Stress concentration at an elliptic hole in transversely isotropic piezoelectric solids

Two-dimensional electroelastic analyses have been performed theoretically on a transversely isotropic piezoelectric material containing an elliptic hole, subjected to a uniform stress field and a uniform electric displacement field at infinity while the surface of the hole is free of traction and electrically open. Solutions are obtained by using the exact electric boundary condition based on the complex variation method. Explicit solutions for the distributions of the mechanical and electrical components on the rim of the elliptic hole are obtained. An interesting relationship between the stress concentration factor of an elliptic hole (K_t) and that of a circular hole (K_t∣_t=1), $K_t=1+\frac{K_t{\mid }_{t=1}-1}{t}$, is found in both elastic and piezoelectric materials. It is shown that the electromechanical coupling effect is helpful to reduce the stress concentration. And the influence of the dielectric parameter of the medium inside the hole on the stresses and the concerned stress concentration factor at the surface of the hole is weak in a wide range of the dielectric parameter. Comparisons with available results show good coincidence.     

Vibration of an infinite inhomogeneous transversely isotropic viscoelastic medium with cylindrical hole

This paper investigates the influences of higher order viscoelasticity and the inhomogeneities of the transversely isotropic elastic parameters on the disturbances in an infinite medium, caused by the presence of a transient radial force or twist on the surface of a cylindrical hole with circular cross section. Following Voigt＇s model for higher order viscoelasticity, the nonvanishing stress components valid for a transversely isotropic and higher order viscoelastic solid medium have been deduced in terms of radial displacement component. Considering the power law variation of elastic and viscoelastic parameters, the stress equation of motion has been developed. Solving this equation under suitable boundary conditions, due to transient forces and twists, radial displacement and relevant stress components have been determined in terms of modified Bessel functions. The problem for the presence of transient radial force has been numerically analysed. Modulations of displacement and stresses due to different order of viscoelasticity and inhomogeneity have been graphically depicted. The numerical study of the disturbance caused by the presence of twist on the surface may be similarly done but is not pursued in this paper.     

Anti-plane interaction of a crack and reinforced elliptic hole in an infinite matrix

Anti-plane interaction of a crack with a coated elliptical hole embedded in an infinite matrix under a remote uniform shear load is considered in this paper. Analytical treatment of the present problem is laborious due to the presence of material inhomogeneities and geometric discontinuities. Nevertheless, based on the technique of conformal mapping and the method of analytical continuation in conjunction with the alternating technique, general expressions for displacements and stresses in the coated layer and the matrix are derived explicitly in closed form. By applying the existing complex function solutions for a dislocation, the integral equations for a line crack are formulated and mode-III stress intensity factors are obtained numerically. Some numerical examples are given to demonstrate the effects of material inhomogeneity and geometric discontinuities on mode-III stress intensity factors.     

含椭圆孔弹性平面基本解

运用复变函数保角变换与解析延拓方法,获得含椭圆孔无限弹性平面任意位置作用集中力的基本解,并由此获得含有限长裂纹弹性平面基本解,可作为弹性力学的典型问题.该方法较以往文献更为简捷.     

Anisotropic thermopiezoelectric solids with an elliptic inclusion or a hole under uniform heat flow

The two-dimensional problem of a thermopiezoelectric material containing an elliptic inclusion or a hole subjected to a remote uniform heat flow is studied. Based on the extended Lekhnitskii formulation for thermopiezoelectricity, conformal mapping and Laurent series expansion, the explicit and closed-form solutions are obtained both inside and outside the inclusion (or hole). For a hole problem, the exact electric boundary conditions on the hole surface are used. The results show that the electroelastic fields inside the inclusion or the electric field inside the hole are linear functions of the coordinates. When the elliptic hole degenerates into a slit crack, the electroelastic fields and the intensity factors are obtained. The effect of the heat flow direction and the dielectric constant of air inside the crack on the thermal electroelastic fields are discussed. Comparison is made with two special cases of which the closed solutions exist and it is shown that our results are valid.     

Determination of mechanical response of non-linear viscoelastic solids based on frechet expansion

This paper deals with the determination of mechanical response of a non-linear viscoelastic solid based on a Fréchet expansion. In the first portion, a modified superposition principle, suggested earlier by various authors, is arrived at from a slightly different point of view. The effect of such a principle on the kernel functions and a geometric interpretation are discussed. In the later portion, the tests required for the experimental determination of the kernel functions are discussed. It is seen that besides the tests suggested by Onaran and Findley for the two-dimensional case, three additional tests are needed for the three-dimensional case to compute the response under constant combined stress.     

