

Polarized absorption spectra and polarized Raman spectra of single crystals of trans(Cl2)-[CoCl2(NH3)n(H2O)4−n]Cl complexes (n = 2, 3, 4)

The title cobalt(III) complexes have been investigated by polarized absorption and Raman spectroscopies of the single crystals. The symmetry properties of the d-electron orbitals and of the vibrational modes attributable to the Raman bands of trans(Cl₂)-[CoCl₂(NH₃)_n(H₂O)_4−n]Cl complexes (n = 2, 3, or 4) were examined to elucidated the peculiar observation that ligand substitution causes no splitting of the 15 200-cm⁻¹ absorption band and the 250-cm⁻¹ Raman band. Effects of replacing the NH₃ ligand with H₂O on the electronic structure, atom–atom force constants and vibrational modes of these complex ions are briefly described.     

Electron beam treatment of lignite-burning flue gas with high concentrations of sulfur dioxide and water

Experiments were carried out to investigate the removals of SO₂ and NO_x from simulated lignite-burning flue gas containing SO₂ (4800 ppm), NO (320 ppm) and H₂O (22%) by electron beam irradiation. Removal efficiencies of SO₂ and NO_x were achieved to reach 97 and 88% at 70°C, and 74 and 85% at 80°C, respectively, with the dose of 10.3 kGy without NH₃ leakage. The higher removal efficiencies of SO₂ and NO_x were observed in simulated lignite-burning flue gas than in coal-fired flue gas containing 800 ppm of SO₂, 225 ppm of NO and 7.5% H₂O at the same treatment condition. The higher removal efficiencies were attributed to the higher concentrations of SO₂, H₂O, and added NH₃. Simulation calculations indicated that the higher concentrations of these components enhance the effective radical reactions to oxidize NO to form NO₂ with HO₂ radical, and to oxidize SO₂ to form SO₃ with OH radical and O₂. The reactions of NO_x with N and NH₂ radicals to produce N₂ and N₂O also promote the NO_x removal. By-product was determined to be the mixture of (NH₄)₂SO₄ and NH₄NO₃ containing a small amount of H₂SO₄.     

基于钛锡载体的SCR低温脱硝催化剂的表面性质研究

采用共沉淀法制备TiO₂-SnO₂固溶体,浸渍法负载CeO₂得到一系列xCeO₂/TiO₂-SnO₂负载型催化剂,在模拟NH₃选择性催化还原NO_x(NH₃-SCR)反应条件下考察催化剂低温脱硝活性。通过X射线衍射(XRD)、比表面积测定(BET)、程序升温还原(H₂-TPR)、程序升温脱附(NH₃-TPD)、高分辨率透射电子显微镜(HRTEM)、原位漫反射傅里叶变换红外光谱(in situ DRIFTS)等表征技术,研究了氧化铈负载后催化剂的微观结构、表面物种的存在状态、表面酸位等表面性质及NH₃吸附特性。结果表明,Ce:Ti物质的量比为0.1时,催化剂催化脱硝反应活性最高,同时具有较宽的温度窗口(250~300℃)和热稳定性;铈的过量负载会导致催化剂比表面积减小、活性窗口变窄,同时其氧化还原能力和NH₃吸附能力也减弱。NH₃-TPD结果显示,CeO₂的负载导致催化剂NH₃在弱酸及中等酸位的吸附显著增强,与催化剂NH₃-SCR最佳反应物温度降低有关。in situ DRIFTS表明,xCeO₂/TiO₂-SnO₂催化剂的Lewis酸位和Brønsted酸位强度均明显增强,同时,在1657~1666cm^-1处出现新的Brønsted酸位,参与SCR反应的主要物质是NH₄⁺分子。     

