Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

Biomass‐Derived Porous Carbon with Micropores and Small Mesopores for High‐Performance Lithium–Sulfur Batteries

Biomass‐derived porous carbon BPC‐700, incorporating micropores and small mesopores, was prepared through pyrolysis of banana peel followed by activation with KOH. A high specific BET surface area (2741 m² g^?1), large specific pore volume (1.23 cm³ g^?1), and well‐controlled pore size distribution (0.6–5.0 nm) were obtained and up to 65 wt % sulfur content could be loaded into the pores of the BPC‐700 sample. When the resultant C/S composite, BPC‐700‐S65, was used as the cathode of a Li–S battery, a large initial discharge capacity (ca. 1200 mAh g^?1) was obtained, indicating a good sulfur utilization rate. An excellent discharge capacity (590 mAh g^?1) was also achieved for BPC‐700‐S65 at the high current rate of 4 C (12.72 mA cm^?2), showing its extremely high rate capability. A reversible capacity of about 570 mAh g^?1 was achieved for BPC‐700‐S65 after 500 cycles at 1 C (3.18 mA cm^?2), indicating an outstanding cycling stability.     

Nanostructured Carbon/Antimony Composites as Anode Materials for Lithium‐Ion Batteries with Long Life

A series of nanostructured carbon/antimony composites have been successfully synthesized by a simple sol–gel, high‐temperature carbon thermal reduction process. In the carbon/antimony composites, antimony nanoparticles are homogeneously dispersed in the pyrolyzed nanoporous carbon matrix. As an anode material for lithium‐ion batteries, the C/Sb10 composite displays a high initial discharge capacity of 1214.6 mAh g^?1 and a reversible charge capacity of 595.5 mAh g^?1 with a corresponding coulombic efficiency of 49 % in the first cycle. In addition, it exhibits a high reversible discharge capacity of 466.2 mAh g^?1 at a current density of 100 mA g^?1 after 200 cycles and a high rate discharge capacity of 354.4 mAh g^?1 at a current density of 1000 mA g^?1. The excellent cycling stability and rate discharge performance of the C/Sb10 composite could be due to the uniform dispersion of antimony nanoparticles in the porous carbon matrix, which can buffer the volume expansion and maintain the integrity of the electrode during the charge–discharge cycles.     

Calcium-organic frameworks cathode for high-stable aqueous Zn/organic batteries

Rechargeable aqueous zinc-ion batteries (AZIBs) are attracting tremendous attention because of their intrinsic merits such as high safety and low cost. Cathode plays a critical role in enhancing the electrochemical performance of AZIBs. However, it is difficult to design a robust and high-efficiency cathode material and further implement the commercialization of AZIBs. Metal-organic frameworks (MOFs) electroactive compounds are attractive to serve as the cathode of AZIBs due to their unique porosity and crystal structures, resource renewability and structural diversity. In this work, a calcium-pure terephthalates acid framework (Ca-PTA·3H₂O) was synthesized by facile hydrolysis and cationic exchange method, then explored as a novel cathode for AZIBs. The results highlight a high specific capacity of 431 mAh/g (0.51 mAh/cm²) at a current density of 50 mA/g, and excellent cycle performance with capacity retention of ∼90% after 2700 cycles at 500 mA/g. The following up characterizations investigate the reversible zinc storage mechanism in detail. This experiment made a specific contribution to the exploration of the new MOF as a competitive cathode for AZIBs.     

Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries

A tin oxide-titanium oxide/graphene (SnO₂-TiO₂/G) ternary nanocomposite as high-performance anode for Li-ion batteries was prepared via a simple reflux method. The graphite oxide (GO) was reduced to graphene nanosheet, and the SnO₂-TiO₂ nanocomposites were evenly distributed on the graphene matrix in the SnO₂-TiO₂/G nanocomposite. The as-prepared SnO₂-TiO₂/G nanocomposites were employed as anode materials for lithium-ion batteries, showing an outstanding performance with high reversible capacity and long cycle life. The composite delivered a superior initial discharge capacity of 1,594.6 mAh g^?1 and a reversible specific capacity of 1,500.3 mAh g^?1 at a current density of 100 mA g^?1. After 100 cycles, the reversible discharge capacity was still maintained at 1,177.4 mAh g^?1 at a current density of 100 mA g^?1 with a high retained rate of reversible capacity of 73.8 %. The addition of small amount of TiO₂ nanoparticles improved the cycling stability and specific capacity of SnO₂-TiO₂/G nanocomposite, obviously. The results demonstrate that the SnO₂-TiO₂/G nanocomposite is a promising alternative anode material for practical Li-ion batteries.     

