Green synthesis of silver nanoparticles using seed extract of Jatropha curcas

An eco-friendly process for rapid synthesis of silver nanoparticles has been reported using aqueous seed extract of Jatropha curcas. Formation of stable silver nanoparticles at different concentration of AgNO₃ gives mostly spherical particles with diameter ranging from 15 to 50 nm. The resulting silver particles are characterized using HRTEM, XRD and UV–vis spectroscopic techniques. XRD study shows that the particles are crystalline in nature with face centered cubic geometry.     

Synthesis of highly stable silver nanoparticles using imidazolium-based ionic liquid

Highly stable, aqueous dispersions, and hydrophilic ionic liquid-capped silver nanoparticles with positive surface charge were synthesized by in situ reduction of AgNO₃ with NaBH₄ in the presence of an imidazolium-based ionic liquid, viz., 1-dodecyl-3-methylimidazolium chloride ([C₁₂mim][Cl]) at room temperature. Prepared silver nanoparticles were characterized by UV–vis spectra, transmission electron microscopy (TEM), and zeta potential. UV–visible spectrum of the aqueous medium peaked at 407 nm corresponding to the plasmon absorbance of silver nanoparticles. TEM analysis revealed the spherical shape of the particles with sizes about 9 nm and low polydispersed. The surface charge of the synthesized silver nanoparticles was determined as +5.0 mV. The ionic liquid ([C₁₂mim][Cl]) capped silver nanoparticles were stable for at least 8 months.     

Biosynthesis, purification and characterization of silver nanoparticles using Escherichia coli

The application of nanoscale materials and structures, usually ranging from 1 to 100 nanometers (nm), is an emerging area of nanoscience and nanotechnology. Nanomaterials may provide solutions to technological and environmental challenges in the areas of solar energy conversion, catalysis, medicine, and water-treatment. The development of techniques for the controlled synthesis of nanoparticles of well-defined size, shape and composition, to be used in the biomedical field and areas such as optics and electronics, has become a big challenge. Development of reliable and eco-friendly processes for synthesis of metallic nanoparticles is an important step in the field of application of nanotechnology. One of the options to achieve this objective is to use ‘natural factories’ such as biological systems. This study reports the optimal conditions for maximum synthesis of silver nanoparticles (AgNPs) through reduction of Ag⁺ ions by the culture supernatant of Escherichia coli. The synthesized silver nanoparticles were purified by using sucrose density gradient centrifugation. The purified sample was further characterized by UV–vis spectra, fluorescence spectroscopy and TEM. The purified solution yielded the maximum absorbance peak at 420 nm and the TEM characterization showed a uniform distribution of nanoparticles, with an average size of 50 nm. X-ray diffraction (XRD) spectrum of the silver nanoparticles exhibited 2θ values corresponding to the silver nanocrystal. The size-distribution of nanoparticles was determined using a particle-size analyzer and the average particle size was found to be 50 nm. This study also demonstrates that particle size could be controlled by varying the parameters such as temperature, pH and concentration of AgNO₃.     

Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction

Silver nanoparticles were synthesized by UV irradiation of [Ag(NH₃)₂]⁺ aqueous solution using poly(N-vinyl-2-pyrrolidone) (PVP) as both reducing and stabilizing agents. The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima around 420 nm. It was found that the formation rate of silver nanoparticles from Ag₂O was much quicker than that from AgNO₃, and the absorption intensity increased with PVP concentration as well as irradiation time. The maximum absorption wavelength (λ_max) was blue shift with increasing PVP content until 8 times concentration of [Ag(NH₃)₂]⁺ (wt%). The transmission electron microscopy (TEM) showed the resultant particles were 4–6 nm in size, monodisperse and uniform particle size distribution. X-ray diffraction (XRD) demonstrated that the colloidal nanoparticles were the pure silver. In addition, the silver nanoparticles prepared by the method were stable in aqueous solution over a period of 6 months at room temperature (25 °C).     

