AB型两亲聚L-谷氨酸-苄酯-聚乙二醇嵌段共聚物的合成与表征

利用L 谷氨酸和苯甲醇反应制备了L 谷氨酸 苄酯 ,然后将其与三聚光气反应制备了N 羧基 L 谷氨酸 环内酸酐 (NCA) .以聚乙二醇单甲醚 (MPEG)为原料 ,制备了端氨基聚乙二醇单甲醚 (MPEG NH2 ) ,并以此作为引发剂 ,引发NCA开环聚合 ,合成了不同分子量的聚L 谷氨酸 苄酯 聚乙二醇单甲醚 (PBGM )嵌段共聚物 .利用IR、1 H NMR、DSC、GPC等方法对共聚物结构进行了表征 .结果表明 ,MPEG NH2 引发NCA开环聚合得到的是嵌段共聚物 ,通过1 H NMR谱得到共聚物组成及数均分子量 ;随着共聚物中MPEG含量的增高 ,聚L 谷氨酸 苄酯的亲水性有所改善     

聚谷氨酸苄酯-聚乙二醇嵌段共聚物的合成和表征

通过嵌段共聚技术,合成了聚γ－苄基L－谷氨酸（PBLG）作为疏水性链段－聚乙二醇（PEG）作为亲水性链段的嵌段共聚物。用对甲苯磺酸酯化－氨水皂化法合成带有端氨基的聚乙二醇（AT－PEG）,光气－甲苯液相法制备谷氨酸苄酯－N－羟酸酐（BLG－NCA）。用AT－PEG引发BLG－NCA聚合制备PBLG－PEG或PBLG－PEG－PBLG,通过不同的单体、引发剂浓度比调节聚合物分子量。用GPC、^1HNMR、IR对聚合物的结构进行了表征。结果表明,带有端氨基的聚乙二醇确实能引发BLG－NCA生成PBLG和PEG的嵌段共聚物,产物中几乎没有残存的PEG,共聚物的分子量可控。     

两亲嵌段共聚物聚乙二醇-聚谷氨酸苄酯纳米粒药物载体的合成研究

用磺酸酯法制备单端氨基聚乙二醇引发剂,引发谷氨酸苄酯羧酸酐开环聚合,生成可生物降解的两亲嵌段共聚物聚乙二醇﹣聚谷氨酸苄酯(PEG-PBLG),用IR,NMR和GPC表征了共聚物。用超微透析法制备PEG-PBLG聚合物纳米粒,荧光芘探针法测定纳米粒的临界聚集浓度(cac)。紫外分光光度计考察纳米粒对疏水性药物的增溶作用,PEG-PBLG可作为亚微粒药物输送系统的载体。     

聚(L-谷氨酸γ-苄酯)-聚四氢呋喃-聚(L-谷氨酸γ-苄酯)三嵌段共聚物的合成与表征

聚氨基酸是一类低毒性、生物相容性良好、易被机体吸收和代谢的可降解合成高分子材料，在药物控释载体、组织工程支架、生物材料表面改性方面得到了广泛应用．但其降解周期及降解速度通常难以控制，应用受到一定限制．通过共聚方法将生物相容和亲水性良好的聚乙二醇（PEG）引入聚氨基酸链段中形成两亲性嵌段共聚物旧，研究其自组装行为，及作为基因转染和药物控释载体等已成为高分子科学领域新的研究热点．     

二维核磁共振法研究线型聚乙二醇与树枝状聚苄醚形成的三嵌段共聚物

嵌段共聚物是由几个不同的高分子链段通过化学键相连所构成的 .在合成方法上一般是通过几类不同的活性聚合 ,调控单体的加料次序或者通过不同的大分子链段末端的反应活性点偶联而成[1～ 3 ] .所形成的化学键将嵌段共聚物中不相溶的几段相连 ,于是在特定的条件下就产生了微相分离的现象 ,继而可以在 1 0～ 1 0 0nm尺度范围内形成各种各样的微区结构[4,5] .在过去的几十年里 ,研究的重点是认定嵌段共聚物的微区结构和研究微相分离的动力学 ,已发表了大量重要的结果 ,至今仍然是高分子科学中的热门课题 .非常重要的一点是 ,正是由于不同的高分…     