气体再燃低NOx燃烧中NO与NHi的反应机理研究

采用量子化学密度泛函理论(DFT)对NO与NH_i自由基的反应机理进行了研究,并结合经典过渡态理论对各反应速率常数进行了计算。结果表明,NO与NH₂自由基的反应体系可通过六个反应通道形成N₂+H₂O、N₂O+H₂和N₂H+OH。从能量变化和反应速率两方面考虑,产物N₂+H₂O最容易生成,其最佳反应通道为NO+NH₂→→N₂+H₂O;NO与NH自由基的反应体系可通过七个反应通道形成N₂+OH、N₂O+H和N₂H+O;其中,N₂+OH最容易生成,最佳反应通道为NO+NH→→N₂+OH。比较发现, NH比NH₂自由基更易与NO发生反应生成N₂。因此,在实际运行中改变操作条件,实现NH₂等向NH方向转化,有利于NO_x的还原。     

CuSO4(ZnSO4)-CO(NH2)2-H2O三元体系在30℃时的等温溶度研究

报道了CuSO₄(ZnSO₄)-CO(NH₂)₂-H₂O两个三元体系在30℃时的等温溶度及饱和溶液的折光率,绘制了相应的溶度图和折光率-组成图.两个三元体系中分别形成了组成为CuSO₄·3CO(NH₂)₂·H₂O(异成分溶解)和ZnSO₄·CO(NH₂)·2H₂O(同成分溶解)的化合物,并通过元素分析、红外光谱、X射线粉末衍射及热分析对新相进行了表征.     

Structure and stability of thiourea with water, DFT and MP2 calculations

The relative stabilities of thiourea in water are investigated computationally by considering thiourea–water complexes containing up to 1–6 water molecules (CS(NH₂)₂(H₂O)_n=1–6) using density functional theory and MP2 ab initio molecular orbital theory. The results show that the thiourea complex is stable and has an unusually high affinity for incoming water molecules. The clusters are progressively stabilized by the addition of water molecules, as indicated by the increasing of the binding energy. The binding energy of the cluster to each H₂O molecule is about 33 kJ mol⁻¹ for n=1–5.The C–S bond, N–C bond distance, Mulliken populations and binding energy keep approximately constant as the clusters increase in size with an increasing number of H₂O molecules. As the solvation progresses, the C–S distance increases monotonically while the Mulliken populations on the C–S bond reduces monotonically with the addition of each H₂O molecule, indicating that the C–S bond of the thiourea unit in the clusters is de-stabilized with an increasing number of H₂O molecules. Charge transfers for the clusters are mainly found at N, S atoms of the thiourea.     

Third-order Optical Nonlinearities of a Series of Compounds Derived from a Keplerate Type Molybdenum-oxide-based Polyoxometalate

Abstract By reacting the unique Keplerate type molybdenum-oxide based polyoxometalate （NH4）42·[MoI320372·（CH3COO）30（H2O）y2]·ca.300H2·ca. 10CH3COONH4（1） with tetramethylammonium bromide, a new derivative （NH4）26[TMA]16{MoI32O372（H2O）72（CH3COO）30}·ca.7NH4CH3COO·ca.189H2O（2, TMA=tetramethylammonium） was prepared. Compound 2 was characterized by Fourier transform infrared spectroscopy（FTIR）, UV-Vis, elemental and thermogravimetric analyses. By the well-established Z-scan technique, investigations on the nonlinear opti- cal（NLO） properties of the series of compounds derived from the Keplerate type molybdenum-oxide-based poly- oxometalate, namely, the newly prepared compound 2, the three previously reported compounds, included compound 1, （NH4hs（TBA）24{Mo132O372（H2O）72（CH3COO）30}·ca.7NH4CH3COO·ca. 173H2O（3, TBA=tetrabutylammonium） and （DODA）40（NH4）2[（H2O）nMo132O372（CH3COO）3o（H20）72]（4, DODA=dimethyldioctadecylammonium）, reveal that the third-order nonlinearity[x（3）] values of compounds 1, 2 and 3 in the DMF/H2O solution and compound 4 in chloro- form are almost the same, which indicates that the counter cations with different length of alkyl chains show ignora- ble impacts on the NLO susceptibility. In other words, the remarkable third-order nonlinearities[x（3）≈10 19 m2/V2] mainly come from the [MoI32O372（CH3COO）30（H2O）72]42 anions. This fact reveals that the applications of the NLO active polyoxometalates in various environments（such as hydrophilic, hydrophobic, polar, apolar, etc.） can be achieved by simply varying cations to meet the demands in the design of diverse devices. Keywords Keplerate type polyoxometalate; Nonlinear optical property; Z-Scan technique; Self-defocusing; Reverse saturable absorption     