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers were prepared by atmospheric plasma treatment and electrospinning. Atmospheric helium plasma treatment was first used to reduce the AgNO₃ precursor in pre-electrospinning solutions into metallic silver nanoparticles, followed by electrospinning into continuous and smooth nanofibers with Ag nanoparticles embedded in the matrix. SEM, TEM, and EDX spectra were used to study the structure and surface elemental composition of the nanofibers. Silver nanoparticles, with diameters ranging between 3 and 6 nm, were found to be uniformly dispersed in the nanofiber matrix. The Ag/PAN nanofibers exhibited slow and long-lasting silver ion release, which provided robust antibacterial activity against both Gram-positive Bacillus cereus and Gram-negative Escherichia coli microorganisms.     

光催化合成金属Ag纳米颗粒的生长机制——晶核密度控制的生长模式转换

利用AgNO₃水溶液,通过严格控制TiO₂薄膜的化学活性,系统研究了在TiO₂表面光催化合成金属Ag纳米颗粒的生长行为。研究发现,光催化合成金属Ag纳米颗粒存在着两个完全不同的生长机制,分别对应着金属Ag纳米颗粒的各向同性和各向异性生长。当溶液浓度较低时,Ostwald熟化（OR）机制主导着金属Ag纳米颗粒的长大过程;当溶液浓度较高时,取向附生（OA）机制决定着金属Ag纳米颗粒长大成纳米片。原位消光光谱分析表明,OR机制和OA机制生长的前期具有相近消光特征,决定金属Ag纳米颗粒生长模式的关键是AgNO₃溶液的浓度,更准确地说是金属Ag初级晶核的局域密度。在此基础上提出了有关光催化合成金属Ag纳米颗粒的生长模型。     

Green synthesis and formulation a modern chemotherapeutic drug of Spinacia oleracea L. leaf aqueous extract conjugated silver nanoparticles; Chemical characterization and analysis of their cytotoxicity,antioxidant, and anti-acute myeloid leukemia properties in comparison to doxorubicin in a leukemic mouse model

There is an increasing commercial demand for nanoparticles due to their wide applicability in various areas such as electronics, catalysis, chemistry, energy, and medicine. Recently, researchers have tried to synthesize the chemotherapeutic drugs from metallic nanoparticles especially gold and silver nanoparticles. In the current study, silver nanoparticles using Spinacia oleracea L. leaf aqueous extract (AgNPs) are reported for the first time to exert a dietary remedial property compared to doxorubicin in an animal model of acute myeloid leukemia. The synthesized AgNPs were characterized using different techniques including UV-Vis., EDS, TEM, FT-IR, and FE-SEM. UV-Vis. indicates an absorption band at 462 nm that is related to the surface plasmon resonance of AgNPs. In EDS, metallic silver nanocrystals indicated an optical absorption peak at roughly 4keV. TEM and FE-SEM images exhibited a uniform spherical morphology and diameters of 20–40 nm for the nanoparticles. FT-IR findings suggested antioxidant compounds in the nanoparticles were the sources of reducing power, reducing silver ions to AgNPs. In vivo design, induction of acute myeloid leukemia was done by 7,12-Dimethylbenz[a]anthracene in 75 mice. Then, the animals were randomly divided into six subgroups, including control, untreated, AgNO₃, S. oleracea, AgNPs, and doxorubicin. Similar to doxorubicin, AgNPs significantly (p ≤ 0.01) reduced the pro-inflammatory cytokines, and the total WBC, blast, neutrophil, monocyte, eosinophil, and basophil counts and increased the weight of the body, the anti-inflammatory cytokines and the lymphocyte, platelet, and RBC parameters as compared to the untreated mice. DPPH free radical scavenging test was done to evaluate the antioxidant potentials of AgNO₃, S. oleracea, AgNPs, and doxorubicin. DPPH test revealed similar antioxidant potentials for doxorubicin and AgNPs. For the analyzing of cytotoxicity effects of AgNO₃, S. oleracea, AgNPs, and doxorubicin, MTT assay was used on HUVEC, Human HL-60/vcr, 32D-FLT3-ITD, and Murine C1498 cell lines. AgNPs similar to doxorubicin had low cell viability dose-dependently against Human HL-60/vcr, 32D-FLT3-ITD, and Murine C1498 cell lines without any cytotoxicity on HUVEC cell line. These results reveal that the inclusion of S. oleracea leaf aqueous extract improves the remedial effects of AgNPs, which led to a significant enhancement in the antioxidant, cytotoxicity, and anti-acute myeloid leukemia potentials of the nanoparticles. It seems that AgNPs can be applied as a chemotherapeutic supplement or drug for the treatment of acute myeloid leukemia in the clinical trial.     

