Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

Physicochemical studies of bioactive heterocycles of some novel imidazole derivatives as sensitive NLO materials

Some novel imidazole derivatives were developed as highly sensitive chemisensors for transition metal ions. A prominent fluorescence enhancement was found in the presence of transition metal ions such as Hg(2+), Pb(2+), Cu(2+), Zn(2+), Co(2+) and Fe(2+) and this was suggested to result from the suppression of radiationless transitions from the n-π* state in the chemisensors. By DFT calculation HOMO-LUMO energies were calculated, the electric dipole moment (μ) and the hyperpolarizability (β) of the investigated molecules have been studied experimentally and also theoretically. These synthesized molecules were found to have microscopic non-linear optical (NLO) behaviour with non-zero tensor components.     

Thermodynamics of exchange in clays: Ion exchange equilibria of transition metals and sodium ions on illite

Ion exchange equilibria of bivalent transition metal ions have been studied at 20, 30 and 45°C on illite surface. The exchange isotherms and free energy changes indicate a higher preference of the illite surface for the metal ions. Cd²⁺ and Mn²⁺ ions were preferred throughout the entire range while reversal of behaviour occurred during Cu²⁺, Zn²⁺ and Co²⁺ ions exchange on the illite surface. Enthalpy changes suggested a stronger preference of transition metal ions for the illite surface. Entropy changes indicated an increase in the order of system. The surface phase coefficients of the cations showed that with increasing metal ion saturationf _m continuously increases whilef _Na decreases. The excess thermodynamic functions snowed that the exchange reactions were non-ideal.     

Transition Metal Ions: Charge Carriers that Mediate the Electron Capture Dissociation Pathways of Peptides

Electron capture dissociation (ECD) of model peptides adducted with first row divalent transition metal ions, including Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, were investigated. Model peptides with general sequence of ZGGGXGGGZ were used as probes to unveil the ECD mechanism of metalated peptides, where X is either V or W; and Z is either R or N. Peptides metalated with different divalent transition metal ions were found to generate different ECD tandem mass spectra. ECD spectra of peptides metalated by Mn²⁺ and Zn²⁺ were similar to those generated by ECD of peptides adducted with alkaline earth metal ions. Series of c-/z-type fragment ions with and without metal ions were observed. ECD of Fe²⁺, Co²⁺, and Ni²⁺ adducted peptides yielded abundant metalated a-/y-type fragment ions; whereas ECD of Cu²⁺ adducted peptides generated predominantly metalated b-/y-type fragment ions. From the present experimental results, it was postulated that electronic configuration of metal ions is an important factor in determining the ECD behavior of the metalated peptides. Due presumably to the stability of the electronic configuration, metal ions with fully-filled (i.e., Zn²⁺) and half filled (i.e., Mn²⁺) d-orbitals might not capture the incoming electron. Dissociation of the metal ions adducted peptides would proceed through the usual ECD channel(s) via “hot-hydrogen” or “superbase” intermediates, to form series of c-/z ^•- fragments. For other transition metal ions studied, reduction of the metal ions might occur preferentially. The energy liberated by the metal ion reduction would provide enough internal energy to generate the “slow-heating” type of fragment ions, i.e., metalated a-/y- fragments and metalated b-/y- fragments.     

Hetero-binuclear chelates of Mn(II), Co(II) and Cu(II) o-cresolphthalein complexonates with other metal ions

Heterobinuclear metal chelates of Mn²⁺, Co²⁺ or Cu²⁺ and some transition metal ions with o-cresolphthalein complexone have been prepared and characterized. Elemental analyses are in agreement with proposed formulae. Thermal analyses (TGA and DTA) were used to determine the degradation products; some thermodynamic parameters were calculated. IR and UV-Vis spectra identified the mode of bonding between the metal ions and the ligand as well as its geometry. Magnetic moment determination and ESR spectra of the heterobinuclear complex revealed some antiferromagnetic interaction between the metal ions, which depends mainly on the two metal ions forming the chelate. Electrochemical studies of the complexes [DC-polarography and cyclic voltammetry (CV)] confirmed the existence and the nature of the metal ions in the chelate.     

Influence of the central metal on the crystal structures and electronic structures of biferrocene trinuclear complexes

Five metal-bridged biferrocene complexes of the Schiff-base ligand (HL = S-benzyl-N-(ferrocenyl-1-methyl-methylidene)dithiocarbazate) have been studied by single crystal X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy. The crystal structures of the complexes show that the central metal ions are tetra-coordinated by two ligands in two modes: the central d⁸ transition metal ions (Ni²⁺, Pd²⁺, and Pt²⁺) are nearly square-planar coordinated and the d¹⁰ transition metal ions (Zn²⁺ and Cd²⁺) are tetrahedrally coordinated. Interestingly, the isomer shifts in ⁵⁷Fe Mössbauer spectroscopy are also of two kinds: d⁸ transition metal ions (0.097-0.247 mm/s) and d¹⁰ transition metal ions (0.416-0.435 mm/s).     