An extension of the time–temperature superposition principle to non-linear viscoelastic solids

An experimental data treatment is introduced to manage with the tensile test responses of highly non-linear viscoelastic solids such as solid propellants. This treatment allows the representation of a set of strain–stress curves by a single intrinsic non-linear response which is found independent of the experimental conditions of rate and temperature. To obtain this result, two independent normalization factors are applied both on the stress and strain axis. The requirement of a normalization factor applied to the strain measure produces a pseudo-strain which is found to be viscoelastic in nature. It is believed that the existence of such a viscoelastic strain measure is the characteristic feature of non-linear viscoelasticity. To confer some generality to the principle, the validity is also checked for volumetric and multiaxial stress response of solid propellant. To illustrate the potential application of the principle, it is applied to build up an idealized material database upon which numerical identification of constitutive non-linear models can be easily performed. Finally, generalization is extended to other filled elastomers such as a carbon black filled SBR.     

无限粘弹性平面中椭圆孔口变边界过程的复变函数解答

工程中存在一类几何边界随时间变化的变边界结构,例如土木工程中处于施工阶段的结构。本文以粘弹性岩体中隧道开挖为背景,尝试用变边界问题对应关系和平面弹性复变方法求取无限平面中椭圆孔口自相似变边界情况下的解析解答。首先建立了复变函数法求解变边界粘弹性问题的基本步骤和公式。然后通过建立逆映射函数将已知?平面复位势转至z平面,从而解耦参与拉普拉斯变换的时间与孔口映射函数所带来的时间,从而导出了粘弹性类材料的应力与位移的统一表达。作为一个例子,本文选择Boltzmann粘弹性模型,代入模型参数后得到积分形式的位移、应力解析解,通过与数值解的比较验证了该解答的可靠性,并通过一个算例分析了变边界过程对位移、应力的影响。分析结果显示,采用不同变边界过程的位移、应力变化形态和数值均有差别。本文解答可用于进行地下椭圆孔型隧道在开挖过程中的力学分析,为实际工程提供初步设计的手段。此外,本文给出的方法可用于推导任意形状孔型变边界问题的解答。     

A moving punch on an infinite viscoelastic layer

Summary The problem of a rigid punch pressed against and moved on the surface of an elastic or viscoelastic layer is studied. It is shown that the governing equations reduce to the same integral equation for the elastic contact problem. Two particular motions of the punch are considered. In the first case the punch moves at a constant speed along a straight line on the surface of a viscoelastic layer. In the second case the punch moves at a constant speed along a circular path. Finally, the special case of a punch moving on a layer of a standard linear viscoelastic solid is studied. The equation is identical to a punch of modified shape pressed on an elastic layer.The work presented here was supported by the National Science Foundation under Grant GK 35163 with the University of Illinois.With 1 figure     

Influence of the viscoelastic properties of a composite on the stress distribution around an elliptic hole in a plate

The time variation in the stresses around an elliptic hole in a composite plate is studied. Solutions that characterize the effect of the time dependence of the relaxation moduli of the composite components on stresses are obtained. The solutions in the time domain are obtained from the elastic–viscoelastic analogy and the corresponding elastic solutions for the effective moduli of the composite and the stress field around an elliptic hole in an anisotropic plate. The inverse Laplace transformation is carried out by an effective numerical method     

Heat conduction and thermal stress induced by an electric current in an infinite thin plate containing an elliptical hole with an edge crack

A uniform electric current at infinity was applied to a thin infinite conductor containing an elliptical hole with an edge crack. The electric current gives rise to two states, i.e., uniform and uneven Joule heat. These two states must be considered to analyze the heat conduction problem. The uneven Joule heat gives rise to uneven temperature and thus to heat flux, and to thermal stress.Using a rational mapping function, problems of the electric current, the Joule heat, the temperature, the heat flux, the thermal stress are analyzed, and each of their solutions is obtained as a closed form. The distributions of the electric current, the Joule heat, the temperature, the heat flux and the stress are shown in figures.The heat conduction problem is solved as a temperature boundary value problem. Solving the thermal stress problem, dislocation and rotation terms appear, which complicates this problem. The solutions of the Joule heat, the temperature, the heat flux and the thermal stress are nonlinear in the direction of the electric current. The crack problems are also analyzed, and the singular intensities at the crack tip of each problem are obtained. Mode II (sliding mode) stress intensity factor (SIF) is produced as well as Mode I (opening mode) SIF, for any direction of the electric current. The relations between the electric current density and the melting temperature and between the electric current density and SIF are investigated for some crack lengths in an aluminum plate.     