聚乙二醇-聚L-丙交酯嵌段共聚物结晶形貌研究

用偏光显微镜和原子力显微镜对比研究了PEG-PLLA嵌段共聚物在110℃或120℃等温结晶后的结晶形貌.发现在110℃时只有PEG5000-PLLA2300和PEG5000-PLLA6300在偏光显微镜下呈现环带球晶形貌,在原子力显微镜高度图中显示明显的环带,并具有交替凸凹起伏形貌.而PEG5000-PLLA12000球晶中没有出现环带形貌而是生成了规则的环线.在120℃时,PEG5000-PLLA12000的球晶中才生成了规则的环带图案,原子力显微镜也显示了其球晶具有明显的交替凸凹起伏形貌,说明过冷度直接影响环带球晶的生成.产生周期性凸凹起伏和明暗交替消光是由片晶沿着球晶的半径方向周期性扭转造成的,片晶在凸起部分是Edge-on取向,在凹下部分是Flat-on取向.     

聚乙二醇-聚二氧六环酮嵌段共聚物的合成及表征

用辛酸亚锡［Ｓｎ（Ｏｃｔ）２］作催化剂，进行了端羟基聚乙二醇（ＰＥＧ）和１，４ 二氧六环酮（ＤＯＮ）的共聚反应，得到嵌段共聚物ＰＤＯＮ ｂ ＰＥＧ ｂ ＰＤＯＮ．根据１Ｈ ＮＭＲ谱图计算结果表明共聚物组成随两组分投料比而改变．共聚物的ＤＳＣ结果表明嵌段共聚物中ＰＤＯＮ的熔点和结晶度的变化相对较小，而ＰＥＧ的熔点及结晶度均有较大降低．将ＰＥＧ引入可大大提高材料的吸水率．     

PBLG-PEG-PBLG嵌段共聚物的合成及其CHO细胞毒性

PBLG-PEG-PBLG嵌段共聚物的合成及其CHO细胞毒性;聚谷氨酸苄酯;聚乙二醇;嵌段共聚物;细胞毒性     

一种两亲生物降解高分子-聚丙交酯-聚乙二醇嵌段共聚物的研究进展

PLA-PEG良好的生物相容和降解性能在生物医学领域受到了广泛关注，对其性能和应用已经有了深入的研究。就PLA-PEG这一类两亲生物降解高分子的合成、性能作一简介，并对其在组织工程，药物控释以及靶向载体等方面的应用和前景作一综述和展望。     

聚丙交酯/聚乙二醇多嵌段共聚物的合成及其性能

聚丙交酯 (ＰＬＬＡ)由于具有良好的生物降解性和生物相容性 ,在医学领域已经得到了广泛的临床应用 ,近来又被制备成细胞支架大量应用于组织工程中[1,2 ] ,但由于其疏水性而造成细胞亲和性不好 .聚乙二醇 (ＰＥＧ)具有良好的亲水性 ,良好的生物相容性 ,但是ＰＥＧ是非降解性的 ,只有低分子量的ＰＥＧ可以被吞噬细胞所吞噬或透过肾滤膜而排出体外 ,因此 ,低分子量的ＰＥＧ常被用来与丙交酯 (Ｌ ＬＡ)共聚以改善ＰＬＬＡ支架的亲水性 .聚丙交酯 聚乙二醇共聚物 (ＰＬＥ)的三嵌段及两嵌段共聚物的合成及其性能的研究已被广泛报道[3～ 5] .研究…     

Miscibility and spherulite growth kinetics in the poly(ethylene oxide)/poly(benzyl methacrylate) system