A Nanostructured Si/SiOC Composite Anode with Volume-Change-Buffering Microstructure for Lithium-Ion Batteries

Si/SiOC composites are promising high-capacity anode materials for lithium-ion batteries since the SiOC matrix can effectively buffer the volumetric change of Si during cycling. However, a structure of Si nanoparticles (NPs) enwrapped by a continuous SiOC phase typically shows poor cyclic stability and low charge/discharge rate due to structure failure of bulk SiOC shells derived from carbon-rich organosilicon. To address this issue, in this work, an Si/SiOC nanocomposite with volume-change-buffering microstructure, in which Si NPs are uniformly dispersed in a matrix of SiOC nanospheres, has been synthesized. Our results show that the space between Si and SiOC NPs can accommodate the large volume change of Si during cycling and facilitate infiltration of the electrolyte. The nanostructured SiOC skeleton serves as both a mechanically robust buffer to alleviate the intrinsic expansion of Si and an effective electron conductor. The Si/SiOC NP composite displays significantly increased capacity and cyclic stability compared with pure SiOC, and delivers reversible capacities of around 800 mA h⁻¹ g⁻¹ at a current density of 100 mA g⁻¹ (approximately 100 % capacity retention after 100 cycles) and around 600 mA h⁻¹ g⁻¹ at 500 mA g⁻¹ (capacity retention about 80 % after 500 cycles).     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

Layer-By-Layer (LBL) hybrid MOF coating for graphene-based multilayer composite: Synthesis and application as anode for lithium ion batteries

The hybrid anodic materials with high porosity and low charge resistance exhibit high specific capacity and stable cyclic stability for lithium ion battery (LIBs). For this purpose, three-dimensional hollow material, metal organic framework (MOF-199) was coated over the active surface of oxidized derivative of graphene (Graphene oxide, GO), via layer-by-layer (LBL) coating method. Cupric acetate and benzene-1,3,5-tricarboxylic acid [Cu₃(BTC)₂], were alternatively coated on the active surface of GO as an anode material, to enhance the structural diversity and reduce the synergistic effect of insertion and extraction of Li⁺ ions for LIBs. Sharp absorption peaks from 1620 cm⁻¹ to 1360 cm⁻¹ and intense ring bends ∼1000 cm⁻¹ was identified through FTIR. Powder XRD provides the evidence for size reduction of Cu₃(BTC)₂@GO composite (32.6 nm) comparative to GO (43.7 nm). Outcome of EIS analysis shows the charge transfer resistance of simple GO is 2410 Ω, which is 4 times higher than R_ct of Cu₃(BTC)₂@GO composite (590 Ω). Similarly the Warburg impedance co-efficient for simple GO (448.8 Ωs^−1/2) is also higher than A_w of Cu₃(BTC)₂@GO composite (77.64 Ωs^−1/2). The synthesized material show high initial charge/discharge capacity, 1200/1420 mAh/g with 85% Coulombic efficiency and reversible discharge capacity, 1296 mAh/g after 100 cycles at 100 mA/g current density. The 98.9% Coulombic efficiency and 91% retaining capacity of composite at 100th cycle with cyclic stability, provides the phenomenon approach towards the rechargeable LIBs for industrial technology.     

Agar-derived nitrogen-doped porous carbon as anode for construction of cost-effective lithium-ion batteries

Balancing cost and performance of porous carbon (PC) as anode for lithium-ion battery (LIBs) is the key to effectively promote commercial application. Herein, low-cost N-doped PC (NPC-Ts, T = 600, 750 and 900 °C) were facilely prepared in batches via one-pot pyrolysis of agar with different carbonization temperature. The NPC-750 with specific surface area of 2914 m²/g and N content of 2.84% exhibits an ultrahigh reversible capacity of 1019 mAh/g at 0.1 A/g after 100 cycles and 837 mAh/g at 1 A/g after 500 cycles. Remarkably, the resulting LIBs exhibit an ultrafast charge-discharge feature with a remarkable capacity of 281 mAh/g at 10 A/g and a superlong cycle life with a capacity retention of 87% after 5000 cycles at 10 A/g. Coupling with LiFePO₄ cathode, the fabricated lithium-ion full cells possess high capacity, excellent rate and cycling performances (125 mAh/g at 100 mA/g, capacity retention of 95%, after 220 cycles), highlighting the practicability of this NPC-750 as the anode materials.     