Transition‐Metal‐Ion‐Mediated Polymerization of Dopamine: Mussel‐Inspired Approach for the Facile Synthesis of Robust Transition‐Metal Nanoparticle–Graphene Hybrids

Inspired by the high transition‐metal‐ion content in mussel glues, and the cross‐linking and mechanical reinforcement effects of some transition‐metal ions in mussel threads, high concentrations of nickel(II), cobalt(II), and manganese(II) ions have been purposely introduced into the reaction system for dopamine polymerization. Kinetics studies were conducted for the Ni²⁺–dopamine system to investigate the polymerization mechanism. The results show that the Ni²⁺ ions could accelerate the assembly of dopamine oligomers in the polymerization process. Spectroscopic and electron microscopic studies reveal that the Ni²⁺ ions are chelated with polydopamine (PDA) units, forming homogeneous Ni²⁺–PDA complexes. This facile one‐pot approach is utilized to construct transition‐metal‐ion–PDA complex thin coatings on graphene oxide, which can be carbonized to produce robust hybrid nanosheets with well‐dispersed metallic nickel/metallic cobalt/manganese(II) oxide nanoparticles embedded in PDA‐derived thin graphitic carbon layers. The nickel–graphene hybrid prepared by using this approach shows good catalytic properties and recyclability for the reduction of p ‐ nitrophenol.     

Metal‐Ion‐Mediated Tuning of Duplex DNA Binding by Bis(2‐(2‐pyridyl)‐1H‐benzimidazole)

Studies of double‐stranded‐DNA binding have been performed with three isomeric bis(2‐(n‐pyridyl)‐1H‐benzimidazole)s (n=2, 3, 4). Like the well‐known Hoechst 33258, which is a bisbenzimidazole compound, these three isomers bind to the minor groove of duplex DNA. DNA binding by the three isomers was investigated in the presence of the divalent metal ions Mg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺. Ligand–DNA interactions were probed with fluorescence and circular dichroism spectroscopy. These studies revealed that the binding of the 2‐pyridyl derivative to DNA is dramatically reduced in the presence of Co²⁺, Ni²⁺, and Cu²⁺ ions and is abolished completely at a ligand/metal‐cation ratio of 1:1. Control experiments done with the isomeric 3‐ and 4‐pyridyl derivatives showed that their binding to DNA is unaffected by the aforementioned transition‐metal ions. The ability of 2‐(2‐pyridyl)benzimidazole to chelate metal ions and the conformational changes of the ligand associated with ion chelation probably led to such unusual binding results for the ortho isomer. The addition of ethylenediaminetetraacetic acid (EDTA) reversed the effects completely.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Highly selective in situ metal ion determination by hybrid electrochemical "adsorption-desorption" and colorimetric methods

A novel and facile hybrid analytical method coupling electrochemical “adsorption–desorption” and colorimetric analyses was developed to detect heavy metal ions in turbid water samples. The target metal ions were deposited onto an electrode inserted into the original sample, which was referred to as the “adsorption” process. After changing the medium, the concentrated target metal ions were dissolved in a new, clean buffer (blank buffer), which was referred to as the “desorption” process. The concentrations of the target metal ions were measured by colorimetric analyses after the addition of specific indicator amounts. We demonstrated the applicability of this method by detecting Cd²⁺, Pb²⁺ and Cu²⁺ with co-depositing Bi³⁺ on portable screen-printed electrodes (SPEs). A good correlation (correlation coefficient of R = 0.997) was observed between concentrations ranging from 1 to 200 μM and absorbance values. After the multiple “desorption” process, the even better detection limits as low as 10, 10 and 100 nM were achieved for Cd²⁺, Pb²⁺ and Cu²⁺, respectively. The practicality of this hybrid method was confirmed by the detection of Cd²⁺, Pb²⁺ and Cu²⁺ in wastewater samples, and these results were in agreement with inductively coupled plasma atomic emission spectroscopy (ICP-AES). Overall, this hybrid method provides a simple, selective and effective technique for environmental pollutant analyses.     