This study for the first time discovered miscibility in the binary blend of semicrystalline poly(ethylene oxide) (PEO) with amorphous poly(benzyl methacrylate) (PBzMA). Differential scanning calorimetry, optical and scanning electron microscopy, and infrared spectroscopy were performed to characterize and demonstrate miscibility in the PEO/PBzMA system. The glass‐transition behavior and Fourier transform infrared results suggest that the intermolecular interactions between the pairs were likely nonspecific and at best comparable to those among the same constituent component. The melting‐point depression study yielded χ = −0.1, indicating a relatively low interaction strength. It is concluded that the phase behavior of the blend was miscibility with nonspecific interactions, mostly a matched polar–polar intermolecular attraction. PEO spherulitic crystallization in the blend is discussed to support the miscibility behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 562–572, 2000     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Polycaprolactone–poly(ethylene glycol) block copolymer,I: synthesis and degradability in vitro

A new type of biodegradable polymer material, poly(caprolactone)–poly(ethylene glycol) block copolymer (PCL-b-PEG), was synthesized by means of direct copolycondensation of ε-caprolactone with poly(ethylene glycol) in the presence of a Ti(OBu)₄ catalyst. The degradability of the polycaprolactone was improved by introducing a PEG component into it. The degradation of PCL-b-PEG copolymer increase with a decreasing crystallinity of the copolymer, and can be controlled by adjusting the component ratio of the copolymer.     

Hydrolytic degradation of polyester–polyether block copolymer based on polycaprolactone/poly(ethylene glycol)/polylactide

Polyester–polyether block copolymers based on polycaprolactone/poly(ethylene glycol)/polylactide (PCEL) with various compositions were synthesized by direct copolymerization of ϵ‐caprolactone, L ‐lactide and PEG (6000) in the presence of stannous octoate at 130 °C for 56 hr. The degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer solution at 37 ±1 °C. Various techniques such as weight, gel permeation chromatography, ¹H nuclear magnetic resonance, differential scanning calorimetry and X‐ray diffractometry were used to monitor the changes in water absorption, weight loss, molar mass, molar mass distribution, thermal properties and compositions. The results show that the hydrophilicity of copolymer was enhanced with increasing poly(ethylene oxide) content, which led to the PEG sequences fast release and an increase in weight loss of the copolymer. Bimodal chromatograms were detected in the degradation, which were attributed to the degradation mechanism of the partial crystalline polymer proceeding predominantly in amorphous zones. Copyright © 2000 John Wiley & Sons, Ltd.     

Novel tricomponent membranes containing poly(ethylene glycol)/poly(pentamethylcyclopentasiloxane)/poly(dimethylsiloxane) domains

The synthesis and characterization of novel tricomponent networks consisting of well‐defined poly(ethylene glycol) (PEG) and poly(dimethylsiloxane) (PDMS) strands crosslinked and reinforced by poly(pentamethylcyclopentasiloxane) (PD₅) domains are described. Network synthesis occurred by dissolving α,ω‐diallyl PEG and α,ω‐divinyl PDMS prepolymers in a common solvent (toluene), introducing a stoichiometric excess of pentamethylcyclopentasiloxane (D₅H) to the charge, inducing the cohydrosilation of the prepolymers by Karstedt's catalyst and completing network formation by the addition of water. Water in the presence of the Pt‐based catalyst oxidizes the SiH groups of D₅H to SiOH functions that immediately polycondense and bring about crosslinking. The progress of cohydrosilation and polycondensation was followed by monitoring the disappearance of the SiH and SiOH functions by Fourier transform infrared spectroscopy. Because cohydrosilation and polycondensation are essentially quantitative, overall network composition can be controlled by calculating the stoichiometry of the three network constituents. The very low quantities of extractable (sol) fractions corroborate efficient crosslinking. The networks swell in both water and hexanes. Differential scanning calorimetry showed three thermal transitions assigned, respectively, to PEG (melting temperature: 46–60 °C depending on composition), PDMS [glass‐transition temperature (T_g) = ～?121 °C], and PD₅ (T_g = ～?159 °C) and indicated a phase‐separated tricomponent nanoarchitecture. The low T_g of the PD₅ phase is unprecedented. The strength and elongation of PEG/PD₅/PDMS networks can be controlled by overall network composition. The synthesis of networks exhibiting sufficient mechanical properties (tensile stress: 2–5 MPa, elongation: 100–800%) for various possible applications has been demonstrated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3093–3102, 2002     