Magnetic field and magneto elastic stress in an infinite plate containing an elliptical hole with an edge crack under uniform electric current

Two-dimensional solutions of the electric current, magnetic field and magneto elastic stress are presented for a magnetic material of a thin infinite plate containing an elliptical hole with an edge crack under uniform electric current. Using a rational mapping function, the each solution is obtained as a closed form. The linear constitutive equation is used for the magnetic field and the stress analyses. According to the electro-magneto theory, only Maxwell stress is caused as a body force in a plate which raises a plane stress state for a thin plate and the deformation of the plate thickness. Therefore the magneto elastic stress is analyzed using Maxwell stress. No further assumption of the plane stress state that the plate is thin is made for the stress analysis, though Maxwell stress components are expressed by nonlinear terms. The rigorous boundary condition expressed by Maxwell stress components is completely satisfied without any linear assumptions on the boundary. First, electric current, magnetic field and stress analyses for soft ferromagnetic material are carried out and then those analyses for paramagnetic and diamagnetic materials are carried out. It is stated that the stress components are expressed by the same expressions for those materials and the difference is only the magnitude of the permeability, though the magnetic fields H_x, H_y are different each other in the plates. If the analysis of magnetic field of paramagnetic material is easier than that of soft ferromagnetic material, the stress analysis may be carried out using the magnetic field for paramagnetic material to analyze the stress field, and the results may be applied for a soft ferromagnetic material. It is stated that the stress state for the magnetic field H_x, H_y is the same as the pure shear stress state. Solving the present magneto elastic stress problem, dislocation and rotation terms appear, which makes the present problem complicate. Solutions of the magneto elastic stress are nonlinear for the direction of electric current. Stresses in the direction of the plate thickness are caused and the solution is also obtained. Figures of the magnetic field and stress distribution are shown. Stress intensity factors are also derived and investigated for the crack length and the electric current direction.     

Inelastic deformation of flexible cylindrical shells with an elliptic hole

The elastoplastic state of isotropic homogeneous cylindrical shells with elliptic holes and finite deflections under internal pressure is studied. Problems are formulated and numerically solved taking into account physical and geometrical nonlinearities. The distribution of stresses (displacements, strains) along the boundary of the hole and in the zone of their concentration is analyzed. The data obtained are compared with the numerical solutions of the physically nonlinear, geometrically nonlinear, and linear problems. The stress-strain state of cylindrical shells in the neighborhood of the elliptic hole is analyzed with allowance for nonlinear factors __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 5, pp. 46–54, May 2007.     

Magneto elastic stress subjected to uniform magnetic field over a thin infinite plate containing an elliptical hole with an edge crack

Two dimensional solutions of the magnetic field and magneto elastic stress are presented for a magnetic material of a thin infinite plate containing an elliptical hole with an edge crack subjected to uniform magnetic field. Using a rational mapping function, each solution is obtained as a closed form. The linear constitutive equation is used for these analyses. According to the electro-magneto theory, only Maxwell stress is caused as a body force in a plate. In the present paper, it raises a plane stress state for a thin plate, the deformation of the plate thickness and the shear deflection. Therefore the magneto elastic stress is analyzed using Maxwell stress. No further assumption of the plane stress state that the plate is thin is made for the stress analysis, though Maxwell stress components are expressed by nonlinear terms. The rigorous boundary condition expressed by Maxwell stress components is completely satisfied without any linear assumptions on the boundary. First, magnetic field and stress analyses for soft ferromagnetic material are carried out and then those analyses for paramagnetic and diamagnetic materials are carried out. It is stated that those plane stress components are expressed by the same expressions for those materials and the difference is only the magnitude of the permeability, though the magnetic fields H_x, H_y are different each other in the plates. If the analysis of magnetic field of paramagnetic material is easier than that of soft ferromagnetic material, the stress analysis may be carried out using the magnetic field for paramagnetic material to analyze the stress field, and the results may be applied for a soft ferromagnetic material. It is stated that the stress state for the magnetic field H_x, H_y is the same as the pure shear stress state. Solutions of the magneto elastic stress are nonlinear for the direction of uniform magnetic field. Stresses in the direction of the plate thickness and shear deflection are caused and the solutions are also obtained. Figures of the magnetic field and stress distribution are shown. Stress intensity factors are also derived and investigated for the crack length.     

On the problem of crack system with an elliptic hole

The problem of cracks with an elliptic hole in an infinite plane is investigated. By introducing the fictitious loads on the hole edge and using the Muskhelishvili method, the problem is reduced to solving a system of mixed-type integral equations in which some are Fredholm equations but others Cauchy-type singular ones. A numerical method is suggested and can be used for the treatment of other similar equations. The numerical results for some typical examples are given, showing that the method is really effective.