Ab initio calculations of the vibrational spectra of the ammonia and fluoramide complexes with HF

The structures, energetics, vibrational frequencies and IR intensities of the H₃N HF, H₃N F₂ and NH₂FHF (three isomers) complexes were examined using the self-consistent field method within the 6-311G^** basis set. The interaction energies were calculated using the MP2 approach. The results are compared with monomer calculations and experimental data. The complex NH₂FHF was found to exist in three forms: one with the HF molecule hydrogen bonded to the nitrogen lone pair of NH₂F (D₀ =7.403 kcal mol⁻¹), another a complex formed through the F atom lone pair (D₀=4.698 kcal mol⁻¹) and third a cyclic structure (D₀=5.644 kcal mol⁻¹).     

Synthesis and X-ray crystal structures of bis(bis(μ2-2-aminoethanolato–N,O,O)–cobalt(III))–cobalt(II) hydrate, tris(biscyclohexylammonium)μ-hydroxo–bis(μ2-nitro–N,O)–hexanitro–dicobaltate(III) and biscyclohexylammonium nitrate(III)

Two new cobalt complexes: Co₃(NO₂)₄(NH₂CH₂CH₂O)₄·H₂O (1) and (NH₂(C₆H₁₁)₂)₃[Co₂(NO₂)₈OH]·3H₂O (2) and the compound (NH₂(C₆H₁₁)₂)NO₂ (3) were synthesised and their structures have been determined using single-crystal X-ray diffraction. Compound 1 consists of two centrosymmetrical trinuclear complexes and a water molecule of crystallization. Ligands coordinated to Co atoms are nitro and aminoethanolato groups. Structure 2 is built up of biscyclohexylammonium cations, dinuclear anions with hydroxo and nitro groups coordinated to Co atoms and water molecules. The coordination of Co atoms in both structures is roughly octahedral.     

8-羟基喹啉合十钒酸盐的研究(Ⅲ)——锂、钾、铵盐的合成、鉴定与性质

在合成与研究钠盐的基础上^[1,2],我们又合成了锂、钾和铵盐,通过元素分析、分子量测定、质谱分析、X射线衍射、紫外和红外吸收光谱分析和热重分析确定了新化合物的组成与化学式并推测了化合物的结构式。     

Modelling of calcium sulphate solubility in concentrated multi-component sulphate solutions

The chemistry of several calcium sulphate systems was successfully modelled in multi-component acid-containing sulphate solutions using the mixed solvent electrolyte (MSE) model for calculating the mean activity coefficients of the electrolyte species. The modelling involved the fitting of binary mean activity, heat capacity and solubility data, as well as ternary solubility data. The developed model was shown to accurately predict the solubility of calcium sulphate from 25 to 95 °C in simulated zinc sulphate processing solutions containing MgSO₄, MnSO₄, Fe₂(SO₄)₃, Na₂SO₄, (NH₄)₂SO₄ and H₂SO₄. The addition of H₂SO₄ results in a significant increase in the calcium sulphate solubility compared to that in water. By increasing the acid concentration, gypsum, which is a metastable phase above 40 °C, dehydrates to anhydrite, and the conversion results in a decrease in the solubility of calcium sulphate. In ZnSO₄–H₂SO₄ solutions, it was found that increasing MgSO₄, Na₂SO₄, Fe₂(SO₄)₃ and (NH₄)₂SO₄ concentrations do not have a pronounced effect on the solubility of calcium sulphate. From a practical perspective, the model is valuable tool for assessing calcium sulphate solubilities over abroad temperature range and for dilute to concentrated multi-component solutions.     