Fabrication of a Practical and Polymer‐Rich Organic Radical Polymer Electrode and its Rate Dependence

A practical and polymer‐rich organic radical cathode that contains 80 wt.‐% poly(4‐vinyloxy‐2,2,6,6‐tetramethylpiperidine‐N‐oxyl) (PTVE) and 15 wt.‐% vapor‐grown carbon fiber (VGCF) has been fabricated. The PTVE/VGCF composite electrode shows a reversible redox peak at 3.56 V (vs Li/Li⁺) in cyclic voltammetry. A coin‐type cell with the PTVE/VGCF composite electrode as the cathode and lithium metal as the anode has also been fabricated and used for charge/discharge measurements. When the cell was discharged at 0.3 mA · cm⁻² (1 C), a capacity of 104 mAh · g⁻¹, which is 77% of PTVE's theoretical capacity (135 mAh · g⁻¹), was obtained. When it was discharged at 9.0 mA · cm⁻² (30 C), its capacity was 52% of the capacity it had when it was discharged at 0.3 mA · cm⁻² (1 C). Even when discharged at 24 mA · cm⁻² (80 C), it surprisingly had 32% of the capacity it had when discharged at 0.3 mA · cm⁻². The observed rate dependence shows that the polymer‐rich electrode could discharge over 50% of the cell capacity in two minutes and over 30% within one minute.

     

Amidation-Dominated Re-Assembly Strategy for Single-Atom Design/Nano-Engineering: Constructing Ni/S/C Nanotubes with Fast and Stable K-Storage

An amidation-dominated re-assembly strategy is developed to prepare uniform single atom Ni/S/C nanotubes. In this re-assembly process, a single-atom design and nano-structured engineering are realized simultaneously. Both the NiO₅ single-atom active centers and nanotube framework endow the Ni/S/C ternary composite with accelerated reaction kinetics for potassium-ion storage. Theoretical calculations and electrochemical studies prove that the atomically dispersed Ni could enhance the convention kinetics and decrease the decomposition energy barrier of the chemically-absorbed small-molecule sulfur in Ni/S/C nanotubes, thus lowering the electrode reaction overpotential and resistance remarkably. The mechanically stable nanotube framework could well accommodate the volume variation during potassiation/depotassiation process. As a result, a high K-storage capacity of 608 mAh g⁻¹ at 100 mA g⁻¹ and stable cycling capacity of 330.6 mAh g⁻¹ at 1000 mA g⁻¹ after 500 cycles are achieved.     

High capacity silicon/carbon composite anode materials for lithium ion batteries

Silicon/carbon composite materials are prepared by pyrolysis of pitch embedded with graphite and silicon powders. As anode for lithium ion batteries, its initial reversible capacity is 800–900 mAh/g at 0.25 mA/cm² in a voltage range of 0.02/1.5 V vs. Li. The material modification by adding a small amount of CaCO₃ into precursor improves the initial reversibility (η₁=84%) and suppresses the capacity fade upon cycling. A little higher insertion voltage of the composites than commercial CMS anode material improves the cell safety in the high rate charging process.     

A 3D Hydroxylated MXene/Carbon Nanotubes Composite as a Scaffold for Dendrite-Free Sodium-Metal Electrodes

Sodium metal is a promising anode, but uneven Na deposition with a dendrite growth seriously impedes its application. Herein, a fibrous hydroxylated MXene/carbon nanotubes (h-Ti₃C₂/CNTs) composite is designed as a scaffold for dendrite-free Na metal electrodes. This composite displays fast Na⁺/electron transport kinetics and good thermal conductivity and mechanical properties. The h-Ti₃C₂ contains abundant sodiophilic functional groups, which play a significant role in inducing homogeneous nucleation of Na. Meanwhile, CNTs provide high tensile strength and ease of film-forming. As a result, h-Ti₃C₂/CNTs exhibit a high average Coulombic efficiency of 99.2 % and no dendrite after 1000 cycles. The h-Ti₃C₂/CNTs/Na based symmetric cells show a long lifespan over 4000 h at 1.0 mA cm⁻² with a capacity of 1.0 mAh cm⁻². Furthermore, Na-O₂ batteries with a h-Ti₃C₂/CNTs/Na anode exhibit a low potential gap of 0.11 V after an initial 70 cycles.     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

A Yolk–Shell Structured Silicon Anode with Superior Conductivity and High Tap Density for Full Lithium‐Ion Batteries