Partially positively charged silver nanoparticles prepared by p-benzoquinone

Partially positively charged silver nanoparticles were successfully prepared by interaction between p-benzoquinone and the surface of the nanoparticles. This result was primarily due to electron affinity of the carbonyl group in p-benzoquinone, as confirmed by FT-IR and X-ray photoelectron spectroscopy (XPS). In this study, p-benzoquinone acted as both a stabilizer and a reducing agent for silver nanoparticles. UV–vis spectra showed the formation of silver nanoparticles. TEM micrographs confirmed that most of silver nanoparticles exist in sizes less than 7 nm, and the average size of particle aggregates is approximately 20 nm.     

对苯乙烯磺酸钠改性炭黑对天然橡胶胶乳力学性能的影响

在Haake转矩流变仪的热机械作用下,用对苯乙烯磺酸钠(NASS)对炭黑进行预处理,制备了在水介质中具有优异的分散稳定性的亲水性纳米炭黑粒子(PNASS-CB),并将其直接用于天然橡胶胶乳的补强研究.1HNMR和FT-IR结果表明NASS在炭黑表面成功聚合包覆,用热重分析方法计算其包覆率为8.1 wt%,接枝率为2.5 wt%.亲水性炭黑的表面自由能降低,同时,Payne效应和结合胶含量表明亲水性炭黑粒子与橡胶的相互作用强于亲水性炭黑粒子之间的相互作用.因此,亲水性炭黑/天然橡胶胶乳复合材料的硫化时间变短,转化速度加快,硫化胶的撕裂强度提高了85%,拉伸强度提高了30%,断裂伸长率提高了20%.     

Rapid Synthesis of Silver Nanoparticles by Microwave-Polyol Method with the Assistance of Latex Copolymer

Highly stable and monodispersed silver nanoparticles with uniform morphology have been successfully prepared by microwave (MW) irradiation within a few seconds from the mixture of silver nitrate, ethanol and latex copolymer. The aqueous emulsion of latex copolymer acts as both reducing and stabilizing agent. To the best of our knowledge, it was the first time that the effect of MW irradiation time and latex concentration on the silver nanoparticle preparation and properties was analyzed. The formation of silver nanoparticles was confirmed by Ultraviolet–visible spectroscopy and transmission electron microscopy (TEM). The UV–Vis spectra are marked by the characteristic surface plasmon absorption band in the range 410–420 nm. From TEM images, silver nanoparticles were observed to be spherical with sizes ranging from 4 to 10 nm. Electron diffraction patterns on selected area, indicated that the silver nanoparticles are crystalline with face centered cubic structure.     

Colorimetric detection of cadmium in water using L-cysteine Functionalized gold–silver nanoparticles