Lanthanide/zinc centered photoactive hybrids with functional sulfonamide linkage: Coordination bonding assembly,characterization and photophysical properties

In this paper, two novel kinds of organic–inorganic monomer, SUA-APEMS and SUA-APS, have been achieved by modifying 5-sulfosalicylic acid (SUA) with 3-aminopropyl-methyl-diethoxylsilane (APEMS) and 3-aminopropyl trimethoxysilane (APS). These two organic–inorganic monomers were used as multi-functional bridged components, which can coordinate to metal ions (Tb³⁺/Eu³⁺/Zn²⁺) with carbonyl groups, strongly absorb ultraviolet and effectively transfer energy to metal ions through their triplet excited state, as well as involve in the sol–gel process with inorganic host precursor tetraethoxysilane (TEOS), resulting two series of molecular hybrid materials (named as SUA-APEMS/APS-RE) with double chemical bond (RE(Zn)–O coordination bond and Si–O covalent bond). The effective intra-molecular energy transfer process gives rise to the characteristic emission of metal ions and the chemical bond make the hybrid materials owning better properties.     

Synthesis of poly(hydroxamic acid) ligand from polymer grafted corn‐cob cellulose for transition metals extraction

Poly(hydroxamic acid) ligand was synthesized using ester functionalities of cellulose‐graft‐poly(methyl acrylate) copolymer, and products are characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy analysis. The poly(hydroxamic acid) ligand was utilized for the sensing and removal of transition metal ions form aqueous solutions. The solution pH is found a key factor for the optical detection of metal ions, and the reflectance spectra of the [Cu‐ligand]ⁿ⁺ complex were observed to be the highest absorbance 99.5% at pH 6. With the increase of Cu²⁺ ion concentration, the reflectance spectra were increased, and a broad peak at 705 nm indicated that the charge transfer (π‐π transition) complex was formed. The adsorption capacity with copper was found to be superior, 320 mg g^?1, and adsorption capacities for other transition metal ions were also found to be good such as Fe³⁺, Mn²⁺, Co³⁺, Cr³⁺, Ni²⁺, and Zn²⁺ were 255, 260, 300, 280, 233, and 223 mg g^?1, respectively, at pH 6. The experimental data show that all metal ions fitted well with the pseudo‐second‐order rate equation. The sorption results of the transition metal ions onto ligand were well fitted with Langmuir isotherm model (R² > 0.98), which implies the homogenous and monolayer character of poly(hydroxamic acid) ligand surface. Eleven cycles sorption/desorption process were applied to verify the reusability of this adsorbent. The investigation of sorption and extraction efficiency in each cycle indicated that this new type of adsorbent can be recycled in many cycles with no significant loss in its original detection and removal capability. Copyright © 2016 John Wiley & Sons, Ltd.     

Transition Metal Ions or Acid-induced Suppression of Photoinduced Proton Transfer and Electron Transfer Reaction in 5-(4-Fluorophenyl)-2-hydroxypyridine: A Molecule of Dual Mode Fluorosensitivity

The photophysical properties of 5-(4-fluorophenyl)-2-hydroxypyridine (FP2HP) at different pH and its fluorescence response toward different transition metal ions have been studied by steady-state absorption and emission spectroscopy in combination with quantum chemical calculations. Although keto-enol tautomerization is observed in the excited state, the molecule is weakly fluorescent due to the presence of electron-rich nitrogen atom and relatively electron-deficient fluorine atom, which may lead to photoinduced electron transfer process. In the presence of the transition metal ions, such as Zn²⁺, Cd²⁺, Hg²⁺, etc., the studied molecule exhibits changes in its absorption and emission properties. The present system shows fluorescence enhancement instead of usual quenching in presence of the transition metal ions, such as Fe²⁺ and Cu²⁺. Spectral observation leads to the interpretation that this structurally simple molecule can be effectively utilized as a chelation-enhanced fluorescence-based chemosensor for the detection of transition metal ions. The experimental findings corroborate well with theoretical calculations at Hartree–Fock level using 6-31G** and lanl2dz basis sets.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Control of a photoswitching chelator by metal ions: DFT,NBO, and QTAIM analysis

Ability of aroylhydrazones to change conformation upon interaction with light makes them promising candidates for molecular switches. Isomerization can be controlled through complexation with selected metal ions which bind with different affinity. N′‐[1‐(2‐hydroxyphenyl)ethyliden]iso‐nicotinoylhydrazide (HAPI) is an example of a dual‐wavelenght photoswitching molecule, whose complexation with metal ions was recently experimentally investigated (Franks et al. J. Inorg. Chem. 2014, 53, 1397). In this contribution, complexes between HAPI and K⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Cu⁺, Cu²⁺, and Zn²⁺ ions were investigated using Density Functional Theory, Natural Bond Order analysis, and Quantum Theory of Atoms in Molecules. The most important parameters that determine complex stability are found to be ion radius and charge transferred from ligands to the ion: smaller ion radii and larger CT values characterize formation of more stable complexes. Our results explain experimentally observed effect of different metal ions on photoisomerization through determination of metal ion affinity (MIA): photoisomerization is inhibited if MIA exceeds 100 kcal/mol; for MIA between 50 and 100 kcal/mol excess of metal ions prevents isomerization, whereas in case of MIA below 50 kcal/mol metal ions have no influence on light–HAPI interaction. © 2015 Wiley Periodicals, Inc.     