Surface charge modulation of poly(ethylene glycol)–poly( , -lactide) block copolymer micelles: conjugation of charged peptides

Block copolymer micelles with aldehyde functionality were prepared in aqueous medium by dialyzing the N,N-dimethylacetamide solution of α-acetoxy-poly(ethylene glycol)-poly( , -lactide) block copolymer (acetal-PEG–PDLLA) against water, followed by mild acid treatment to convert the acetal moiety of the micelle to the aldehyde group. Peptidyl ligands (phenylalanine (Phe) and tyrosyl–glutamic acid (Tyr–Glu)) were then chemically conjugated to the micelle through Schiff base formation and successive reductive amination using NaBH₃CN. Micelles with peptidyl ligands thus prepared have a size of approximately 40 nm with extremely narrow distribution (μ₂/ ²<0.1) based on cumulant analysis of dynamic light scattering. A maximum 53% of the PEG-chain end of the micelle could be converted into peptidyl groups. Zeta potential values of Tyr–Glu derivatized micelles were well correlated with the amount of conjugated ligands, controllable over the range of 0 to−9 mV in sodium phosphate buffer (pH 7.4, 10 mM). These micelles with peptidyl ligands may have a utility for exploring the effect of the surface charge on the pharmacokinetic behavior of particulate systems as well as for modulated drug delivery where cellular peptidyl receptors play a substantial role.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Solution proprieties of dendritic triazine/poly(ethylene glycol)/dendritic triazine block copolymers

Dendritic–linear–dendritic triblock copolymers based on poly(ethylene glycol) (PEG) as the core and dendritic triazine blocks were synthesized. The micellar and aggregation characteristics of the compounds were investigated with NMR and fluorescence spectroscopy. The NMR investigations were carried out in a variety of solvents. In those solvents in which both moieties of the linear–dendritic compounds were completely soluble, the NMR spectra of the linear–dendritic compounds were in the normal form, and all of the signals were as expected. However, in other solvents in which one of the moieties of the compounds was not very soluble, the NMR spectra of the compounds were not in the normal form, and some of the signals were broad or disappeared. The results could be related to the aggregation behavior of the block copolymers with extended or packed conformations of PEG in the solvents, as previously observed in similar systems. Also, fluorescence investigations of some of the isolated compounds in aqueous solutions displayed micellar behavior. The critical micelle concentrations of the copolymers were determined with a fluorescence technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 28–41, 2005     

Crystallization of photo-chain extended poly(ethylene glycol)

Coumarin-functionalized poly(ethylene glycol) (PEG) monols and diols were isothermally crystallized at temperatures between 20 and 35 °C before and after exposure to approximately 110 J cm⁻² of ultra-violet A (λ > 300 nm, UVA) irradiation. Irradiation dimerized the coumarin groups and chain-extended the coumarin-functionalized PEG oligomers. The higher molecular weights reduced the crystal growth rate by as much as 50% compared to the non-irradiated coumarin-functionalized PEG oligomers under ambient crystallization conditions. Hoffman’s kinetic nucleation theory was utilized to evaluate the types of nucleation that occurred for the coumarin-functionalized PEG diols (COU-PEG-COU). Crystallization regimes II and III were observed for the coumarin-modified PEG oligomers before and after exposure to UVA light.