Abstract

A new simple colorimetric assay was developed for the selective and sensitive detection of cadmium (II) in water samples using L-cysteine functionalized gold–silver nanoparticles. The gold–silver nanoparticles were synthesized by reducing HAuCl₄ and AgNO₃ in aqueous medium and were further functionalized with L-cysteine. The formation of homogeneous gold–silver nanoparticles was characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, particle size distribution, and ultraviolet–visible absorption methods. In the presence of cadmium (II), the aggregation of functionalized gold–silver nanoparticles caused by the interaction between cadmium (II) and L-cysteine resulted in a naked-eye visible color change of L-cysteine functionalized gold–silver nanoparticles from orange–yellow to green, which can be monitored by a simple ultraviolet–visible spectrophotometer. Under the optimal conditions, the absorbance ratio at 600–435?nm (A₆₀₀/A₄₃₅) was linear to the concentration of cadmium (II) from 0.4 to 38.6?μM, and the limit of detection of cadmium (II) was 44?nM. Interference measurements showed that the method exhibited good selectivity. The proposed method was successfully applied to the determination of cadmium (II) in environmental water samples. The results indicated that this simple, selective, and sensitive sensing system has good potential for practical applications.     

Silver Metallic Nanoparticles with Surface Plasmon Resonance: Synthesis and Characterizations

Silver nanoparticles were synthesized by the reduction of the silver nitrate (AgNO₃) using the latex copolymer in ethanol solution under microwave (MW) heating. The reaction parameters such as silver precursor concentration (from 0.005 to 0.1 g/l) and MW power (200–800 W) significantly affect the formation rate, shape, size and distribution of the silver nanoparticles. A significant reduction of irradiation time was observed when the MW energy is compared to conventional thermal reduction processes. The prepared silver nanoparticles show uniform and stable sizes from 5 to 11 nm, which can be stored at room temperature for approximately 12 months without any visible change. These peculiarities indicate that the latex copolymer is a good stabilizer for the silver nanoparticles. The optical properties, morphology, and crystalline structure of the silver-latex copolymer nanocomposites were characterized by the Ultraviolet–Visible spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The study of the TEM images at high magnifications identified the silver nanoparticles as face-centered cubic (fcc) structure with spherical and hexagonal shapes.     

In situ formation of silver nanoparticles within an amphiphilic graft copolymer film

Silver nanoparticles were prepared by UV irradiation from silver salts, such as AgBF₄ or AgNO₃, when dissolved in an amphiphilic film of poly((oxyethylene)₉ methacrylate)‐graft‐poly((dimethyl siloxane)_n methacrylate), POEM‐g‐mPDMS. The in situ formation of silver nanoparticles in the graft copolymer film was confirmed by transmission electron microscopy (TEM), UV‐visible spectroscopy, and wide angle X‐ray scattering (WAXS). The results demonstrated that the use of AgBF₄ yielded silver nanoparticles with a smaller size (～5 nm) and narrower particle distribution when compared with AgNO₃. The formation of silver nanoparticles was explained in terms of the interaction strength of the silver ions with the ether oxygens of POEM, as revealed by differential scanning calorimetry (DSC) and X‐ray photoelectron spectroscopy (XPS). It was thus concluded that a stronger interaction of silver ions with the ether oxygens results in a more stable formation of silver nanoparticles, which produces uniform and small‐sized nanoparticles. DSC and small angle X‐ray scattering (SAXS) data also showed the selective incorporation and in situ reduction of the silver ions within the hydrophilic POEM domains. Excellent mechanical properties of the nanocomposite films (3–5 × 10⁵ dyn/cm²) were observed, mostly because of the confinement of silver nanoparticles in the POEM chains as well as interfaces created by the microphase separation of the graft copolymer film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1283–1290, 2007     

Synthesis and characterization of novel four-arm star PDMAEMA-stabilized colloidal silver nanoparticles

Spontaneous formation and efficient stabilization of colloidal silver nanoparticles were achieved in aqueous four-arm star poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) solution at ambient temperature in the absence of any other reducing agent. In this reaction, four-arm star PDMAEMA acted as both reducing and stabilizing agents for silver nanoparticles. More importantly, four-arm star PDMAEMA is a tertiary-amine-containing star homopolymer, which shows that the scope of the reducing and stabilizing agents for metal nanoparticles can be extended from the general homopolymers and the block copolymers to the water-soluble simple tertiary-amine-containing star homopolymers. Fourier transform infrared, UV–vis absorption spectroscopy, and transmission electron microscopy were used to characterize the synthetic silver nanoparticles. A plausible mechanism for the formation of silver nanoparticles was proposed in the presence of linear and star PDMAEMA homopolymers. Moreover, the size of the resultant silver nanoparticles can be easily tuned by changing the concentrations of AgNO₃.     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Antibacterial Effectiveness of Rice Water (Starch)‐Capped Silver Nanoparticles Fabricated Rapidly in the Presence of Sunlight