Hemocompatibility of poly(vinylidene fluoride) membrane grafted with network-like and brush-like antifouling layer controlled via plasma-induced surface PEGylation

In this work, the hemocompatibility of PEGylated poly(vinylidene fluoride) (PVDF) microporous membranes with varying grafting coverage and structures via plasma-induced surface PEGylation was studied. Network-like and brush-like PEGylated layers on PVDF membrane surfaces were achieved by low-pressure and atmospheric plasma treatment. The chemical composition, physical morphology, grafting structure, surface hydrophilicity, and hydration capability of prepared membranes were determined to illustrate the correlations between grafting qualities and hemocompatibility of PEGylated PVDF membranes in contact with human blood. Plasma protein adsorption onto different PEGylated PVDF membranes from single-protein solutions and the complex medium of 100% human plasma were measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Hemocompatibility of the PEGylated membranes was evaluated by the antifouling property of platelet adhesion observed by scanning electron microscopy (SEM) and the anticoagulant activity of the blood coagulant determined by testing plasma-clotting time. The control of grafting structures of PEGylated layers highly regulates the PVDF membrane to resist the adsorption of plasma proteins, the adhesion of platelets, and the coagulation of human plasma. It was found that PVDF membranes grafted with brush-like PEGylated layers presented higher hydration capability with binding water molecules than with network-like PEGylated layers to improve the hemocompatible character of plasma protein and blood platelet resistance in human blood. This work suggests that the hemocompatible nature of grafted PEGylated polymers by controlling grafting structures gives them great potential in the molecular design of antithrombogenic membranes for use in human blood.     

Liquid–liquid and liquid–liquid–solid equilibrium in Na2CO3–PEG–H2O

The phase diagram was determined for the Na₂CO₃–PEG–H₂O system at 25°C using PEG (poly(ethylene glycol)) with a molecular weight of 4000. Compositions of the liquid–liquid and the liquid–liquid–solid equilibria were determined using calibration curves of density and index of refraction of the solutions, and atomic absorption (AA) and X-ray diffraction analyses were made on the solids. The solid phase in equilibrium with the biphasic region was Na₂CO₃·H₂O. Binodal curves were described using a three-parameter equation. Tie lines were described using the Othmer–Tobias and Bancroft correlation’s. Correlation coefficients for all equations exceeded 0.99. The effects of temperature (25 and 40°C) and the molecular weight of the PEG (2000, 3000, and 4000) on the binodal curve were also studied, and it was observed that the size of the biphasic region increased slightly with an increase in these variables.     

Mn/Ce-ZrO2催化剂低温NH3-SCR脱硝性能研究

采用浸渍法制备了三种具有不同载体的锰基NH₃低温选择性催化还原(NH₃-SCR)催化剂Mn/Ce-ZrO₂、Mn/P₂₅和Mn/Al₂O₃。研究了三种催化剂低温SCR脱硝活性及抗H₂O、抗SO₂性能,并采用XRD、NH₃-TPD和H₂-TPR手段对催化剂的物理化学性质进行表征。结果表明,在无H₂O和SO₂存在的情况下,三种催化剂的低温SCR催化活性均比较高。相对来说,Mn/Ce-ZrO₂在低温段(100~160℃)活性更高,Mn/P₂₅在高温段(160~220℃)活性更高,这与两种催化剂的氧化还原性质有关。H₂-TPR表征表明,Mn/Ce-ZrO₂更容易发生氧化还原反应,而Mn/P₂₅还原峰对应的温度较高、面积较大。三种催化剂均有很高的低温抗水性能。另外,Mn/Ce-ZrO₂的抗H₂O、抗SO₂性能最好,而Mn/P₂₅的抗H₂O、抗SO₂性能最差。Mn/Ce-ZrO₂具有较好的抗H₂O、抗SO₂性能是由于其具有较多的表面酸位点,且表面生成的硫铵盐不稳定。