Complexing Properties of Phenolic Diazacrown Ethers with Transition and Heavy Metal Ions

The complexation equilibria of the phenolic diazacrown ether derivatives L1–L11 with transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺) have been studied in methanol using UV absorption spectrophotometry. A majority of the systems studied formed only ML complexes. Using a ligand with a different position of the substituents on the phenolic side arms (denoted L7) leads to ML₂ formation with most of the metal ions. Every ligand forms very strong ML and ML₂ complexes with Pb²⁺, and, in nearly all cases, only a lower limit could be derived for the stability constant. The stability of the complexes generally increases as the length of the para-substituents on the phenol groups increases. Among the metal ions tested, Zn²⁺ and Hg²⁺ are the least preferred by alkyl and alkoxy derivatives, respectively.     

Transition metal ions in black tea: an electron paramagnetic resonance study

Tea (Camellia Sinensis) is the most widely consumed beverage in the world and is known to have therapeutic, antioxidant and nutritional effects. It contains dimeric flavanols and polyphenols which are known as the most important organic compounds in tea infusions, and can make strong and stable complexes with metal ions. In this study, we carried out a series of electron paramagnetic resonance experiments on well-known paramagnetic transition metal ions, namely Mn²⁺, Fe³⁺, Cu²⁺, VO²⁺, and Cr³⁺ doped in black tea cultivated along the shore of Black Sea, Turkey, to see the effects and structures formed.     

Structural characterization of alachlor complexes with transition metal ions by electrospray ionization tandem mass spectrometry

Electrospray ionization mass (ESI-MS) spectrometry was used to investigate the nature of metal complexes of alachlor and their dissociations on activation. Ions of the first row transition metal series were employed to react with alachlor and the products were subjected to collision-induced dissociation (CID) for further structural characterization. The formation of diverse complex ions including doubly charged metal/alachlor complexes; [3L + M]²⁺ and [4L + M]²⁺ (L: alachlor and M: transition metal ions) were observed depending on the experimental conditions including the tube lens offset voltage (TLOV) and relative concentrations of alachlor and transition metal ions. It is clear that complexation with transition metal ions alters the reactive site of alachlor, promoting the loss of chlorine over the loss of CH₃OH that is the major reaction pathway in uncomplexed system. Direct elimination of chlorine from alachlor molecule was confirmed by the use of MnBr₂ instead of MnCl₂. These evidences clearly illustrate the catalytic activities of the metal ions through insertion mechanism. The function of transition metal ions in complexation was emphasized comparing the fragmentation patterns with those of protonated molecule. A change in the oxidation state of copper from + 2 to + 1 during the dissociation of metal complex was observed in company with elimination of radicals which is specific for the copper complex ions.     

Study of Host-Guest Complexation of Alkaline Earth Metal Ion,Aluminum Ion and Transition Metal Ions with Crown Ethers by Fast Atom Bombardment Mass Spectrometry

Complexations of crown ethers with alkali metal ions have been investigated extensively by FAB mass spectrometry over the past decade, but very little attention has been paid to reactions of crown ethers with other classes of metal ions such as alkaline earth metal ions, transition metal ions and aluminum ions. Although fast atom bombardment ionization mass spectrometry has proven to be a rapid and convenient method to determine the binding interactions of crown ethers with metal ions, problems in reliabilities for quantitative measurements of” binding strength for the host-guest complexes have been described in the literature. Thus, in this paper, applications of FAB/MS for investigating the complexation of crown ethers with various classes of metal ions is discussed. Extensive fragmentations for neutral losses such as C₂H₄O or C₂H₄ molecules from the host-guest complexes could be observed. The reason is attributed to the energetic bombardment processes of FAB occuring in the formation of these complexes. Complexes of cyclen with metal ions also show neutral losses of C₂H₄NH molecules leading to fragment ions. Transition metal ions usually form (Crown + MCl)⁺ type of ions, alkaline earth metal ions can form both (Crown + MCl)⁺ and (Crown + MOH)⁺ type of ions. But for aluminum ions, only (Crown + Al(OH)₂)⁺ type of ions could he observed.     

Stability of transition metal complexes with sulfonated polymers

Stability constants of macromolecular metallocomplexes of transition metal ions (Ag⁺, Cu²⁺, Ni²⁺, Fe³⁺) with sulfonated polymers in water and aqueous HCl and NaCl solutions were determined from quenching by transition metal ions of the luminescence of macromolecules labeled with luminescent groups.