Green synthesized silver nanoparticles (AgNPs) have enormous applications. Hence, there is an increasing demand to explore diverse bioresources for AgNP fabrication to make the process more cost‐effective and rapid as possible. Due to the abundantly present hydroxyl groups of rice starch, it provides ideal sites for metal ion complexation and thereby synthesis of nanoparticles with promising activity. So the study was designed to develop rapid, eco‐friendly and cost‐effective method for green AgNP synthesis using boiled rice water starch in the presence of sunlight irradiation. The starch‐capped nanoparticles (sAgNPs) formed in the study were found to have the surface plasmon absorbance at 439 nm. The study showed optimum yield of sAgNPs when 25% rice starch was treated with aqueous 1 mM AgNO₃ for 15 min in the presence of sunlight. Fourier transform infrared spectroscopy analysis provided mechanistic insight into the role of –OH groups of starch in the reduction of AgNO₃ to sAgNPs. On further characterization by X‐ray diffraction analysis, the sAgNPs were identified to have FCC crystal structure. At the same time, high‐resolution transmission electron microscopic analysis showed majority of sAgNPs to have spherical morphology, and dynamic light scattering study revealed the average particle size as 36.3 nm. Further confirmation on presence of AgNPs was carried out by energy‐dispersive X‐ray spectroscopy. Moreover, the sAgNPs exhibited promising antibacterial activity against foodborne pathogens, Salmonella Typhimurium and Staphylococcus aureus.     

光催化合成金属Ag纳米颗粒的生长机制——晶核密度控制的生长模式转换

利用AgNO3水溶液,通过严格控制TiO2薄膜的化学活性,系统研究了在TiO2表面光催化合成金属Ag纳米颗粒的生长行为。研究发现,光催化合成金属Ag纳米颗粒存在着两个完全不同的生长机制,分别对应着金属Ag纳米颗粒的各向同性和各向异性生长。当溶液浓度较低时,Ostwald熟化(OR)机制主导着金属Ag纳米颗粒的长大过程;当溶液浓度较高时,取向附生(OA)机制决定着金属Ag纳米颗粒长大成纳米片。原位消光光谱分析表明,OR机制和OA机制生长的前期具有相近消光特征,决定金属Ag纳米颗粒生长模式的关键是AgNO3溶液的浓度,更准确地说是金属Ag初级晶核的局域密度。在此基础上提出了有关光催化合成金属Ag纳米颗粒的生长模型。     

一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

柠檬酸辅助可控制备花状银粒子及其表面增强拉曼散射性能

以抗坏血酸为还原剂,柠檬酸为结构导向剂,一步还原硝酸银,合成了尺寸和形状可调的花状银颗粒。纳米粒子的粒径可在600～1 200 nm范围内调整,表面突起可达到10～25 nm。柠檬酸的化学性质在银纳米粒子合成多级花状银结构的过程中起着至关重要的作用。通过改变柠檬酸或抗坏血酸溶液的用量,银结构的各向异性形貌可以很容易地调节。以制备的多级花状银颗粒作为表面增强拉曼散射(SERS)基底,对浓度为10~(-10)mol·L~(-1)的罗丹明6G(R6G)仍具有较高的检测灵敏度。     

Silver ion reduction with peat fulvic acids

Formation of silver nanoparticles in chemical reduction of AgNO₃ with peat fulvic acids in an aqueous alkali solution was studied spectrophotometrically. The size of the resulting nanoparticles and their stability were examined in relation to the reaction temperature and time, and concentrations of fulvic acids and silver nitrate.