The poor cycling stability resulting from the large volume expansion caused by lithiation is a critical issue for Si‐based anodes. Herein, we report for the first time of a new yolk–shell structured high tap density composite made of a carbon‐coated rigid SiO₂ outer shell to confine multiple Si NPs (yolks) and carbon nanotubes (CNTs) with embedded Fe₂O₃ nanoparticles (NPs). The high tap density achieved and superior conductivity can be attributed to the efficiently utilised inner void containing multiple Si yolks, Fe₂O₃ NPs, and CNTs Li⁺ storage materials, and the bridged spaces between the inner Si yolks and outer shell through a conductive CNTs “highway”. Half cells can achieve a high area capacity of 3.6 mAh cm^?2 and 95 % reversible capacity retention after 450 cycles. The full cell constructed using a Li‐rich Li₂V₂O₅ cathode can achieve a high reversible capacity of 260 mAh g^?1 after 300 cycles.     

A 3D Hydroxylated MXene/Carbon Nanotubes Composite as a Scaffold for Dendrite‐Free Sodium‐Metal Electrodes

Sodium metal is a promising anode, but uneven Na deposition with a dendrite growth seriously impedes its application. Herein, a fibrous hydroxylated MXene/carbon nanotubes (h‐Ti₃C₂/CNTs) composite is designed as a scaffold for dendrite‐free Na metal electrodes. This composite displays fast Na⁺/electron transport kinetics and good thermal conductivity and mechanical properties. The h‐Ti₃C₂ contains abundant sodiophilic functional groups, which play a significant role in inducing homogeneous nucleation of Na. Meanwhile, CNTs provide high tensile strength and ease of film‐forming. As a result, h‐Ti₃C₂/CNTs exhibit a high average Coulombic efficiency of 99.2 % and no dendrite after 1000 cycles. The h‐Ti₃C₂/CNTs/Na based symmetric cells show a long lifespan over 4000 h at 1.0 mA cm^?2 with a capacity of 1.0 mAh cm^?2. Furthermore, Na‐O₂ batteries with a h‐Ti₃C₂/CNTs/Na anode exhibit a low potential gap of 0.11 V after an initial 70 cycles.     

Polydopamine-mediated synthesis of Si@carbon@graphene aerogels for enhanced lithium storage with long cycle life

The application of Si as the anode materials for lithium-ion batteries (LIBs) is still severely hindered by the rapid capacity decay due to the structural damage caused by large volume change (> 300%) during cycling. Herein, a three-dimensional (3D) aerogel anode of Si@carbon@graphene (SCG) is rationally constructed via a polydopamine-assisted strategy. Polydopamine is coated on Si nanoparticles to serve as an interface linker to initiate the assembly of Si and graphene oxide, which plays a crucial role in the successful fabrication of SCG aerogels. After annealing the polydopamine is converted into N-doped carbon (N-carbon) coatings to protect Si materials. The dual protection from N-carbon and graphene aerogels synergistically improves the structural stability and electronic conductivity of Si, thereby leading to the significantly improved lithium storage properties. Electrochemical tests show that the SCG with optimized graphene content delivers a high capacity (712 mAh/g at 100 mA/g) and robust cycling stability (402 mAh/g at 1 A/g after 1500 cycles). Furthermore, the full cell using SCG aerogels as anode exhibits a reversible capacity of 187.6 mAh/g after 80 cycles at 0.1 A/g. This work provides a plausible strategy for developing Si anode in LIBs.     

High electro-catalytic graphite felt/MnO<Subscript>2</Subscript> composite electrodes for vanadium redox flow batteries

A mild and simple synthesis process for large-scale vanadium redox flow batteries (VRFBs) energy storage systems is desirable. A graphite felt/MnO₂ (GF-MNO) composite electrode with excellent electrocatalytic activity towards VO²⁺/VO₂⁺ redox couples in a VRFB was synthesized by a one-step hydrothermal process. The resulting GF-MNO electrodes possess improved electrochemical kinetic reversibility of the vanadium redox reactions compared to pristine GF electrodes, and the corresponding energy efficiency and discharge capacity at 150 mA cm^?2 are increased by 12.5% and 40%, respectively. The discharge capacity is maintained at 4.8 A h L^?1 at the ultrahigh current density of 250 mA cm^?2. Above all, 80% of the energy efficiency of the GFMNO composite electrodes is retained after 120 charge-discharge cycles at 150 mA cm^?2. Furthermore, these electrodes demonstrated that more evenly distributed catalytic active sites were obtained from the MnO₂ particles under acidic conditions. The proposed synthetic route is facile, and the raw materials are low cost and environmentally friendly. Therefore, these novel GFMNO electrodes hold great promise in large-scale vanadium redox flow battery energy storage systems.